That's absolutely perfect and helpful. Would you mind doing a rail track for us as well please. Its quite similar to this but the rail track itself I have some problems with modeling it and I much appreciate your help. I think you are the only one who can help me as I didn't find any other resource as helpful as yours.
I have a question. Is it possible to analyse the behaviour of the road under traffic load with Plaxis 2d? I need to do this for my thesis, but I did the analysis with Plaxis 2d. I defined a dynamic load at a certain line. will this give the correct result? I need comments from everyone who reads this question. thank you all
Hi ... Can you help me please... I am using plaxis 3D dynamic V20 to simulate the earthquake applied on piled raft. the raft is plate and the piles is embedded beam with uniform static load and elcentro earthquake... The model is very slow in the analysis and calculation phase and takes about 60 hours. Do I have a problem or is there a way to speed up the calculations??
Can Plaxis 3D (FEM) be used for slope stability calculations? I don't see examples for this. There are only examples for Plaxis 3D LE, but not for FEM.
I don't think you have to have dedicated graphics card to run Plaxis. However, to be sure about that, you should visit Plaxis website to check its requirements.
Hello and once again many thanks for your helpful videos. I really need your help with something for my project. I have an asphalt rd constructed on very shallow ground, reinforced with stone columns. It's an extremely slow process. Specifically the dynamic phase of my model. I have done exactly what you teach with only difference that there is no ground improvement in your model. Can I have your email address please and ask my question. I really really appreciate your help.
Can I send you an email or call you please? Tried to connect with you on Facebook page. I do everything exactly as you teach. The dynamic phase is extremely slow. I wonder why!! Is it because of stone columns? Please advise.
Very useful video. This whole PLAXIS series is helping me through my thesis!
That's absolutely perfect and helpful. Would you mind doing a rail track for us as well please. Its quite similar to this but the rail track itself I have some problems with modeling it and I much appreciate your help. I think you are the only one who can help me as I didn't find any other resource as helpful as yours.
Thank you. I’ll put it in my upcoming video list.
absolutely perfect and helpful. Thank u so much
Hello I have a problem.
When I reach to the moving load it did not work for me
Plaxis showed me this message.. this feature is available under the plaxis VIP
This one is really well explained and useful. Can we have Geocell video on PLAXIS 3D in upcoming videos?
Sure. We will consider this in our upcoming video list. Thanks.
Thanks a lot. this is helpful.
Thanks so much
I have a question. Is it possible to analyse the behaviour of the road under traffic load with Plaxis 2d? I need to do this for my thesis, but I did the analysis with Plaxis 2d. I defined a dynamic load at a certain line. will this give the correct result? I need comments from everyone who reads this question. thank you all
Hi ... Can you help me please... I am using plaxis 3D dynamic V20 to simulate the earthquake applied on piled raft. the raft is plate and the piles is embedded beam with uniform static load and elcentro earthquake... The model is very slow in the analysis and calculation phase and takes about 60 hours. Do I have a problem or is there a way to speed up the calculations??
Hello sir, Can you suggest which parameters in plaxis depends on the deflection
stiffness of soil or materials play important parameters in deformation/deflection
Can you please provide a video on any dynamic centrifuge modelling?
Can Plaxis 3D (FEM) be used for slope stability calculations? I don't see examples for this. There are only examples for Plaxis 3D LE, but not for FEM.
thank you for this work. I want know version of program used for this presentation
Thank you. This is the Plaxis 3D v20.
In my plaxis program ı dont have "Add point movement" section could you help me about this ?
You probably need to check your license type because some functions is only available for a certain license.
Can I do it as my final year project
Can we have ground improvement (CMC) video on PLAXIS 3D in upcoming videos?
_pointmovement is not available in my plaxis 3d, can u plz tell me why?
mine is a cracked version
You might need to check license type of your Plaxis. Some features is not available in a certain type of Plaxis license.
I tried this one but I keep got warning code:4, do you have any idea?
honestly perfect...pls how do i get this 3d version of plaxis for free pls...if anyone has then share link pls...thx
Do we need dedicated graphics card to run plaxis
I don't think you have to have dedicated graphics card to run Plaxis. However, to be sure about that, you should visit Plaxis website to check its requirements.
Can you share this software?
You can search in lavteam or damasgate website. However, if you like the products, please support them by buying them.
Hello and once again many thanks for your helpful videos.
I really need your help with something for my project.
I have an asphalt rd constructed on very shallow ground, reinforced with stone columns. It's an extremely slow process. Specifically the dynamic phase of my model. I have done exactly what you teach with only difference that there is no ground improvement in your model.
Can I have your email address please and ask my question.
I really really appreciate your help.
Can I send you an email or call you please? Tried to connect with you on Facebook page. I do everything exactly as you teach. The dynamic phase is extremely slow. I wonder why!! Is it because of stone columns? Please advise.
Could you make a video about Geogrid ?
I will put it in my upcoming video list.
@@EngineerHunter Thank you so much :)
@@ertgrlvrm55I just uploaded a new video here. ruclips.net/video/vZZwGi0EK-o/видео.html
@@EngineerHunter Thank you so much !