Not sure if you’re still using this RUclips channel but brother, I appreciate this video so much. Got stumped on finding the parking light wire but you helped me find it. God bless!!
@@solarillusiontint I have a question would u happen to know how to program or how the avital 4105L works I installed it and did everything you said on the video but it won’t start and randomly the truck tries to start without pressing the button it fails three times and it turns on on the fourth try but then I can’t shut it off unless I disconnect the whole module
Hey man I just have to say, THANK YOU THANK YOU THANK YOU SO MUCH!!!!! I was having serious doubts as I couldn’t find envy thing helpful on the internet and after about a week of searching I found this video. You saved me about $700 which is what the stereo shop quoted me for this. Once again you are awesome and thank you so much for the most helpful video I have ever watched!
Thanks for posting. Hard to get any good DIY info on these first gen tundras. I’ve done plenty of cutting and soldering but haven’t messed with ignition wires before. This is the just the nudge I needed to take the plunge. Wish the video was complete start to finish but I think you covered most of the unique aspects of this install and liked seeing some of your techniques that I will start using.
Using your video I was able to install a remote start with keyless entry on my 2001 Tundra! Pretty sweet using a remote to get in instead of a key, and now I can remote start on these cold winter days 😎. Do you happen to have the color of the parking lights wire on hand? Ended up skipping that since I didn’t want to cut into a bunch of wires without having something specific to work for. Thanks for the video!
@@securetalk I didn’t use a relay or a tach wire. Under the steering column should have all the applicable ignition, constant, acc, starter, etc. wires minus the parking lights and a ground. Other than that, I used the smaller connector as shown in the video to connect to the unlock/lock, hood pin, brake wire. Colors in other comments were accurate for my Tundra ChatGPT seems to think the parking wire should be green/white. Haven’t looked further into this yet myself.
I'm so glad you decided to put music in your video because I'm having a horrible time with getting my parking lights to go off on my 4runner. The only way they go off is when I turn my headlights on but when I shut them off they turn back on and yes the switch is off all the way, it's not on the MARKer light position and there is no daytime running lights. I have the pinky amber bulbs that are only supposed to come on when you use the automatic car starter. If you use the key none of the lights are supposed to turn on unless I turn them on. But now my marker/turn signal lights are always on no matter if I do key or auto starter. The only way to shut off is the way they are supposed to be on when turning on your headlights. So being that I'm having a horrible situation and day besides my rig. It wouldn't be fitting if I could actually hear wtf you are trying to say as it is but thankfully you added music so I definitely can't hear any useful information that would be helpful so I can get pissed off and make a small problem into a very big and expensive problem. Happy birthday to me. Oh yeah the douches that installed my BLADE CM7200 USING T-TAPS AND I HAVE 1 MALE T-TAP WIRE LEFT OVER ITS THE GREEN/WHITE WIRE THAT SAYS LIGHT OUTPUT FIXED OUTPUT THAT IS NOT HOOKED TO ANYTHING. THERE IS TWO FEMALE T-TAPS ON A BIG RED/POSITIVE CONSTANT WIRE AND A BLACK/NEGATIVE/GROUND. WTF DO I DO. OH I CAN'T TAKE IT BACK BECAUSE THEY WENT OUT OF BUSINESS. THEY ALSO OWE ME 3 REMOTE BASS KNOBS FOR MY AMPS AND A NEW AMPLIFIER FOR FRYING MY MOST FAVORITE 4 CHANNEL AMPLIFIER THAT IN MY OPINION IS THE GREATEST ONE EVER MADE AND IT WAS THE 2014 BLAUPUNKT 750 I THINK. THE CROSSOVERS ARE RIDICULOUSLY AMAZING. YOU GOT HIGH, MID, SUBSONIC, GAIN AND CROSSOVER HZ LEVEL CONTROL AND A SUBWOOFER OUTPUT WITH GAIN, SUBSONIC, LOWPASS, AND PHASE AND USING THIS BNB OUTPUT INCREASES YOUR SUBWOOFER AMPLIFIERS 20% BETTER
Great video I’d love to install this on my tundra but electronics scare me for the fact I might mess something up and when he started cutting every wire in sight I got some anxiety 😂
Excellent work. Thanks for the explanation. I have a 03’ Sequoía that will randomly try to start itself while sitting in the driveway. I popped the panel off and see some T-taps. I’m hoping I can remove and after market wiring and get rid of my zombie car symptoms.
Thank you sir for all the information!. If you don't mind me asking how did you "do the hard part" and find the park lights strip every wire or go off via diagram and hunt ? Haha. As i need improvement on finding wires sometime thank you!
Hi, i have a question. Can you help me, i bought a car a few weeks ago a Lexus es330. I want to put a compustar 4900s 2 way remort start sysem. I limed you viedo but will it work if i followed it?
I know you didn’t show it, but for the door lock relay, did you put all that in the door panel? Or did you find the wiring from the door panel in the kick panel? Are those two wires you solder last coming from the door panel?
@@calebbay8372 Thanks for the response. I think its completely dependent on the wiring config of your car, as mine just worked with no relay upon install. I advise anyone doing this project to try to understand what specific input is needed to trigger lock and unlock in their respective vehicle.
I find a guy who does remote start , he told me In order to do remote start for my 01 sequoia , I have to loose a key , lol , man , I only have one key , what the heck Toyota
Friend, it seem you are looking for a product like the video show,it is happen to we have the similar product,we have 4G gsm gps car alarm,smart watch car key car alarm ,liquid crystal key,watch key smart car alarm,remote start module...so on. maybe you will interesting in one of them.you can look at my youtube know more,if you like it,you can add me whatsapp: +86 13417625973 WeChat：+86 13417625973 keyless entry，remote start，push start... 4G gps mobile phone control car：www.ebay.com/itm/273785328395 liquid smart key control car：www.ebay.com/itm/284267230545 smart watch control car：www.ebay.com/itm/284302869970
Hello Great video i'm installing same remote start on my 1997 Toyota Camry LE 2.2 liter had a question from the remote start module which wire is for trunk pop if you don't mind answering the question. Thank you.
Greetings brother. I purchased the compustar 8900As. Im a bit confused with the cn3 (18 pin connector) which wires are recommended to let the system work optimally as Im about to install it on my 2001 model lexus ls430 with fob key ?
If I just wanted use the keyless entry portion of this system, what are the minimum connections I would need to make? I have red power, red/white power and ground connected and the door connections made. I checked the door connections and I can lock/unlock the door just be grounding those wires manually, however, I haven’t been able to get the unit to do anything yet. Thank you for any help you can provide.
My 04 mustang gt has 2 ignition 2 accessory wires and my cm900 box has the jumper function setting on ignition and I can use the blue wire for ignition 2 so now I’m stranded for connecting to my 2nd vehicle accessory wire any ideas? Or can I just connect the one accessory wire to accessory one and it will work anyway?
So I’ve done everything you did in this video which by the way is awesome but for some reason when I turn my key off the truck doesn’t shut off and yes I have a 2006 Toyota Tundra
That sounds to me like it’s not recognizing the break shut down. The way to test that is to remote start it and then hit the break after about 60 seconds of it running and that should shut the vehicle off if the brake trigger is working properly.
You will have to test the wires, but if you’re looking for a positive trigger headlight wire, it should be in the driver kick panel green wire, 14 pin plug. or you can grab them at the headlight switch green wire as well but it is a negative trigger once again, please test the wires.
There are a lot of good services out there that offer wiring diagrams. If you have you are a Compustar dealer they offer wire diagrams. If you are a DEI dealer they offer wire diagrams,or if you would like a free one the 12volt.com has free wire diagrams.
Hi I have a question, can you help me with to put compustar 920S to a 2005 Lexus es330, I can’t find the unlock wire for the door of the car. And I can’t find the parking light wire
So on that particular vehicle you either have to run wires into the door to the ECU or five wire the door locks, and it says the lock wire is blue /red in the drivers kick panel and the unlock wire is blue /black in the drivers get panel
Keep in mind the parking lights on that vehicle have a positive trigger that is a green wire bottom of the fuse box or at the headlight switch. It is a red wire that is a negative trigger.
Great video. Would you be able to help in locating the door unlock and lock wires for a 1992 Honda Accord EX, the documentation I have is incorrect regarding wire color and location
Does door lock's are a little tricky and depending on where you go will depend on the color and the location those are what are considered a 5 wire door lock system meaning you need to relays to run it
For all who are wondering, the door locks are in the kick panel. Lock is green/black, unlock is red/yellow. The best way I can explain which one is that both wires will be in the same harness coming out of the door
My cm900 has a Green/White wire for Parking Light (+). It also has ANOTHER Green/White wire for Parking Light (-). My wire diagram: Parking Lights (+) Red/Orange (LF); Orange (RF); Green/Black (LR); Brown/Black (RR) + Dash Fuse Box, black 38 pin plug (D), pins 3, 10; white 38 pin plug (A), pins 14, 24 Parking Lights MUX Blue - 1680 Ohms Headlight-Wiper Switch, black 16 pin plug, pin 14 Am I supposed to connect both Parking Light + and - ? Or just whatever my vehicle offers. Which only seems to be a Negative. Car is 2018 Hyundai Elantra Remote Start is the Compustar 4900s
friend, it seem you are looking for a product like the video show,it is happen to we have the similar product,we have 4G gsm gps car alarm,smart watch car key car alarm ,liquid crystal key,watch key smart car alarm,remote start module...so on. maybe you will interesting in one of them.you can look at my youtube know more,if you like it,you can add me whatsapp: +86 13417625973 WeChat：13417625973 keyless entry，remote start，push start... 4G gps mobile phone control car：www.ebay.com/itm/273785328395 liquid smart key control car：www.ebay.com/itm/284267230545 smart watch control car：www.ebay.com/itm/284302869970
Do I need ant relays on a 2000 tundra? Imade all the same connections that were also made in the video and it will not respond to any commands from the remote. The antena light does flash red so I know its at least getting power.
@@solarillusiontint are there any other words that need to be connect other than the ones you spoke about in the beginning of the video? I just checked all my connections and everything seems good. However, I still am not getting any response from the remotes that came with the remote starter.
Friend, it seems you are looking for a product like the video show,it is happen to we have the similar product,we have 4G gsm gps car alarm,smart watch car key car alarm ,liquid crystal key,watch key smart car alarm,remote start module...so on. maybe you will interesting in one of them.you can look at my youtube know more,if you like it,you can add me whatsapp: +86 13417625973 WeChat：13417625973 keyless entry，remote start，push start... 4G gps mobile phone control car：www.ebay.com/itm/273785328395 liquid smart key control car：www.ebay.com/itm/284267230545 smart watch control car：www.ebay.com/itm/284302869970
you mention if i heard it right a "HOOD PEN"? what is a "HOOD PEN"? (you said that "somebody might start the vehicle with the remote start active?) pls advice...thanks
The hood pin Usher's that the hood is closed at all time or the remote start will not work it is just a pin switch that when the hood is closed it pushes down not creating any kind of ground then when the hood is open it pushes up creating or ground telling the remote start not to start it's a safety feature so if somebody is working on the vehicle it will not allow them to accidentally start the vehicle with the key fob in their pocket or something of that nature
Yes you are correct I personally like all of the Compustar products I think they are the best they are the leader in all automotive security and remote starts DEI which owns viper was purchased by audio box and not only that I think Compustar has the best tech-support if you need that service
I have a 06 Toyota tundra. Do I have to wire in the locks? I still would like to retain the factory fob. Only plan to use remote start during winter months.
Not sure if you’re still using this RUclips channel but brother, I appreciate this video so much. Got stumped on finding the parking light wire but you helped me find it. God bless!!
I am so glad that it helped you out. I haven’t made videos in a long time but I do plan on getting back to it.
Very clean installation..you take pride in your work. We need more installers like you. Thank you for this video.
Thank you so much for your kind words.
@@solarillusiontint I have a question would u happen to know how to program or how the avital 4105L works I installed it and did everything you said on the video but it won’t start and randomly the truck tries to start without pressing the button it fails three times and it turns on on the fourth try but then I can’t shut it off unless I disconnect the whole module
Hey man I just have to say, THANK YOU THANK YOU THANK YOU SO MUCH!!!!! I was having serious doubts as I couldn’t find envy thing helpful on the internet and after about a week of searching I found this video. You saved me about $700 which is what the stereo shop quoted me for this. Once again you are awesome and thank you so much for the most helpful video I have ever watched!
You are so very welcome Dennis‼️
Thanks for posting. Hard to get any good DIY info on these first gen tundras. I’ve done plenty of cutting and soldering but haven’t messed with ignition wires before. This is the just the nudge I needed to take the plunge. Wish the video was complete start to finish but I think you covered most of the unique aspects of this install and liked seeing some of your techniques that I will start using.
Fantastic I am so glad you enjoyed the video if you have any questions please let us know
Using your video I was able to install a remote start with keyless entry on my 2001 Tundra! Pretty sweet using a remote to get in instead of a key, and now I can remote start on these cold winter days 😎.
Do you happen to have the color of the parking lights wire on hand? Ended up skipping that since I didn’t want to cut into a bunch of wires without having something specific to work for. Thanks for the video!
@@securetalk I didn’t use a relay or a tach wire. Under the steering column should have all the applicable ignition, constant, acc, starter, etc. wires minus the parking lights and a ground.
Other than that, I used the smaller connector as shown in the video to connect to the unlock/lock, hood pin, brake wire. Colors in other comments were accurate for my Tundra
ChatGPT seems to think the parking wire should be green/white. Haven’t looked further into this yet myself.
Amazing to see the level of your talent. I have no idea of how you know what goes where, but is very good vid and well produced . Good job.
Excellent insight for my pending Compustar CS7900-AS All-in-One 2-Way Remote Start installation on my 06 Tundra!
Nice you will have to tell what you think when you get it done sir
I'm so glad you decided to put music in your video because I'm having a horrible time with getting my parking lights to go off on my 4runner. The only way they go off is when I turn my headlights on but when I shut them off they turn back on and yes the switch is off all the way, it's not on the MARKer light position and there is no daytime running lights. I have the pinky amber bulbs that are only supposed to come on when you use the automatic car starter. If you use the key none of the lights are supposed to turn on unless I turn them on. But now my marker/turn signal lights are always on no matter if I do key or auto starter. The only way to shut off is the way they are supposed to be on when turning on your headlights. So being that I'm having a horrible situation and day besides my rig. It wouldn't be fitting if I could actually hear wtf you are trying to say as it is but thankfully you added music so I definitely can't hear any useful information that would be helpful so I can get pissed off and make a small problem into a very big and expensive problem. Happy birthday to me. Oh yeah the douches that installed my BLADE CM7200 USING T-TAPS AND I HAVE 1 MALE T-TAP WIRE LEFT OVER ITS THE GREEN/WHITE WIRE THAT SAYS LIGHT OUTPUT FIXED OUTPUT THAT IS NOT HOOKED TO ANYTHING. THERE IS TWO FEMALE T-TAPS ON A BIG RED/POSITIVE CONSTANT WIRE AND A BLACK/NEGATIVE/GROUND. WTF DO I DO. OH I CAN'T TAKE IT BACK BECAUSE THEY WENT OUT OF BUSINESS. THEY ALSO OWE ME 3 REMOTE BASS KNOBS FOR MY AMPS AND A NEW AMPLIFIER FOR FRYING MY MOST FAVORITE 4 CHANNEL AMPLIFIER THAT IN MY OPINION IS THE GREATEST ONE EVER MADE AND IT WAS THE 2014 BLAUPUNKT 750 I THINK. THE CROSSOVERS ARE RIDICULOUSLY AMAZING. YOU GOT HIGH, MID, SUBSONIC, GAIN AND CROSSOVER HZ LEVEL CONTROL AND A SUBWOOFER OUTPUT WITH GAIN, SUBSONIC, LOWPASS, AND PHASE AND USING THIS BNB OUTPUT INCREASES YOUR SUBWOOFER AMPLIFIERS 20% BETTER
Great video I’d love to install this on my tundra but electronics scare me for the fact I might mess something up and when he started cutting every wire in sight I got some anxiety 😂
Nice. Way to show show someone not to fast and very descriptive I will keep watching
thank you for your video! I've learn a lot and have also completed my alarm setup.
I enjoy watching you, great video great job
Excellent work. Thanks for the explanation. I have a 03’ Sequoía that will randomly try to start itself while sitting in the driveway. I popped the panel off and see some T-taps. I’m hoping I can remove and after market wiring and get rid of my zombie car symptoms.
You are most welcome and yes please let me know if that works for you if not I will do my best to help
On 2000-2002 Tundra the door lock wire are located in either kick panel. The colors are White/Green - Lock, Red/Yellow - Unlock
Can you actually show how to wiring relays for the remote start?
Thank you sir for all the information!. If you don't mind me asking how did you "do the hard part" and find the park lights strip every wire or go off via diagram and hunt ? Haha. As i need improvement on finding wires sometime thank you!
Nice vidéo
Professional job
I'm trying to put a compustar remote start in my 2001 holden rodeo I gotta try and hook it up myself because my auto electrician will not do it
Hi, i have a question. Can you help me, i bought a car a few weeks ago a Lexus es330. I want to put a compustar 4900s 2 way remort start sysem. I limed you viedo but will it work if i followed it?
I know you didn’t show it, but for the door lock relay, did you put all that in the door panel? Or did you find the wiring from the door panel in the kick panel? Are those two wires you solder last coming from the door panel?
This can be used for a 01 to 06 tundra?
Where did u install the green Wire too? It skipped it.
Is a relay needed in this install? If so, where would I wire it?
@@calebbay8372 Thanks for the response. I think its completely dependent on the wiring config of your car, as mine just worked with no relay upon install. I advise anyone doing this project to try to understand what specific input is needed to trigger lock and unlock in their respective vehicle.
Do you need an extra key for this installation?
I find a guy who does remote start , he told me In order to do remote start for my 01 sequoia , I have to loose a key , lol , man , I only have one key , what the heck Toyota
Friend, it seem you are looking for a product like the video show,it is happen to we have the similar product,we have 4G gsm gps car alarm,smart watch car key car alarm ,liquid crystal key,watch key smart car alarm,remote start module...so on. maybe you will interesting in one of them.you can look at my youtube know more,if you like it,you can add me
whatsapp: +86 13417625973
WeChat：+86 13417625973
keyless entry，remote start，push start...
4G gps mobile phone control car：www.ebay.com/itm/273785328395
liquid smart key control car：www.ebay.com/itm/284267230545
smart watch control car：www.ebay.com/itm/284302869970
Hello Great video i'm installing same remote start on my 1997 Toyota Camry LE 2.2 liter had a question from the remote start module which wire is for trunk pop if you don't mind answering the question. Thank you.
What unit are you installing? If you don’t mind me asking model number please
@@solarillusiontint Hello thank you for reply the model # is CS925-S COMPUSTAR i just wanted to know how to hook up trunk pop. Thanks.
Violet with a white stripe just to keep in mind, that’s a negative trigger
@@solarillusiontint does not come with connecter that connects to the brain . is there any other way to hook up the trunk pop. thanks
Is it missing plugs
Greetings brother.
I purchased the compustar 8900As.
Im a bit confused with the cn3 (18 pin connector) which wires are recommended to let the system work optimally as Im about to install it on my 2001 model lexus ls430 with fob key ?
If I just wanted use the keyless entry portion of this system, what are the minimum connections I would need to make? I have red power, red/white power and ground connected and the door connections made. I checked the door connections and I can lock/unlock the door just be grounding those wires manually, however, I haven’t been able to get the unit to do anything yet.
Thank you for any help you can provide.
My 04 mustang gt has 2 ignition 2 accessory wires and my cm900 box has the jumper function setting on ignition and I can use the blue wire for ignition 2 so now I’m stranded for connecting to my 2nd vehicle accessory wire any ideas? Or can I just connect the one accessory wire to accessory one and it will work anyway?
So I’ve done everything you did in this video which by the way is awesome but for some reason when I turn my key off the truck doesn’t shut off and yes I have a 2006 Toyota Tundra
That sounds to me like it’s not recognizing the break shut down. The way to test that is to remote start it and then hit the break after about 60 seconds of it running and that should shut the vehicle off if the brake trigger is working properly.
i am having trouble finding the parking light wire the green one more specific where to find?
What is the year make and model of vehicle you’re working on sir?
@@solarillusiontint 02 tundra sr5 ac
You will have to test the wires, but if you’re looking for a positive trigger headlight wire, it should be in the driver kick panel green wire, 14 pin plug. or you can grab them at the headlight switch green wire as well but it is a negative trigger once again, please test the wires.
Do you happen to have wiring diagram or where to get them?
There are a lot of good services out there that offer wiring diagrams. If you have you are a Compustar dealer they offer wire diagrams. If you are a DEI dealer they offer wire diagrams,or if you would like a free one the 12volt.com has free wire diagrams.
@@solarillusiontint thank I will check it out
All the wires except the last two were spliced into a circuit. Did you cut off the plug for the last two wires?
Yes any wires unused will be cut and wrapped with electrical tape.
Hi I have a question, can you help me with to put compustar 920S to a 2005 Lexus es330, I can’t find the unlock wire for the door of the car. And I can’t find the parking light wire
So on that particular vehicle you either have to run wires into the door to the ECU or five wire the door locks, and it says the lock wire is blue /red in the drivers kick panel and the unlock wire is blue /black in the drivers get panel
Keep in mind the parking lights on that vehicle have a positive trigger that is a green wire bottom of the fuse box or at the headlight switch. It is a red wire that is a negative trigger.
Ok,thank you, I’ll try that out
Ok sounds great. Let me know what you find out.
Great video. Would you be able to help in locating the door unlock and lock wires for a 1992 Honda Accord EX, the documentation I have is incorrect regarding wire color and location
Does door lock's are a little tricky and depending on where you go will depend on the color and the location those are what are considered a 5 wire door lock system meaning you need to relays to run it
For all who are wondering, the door locks are in the kick panel. Lock is green/black, unlock is red/yellow. The best way I can explain which one is that both wires will be in the same harness coming out of the door
⁰ⁿ
Does the hood pin need to be installed for the unit to work?
That 100% depends on the type of unit that you install if it is DEI unit yes you need a had pin if it is a compustar no you do not need a hood pin
Where you got the lock and unlocked from
The door lock wires are most of the time found in the driver kick panel
Why i didnt see you wire any relay for this installation?
Unfortunately my camera battery died and I didn't know until later. Sorry!
My cm900 has a Green/White wire for Parking Light (+). It also has ANOTHER Green/White wire for Parking Light (-).
My wire diagram:
Parking Lights (+) Red/Orange (LF); Orange (RF); Green/Black (LR); Brown/Black (RR) + Dash Fuse Box, black 38 pin plug (D), pins 3, 10; white 38 pin plug (A), pins 14, 24
Parking Lights MUX Blue - 1680 Ohms Headlight-Wiper Switch, black 16 pin plug, pin 14
Am I supposed to connect both Parking Light + and - ? Or just whatever my vehicle offers. Which only seems to be a Negative.
Car is 2018 Hyundai Elantra
Remote Start is the Compustar 4900s
If it were me I would just use the negative and use the resistor in line
I have a 2005 Sequoia limited, I’m also looking at tackling this job here in a couple days. Are you required to install the tach wire?
It depends on what type of unit you're using a lot of them now have advanced tactless modes where you do not have to hook up a tach wire
I have the exact same car, I want to install one in my car, please give me some ideas and of course how it's going for you
Also how did you hook up the rear latch door to open and close
My favorite past is soldering wires.
The only way to do it 💯
Does it work with the drone mobile add on ?
Yes it does
@@solarillusiontint does the blade remote starts work with all drone mobile devices and which port do I use if so ?
The blade is just a bypass the module you’re using with the blade Hass to be able to take the drone mobile
How did you get the door locks to function? I followed DOC 1070 and wired up the relay but i am still not getting the locks to cycle.
Are you positive you have the right lock wires.
Hi, thinking about installing this on my 2005 tundra. Where can I get this remote starter.
friend, it seem you are looking for a product like the video show,it is happen to we have the similar product,we have 4G gsm gps car alarm,smart watch car key car alarm ,liquid crystal key,watch key smart car alarm,remote start module...so on. maybe you will interesting in one of them.you can look at my youtube know more,if you like it,you can add me
whatsapp: +86 13417625973
WeChat：13417625973
keyless entry，remote start，push start...
4G gps mobile phone control car：www.ebay.com/itm/273785328395
liquid smart key control car：www.ebay.com/itm/284267230545
smart watch control car：www.ebay.com/itm/284302869970
What if your vehicle only has one 12V constant. Do you just cap and stow the other constant?
If you watch my other video about remote starts it will explain if you only have one power wire
I'm looking to do this to an 06 double cab tundra, is there a bypass kit required for this?
It calls for a bypass I have seen on some of those trucks where they did not put one in though it depends on the key style and type
I have tundra 4,7 sr5 2007 , do I need by pass for remote starter ? Thank you very much !
Yes that one should have a 40 bit encrypted key
So how do you hook up the engine lock relay please
Do you mean a starter kill relay?
Mines called a engine lock relay its got 3 thick yellow wires on it and 1 thin green wire and 1 blue wire
The blue wire is thin aswell I just don't know where thay go
I don't know where any of the wires go to
Yes that is starter kill relay
Will this still start a Toyota truck with an immobilizer or do I have to surrender a key? I have a 2004 sequoia. Thanks.
If you get the proper bypass so you should not have to surrender a key at all
Can you recommend one?
@@ViewlessSquid I personally like the idatalink bypasses
So I got the drone thing but it’s now working
Do I need ant relays on a 2000 tundra? Imade all the same connections that were also made in the video and it will not respond to any commands from the remote. The antena light does flash red so I know its at least getting power.
The remote's come together with the remote start if not you have to program them
@@solarillusiontint yes the remote came with
@@solarillusiontint are there any other words that need to be connect other than the ones you spoke about in the beginning of the video? I just checked all my connections and everything seems good. However, I still am not getting any response from the remotes that came with the remote starter.
Wires*
My recommendation would be to re learn the remotes 1st
Awesome!!😍
Thank you
In desperate need to find the lock and unlock wire for my 2005 Toyota Tundra double cab
Or the 12volt.com
Where and how did you hook up the door lock wires. I've looked for diagrams and can't seen to find one anywhere
For what type of car?
2006 tundra double cab
They are at the driver's door switch.
Inside the door? What color wires do I connect the lock unlock wires from the alarm to?
Yes they are in the door tech doc 1070 from DEI
Where did the mount the brain? Why does no one show this part?
Friend, it seems you are looking for a product like the video show,it is happen to we have the similar product,we have 4G gsm gps car alarm,smart watch car key car alarm ,liquid crystal key,watch key smart car alarm,remote start module...so on. maybe you will interesting in one of them.you can look at my youtube know more,if you like it,you can add me
whatsapp: +86 13417625973
WeChat：13417625973
keyless entry，remote start，push start...
4G gps mobile phone control car：www.ebay.com/itm/273785328395
liquid smart key control car：www.ebay.com/itm/284267230545
smart watch control car：www.ebay.com/itm/284302869970
How to program immobilizer...
You doing on the computer via whatever website of the bypass module you are using.
you mention if i heard it right a "HOOD PEN"? what is a "HOOD PEN"? (you said that "somebody might start the vehicle with the remote start active?) pls advice...thanks
The hood pin Usher's that the hood is closed at all time or the remote start will not work it is just a pin switch that when the hood is closed it pushes down not creating any kind of ground then when the hood is open it pushes up creating or ground telling the remote start not to start it's a safety feature so if somebody is working on the vehicle it will not allow them to accidentally start the vehicle with the key fob in their pocket or something of that nature
Why wouldn't you use a t harness. Isn't it easier.
I wish the words were larger so I could see nothing.
What is the difference between the brain!!??? There are so many different ones which one is the newest and best 😩
Yes you are correct I personally like all of the Compustar products I think they are the best they are the leader in all automotive security and remote starts DEI which owns viper was purchased by audio box and not only that I think Compustar has the best tech-support if you need that service
What a poor video! Needs more detail kill the dam music. Better video filming
I'm glad you liked it!!
Great video. Just had a hard time understanding the verbiage. Music didn't help. Still good video. 👍
I have a 06 Toyota tundra. Do I have to wire in the locks? I still would like to retain the factory fob. Only plan to use remote start during winter months.
Good day do you know if that tundra has a factory security system?