What if the anti skating wheel works, but the tone arm doesn't return when you crank up the anti-skating wheel? Seems like there is some drag or something preventing the tone arm from traversing properly.
That is an indication that your horizontal bearing is not working. The Dual manual specifies that the tonearm should move when 0.5 grams of anti-skating is applied. It might be that your bearing is too tight, damaged or dirty.
So my antiskate doesn't work right, both on the old table and on the new one, a Reloop 1000 mk2. I made sure I did all the steps correctly and in the end it only works when the weigh is set to 1 Gr. When it's at 3 Gr for example, and that's what I need for my cartridge , a Concorde Vibe, it just doesn't work, even with the anti-skate wheel in position 7, which is the maximum. I bought this table because the same thing happened to me in the old one. Any suggestion or conclusion? Should I return this one and try a new model from another brand? Should I leave the anti skate to the same value of the weight and let it skate ? Because Concorde Vibe says i need to apply 3 to 5 Gr... Please help :)
Hello Art of Vynil. Is all ok? Sorry if my english is not good. I need a help. I bought this turntable Dual 701. Is necessary maintance. Do you hava a contact? Email, etc. (missing parts)I live in Brazil. Thanks.
Excellent video
"what are you doing with my nail polish?" Too funny...Acting 101 is good enough for RUclips ;)
Nice nail!
What if the anti skating wheel works, but the tone arm doesn't return when you crank up the anti-skating wheel? Seems like there is some drag or something preventing the tone arm from traversing properly.
That is an indication that your horizontal bearing is not working. The Dual manual specifies that the tonearm should move when 0.5 grams of anti-skating is applied. It might be that your bearing is too tight, damaged or dirty.
@@ArtOfVinylTurntableRepairs Thank you for this information. I believe it was dirty, and after a good cleaning everything seems to be working fine.
Hi, do you have any video on Tone arm Wire replacement of 701, please share.
Thank you.
mkashyap no, sorry. I’m not planning on doing one either. Have you tried the service manual?
@@ArtOfVinylTurntableRepairs Thanks for reply, yes but i need a video from expert..
hello . although I replaced the wheel from another dual I have it seems that the antiscating doesnt work. what could be the reason for this?
So my antiskate doesn't work right, both on the old table and on the new one, a Reloop 1000 mk2.
I made sure I did all the steps correctly and in the end it only works when the weigh is set to 1 Gr.
When it's at 3 Gr for example, and that's what I need for my cartridge , a Concorde Vibe, it just doesn't work, even with the anti-skate wheel in position 7, which is the maximum.
I bought this table because the same thing happened to me in the old one.
Any suggestion or conclusion?
Should I return this one and try a new model from another brand?
Should I leave the anti skate to the same value of the weight and let it skate ? Because Concorde Vibe says i need to apply 3 to 5 Gr...
Please help :)
Hi! Where to buy this wheel? In my 1225 the same trouble and tonarm moving to right side when the antisc in the position higher then zero
Hello Val, this wheel can be found in our webshop. The link to this is in the video description.
Hi. Is it posible to buy the stl file for printing myself?
Hello Art of Vynil. Is all ok? Sorry if my english is not good. I need a help. I bought this turntable Dual 701. Is necessary maintance. Do you hava a contact? Email, etc. (missing parts)I live in Brazil. Thanks.