NEW DESIGN! over 8x the storage in the Innovative Wall Cabinet

Поделиться
HTML-код
  • Опубликовано: 21 сен 2024
  • That's right, 8x plus, storage for this cabinet. I do the math at the end of the video.
    Stealth Mask Respirator: stealthmask.co...
    TACKLIFE Circular Saw 5.8A 3500 RPM: amzn.to/2PDGpJC
    This channel in part is funded by viewers like you. Please help me continue to creating videos by becoming a patron.
    / pawpawsworkshop
    You can also support my channel through Paypal
    www.paypal.me/...
    Comments or questions My email is:
    PawPawsWorkShop411@gmail.com
    Link to Laser: jtechphotonics...
    Link to Z axis and CNC machine kits and parts for DIY CNC
    cnc4newbie.com
    Demon Controller By Designs by Phil:
    cnc4newbie.com...
    WOW! 15% OFF offer. Used the code below to take advantage of this fantastic offer.
    Affiliate Link to Purchase STARBOND GLUE:
    15% OFF PROMO CODE pawpawsworkshop15
    www.starbond.com?rfsn=2376834.ca9c16
    _______________________________________________________________________________________________
    AMAZON AFFILIATE LINKS:
    As an Amazon affiliate I earn from qualifying purchases:
    Link to My Amazon Affiliate Store:
    www.amazon.com...
    Frequently needed supplies:
    FOXAlien 4040xe link: www.amazon.com...
    Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
    DeWalt 611 Router: amzn.to/2Sp7H6l
    90 degree v-bit: amzn.to/2WspRDf
    60 degree v-bit: amzn.to/2sYTK0k
    Freud bottom cutting bits: amzn.to/2H30R00
    Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
    Oramask 813 12"x10' Roll amzn.to/2VrrUe5
    Oramask 813 12"x20' Roll amzn.to/2ViovxQ

Комментарии • 71

  • @mjremy2605
    @mjremy2605 7 месяцев назад +3

    Very good job. It gets better and better as I watch these cabinets.
    I wish you had spent some time showing us how the final doors work and hinge section, open up the cabinet at the end. That was frustrating. Finished pictures show how each piece looks once assembled and very necessary.
    The concept is brilliant, thank you!

    • @PawPawsWorkShop
      @PawPawsWorkShop  7 месяцев назад

      The concept of the hinge is very simple. I just use a spacer underneath the hinge that I cut out on the CNC. The pin at the bottom is 1/2”. Same thickness as the plywood hinge. The pin at the top must be longer. You will need about 1 1/8” long which allows the door panel to be removed. Hope this helps

  • @jimbob6216
    @jimbob6216 3 года назад +4

    I started watching 16 seconds after it was posted. It says no views but already has a thumbs up

    • @PawPawsWorkShop
      @PawPawsWorkShop  3 года назад +2

      Yes, computer has a hard time keeping up. You should see it on my end. Numbers often take a while to catch up. Thank you very much.

  • @tonydel77
    @tonydel77 11 месяцев назад +1

    I'm in the process of doing a major reorg of space in my 2-car garage shop and decided that your awesome storage cabinet would feature prominently in replacing the 5'x7' Rubbermaid shed which used to store all of my small tools and supplies but was taking up much needed floor space.
    So I built a dividing wall out of 2x4s and plywood panels (8'x8') and the 5ft x 2.5ft x 17" storage cabinet now hangs on one side of that wall on the upper part of the wall. I can now put my jointer, thickness planer, benchtop drill press and soon to be acquired drum sander, all on mobile bases, under the storage cabinet. I think when I'm finished loading it, most of the stuff previously housed in the Rubbermaid shed will fit into the new cabinet.
    Awesome design sir! You continue to inspire me.

    • @PawPawsWorkShop
      @PawPawsWorkShop  11 месяцев назад

      Thank you very much. I love your ideas for organizing your shop

  • @BossSpringsteen69
    @BossSpringsteen69 3 года назад +1

    Wow, Paw Paw out did himself. Thanks Paw Paw. Excellent work.

    • @PawPawsWorkShop
      @PawPawsWorkShop  3 года назад

      Thank you very much. I really appreciate that.

  • @minniesur
    @minniesur 3 года назад +3

    To the two idiots who gave this video a thumbs down: You only wish you had half the knowledge that this guy has in his sock drawer..This is INGENIOUS! 🤘

  • @markoakley6448
    @markoakley6448 11 месяцев назад +1

    What a fantastic design, the best I have seen yet. I have to give this a go as it will be perfect for my tiny workshop.

    • @PawPawsWorkShop
      @PawPawsWorkShop  11 месяцев назад

      Fantastic! I placed the file for the bracket to cut out with the CNC on my PATREON site if you are interested.

  • @merlewarnsholz2094
    @merlewarnsholz2094 3 года назад +2

    Once again, a very, very good use of wall space. Thanks for sharing.

  • @ronnorris1504
    @ronnorris1504 2 года назад +2

    Only word that comes to mind, Amazing video. Hope to be able to build this in near future, Thanks!

    • @PawPawsWorkShop
      @PawPawsWorkShop  2 года назад

      Thank you so very much. Best of success in building your own

  • @guywoodward9043
    @guywoodward9043 3 года назад +3

    you're timing is impeccable! I have a wall that I was designing for tool storage. My area for hanging the cabinet is slightly larger approximately 9' long, but I was looking thru videos to see what others have created. I need to maximize the space and this design is perfect for what I am looking to do. I love the Hinge Idea. Time to break out the Shapeoko and get to cutting!!

    • @PawPawsWorkShop
      @PawPawsWorkShop  3 года назад +1

      Glad it was helpful! There is so much storage space that I have yet to fill it up

  • @bricklemeyer66
    @bricklemeyer66 3 года назад +3

    I just want to thank you for sharing all your great ideals. I’m going to start my own storage space but I’m going to use my existing cabinets and gut them use your great ideal they are not as wide but I know I can get lot more storage using this ideal. Thanks again

  • @מעייןהמלבלבתחייםםםם
    @מעייןהמלבלבתחייםםםם 3 года назад +2

    Congrats for the 100k!!!!😊 . Thanks for the great video!!

  • @TheFalconJetDriver
    @TheFalconJetDriver 3 года назад +6

    I want to know how you are going to remove the tools in the right corner of the bottom of the cabinet, the screw drivers. just yanking your chain. but it does look like they are trapped.

    • @PawPawsWorkShop
      @PawPawsWorkShop  3 года назад +1

      Yes, they are trapped. There new home will be inside the cabinet

    • @BossSpringsteen69
      @BossSpringsteen69 3 года назад +1

      LOL i just saw that at the end. Paw Paw says he's on the case. He's on it like a hornet.

  • @davidclayton6521
    @davidclayton6521 Год назад +1

    I am for sure going to make 2 of these for hand tools and other things like saw blades . I hate tool boxes and drawers because I always find my self opening multiple drawers to find things

    • @PawPawsWorkShop
      @PawPawsWorkShop  Год назад

      Awesome. I love mine. It works great and I am constantly adding more and more tools

  • @ctfeet1
    @ctfeet1 2 года назад +2

    Great video! I really like this idea - think I'm going to have to make my own. Would you be willing to share the design of the top and bottom hinge?

  • @stevenlengyel9701
    @stevenlengyel9701 9 месяцев назад

    I. Really excited to see this one. I’m completely out of room.

  • @brandonbevan6426
    @brandonbevan6426 3 года назад +2

    Great build👍. Why not make your life easier with a French cleat even heavier cabinets are easier to install by yourself

    • @PawPawsWorkShop
      @PawPawsWorkShop  3 года назад

      Many of my cabinets and wall racks are on French cleats. Both methods are great

  • @lunnymav
    @lunnymav 3 года назад +2

    Looks great!!!

  • @joeyleerobbins
    @joeyleerobbins 2 года назад +2

    I watched a video saying carpet tape is a better method than using the glue and painter's tape, have you tried that method? This cabinet is AWESOME! I plan to make one thank you for doing this video!!!!

    • @PawPawsWorkShop
      @PawPawsWorkShop  2 года назад

      Thank you very much. Yes, the cabinet is amazing. It holds more than I expected. No, I have not used the carpet tape.

    • @joeyleerobbins
      @joeyleerobbins 2 года назад +1

      @@PawPawsWorkShop I have learned so much from your videos! I am about to buy the X Carve because of your videos! I will use your affiliate link as a way to say thanks for your help and for you putting out such great content for people like me!

  • @foxalien_official
    @foxalien_official 3 года назад +2

    Great video!!! Thanks for sharing your skill.

  • @reubenrosofsky4791
    @reubenrosofsky4791 Год назад

    Wow amazing video just in time I'm just about to build another 30 inch cabinet for the shop wall but instead of using solid panels for the dividers I'm gonna use PVC pegboard.

  • @ayotaamer
    @ayotaamer 3 года назад +1

    Beautiful idea thank you 💐❤️🇮🇶

  • @henryrossouw930
    @henryrossouw930 Год назад +1

    Brilliant.

  • @GraemePayne1967Marine
    @GraemePayne1967Marine 2 года назад +3

    At 1:15 -- information on the tabletop drafting board please?

    • @PawPawsWorkShop
      @PawPawsWorkShop  2 года назад +1

      At 2:39 is the result of my drawing. I’m old school, I can draw it easier and work out the problems and then draw the final version in the software

  • @JohnColgan.
    @JohnColgan. 3 года назад +2

    Nice build, I might try that. Great design & strong build.
    Have you tried Odd Leg staples? Angled points make the staple legs go opposite directions, instant skew nailing!
    PS. I can't find the link for your dust mask ??

    • @PawPawsWorkShop
      @PawPawsWorkShop  3 года назад +1

      No, I have not tried those staples. The link for the mask is in the description.

  • @johnfithian-franks8276
    @johnfithian-franks8276 3 года назад +3

    An excellent use of space, my only question is how are you going to get the screwdrivers out that are just below and into the corner?

    • @PawPawsWorkShop
      @PawPawsWorkShop  3 года назад +3

      That’s coming off the wall and in the cabinet

  • @knockoutproductions3796
    @knockoutproductions3796 2 года назад +2

    Hi paw paw just wanted to ask how are you going to get your screwdrivers out lol
    Thank you so much for this video it’s such a good idea and I love the fact that you still use your drawing board and well as your computer
    It’s a case of what came first the chicken or the egg.I still use my drawing board.
    Keep up the good work your doing thanks bro.

  • @toddschulz812
    @toddschulz812 Год назад +1

    Nice build. Do you have any updated pictures of the cabinet filled with tools?

    • @PawPawsWorkShop
      @PawPawsWorkShop  Год назад

      I’m doing an update as we speak. Thanks for watching

  • @lunnymav
    @lunnymav 3 года назад +3

    Those poor screwdrivers in the corner. There’s no way to get them out!!!!
    Awesome build though. Just hope you can’t figure out a fix for those.

  • @stevenlengyel9701
    @stevenlengyel9701 9 месяцев назад

    I’m still a paper and pencil guy also

  • @reubenrosofsky4791
    @reubenrosofsky4791 Год назад +1

    I was wondering if you were willing to share the cut file for the hinges?

  • @MrShneeblie
    @MrShneeblie 9 месяцев назад +1

    Question please, what size and thickness are your panels inside the cabinet? I did not catch it in the video, especially the thickness. Thank you sir.

  • @darrellrichards2133
    @darrellrichards2133 2 года назад +1

    How big would the brackets have to be to hold 4x8 pegboards

    • @PawPawsWorkShop
      @PawPawsWorkShop  2 года назад

      I do not think this will work for a 4x8 pegboard. The weight most likely will be to great to support on the pivot points

    • @darrellrichards2133
      @darrellrichards2133 2 года назад +1

      Ok thanks

  • @stevenlengyel9701
    @stevenlengyel9701 9 месяцев назад +1

    Never lend your tools out. Ha ha

    • @PawPawsWorkShop
      @PawPawsWorkShop  9 месяцев назад

      I loan out my tools to all my kids. Sometimes it’s hard to get them back lol

  • @ohske
    @ohske 3 года назад +2

    👍👍👍👌❤

  • @LutzCnC
    @LutzCnC Год назад +1

    Plans?

    • @PawPawsWorkShop
      @PawPawsWorkShop  Год назад

      No, I do not have plans. You have all the information in the video to make your own. Thank you very much

  • @RobertSchoenert
    @RobertSchoenert Год назад +1

    How do you get the screwdrivers out?

    • @PawPawsWorkShop
      @PawPawsWorkShop  Год назад +1

      Just open the cabinet door and lift them out. There is plenty of room