Flash Powder vs Black Powder Firecrackers

V tomto videu som si pre vás pripravil 8 domácich petard, 4 boli z flash powderu a 4 black powderu.
Instagram - / pyro_sokol
Like, Share, Comment, Subscribe
Videá môžu byť vymyslené, a teda nie skutočné, nie som si vedomý žiadnej nezákonnej činnosti, dokumentácia nebude braná ako dôkazový materiál.
Images may be fabricated and therefore not real, I am unaware of any illegal activities, documentation will not be taken as admission of guilt.
#flashpowder #blackpowder #firecrackers #fireworks #test #pyrosokol #dumbum #klasek #flash #gunpowder #homemade
flashpowder blackpowder firecrackers fireworks test pyrosokol dumbum klasek flash gunpowder homemade

[@Michael-rg7mx]

Apples to oranges. Black powder has a maximum pressure of about 14,000 psi. It's about enough to crack cast iron and push it around. 70/30 perchlorate flash powder is about in the middle for speed, but with a very high pressure over 60,000psi. It shatters the cast iron and throws the chunks. C4 will shatter it down to pellets and throw them very fast.
OK, black powder is used for aerial fireworks because it is cheap and works. I wet mix a kilo of rice hulls with 10 kilo of 75/15/10 bp mix right out of the ball mill. Let it dry. Then run through a #2 screen. It makes a light weight burst charge for 3 inch balls. No string, just 2 good layers of gum tape. It makes a good boom.

[@archershillnursery]

Thanks for the numbers. I knew the capabilities of flash powder vs black powder but never saw numbers. I've heard stories of people mistaking flash powder for GP (Please don't ask how, personally I think they look very different) and just about killed themselves by blowing the whole gun to pieces.

[@Pyro_Central]

if you want your black powder too have a louder bang you just need to compact it tighter

[@interdimensionalentity2134]

cheers

[@ToddWright2]

A couple of things.
• There are huge differences among powders due both to composition and particle size
• With black powder it is containment rather than charge density that makes for a more energetic experience.
Many years ago I messed around with BP and created enough energy with 5g to destroy a steel vessel the size of an average microwave oven and fold over the top of a 2"(50mm) steel pipe.
I'm not going to tell anyone how this was accomplished because of the near certainty of severe injury or death should a premature ignition occur, but it can be done.

[@muqri.2745]

Wouldn't that make a rocket?

[@Pyro_Central]

@@muqri.2745 Black powder is used for rockets but in this format since they are firecrackers you want to make sure you have a strong cardboard tube with tight and secure ends with your compacted black powder in it. Personally you don't have to compact it but if you do it works better. For a rocket you would compact your powder then drill out the center to make it a center core burning rocket

[@muqri.2745]

@@Pyro_Central Oh. I have forgotten about the drilling part. Thanks.

[@5gpyro]

Luxusní porovnání 👍 Některé slabší petardy se chovají stejně jak ty s černým prachem - slabá exploze a dutinka zůstane 🙃

[@princenotsocharming128]

This looks like Northern California. The rolling hills are absolutely beautiful.

[@woodyamsterdam]

With professional grade black powder the results will be better but nothing beats flash.

[@spacedusty]

From what I see here, flash powder is more powerfull than black powder, am I right?

[@pyrosokol]

Yes, you are right

[@spacedusty]

@@pyrosokolconclusion from me, flash powder is perfect for pipe bombs or firecrackers.

[@DMNSMN]

Alphabet bois are gonna get you now lol

[@Linus-nq2op]

@@spacedusty No. The characteristic of flash powder is producing large sound pressures without a lot of confinement, because it reacts quickly and very strongly exothermic. But it does produce little gaseous products, which means for the purpose of destruction, it’s ineffective.
Black powder needs to have a lot of back pressure and confinement to react quickly, but it forms more gaseous products, so it’s more effective for moving or breaking material.
Neither of them is useful for making shrapnel from a pipebomb (which I hope you don’t) because the reaction speed is very low, compared to high explosives, bp only deflagrates. It will produce a blast wave, but it only rips the metal open instead of shattering it.
Don’t make pipebombs

[@stanisawkawak8442]

Yeah... I had same problem. The 2 ends kept blowing out so I started to cover them with lots of short pieces of electrical tape and it worked. Some people say that black powder should be granulated and not compacted (I’m one of them and use loose granulated powder in my firecrackers) and some say that it needs to be compacted. I’m going to experiment and compare it soon.

[@TheFireGoose]

How did the experiment turn out? Because I have had very little luck so far with black powder firecrackers.

[@gigapiwosz7792]

i jak wyszło

[@burntheprideflag2024]

@@TheFireGoose ive tested flash and black and flash obv burns a lot quicker i dont compact flash and it is really loud

[@alexanderrossbach3694]

serious question: why do you even experiment with black powder firecrackers? you can legally obtain firecrackers with up to 10g(category P1) of flash powder in poland. i`m already happy that we are finally allowed to import them as a private person in germany without a license.

[@Exotic69420]

@@alexanderrossbach3694 Bro its not legal in Germany lmao

[@jaromurin663]

Ahoj, môžem sa opýtať kde si zhonal flash powder ?

[@alpyrotechnics760]

brother needs to compact his black powder lol

[@Louis-xm4tu]

that makes it burn slower lool

[@THE_AMATHER_PYRO]

Těším se

[@marcox999-y7m]

Mustafa abi onelan

[@danielszerszen762]

Jak Ty je zrobiłeś ? Z czego zatyczki góra i dół? How did you make them What are the top and bottom plugs of?

[@pyrosokol]

They are from hot glue gun

[@danielszerszen762]

@@pyrosokol Top and bottom?

[@pyrosokol]

Yes

[@danielszerszen762]

@@pyrosokolI have to try to do something similar 10g photoflash did a job good job: D

[@twezzy_pyro]

How to do flash powder i need to know that

[@maximus_2663]

Černý prach se díky svému pomalejšímu hoření používá například pro výmety kolových pum z tubusu.

[@patrikhucko2498]

Teším sa

[@bugatvofficial374]

Thanks for information
I lIKED 👍👍👍

[@popugai67]

Myslím si, že ak by si telo púzdry s čierním práškom zabalil do zvisle niťami, ktoré sa dobre nerozťahujú, napríklad jutové lano, potom by bol výbuch silnejší, pretože tlak bude sa zvýšať
ješte ak black powder bol granulovaný, tak výbuch bude slabší, to znamená že ak lepší ho brúsiť a zabaliť ho čo najtesnejšie (až aby bol tlak z vnútra), tak výbuch by bol viacero silnejší

[@A.G.798]

Man hat den Eindruck das die mit Schwarzpulver gefüllten Behälter überhaupt nicht Verdichtet wurden, da bei den ersten sogar die Paphülze stehen geblieben ist, und die Verpuffung nur nach oben abging! Hingegen die mit Blitzpulver gleich von Anfang an mit lautem Knall explodierten! Welche Sprache wurde da gesprochen ? Hört sich irgendwie Osteuropäisch an,aber welche genau könnte ich nicht sagen ?

[@fondors_feuerwerks_welt]

Tschehisch

[@pakan357]

@@fondors_feuerwerks_welt Slovak

[@JEtoTAKpreco]

Flash 💪🏻

[@patykwwh9308]

Trzeba zrobić dużo fotobłysku, bo era mocnych petard i emiterów się zakończyła :/

[@engy6592]

Prawda.

[@DemencjaNieIstnieje]

robiłeś już to kiedys ?

[@Ratel777]

Woooohoho skvělý test 👌 🤩💪💪Zdravíme z Polska☺️✋👊

[@MBSGAMES_]

What's the stuff sealing the crackers?

[@pyrosokol]

I think it was hot glue

[@longla4827]

Bạn đã sử dụng keo gì để bịt đầu vậy.

[@Making_Nonsense]

he used a glue gun

[@ouepillthegoat]

is your flash powder kclo4/al or a different one? thank you

[@pyrosokol]

Kno3 based

[@ouepillthegoat]

@@pyrosokol another question, did you use german dark aluminium or just pure aluminium? thanks!

[@pyrosokol]

@@ouepillthegoat pyro dark aluminium

[@stevenkrolly9267]

Kno3 / MG ?

[@stevenkrolly9267]

Hast du Video mit NAPS

[@LordGrom_]

Опыт интересный но мне понравились поля и горы на фоне. Где это ?

[@popugai67]

Скорее всего Словакия

[@wlesie6067]

Ahoj. Čierny prach na tieto petardy ste si vyrobili sami alebo ste si kúpili Vesuvit?

[@pyrosokol]

Vesuvit

[@stanislavolah7789]

Black powder sa da vyrobiť jeho zložky su dostupné ale flash Power je ťažké zohnať hlavne chlorečnan draselny teda po novom chloristan😜😜😜😜

[@Petrix420]

Flash Powder sa vyrába len z hliníkového prášku a chlorečnanu draselneho ale ten sa da s kusok chémie ľahko vyrobiť

[@tobias450]

@@Petrix420fp sa vyraba z velmi vela latok nie len chlorecnany a taktiez nie len hlinik...

[@Petrix420]

@@tobias450 viem že môžu byť aj iné recepty napr. dusičnan draselný a hliník praškový ale tamto je jeden z najpouživanších receptov

[@squigglesmcjr199]

​@GloockingAroundelectrolysis

[@Wujo.apizz36]

więc jeżeli robisz pierwszy raz firecrackery to lepiej z czarnego prochu bo bezpieczniej, poza tym flashpowder dosyć drogi w wykonaniu jest

[@pyromaniakhk3258]

Good video.

[@ricklong3260]

The black powder blee yhe ends out...look at the smoke ...it should be circular...not a COLUMN of smoke 😮

[@dhooter]

Your flash powder was weak. Probably had a moisture issue or you didnt have your 70-30 correct. Add some sulfer as it gives a very noticeable kick to the explosion and less smoke

[@pepajede4635]

Natočiš prosím návod na výrobu tich petard z flashe?Já je vždycky vyrobím dám tam toho hodně a buď to vyhoří nebo malá rána

[@pyrosokol]

Uvidím, ale možno hej

[@pepajede4635]

@@pyrosokol ok mega díky už se taky pomalu chystám na silvestra

[@JEtoTAKpreco]

Flash nemá preco vyhoriet, mne buchol aj nechtiac keď bol vysypaný (fail 🤣)

[@pepajede4635]

@@JEtoTAKpreco když má trochu přívod vzduchu může ale furt to hodně tesnim tak nevím

[@s13xplosion]

Activa los subtítulos en español gracias 👍🏽

[@tommyinge81]

What language, Italian?

[@pyrosokol]

Slovak

[@SkylerOne]

Nice vid, and channel 👍👍

[@wiktorszymczak4760]

Its surprising how much i understand

[@pyrosokol]

Zajebisce :)

[@stanisawkawak8442]

Czeski ma wiele wspólnego z polskim

[@wiktorszymczak4760]

@@stanisawkawak8442 jak ostatnio bylismy w czechach to nie pomoglo

[@stanisawkawak8442]

@@wiktorszymczak4760mają podobieństwa ale to wciąż 2 różne języki 😄

[@kkocicak_cz]

Ahoj z čeho jsi udělal ten flash powder ?

[@pyrosokol]

Tento konkrétny bol vybraný z petard

[@kkocicak_cz]

@@pyrosokol Aha dobře

[@kubicastefaniga3837]

To us začína sezóna petard yes

[@pyrosokol]

Ja mám sezónu celý rok :D

[@kubicastefaniga3837]

😂🤣

[@pepajede4635]

@@pyrosokol asi tak já taky občas něco zapálil nějaké dýmovnice a petardy na pole

[@OBS.Rey__]

U didint make the fire works with a good enough seal

[@sirveve0]

Tesim sa

[@tntomega]

your bp not milld enough try ballmill its make magic

[@Linus-nq2op]

It’s just that blackpowder needs a lot of confinement.

[@maci1245]

You need to attempt this again but leave 50% of air in the tube

[@dhooter]

Yep. What he said

[@Damnation_Kulture]

What language is that for some reason I can legit understand you 😮

[@pyrosokol]

Slovak

[@Pyromannetje2]

0:48

[@KhangToolOfficial]

I can even make a firecracker with 0.5g of black power explode
You're doing it the wrong way

[@SpencerGaming7580]

That was a ridicolous comparison, you need to Seal the bp properly, Not with hot glue dude

[@tahaleon0713]

that dlashpowder wasnt good mix 50%magnalium powder and 50%sulfur it will go boom real good

[@pyrosokol]

You might go real boom too

[@Linus-nq2op]

KNO3 flash powder is more effective.

[@mieciotorpeda3229]

Hi where I buy Kclo3? Or KCLo4

[@pyrosokol]

I have no clue

[@Linus-nq2op]

You better do not

[@mieciotorpeda3229]

Ta jasne xD jeden nie ma pojęcia i bierze to z powietrza wytrąca, a drugi mi odradza 🤣

[@archershillnursery]

Do you live in the US? fireworks cookbook website is great. I can't recommend you using any chemicals without great research and caution however. A body without impairments is priceless!

[@Visvangmeneer]

Wrap the bp firecrackers with rope or tape or both😂

[@pyrosokol]

maybe I will try

[@Visvangmeneer]

@@pyrosokol use hot glue for the endcaps. Then tape then rope

[@Visvangmeneer]

Or just use airfloat aluminiumpowder instead of charcoal same ratios
5 parts kno3 3parts aluminium
2 parts sulfur
Be careful tho its friction sensitive when fine enough.

[@dzejkej1337]

Vsetci sa tesime ale najviac sa tesi Allah

[@tacosalad5825]

You should speak in English so everyone can listen.

[@pyrosokol]

I know, but thats not that easy :D

[@lovethewicked1367]

He's says enough.

[@Max_Chooch]

What an assinine comment. How about you learn a new language ding dong? Funny how you want to make your inadequacy someone else's problem. It's not. It's yours.