I want to ask you a question based on your experience. Let's use hho gas to power an electric generator. We will also get the electricity for the electrolysis device from this generator. (ignoring your electric first start up action.) What % of the electricity produced is used for electrolysis? What percent is left to run our loads? (For example, a 10 kva diesel generator burns 4 liters of diesel on average. If you want, we can proceed with this example.)
It is impressive but I'm wondering if this new concept can save the user a lot of money when it comes to not only buying the gases for oxy-acetylene but the rentals on the bottles too which is very expensive especially when it isn't used much on the daily basis.
I want to ask something. If we want to feed an electric generator that burns 4 liters of diesel per hour with hho, how many liters of average hydrogen are needed. And how many kW of electricity does this device draw?
some one said (about 15 years ago) that the temp it takes to heat to melting point with hydrogen is equal to the materials melting point. but the flame alone isnt that hot. whats ur thought about that ?
The combustion temperature of hydrogen in oxygen reaches 3000 degrees, but due to the lack of infrared radiation, the high temperature of the burning hydrogen with great difficulty spreads over any distance. In order to generate infracar radiation, the vapor of liquid hydrocarbons is added to the mixture of hydrogen and oxygen.
It creates hydroxy gas....which is 2 parts hydrogen and 1 part oxygen....perfect for combustion....the generator itself makes hho(another name for hydroxy) but hydrogen and oxygen can be seperated...
HHO can cut steel plate nice clean cut. this one is good for heating and welding. not for cutting steel plate that's were it cost a lot of money for oxygen. i have yet to see one under $15.000 grand that dose the job
Metal cutting large thickness requires oxygen. A mixture of hydrogen and oxygen only contributes to the beginning of the process of oxidation of metal during cutting, and then this process should be carried out with pure oxygen.
I know the devices work, but this video presentation seems fake. That much pressure output from just about 21-22 PSI would drop the pressure gauge real fast, but the needle on the gauge is not moving at all. So... yea, it's fake, but it does work, but not like it's being presented. Unless... their is an oxygen tank inside the device that ads the pressurized air flow, & the HHO is softly mixed in to the output line. Now that's a nice machine if it is like that. Otherwise, it's fake. No explanations in the video, so yea. Probably fake, but I know this type of thing actually works, but again, not as it's being presented.
ohh common this is a setup,,no way it was able to generate that much hho and at what seems to be constant high psi ,,even the flame color chemistry tells me this is not hho at equal oxy and hydro pressures ,,you got something else coming out that hose ,more like a propane oxy mix,,and how are you able to press the oxy lever to get more oxy pressure and still have hho as preheating flame?? one hose? right
Good question I've seen systems with two hoses, but hydrogen oxygen mixed together could be incredibly dangerous if it backfired under that extreme pressure....Explosion would be enough to take down the entire building
Unfortunately, this is not possible, the maximum possible electrolysis efficiency can not physically be above 66.6%. Reducing dependence on energy consumption is possible only when using alternative energy sources, wind turbines, solar power plants, or hydroelectric power stations.
If your electric meter is outdated, and if it does not account for reactive energy, then the capacitor will help you to eliminate this shortcoming of stry electricity meters.
Me gustaría poder ponerme en contacto con alguien que de verdad tenga algo que produzca hidrogeno, para hacer de aportación a unas calderas, ya que tengo patentado un sistema de intercambiador, que aprovecha el 100% de cualquier combustión, o lo que es lo mismo no se escapa ni un solo grado por la chimenea, quiero que vean esto ruclips.net/video/BU12PR1HbSo/видео.html el prototipo en este caso es de gas-oíl Saludos
The box is the same as this box. Inside is a powerful electrolysis gas generator that splits water into hydrogen and oxygen. Watch this video, ruclips.net/video/mbNhIFzaiPU/видео.html here you will see an even more powerful gas generator. This device produces more than 3 m3 of combustible gas. If you want to buy such a device, please contact us: www.hydrogen-severs.com
@@SEVERS72 in my country electricity 1kwh costs about 0.17€. 5000w=5kw, so to produce 1500l of HHO costs about 0.85€ (for electricity without expense on electrolyte or other) Today cars use diesel/petrol/gas. The gas price is about 0.57€ per litre. The result for this - this is very economic to run car on HHO isnt am i right? I know thats is a private question, so dont answer if dont want, but if want, then i want to ask - what do you do with this HHO machine? Are you making some money with that or for what purpose do you use that? Thank you.
@@SEVERS72 just now rolled down for more comments and saw answer for my question what are you doing with that machine. Thanks. :) One more question. Have you ever tried to run an engine with HHO that runs an larger alternator to make HHO, and in result there is enough electricity to make HHO for engine and enough to run other electric machines?
@@robertsalmanis9600 I am looking for ways to use water as a fuel. What results are now, it’s absolutely not important, the main thing is that I’m doing something. Sooner or later I will find this method. But if you sit on the couch and look at the chandelier, in this way you definitely won’t achieve anything and you won’t get anything.
@@SEVERS72 i wish to you only the best!;) you are already great. The numbers you are saying are crazy good 5kwh=1500l of HHO, that is less money and much of energy. Just kindly interesting have you tried that - to run engine that runs alternator to get more electricity. If approximately car using 20l of gas for 100km, then HHO is cheap way to move. Ok, once again thanks, and wishing the best to you keep moving on;)
Thats really amazing, the heat is unbelievable, best setup I've ever seen with HHO. Did u build the generator by yourself?
This thing is a monster!!! Well done!
About 120+
Million joules/kilogram
Without harmful exhausting
What a perfect gas ...
Wow! This is amazing flame
Very nice HHO torch!
Brilliant torch of Hydroxy ! Thank you.
It transports you to the galaxies that it echoes the frequency of the universe has the roar of black sky
I want to ask you a question based on your experience. Let's use hho gas to power an electric generator. We will also get the electricity for the electrolysis device from this generator. (ignoring your electric first start up action.) What % of the electricity produced is used for electrolysis? What percent is left to run our loads? (For example, a 10 kva diesel generator burns 4 liters of diesel on average. If you want, we can proceed with this example.)
What you are talking about violates the laws of thermodynamics, and the law of conservation of energy in particular. It's impossible
5742 watts input = 151 watts per liter x 33 liters per minutes. Impressive! (At 20+ psi)
It is impressive but I'm wondering if this new concept can save the user a lot of money when it comes to not only buying the gases for oxy-acetylene but the rentals on the bottles too which is very expensive especially when it isn't used much on the daily basis.
I want to ask something. If we want to feed an electric generator that burns 4 liters of diesel per hour with hho, how many liters of average hydrogen are needed. And how many kW of electricity does this device draw?
What kind of torch are you using for this?
some one said (about 15 years ago) that the temp it takes to heat to melting point with hydrogen is equal to the materials melting point. but the flame alone isnt that hot. whats ur thought about that ?
The combustion temperature of hydrogen in oxygen reaches 3000 degrees, but due to the lack of infrared radiation, the high temperature of the burning hydrogen with great difficulty spreads over any distance. In order to generate infracar radiation, the vapor of liquid hydrocarbons is added to the mixture of hydrogen and oxygen.
I appretiate ur work
+Tarun Shrivastava Do you mean: "I appreciate your work"? Ok! Thanks
ha ha yep i do... :)
How many plates does this device have? Thank you very much for your reply.
Bro that thing burns like a space ship engine
That's crazy love it
Does this thing produce and seperate the oxygen as well? Or do you use a seperate oxygen tank?
It creates hydroxy gas....which is 2 parts hydrogen and 1 part oxygen....perfect for combustion....the generator itself makes hho(another name for hydroxy) but hydrogen and oxygen can be seperated...
know that's bad ass, must be nice to bypass the ripp offs at the Airgas.do you have plans for that generator?
looks like acetylene mix torch
No, it wasn't because there was no yellow flame to be found and the torch only had the one hose connected from the machine.
@@johnmcdougall4149 he was saying the torch looks like one that you use on oxy torches which I believe is where he go the torch
thanks for your efforts l wish you to complete your project and i wish you tell me how it works
Can it run a car?
I've seen them in the Shop.
But they run out of gas shortly. Good for few welds or brasing Cooper.
Not one like this! It produces monstrous volumes of gas
А какая горелка применяется ?
Я вижу там 3 трубки, раньше таких не видел...
now rather then using this as a torch..
hook it up to a fuel rail, see how a fuel injected vehicle will run.
HHO can cut steel plate nice clean cut. this one is good for heating and welding. not for cutting steel plate that's were it cost a lot of money for oxygen. i have yet to see one under $15.000 grand that dose the job
www.hydrogen-severs.com/price/
@@SEVERS72 show me one of you machine cutting 50mm x 1.200 steel sheet cutting it in half
Absolutely fantastic, maybe one day I order it too ;)
太牛逼了,比一般的高出来两个数量级
whats the voltage and amp you use in video
It shows you. Approx 200V and 33 Ampd
Badass build!!!
Is the tip of the nozzle still cool to the touch?
No, this tip cannot be cold, because of the peculiarity of this burner, part of the flame burns inside the burner, under the outer part of the nozzle.
goes the water stay clean in this device? or does it have to be changed from time to time?
In the process, there is water consumption, water must be added. Full water changes are done once a year.
Are you using a separate bottle of oxygen for Cutting?
Metal cutting large thickness requires oxygen. A mixture of hydrogen and oxygen only contributes to the beginning of the process of oxidation of metal during cutting, and then this process should be carried out with pure oxygen.
SEVER -S : Yeah I thought so . After working in machine shops for 33 years ,it really resembles an
OXY -ACETYLENE cutting torch .
Всё о водородном отоплении, грамотно и доступно можно прочесть здесь: hydrogenheating.jimdo.com
How much KWH it takes? Want to know if 1500l/h HHO so how much electricity it would cost. Thanks, waiting for reply
Up to 5 kW
Скажите пожалуйста, углеводород вы заливаете вместе с дистиллированной водой ?
Если нет то куда ?
Что же вы ждёте тоненькую трубочку плохо что не показываете что внутри
Есть цель популяризировать водородное генерирующее оборудование, но нет цели раскрывать тонкости применяемых технологий.
volt ?
amp?
U use flashback arestor with toch flame?
I think he does....because without it would be dangerous
I need that for my scrap business how much and where can i get it Dubai?
Hello! The prices on all our products you can find on our website: www.hydrogen-severs.com/цены/
If I can help you, please contact me +375257400570 or saad7@yandex.ru
Very good. How much
Thank You very much! The cost of this device $ 1500
How much ? Sir .... Form india
All the prices you cam find on our website: www.hydrogen-severs.com/цены/
how much the device costs and where it can be purchased
All our products you can see here, and prices: www.hydrogen-severs.com/цены/
small fortunes worth
Класс😉👍👍👍
Can't believe how many stupid comments you've had ??
Great machine by the way.
Donde compro eso xf
which hydrocarbon you use ?
Any hydrocarbons with a low boiling point.
thanks but which one is better
For example hexane
thanks sir
You are welcome
I'm guessing that you must be using 6000 watts of energy
174v and 33 amp.. = 5742 Watt.. You are right
that's fucking awesome !!!
He is using 5742 Watt at that time
And here 10 kW/h ruclips.net/video/mbNhIFzaiPU/видео.html
Where can I purchase one of these machines, if anyone knows please let me know if you could?
Hello! You can make your choice on our website: www.hydrogen-severs.com/цены/
I know the devices work, but this video presentation seems fake. That much pressure output from just about 21-22 PSI would drop the pressure gauge real fast, but the needle on the gauge is not moving at all. So... yea, it's fake, but it does work, but not like it's being presented. Unless... their is an oxygen tank inside the device that ads the pressurized air flow, & the HHO is softly mixed in to the output line. Now that's a nice machine if it is like that. Otherwise, it's fake. No explanations in the video, so yea. Probably fake, but I know this type of thing actually works, but again, not as it's being presented.
ruclips.net/video/mbNhIFzaiPU/видео.html
One gal gaso= 1200 lph
LA CE PREȚ AJUNGE ?
www.hydrogen-severs.com/price/
ohh common this is a setup,,no way it was able to generate that much hho and at what seems to be constant high psi ,,even the flame color chemistry tells me this is not hho at equal oxy and hydro pressures ,,you got something else coming out that hose ,more like a propane oxy mix,,and how are you able to press the oxy lever to get more oxy pressure and still have hho as preheating flame?? one hose? right
ruclips.net/video/Sx3Jm5eN5HA/видео.html
@@SEVERS72 sorry comrade but i dont understand russian and video still does not address my questions
Good question I've seen systems with two hoses, but hydrogen oxygen mixed together could be incredibly dangerous if it backfired under that extreme pressure....Explosion would be enough to take down the entire building
Сопла подтекают что ли? Видно низкое пламя зеленого цвета или это что-то другое?
это от меди
that gas is mixed that not pure hho
а где вы такую горелку взяли?
Это сварочный резак китайского производства.
That looks nothing like oxyhydrogen it just looks like oxy propane or acetylene
sir how to reduce watt?because it will increase electric bill
Unfortunately, this is not possible, the maximum possible electrolysis efficiency can not physically be above 66.6%. Reducing dependence on energy consumption is possible only when using alternative energy sources, wind turbines, solar power plants, or hydroelectric power stations.
thank you so much for your reply.sir may i used power saving device like ac capacitor to reduced electric bill?
Of course not! The capacitor can help to get rid of reactive energy, but the capacitor is not able to create a condition for saving electricity
If your electric meter is outdated, and if it does not account for reactive energy, then the capacitor will help you to eliminate this shortcoming of stry electricity meters.
Где можно купить такое чудо
How much is it.?
You can see all price here: hho-gas2.jimdo.com
please press button "Product"
whatt price
www.hydrogen-severs.com/price/
como fazer uma maquina dessa
Volt? A?
175v 33A 5.8kW
Awesome!!
Harganya berapa 😊🙏
3000 euro
25 lpm
Yootoo vi say ran v8 on 85 lpm
а сам агрегат самоделка? схему можно?
Да, газогенератор собственного производства. Схему можно, подробности здесь: auto-minsk.maxbb.ru/topic437.html
+SEVER -S круто
Yo quiero uno
:O
how much
hydrogen-carbon-cleaning.jimdofree.com
@@SEVERS72 cool but i cant read russian how much in usd is one of these and can i weld titanium with it
Put in plane
330 amp x 175volts= 57,750 watts
32 amps x 175 volts = 5,6 kW
Me gustaría poder ponerme en contacto con alguien que de verdad tenga algo que produzca hidrogeno, para hacer de aportación a unas calderas, ya que tengo patentado un sistema de intercambiador, que aprovecha el 100% de cualquier combustión, o lo que es lo mismo no se escapa ni un solo grado por la chimenea, quiero que vean esto ruclips.net/video/BU12PR1HbSo/видео.html el prototipo en este caso es de gas-oíl Saludos
saad7@yandex.ru
hola buenas noches , quiero ponerme en comunicación contigo cuanto antes
Me llamo Jose Luis Cordon y mi email calderascordon@gmail.com
Bowlship let's see what in the box oh yeah I'm number one 👎
The box is the same as this box. Inside is a powerful electrolysis gas generator that splits water into hydrogen and oxygen. Watch this video, ruclips.net/video/mbNhIFzaiPU/видео.html here you will see an even more powerful gas generator. This device produces more than 3 m3 of combustible gas. If you want to buy such a device, please contact us: www.hydrogen-severs.com
How much KWH it takes? Want to know if 1500l/h HHO so how much electricity it would cost. Thanks, waiting for reply.
Up to 5000 W per hour
@@SEVERS72 in my country electricity 1kwh costs about 0.17€.
5000w=5kw, so to produce 1500l of HHO costs about 0.85€ (for electricity without expense on electrolyte or other)
Today cars use diesel/petrol/gas. The gas price is about 0.57€ per litre.
The result for this - this is very economic to run car on HHO isnt am i right?
I know thats is a private question, so dont answer if dont want, but if want, then i want to ask - what do you do with this HHO machine? Are you making some money with that or for what purpose do you use that? Thank you.
@@SEVERS72 just now rolled down for more comments and saw answer for my question what are you doing with that machine. Thanks. :)
One more question. Have you ever tried to run an engine with HHO that runs an larger alternator to make HHO, and in result there is enough electricity to make HHO for engine and enough to run other electric machines?
@@robertsalmanis9600 I am looking for ways to use water as a fuel. What results are now, it’s absolutely not important, the main thing is that I’m doing something. Sooner or later I will find this method. But if you sit on the couch and look at the chandelier, in this way you definitely won’t achieve anything and you won’t get anything.
@@SEVERS72 i wish to you only the best!;) you are already great. The numbers you are saying are crazy good 5kwh=1500l of HHO, that is less money and much of energy. Just kindly interesting have you tried that - to run engine that runs alternator to get more electricity.
If approximately car using 20l of gas for 100km, then HHO is cheap way to move. Ok, once again thanks, and wishing the best to you keep moving on;)