I love mine. I started it in 2015 when model space made it available. Now I did buy after market parts to make it better. Also, did some alterations to make more to my liking. I’m not a modeler and some of these things were a challenge. All I can say is enjoy the build. Regardless of the issues that some people had. I had minimal issues with my build. My excitement was through the roof with this model.
I've not heard of this Fanhome kit, but it looks like a straight repro of the Deagostini model, right down to the magazines (with slightly different covers) and blister card packaging for the parts. I finished building my Deagostini Falcon last year after building it off-and-on over the course of a handful of years. I kept mine vanilla outside of some custom blast damage with Tamiya modeling putty and a Dremel (as the sculpted blast damage was rather plain), and of course I painted the entire thing instead of leaving the factory paint job. I agree with you regarding accuracy - I noticed a lot of people nitpicking the Deagostini kit because it wasn't accurate to the sets, when in reality it was never marketed as such. It was only ever advertised as being accurate to the film model. One aspect of the Deagostini model that contributes to its rarity is that it was plagued with supply and distribution issues that delayed chapter boxes for months on-end for some people. There were times when I wouldn't get a monthly box for a while, and then months later I would get 4-5 boxes all at once. I've also read posts online from some later adopters of the model who were left in limbo without the remainder of their kits because Deagostini stopped production of the model so abruptly. That all said, enjoy your build! Once it's all completed this Falcon is an absolute unit; it's deceptive just how large, complex, and heavy it's going to be in the end.
I built the DeAgostini Millennium Falcon model about 8 years and which looks to be the same as this and was collected weekly/monthly. It was absolutely worth every penny. A fantastic build from the metal frame and motorised boarding ramp to the cabin and engine lights, with removable panels to show off the interior.
@YourGeekFix it was on table for a few years but given its size (about 24×33 inches) i now have it wall mounted on what's basically a tv arm bracket that I found on eBay
I build this kit years ago and pretty much have the entire build on my channel. It's a great kit, but there are a few issues that it has as well. Overall though, it's a very solid kit, and it's as close as you'll get to the studio model. And unless they've changed the cockpit framing area, you'll need to get one 3D printed if you want it to be screen accurate.
I am super excited about this model! This is what turned me on to DeAgostini in the first place! I was so bummed when I found out that I wasn’t able to build this! So Fanhome came along and I am almost finished with my R2D2 project. Exceptional quality and craftsmanship! This is my next build. I am on issue 70 with R2 so I hope this is still available for me when I finish!!!
Just finished fanhome ecto1 build and starting on Millenium falcon. 2 things to note though. you can only hold subscription for no more than 2 months. After that your subscription may be cancelled. Oh yea and I have tons of mini screws left over from mine. They usually provide 2-3 extras but be prepared to have a wide variety of screws left over. Looking forward to starting my falcon. Great video!
Wow, that's a magnificent kit. Congrats on finally getting one! The only thing it's missing is a tiny figure of Peter Griffin holding onto a used sofa 😂
Just to clarify De Agostini did NOT get access to the LFL archives to photograph the original model to create theirs. Steve Dymzso (former owner of Master Replicas) was the consultant for De Agostini and they used HIS personal MR Falcon replica as the basis for their kit. Any photos used were taken by Dymzso when he was researching and light scanning the model in the early 2000s when MR were planning on releasing their replica.
Well, this is where some of us collectors and modelers have found buyee I finally purchased the whole subscription set number 1 to 100 for under $450 but here’s where the issue is the shipping the shipping. Price was steep to have this deliver from Japan but I finally got it and I don’t have to wait a whole year to build it and the crazy crazy price tag that comes with it Modelers buyee the place. I already have the knight rider and the DeLorean BTF2 both have gotten under a crazy price
The price of this is insane. it costs 1,639$ to complete this model. that' just totally nutzo. I'd love it for 300-400$ but 1640$ WTF.. with the state of the world who can afford this?
Compatible to other metal models that huge in size. This thing uses up part of the room. The plastic toy I held up is over 600. There are small models that are around the price you are talking that are pretty great.
Keep in mind, the legacy Falcon that is 3/4 the size and solid plastic, no interior, details, or moving parts, is between $375 to $600. The tiny Bandai 1/144 Millennium Falcon, is around $360. The Rebels Millennium Falcon goes for around $500 these days, which is just a big plastic shell. The one I showed in this video made by Hasbro goes for $700 complete. The landing gear, which I would still like to get, go for around $100. The smaller and poorly detailed Code 3 version is going around a $1000. The Hasbro 2.5' New Millennium Falcon is $1,124.49. For the tooling and production costs alone, it makes sense. You can buy only what you want at a time and pause the build. It's better than any payment method. And you are getting something enormous. If you aren't interested in buying or building it, you can watch others do it. No worries.
Good to see this model is still around, sadly, delivery is still only restricted to the UK and the US because it's based on local subscription. I was made aware by some who managed to get one internationally (the DeAgostini version) that they had to buy it through a third party supplier who only offered the model as a complete set of issues in a single packaged box. This was years ago when the series set was towards the end of it's run. They also mentioned the cost of shipping was hefty because of the total package weight. Customs also had fun ripping through the issues that included wiring and electronics too. Still looks like a complex but fun model, enjoy your build.
My daughter is 8 months. I originally was going to build the Lego Millennium Falcon. But I decided I would go with this. I am going to wait on putting it together. I figured by the time she turns 3 I would help her build it. I am also going to order the R2D2 build starting next year.
Great walkthrough! I have the DeAgo Falcon from several years ago and these are the best mass-produced studio scale replicas you can get now without paying $10K on a Master Replicas Falcon. Is the Fanhome/DeAgo Falcon perfect? Not 100% but there are tons of 3rd party modelers that you can get 3D printed accessories or electronics to make it even more accurate. This is definitely not an Ertl/MPC/Bandai model, it’s a studio scale replica and will be a showpiece for anyone who devotes their time to it! Keep the videos coming, it gives me inspiration to finish mine!
Omg....I'm so excited, I just ordered this build using your promotional code, which I thank you so much. I have to admit that it is a bit pricey, but making monthly payments it won't hurt as much. But overall, I think it's well worth it, being it's 32 inches long being made of metal and plastic. Hope you continue with your videos on this build cause you do such a great job explaining it step by step. Thanks again, Augie
The 1/72 Bandai Perfect Grade Millennium Flacon was created from 3D laser scans of the 6 foot filming model from the first Star Wars movie, A New Hope, courtesy of Lucasfilm. Of course, this model is only 19" in length, but it is modelled exactly from the filming model. And it is priced roughly around $450.00. The Deagostini version was also 3D scanned from the Lucasfilm's filming model used in the Empire Strikes Back movie. I believe it was from the 32" filming model. This FANHOME version looks absolutely amazing. Unfortunately, the price is to rich for my wallet.
Actually the Deagonstini was basically a kit version replica of the Master Replica model. That Master Replica version was based off a 3D scan from the Empire Strikes Back Version. Those Master Replica versions are worth a lot on the secondary market. Especially with a Harrison Ford signature. The paint isn’t the best though. I have two MR pieces myself but not this.
HI. I have the Hasbro -legacy millennium falcon. which i converted by using the DeAgostin falcon parts.replaced the cockpit and tunnel.rebuilt the inside using the parts,radar dish no.72..lowered the bottom by about 1 inch.its alot easy .and still have the sounds..theship is about the same size..
Congratulations on get ur build started. I see cost is a huge issue for a lot of folks. But considering if i were to go to hong kong and purchase a high quality of this level there completed already it is about the same. I have my eye on a few primes in HK and the details and materials used is pretty good. But to wait 2 years to complete is a bit much. I would rather take 4-5 payments and larger amounts of stages sent at one time then wait 2years for the falcon. Optimus i can get in HK for 2/3 the cost already built.
Towards the end of the run with Model Space they had the option to just outright purchase all the issues at one time. That is how I got my R2-D2. Personally I would rather have that option as well with Fanhome. Even if 4 or 5 installments..
This is a brilliant model and when i built this with De'agostini when it first came out i was like a kid again and plus all these years later i still cant stop looking at it lol 😂 i love this model and i painted mine just like the real filming model from the ESB 👍
@@YourGeekFix thanks for your reply and do you have any plans on painting yours when completed as I may have some helpful tips that will help massively as painting it will help to give It more realism??
Cant wait to watch this series. Interested because I cancelled my subscription and now, years later, I have the space to build and display! Thanks for the video….which randomly popped in my feed. Well met!
Mine partially built. 2 drawers full of parts and a semi built model looming atop the drawers. Finish it one day. Yeah cost $2000 back when it was current in Australia. It's huge though.
In the closeup of the “greeblies,” you can see the pair of leaf springs from a car. Lots of kit bashing was done when constructing the studio model. Neat to see they kept true to it. Looks like you will receive a small diecast Millenium Falcon on a stand, not a stand for the studio scale model, as the 4th gift.
I live in Ireland, i would absolutely love to be able to have the Millennium Falcon and the Enterprise D, along with other ships and items and even though there is a UK site for FanHome, i doubt i would ever be able to get them because coming from the UK, they would charge me custom charges on every single issue and it would run out ridiculously expensive.
@@YourGeekFix Yes, pretty much, as i have bought collectors items from other sites and they came from the UK and each time, i got stung with custom charges and they weren't cheap either. They truly ruin things for people with their greed. Looking at that blueprint, wow the Falcon is huge lol, i wouldnt actually have any room for it in my current home, but, i will for sure enjoy seeing you build it, along with the Enterprise D :).
I Bought the model when it was 1st released, its still sitting untouched in 2 containers in my shed!!! I didn't have the space to build it as it arrived each month and have it sitting around, so i was waiting until i got it all, and have just not gotten around to putting it together... I bought a mount so i could attach it to a wall, or the roof also! i also wanted to get a heap of the mods that were released, but couldn't at the time.. i could now though if they're still available???
Maybe I missed it, but do they ship overseas? I'm in Australia, I had my opportunity to build the first version back in 2016 but didn't go with it as Hatchett Partworks was the supplier and they didn't have the best reputation for regular supply or customer service Currently working on the AMT cutaway model which is quite large (nowhere near this size though) and it may have to serve as the next best thing
Had no idea this existed until today, wow. Just so happens I sold my Smuggler's Run BMF two months ago, my nit-pickyness got to me. This thing looks amazing and I'm seriously tempted...
Well, that was fast. I was finishing up the Enterprise D build and was going to move on the Falcon, but apparently, it's too late. They are no longer accepting orders on the either the Falcon, or the R2 kits.
I’ve noticed the first shipment is usually for some of the most iconic pieces of the model, but you have to put those away because from the next issue on you on an area of the model you can build up on and you don’t attach the first stages until at least your at the halfway mark
Yes it starts with the cockpit parts then moves onto the metal frame and then the plating, finishing with the mandibles and side plating, if i remember correctly
I might have to suck it up after the holidays and find something on Fanhome to start doing. Problem is there are so many to choose from and I can only afford one at a time. This and Ecto-1 are the ones I like the most though.....
A lot of posts commenting on the cost, I couldn't find it anywhere on their site. It has a, honestly, kind of bait-and-switch approach of selling you the first two builds (seen in this video) for basically free ($2), but then no mention of how many more are needed to complete. I can't help myself: I find their lack of information disturbing. As I remember it, the DeAgostini model had a "lump sum payment" option (was just over $2000), but I didn't see that here. I missed out on the DeAgostini model and am SUPER interested in this one, but ... I don't know why they're being so sketchy about the pricing. If it's $100 or $10,000 just put it up there.
The pricing really fluctuates by a lot. Last week it was 30% less total. May have another sale near Christmas and you can google Fanhome coupon code and watch for a good one like I did on another model. Price is based on when you buy, what country you are in, and the delivery method. Some countries have the lump sum and some have told me the site says "coming soon" in the US, but I don't personally know. Best thing to do is call the one near you.
Thank you for the reply. Maybe they're doing a version of dynamic pricing? Which, as a BUSINESS, I understand but in practice is shady af. You have a product, sell it and be open about the price. Pricing and shipping by COUNTRY is another obvious detail but, every other company in existence seems able to navigate this problem. I'll keep my eye on it, but I wish they would understand this doesn't come across as "small indie company doing our best", it just feels like "SUPER MEGA ULTRA SCAM!" Is +that+ what they want?? @@YourGeekFix
I just purchased this Falcon through your link, and I can't wait to start building. I was wondering if there are figures for this model to also purchase?
It's a good kit not great when I got it from Deagostini. I'm nearly finished with my model but I also upgraded the electronics and added a lot of addons that I purchased separately as well, which added additional costs which does not include all the paints and other model equipment. The electronics that come with the Deagostini/Fanhome kit is pretty poor. I was hoping Fanhome would purchase the STK Millennium falcon which is the same kit as the Deagostini/Fanhome but with upgraded electronics and interior detailing. THAT IS A MUCH BETTER KIT OVERALL. Unfortunately it is only sold in Asia and does not ship to the United States and Europe. If you want a way better kit get the STK version. You can also buy it fully assembled and painted too. That's a great option!
I can appreciate the detailed work of this model. But I think the one thing that turns me off from this is the length of time to go through the entire subscription to receive all pieces to complete the build. Granted, the build itself will take a considerable amount of time. But my goodness, this could last a couple years or more. So crazy, yet I love the ship itself. Thanks for sharing.
It's actually not worth the cost. Due to issues with the build, i had to glue my ramp closed. The engine lights strip peeled away from the supports, had to glue that back down again, it peeled away again. Model lights stopped working within months of completion. My ship now sits in 2 halves in my room. Will put it back together as a static unlit model.
I just watched the video and love it , I did notice that the big round black sticker isn't put on properly with wobles and air between the sticker and the background
I think I must have missed the stage when you ask if it is worth it - doing the maths (Math) here in the UK we are looking at over £1066.00 just for parts this does not take into account that you pay 7.99 for binders (only Binder 1 is free) also add another £700+ if you go Premium. so that's approx rounding down just short of £2000 / $2457.51 , it will take about 2 years (24 Months) to get all the parts is it worth it - Ummmm Not for me. like watching the video and will follow your build - thanks
Having completed 2 of the DeAgostini model kits, I can say you're wrong on a couple minor key notes. 1 the piece you referenced sits on the top side above the ramp. 2 don't build the cockpit out of the box. Get the paragraphix kit. It's detail is second to none.
Well, there you go. I have a full DeAg subscription waiting for me to get around to building it. Do you know if any changes have been made and incorporated into the Fanhome "edition"?
@@YourGeekFix I purchased the full release in the UK direct from Deag when first release. On completion the greeblie errors were resolved by a new sprue being sent out containing all the correct ones to replace any wrong previously sent out. The sprue was only sent on completion of the subscription!
My complete DeAgostini kit with lots of aftermarket upgrade parts from Paragraphics and Falcon 3D is still packed in 3 large storage bins waiting for me to get the urge to build it!
@@YourGeekFix Falcon and Paragraphics have the best upgrades out there. I may skip the interior build altogether and just build a super detailed exterior, cockpit and gunports with full lighting.
@@YourGeekFix Same here, but the Falcon is a lot like the Lost In Space Jupiter 2; the insides don't quite jive with the outsides. The Falcon is supposed to be a freighter but has no cargo hold, and if the engines are as big as the exterior suggests, there would just barely be room for a bunk and a toilet! But' hey, we're not supposed to notice that stuff.
Hey. This is Steve D. Actually, your origin info isn't quite right. DeAgostini had contacted me because they knew I had been working at MR and had been in the archive many times over 9 years, so they asked if I had information on the Falcon model. At MR, we had completed a full digital scan and took about 500 photos back around 2003 to make our replica. I supplied this information to DeAgostini to create their subsequent model kit. They went on to hire me as a consultant for the project and I produced a series of painting videos for them shortly after that. There you go....
I'm in ireland.bought this weekly over 2 years .cost 1100 euro at the time. Have it in my spare bedroom under a sheet to keep the dust off it.cool looking model but 2 years is too long a build time.
@@YourGeekFix My first box was $2.07 for stages one and two. The next box was stages three through six, and cost $52.12. Box three was $96.12, and I was told the other 18 more boxes will be $96.12, shipped over the next 18 months. That comes out to 1880.47 for the 21 boxes over the nearly two years it takes to get it all. They also said the prices could change from week to week due to production costs.
For a year or two of hobby entertainment it’s pretty cheap. Spending $1k on a hoppy per year is normal, assuming you’re in the right demographic to want it bad enough
I thought about doing their Enterprise D model, but the total cost was going to be about $1600 for a model that was worth maybe $500-600. Total rip off.
The Enterprise D is a complete piece of garbage. I got 50 stages and $720 into it only to find it's incredibly overengineered, the wiring is the most overdone mess you've ever seen and there's light leaks all over the thing. Also it ends up costing more than $2,000!
It was Hasbros 2.5 foot millennium falcon. No longer available, and very expensive. I spent years getting all the parts for it. Just the landing gear is $100.
100 stages. The bags have different numbers of parts. For example, I got one stage that has a lot of the interior in the bag. The price is different in every country and based on when you buy it and the coupon code you use. I recommend calling your local Fanhome and checking the site to see your options.
@jeremimiller4438 I am doing videos for the rest of the millennium falcon and the other car. Fanhome did not continue the DeLorean or the enterprise D due to the lower views the first box got.
Just got my first 2 packs in the UK - parts look like they were from the origianl release in 2014 given the dates on the back and condition of the cardboard etc - they look old!!
@@YourGeekFix On the speakers in my notebook, your voice is way louder than the music. When i listen to the same part of the video on my headphones, your voice gets down to the same level as the music.
@seelenschlucht on devices that technically have mono conversion we have problems. Last year I has people that could not hear my voice at all because it was stripped out by youtube.
They tell me to include it, but when I asked, it only tracks where people are coming from. I did find discount codes by typing fanhome discount codes October 2023 into Google.
@@YourGeekFix That's cool. I'm fine with letting them know you referred me to their site. I was just curious if your code offered a bonus or discount. Thanks for the tip on the Google search for codes.
Hi, a fantastic video mate, i haven't watched all of this video but if this is one of the mags that one buys monthly or fortnightly, i will NEVER EVER, EVER, EVER, EVER, EVER buy or recommend ANYTHING like this ever again! from my experience they are a total rip-off and you don't get all the parts needed to complete the product!! well i dident and at the end it just went in the bin and for me, it was a total waste of time and money to collect all the parts! im 51 now and ive bought a couple over the years but now, i will NEVER EVER recommend things like this to anyone! the last one i bought took me about a year and a half to get all the mags (i dident miss one issue!) and got all the parts put it all together but then realised i had to buy all the electronics, the transmitter and receiver separately I was BADLY DISSAPOINTED IN IT! All that time money and effort for nothing! so i WILL NEVER BUY ANYTHING LIKE THIS AGAIN! anyway sorry for my rant and my 2 cents! take care mate and have a great day!
@ArnaldRimmer first off, I love Red Dwarf! Wish there was a good model of that ship and not just space bug. So, did you buy this model? So far I finished the R2 and Iron Man. Love them. I was able to get the fast track on this model and will be doing a one day build soon. Sorry to hear about your experience. Hope you find other things on our channel you like. And hope to have you as a member of our geeky community. I've gotta do something red dwarf.
@@YourGeekFix Thank you for replying nice one! well i dident get that for 2 reasons, 1, i already had a big ish model of the millennium falcon, the ERTL one (i think they made the kit of it, back in about 86 to 1990 ish, i carnt remember when exactly it came out and i bought it, it was decades ago! Showing my age now LOL), and 2, with all that crap i went through with that weekly, fortnightly mag thing I was on about, i just dident bother buying it and I will never buy them again, but that don't mean to say I dident want it! LOL! Now, if i haven't got the money for anything, ill aether make my own version blue peter style or just save up the money and buy it. but I will never buy these weekly/fortnightly mags again! I was just soo disappointed with that one, it put me off them for life! Oh PS, I carnt wait for your one to be made? Have you got the vid made about it yet or are you going to make one, because I think I remember you mentioned it in this video some where? Anyway mate, you take care and have a fantastic day!
@ArnaldRimmer we have had so much happening and the videos of every box burnt me out, so this one I am building with 8 boxes at a time. Might get to it thisweek.
Check out the finish product and the size. It is pretty amazing. Until they started making them again, those that resold theirs did so for a few thousand or more.
Haha looks cool, unfortunately you did not solve your own question yet... :( Is that kit more like 10 Build Phases or like 30 or 50? For me it seems like if you get 7 Build phases, it costs you already 72,46€ .... 10 = 111,43; 20 = 241,33€ (Basically 129,90€ per 10 Packages if the Price stays the same. Edit: It looks like the old edition had 100 build phases!!! So it may take >1273,33€ and about 7.5 Years??? Wow!
@@jameslamb4573 The total cost of the Fanhome Millennium Falcon model is $1,639. The model is made up of 100 assembly stages. The first stage costs $1.95, and the second and third stages are free. Each subsequent stage costs $13.99. There are 21 packages in total, and each package contains five stages. Packages 7 through 20 cost $95.7 each, and the last package costs $76.56. Shipping costs $12 per package.
I remember lusting after this in 2014 and now that I've finally have gotten it I have become a giddy child that can't stop grinning.
Ha ha! Awesome!
You wanted to have sex with a spaceship model?
I love mine. I started it in 2015 when model space made it available. Now I did buy after market parts to make it better. Also, did some alterations to make more to my liking. I’m not a modeler and some of these things were a challenge. All I can say is enjoy the build. Regardless of the issues that some people had. I had minimal issues with my build. My excitement was through the roof with this model.
Mods wise, which did you use? I was looking at Mike's mods.
I've not heard of this Fanhome kit, but it looks like a straight repro of the Deagostini model, right down to the magazines (with slightly different covers) and blister card packaging for the parts.
I finished building my Deagostini Falcon last year after building it off-and-on over the course of a handful of years.
I kept mine vanilla outside of some custom blast damage with Tamiya modeling putty and a Dremel (as the sculpted blast damage was rather plain), and of course I painted the entire thing instead of leaving the factory paint job.
I agree with you regarding accuracy - I noticed a lot of people nitpicking the Deagostini kit because it wasn't accurate to the sets, when in reality it was never marketed as such. It was only ever advertised as being accurate to the film model.
One aspect of the Deagostini model that contributes to its rarity is that it was plagued with supply and distribution issues that delayed chapter boxes for months on-end for some people. There were times when I wouldn't get a monthly box for a while, and then months later I would get 4-5 boxes all at once.
I've also read posts online from some later adopters of the model who were left in limbo without the remainder of their kits because Deagostini stopped production of the model so abruptly.
That all said, enjoy your build!
Once it's all completed this Falcon is an absolute unit; it's deceptive just how large, complex, and heavy it's going to be in the end.
Great comment! Thanks. There are so many things that can be done and I have to decide.
I built the DeAgostini Millennium Falcon model about 8 years and which looks to be the same as this and was collected weekly/monthly. It was absolutely worth every penny. A fantastic build from the metal frame and motorised boarding ramp to the cabin and engine lights, with removable panels to show off the interior.
Awesome! Where did you display it?
@YourGeekFix it was on table for a few years but given its size (about 24×33 inches) i now have it wall mounted on what's basically a tv arm bracket that I found on eBay
@Cthulhu469 I saw a lot of people do it that way. I need to start thinking about that.
@YourGeekFix and with removable landing gear and plates to cover the bays its worth doing. Looks so much better "in flight"
@Cthulhu469 I'll check it out. I have mods also plan to get
I build this kit years ago and pretty much have the entire build on my channel. It's a great kit, but there are a few issues that it has as well. Overall though, it's a very solid kit, and it's as close as you'll get to the studio model. And unless they've changed the cockpit framing area, you'll need to get one 3D printed if you want it to be screen accurate.
I am planning on modding it.
@@YourGeekFix Awesome! I did some mods on mine also. Enjoy the build!
I am super excited about this model! This is what turned me on to DeAgostini in the first place! I was so bummed when I found out that I wasn’t able to build this! So Fanhome came along and I am almost finished with my R2D2 project. Exceptional quality and craftsmanship! This is my next build. I am on issue 70 with R2 so I hope this is still available for me when I finish!!!
Awesome!
Just finished fanhome ecto1 build and starting on Millenium falcon. 2 things to note though. you can only hold subscription for no more than 2 months. After that your subscription may be cancelled. Oh yea and I have tons of mini screws left over from mine. They usually provide 2-3 extras but be prepared to have a wide variety of screws left over. Looking forward to starting my falcon. Great video!
@@vizionct1 good to know
I have the Deagostini falcon. It took one hundred steps to complete and weighs in at about 25 pounds when finished.
25lbs! That is hard core. Did you do any mods?
101 steps with the missing parts added later...
@@aaronm1855 oh?
Wow, that's a magnificent kit. Congrats on finally getting one! The only thing it's missing is a tiny figure of Peter Griffin holding onto a used sofa 😂
LOL!
I so hope someone makes one 🤣
@@NordicDan right!
Just to clarify De Agostini did NOT get access to the LFL archives to photograph the original model to create theirs. Steve Dymzso (former owner of Master Replicas) was the consultant for De Agostini and they used HIS personal MR Falcon replica as the basis for their kit. Any photos used were taken by Dymzso when he was researching and light scanning the model in the early 2000s when MR were planning on releasing their replica.
Ok thanks
Well, this is where some of us collectors and modelers have found buyee I finally purchased the whole subscription set number 1 to 100 for under $450 but here’s where the issue is the shipping the shipping. Price was steep to have this deliver from Japan but I finally got it and I don’t have to wait a whole year to build it and the crazy crazy price tag that comes with it Modelers buyee the place. I already have the knight rider and the DeLorean BTF2 both have gotten under a crazy price
Thanks
The price of this is insane. it costs 1,639$ to complete this model. that' just totally nutzo. I'd love it for 300-400$ but 1640$ WTF.. with the state of the world who can afford this?
Compatible to other metal models that huge in size. This thing uses up part of the room. The plastic toy I held up is over 600. There are small models that are around the price you are talking that are pretty great.
Or you could buy a Warhammer 40k titan for +$2500.
Or a used car.
Keep in mind, the legacy Falcon that is 3/4 the size and solid plastic, no interior, details, or moving parts, is between $375 to $600. The tiny Bandai 1/144 Millennium Falcon, is around $360. The Rebels Millennium Falcon goes for around $500 these days, which is just a big plastic shell. The one I showed in this video made by Hasbro goes for $700 complete. The landing gear, which I would still like to get, go for around $100. The smaller and poorly detailed Code 3 version is going around a $1000. The Hasbro 2.5' New Millennium Falcon is $1,124.49. For the tooling and production costs alone, it makes sense. You can buy only what you want at a time and pause the build. It's better than any payment method. And you are getting something enormous. If you aren't interested in buying or building it, you can watch others do it. No worries.
@@YourGeekFixI love how people get mad on how you spend your money keep doing what you love
@@MaskedVengeanceTV$2500 for a a "used car" 😂 you may want to reconsider your options with finances, that's a down payment
Good to see this model is still around, sadly, delivery is still only restricted to the UK and the US because it's based on local subscription.
I was made aware by some who managed to get one internationally (the DeAgostini version) that they had to buy it through a third party supplier who only offered the model as a complete set of issues in a single packaged box. This was years ago when the series set was towards the end of it's run.
They also mentioned the cost of shipping was hefty because of the total package weight. Customs also had fun ripping through the issues that included wiring and electronics too.
Still looks like a complex but fun model, enjoy your build.
I know it is currently in the Netherlands, Germany, Poland and other countries in Europe.
My daughter is 8 months. I originally was going to build the Lego Millennium Falcon. But I decided I would go with this. I am going to wait on putting it together. I figured by the time she turns 3 I would help her build it. I am also going to order the R2D2 build starting next year.
Cool. There are a lot of small parts though.
Great walkthrough! I have the DeAgo Falcon from several years ago and these are the best mass-produced studio scale replicas you can get now without paying $10K on a Master Replicas Falcon. Is the Fanhome/DeAgo Falcon perfect? Not 100% but there are tons of 3rd party modelers that you can get 3D printed accessories or electronics to make it even more accurate. This is definitely not an Ertl/MPC/Bandai model, it’s a studio scale replica and will be a showpiece for anyone who devotes their time to it! Keep the videos coming, it gives me inspiration to finish mine!
I like Mike's mods for adding working detail.
Omg....I'm so excited, I just ordered this build using your promotional code, which I thank you so much. I have to admit that it is a bit pricey, but making monthly payments it won't hurt as much. But overall, I think it's well worth it, being it's 32 inches long being made of metal and plastic. Hope you continue with your videos on this build cause you do such a great job explaining it step by step. Thanks again, Augie
Just be aware it uses a lot of property. I hope you have a special place to display it.
What kind of discount is the promo code?
@@billbonnie6676 not a discount... tracking code.
@@billbonnie6676 in Google type coupon code. Many are 20 to 30 percent.
The 1/72 Bandai Perfect Grade Millennium Flacon was created from 3D laser scans of the 6 foot filming model from the first Star Wars movie, A New Hope, courtesy of Lucasfilm. Of course, this model is only 19" in length, but it is modelled exactly from the filming model. And it is priced roughly around $450.00. The Deagostini version was also 3D scanned from the Lucasfilm's filming model used in the Empire Strikes Back movie. I believe it was from the 32" filming model. This FANHOME version looks absolutely amazing. Unfortunately, the price is to rich for my wallet.
Correct
Actually the Deagonstini was basically a kit version replica of the Master Replica model. That Master Replica version was based off a 3D scan from the Empire Strikes Back Version. Those Master Replica versions are worth a lot on the secondary market. Especially with a Harrison Ford signature. The paint isn’t the best though. I have two MR pieces myself but not this.
@mrorangepeel659 the master replicas version was from the 6 foot model. This was scanned from the smaller 32 inch model.
@@YourGeekFix this is NOT correct. The Master Replicas version IS the Empire version.
@@deannorman9585 Sorry, deep five revealed master replicas used photos of the large model for reference.
HI. I have the Hasbro -legacy millennium falcon. which i converted by using the DeAgostin falcon parts.replaced the cockpit and tunnel.rebuilt the inside using the parts,radar dish no.72..lowered the bottom by about 1 inch.its alot easy .and still have the sounds..theship is about the same size..
@@stephenbamblett4270 interesting
Congratulations on get ur build started. I see cost is a huge issue for a lot of folks. But considering if i were to go to hong kong and purchase a high quality of this level there completed already it is about the same. I have my eye on a few primes in HK and the details and materials used is pretty good. But to wait 2 years to complete is a bit much. I would rather take 4-5 payments and larger amounts of stages sent at one time then wait 2years for the falcon. Optimus i can get in HK for 2/3 the cost already built.
Cool
Towards the end of the run with Model Space they had the option to just outright purchase all the issues at one time. That is how I got my R2-D2. Personally I would rather have that option as well with Fanhome. Even if 4 or 5 installments..
@@TotlKaos yeah
This is a brilliant model and when i built this with De'agostini when it first came out i was like a kid again and plus all these years later i still cant stop looking at it lol 😂 i love this model and i painted mine just like the real filming model from the ESB 👍
Awesome!
@@YourGeekFix thanks for your reply and do you have any plans on painting yours when completed as I may have some helpful tips that will help massively as painting it will help to give It more realism??
Cant wait to watch this series. Interested because I cancelled my subscription and now, years later, I have the space to build and display! Thanks for the video….which randomly popped in my feed. Well met!
Awesome! Thanks for joining us!
Mine partially built. 2 drawers full of parts and a semi built model looming atop the drawers. Finish it one day. Yeah cost $2000 back when it was current in Australia. It's huge though.
Awesome! Where and how will you display it?
In the closeup of the “greeblies,” you can see the pair of leaf springs from a car. Lots of kit bashing was done when constructing the studio model. Neat to see they kept true to it.
Looks like you will receive a small diecast Millenium Falcon on a stand, not a stand for the studio scale model, as the 4th gift.
Thanks. I umderstand.
I live in Ireland, i would absolutely love to be able to have the Millennium Falcon and the Enterprise D, along with other ships and items and even though there is a UK site for FanHome, i doubt i would ever be able to get them because coming from the UK, they would charge me custom charges on every single issue and it would run out ridiculously expensive.
That's too bad. Is that standard?
@@YourGeekFix Yes, pretty much, as i have bought collectors items from other sites and they came from the UK and each time, i got stung with custom charges and they weren't cheap either. They truly ruin things for people with their greed. Looking at that blueprint, wow the Falcon is huge lol, i wouldnt actually have any room for it in my current home, but, i will for sure enjoy seeing you build it, along with the Enterprise D :).
@Eric19877 one of out team on the channel is in the Netherlands. When I send something, he has to pay customs as well.
Just got my first kit two weeks ago! Do you plan on making any modifications yourself or keeping it stock?
This and back to the future mods I have purchased.
I Bought the model when it was 1st released, its still sitting untouched in 2 containers in my shed!!! I didn't have the space to build it as it arrived each month and have it sitting around, so i was waiting until i got it all, and have just not gotten around to putting it together... I bought a mount so i could attach it to a wall, or the roof also! i also wanted to get a heap of the mods that were released, but couldn't at the time.. i could now though if they're still available???
There are more mod options now than ever and I am getting two of them. Particularly for the cockpit. I would love to see the mount you got.
I Have it, and can say with all seriousness: HELL YEAH!!!
@@jingles009 very cool!
Maybe I missed it, but do they ship overseas?
I'm in Australia, I had my opportunity to build the first version back in 2016 but didn't go with it as Hatchett Partworks was the supplier and they didn't have the best reputation for regular supply or customer service
Currently working on the AMT cutaway model which is quite large (nowhere near this size though) and it may have to serve as the next best thing
One of our viewers from there said its not yet available, unfortunately.
I like that cutaway.
Had no idea this existed until today, wow. Just so happens I sold my Smuggler's Run BMF two months ago, my nit-pickyness got to me. This thing looks amazing and I'm seriously tempted...
Cool!
All Han Solo needs is a little luck - and the Ultimate Hot Rod. 😎 Promo code still works! Just used it and got both starter sets for - 5¢?! 😮🤣
@@Adarkane325xi ok
Well, that was fast. I was finishing up the Enterprise D build and was going to move on the Falcon, but apparently, it's too late. They are no longer accepting orders on the either the Falcon, or the R2 kits.
I’ve noticed the first shipment is usually for some of the most iconic pieces of the model, but you have to put those away because from the next issue on you on an area of the model you can build up on and you don’t attach the first stages until at least your at the halfway mark
Next stages are related to the cockpit as well.
Yes it starts with the cockpit parts then moves onto the metal frame and then the plating, finishing with the mandibles and side plating, if i remember correctly
@@WeerdWulf awesome!
I might have to suck it up after the holidays and find something on Fanhome to start doing. Problem is there are so many to choose from and I can only afford one at a time. This and Ecto-1 are the ones I like the most though.....
I also want the ecto one.
I'm about 4 months away from finishing the BTTF DeLorean (which was picked up by Fanhome anfter Eaglemoss went bust), but I reckon this will be next.
I just started the delorean
A lot of posts commenting on the cost, I couldn't find it anywhere on their site. It has a, honestly, kind of bait-and-switch approach of selling you the first two builds (seen in this video) for basically free ($2), but then no mention of how many more are needed to complete. I can't help myself: I find their lack of information disturbing.
As I remember it, the DeAgostini model had a "lump sum payment" option (was just over $2000), but I didn't see that here.
I missed out on the DeAgostini model and am SUPER interested in this one, but ... I don't know why they're being so sketchy about the pricing. If it's $100 or $10,000 just put it up there.
The pricing really fluctuates by a lot. Last week it was 30% less total. May have another sale near Christmas and you can google Fanhome coupon code and watch for a good one like I did on another model. Price is based on when you buy, what country you are in, and the delivery method. Some countries have the lump sum and some have told me the site says "coming soon" in the US, but I don't personally know. Best thing to do is call the one near you.
Thank you for the reply. Maybe they're doing a version of dynamic pricing? Which, as a BUSINESS, I understand but in practice is shady af. You have a product, sell it and be open about the price. Pricing and shipping by COUNTRY is another obvious detail but, every other company in existence seems able to navigate this problem.
I'll keep my eye on it, but I wish they would understand this doesn't come across as "small indie company doing our best", it just feels like "SUPER MEGA ULTRA SCAM!" Is +that+ what they want?? @@YourGeekFix
Wow cool to see this video, mine is still all sealed in bags I haven’t had the space for it yet, but it’s something I’m definitely looking forward to.
Awesome!
I just purchased this Falcon through your link, and I can't wait to start building. I was wondering if there are figures for this model to also purchase?
Awesome. I have three boxes to open already. We will also be doing mods. Let me know how it's going.
It's a good kit not great when I got it from Deagostini. I'm nearly finished with my model but I also upgraded the electronics and added a lot of addons that I purchased separately as well, which added additional costs which does not include all the paints and other model equipment.
The electronics that come with the Deagostini/Fanhome kit is pretty poor.
I was hoping Fanhome would purchase the STK Millennium falcon which is the same kit as the Deagostini/Fanhome but with upgraded electronics and interior detailing. THAT IS A MUCH BETTER KIT OVERALL. Unfortunately it is only sold in Asia and does not ship to the United States and Europe. If you want a way better kit get the STK version. You can also buy it fully assembled and painted too. That's a great option!
Interesting
I can appreciate the detailed work of this model. But I think the one thing that turns me off from this is the length of time to go through the entire subscription to receive all pieces to complete the build. Granted, the build itself will take a considerable amount of time. But my goodness, this could last a couple years or more. So crazy, yet I love the ship itself. Thanks for sharing.
There is a lot of work and modding involved as well.
Exciting!!! Can't wait for this series
Awesome! Thanks for watching.
You just popped up in my feed so I sub.
Enjoyed this FALCON introduction.
Thanks! Glad to have you as a member of our community!
I also have the Deagostini falcon haven't finished it because of OCD, try to get it as scale as possible. 8yrs in the making
I bet it will be awesome!
There used to be pictures of the build on a forum for it a long time ago.
Bummer@@caxj0088
It's actually not worth the cost. Due to issues with the build, i had to glue my ramp closed. The engine lights strip peeled away from the supports, had to glue that back down again, it peeled away again. Model lights stopped working within months of completion. My ship now sits in 2 halves in my room. Will put it back together as a static unlit model.
Sorry to hear that.
I can't believe it costs over $1800 bucks. Is that how much models cost today?
@@spuriouseffect If you don't use the tips I've been writing, maybe so.
@@YourGeekFix Even if your tips could save 25 percent, that's still 1400 bucks for a model. Crazy. Anyway, have fun.
@@spuriouseffect thanks
Another thing, the upper turret window placement is incorrect. Remove it and align it properly by changing the orientation
Tell me more. If subscribed, or watching my series, feel free to provide guidance.
Wow. That turret cover is big. That kit is huge.
As big as my hand, yet a small part of the ship
I just watched the video and love it , I did notice that the big round black sticker isn't put on properly with wobles and air between the sticker and the background
Thanks CAvdWiel2011, I appreciate it! Thanks for joining our community.
Hope this stays released for at least another year as I’ve gotta finish the delorian and knight rider to clear my budget
Ah, OK.
I think I must have missed the stage when you ask if it is worth it - doing the maths (Math) here in the UK we are looking at over £1066.00 just for parts this does not take into account that you pay 7.99 for binders (only Binder 1 is free) also add another £700+ if you go Premium. so that's approx rounding down just short of £2000 / $2457.51 , it will take about 2 years (24 Months) to get all the parts is it worth it - Ummmm Not for me. like watching the video and will follow your build - thanks
Thanks. I have done two other fanhome builds to completion and answered the initial question. Hard to fully answer til the end.
I tried the promo code and it works but it doesn't appear to do anything at checkout. Did they tell you what it was for?
Yeah, after the video. That is a tracking code. If you are looking for a coupon, search Google for fanhome coupon October or November 2023.
I started the deAgostini model and had to stop... now I won't get any pack 😢 Is Fanhome better and will support the Falcon longer?
I think so.
I too have been wanting to get this. Your video got me excited again. I just subscribed and used the discount code. Thanks
Cool! Will you be modding it?
Let's hope they addressed all the issues and crappy manufacturing that plagued the DeAgostini version.
Yeah, it's a different build, as mentioned.
I built a model space kit...was VERY fun!
Very cool!
How much was the total cost to build this and how long did it take to get all the parts??
I am still getting the parts. November this was hugely discounted and you can look up discount codes. Prices vary greatly.
Having completed 2 of the DeAgostini model kits, I can say you're wrong on a couple minor key notes.
1 the piece you referenced sits on the top side above the ramp.
2 don't build the cockpit out of the box. Get the paragraphix kit. It's detail is second to none.
I purchased a couple of mods. That is one of them. Also pricy.
Well, there you go. I have a full DeAg subscription waiting for me to get around to building it. Do you know if any changes have been made and incorporated into the Fanhome "edition"?
The changes in Greeblies were made after the first release.
@@YourGeekFix Thanks, I will be paying considerable attention to the updated/upgraded greeblies as they arrive.
@@YourGeekFix Atually the amended greblies were sent out on completion of the Deag release to all those that completed the subscription, I got a set!
@@historex54tamiya you were part of the first group?
@@YourGeekFix I purchased the full release in the UK direct from Deag when first release. On completion the greeblie errors were resolved by a new sprue being sent out containing all the correct ones to replace any wrong previously sent out. The sprue was only sent on completion of the subscription!
My complete DeAgostini kit with lots of aftermarket upgrade parts from Paragraphics and Falcon 3D is still packed in 3 large storage bins waiting for me to get the urge to build it!
I want to upgrade, but have to decide which way.
@@YourGeekFix Falcon and Paragraphics have the best upgrades out there. I may skip the interior build altogether and just build a super detailed exterior, cockpit and gunports with full lighting.
@hobo1452 the interior is what first interested me.
@@YourGeekFix Same here, but the Falcon is a lot like the Lost In Space Jupiter 2; the insides don't quite jive with the outsides. The Falcon is supposed to be a freighter but has no cargo hold, and if the engines are as big as the exterior suggests, there would just barely be room for a bunk and a toilet! But' hey, we're not supposed to notice that stuff.
@@hobo1452 Very true. Funny you mention the Jupiter 2. I have that as well.
Hey. This is Steve D.
Actually, your origin info isn't quite right.
DeAgostini had contacted me because they knew I had been working at MR and had been in the archive many times over 9 years, so they asked if I had information on the Falcon model.
At MR, we had completed a full digital scan and took about 500 photos back around 2003 to make our replica.
I supplied this information to DeAgostini to create their subsequent model kit. They went on to hire me as a consultant for the project and I produced a series of painting videos for them shortly after that.
There you go....
Why would you make a youtube account just to comment? We have talked before. Email me. Happy to talk.
Wow Freaking AWESOME... I just discovered your channel...Instant Sub!!!
Wow! Thanks!
I’m now sucked in…… too!!! Been waiting for this as well
Awesome!
Is this the exact same deagostini model, or is it different? Any idea how long it would take for all the parts for the build to come in?
Exact same. 25 months. Although, in two months I already have 4 boxes.
@@YourGeekFix awesome, just subscribed. I also just subscribed to the build as well. Can't wait.
@@daveymeadows8602 cool!
Where did you buy your silicone mat? I could really use one like that!
TEMU
Holey moley how big would the figures be 1/32 scale or 1/24 scale?
1:43. But huge. This is why people qre much smaller than they appear to the falcon
Great job. Hi from Argentina. You are a good boy.😂💪🏻👍🏻
Thanks! I appreciate that!
1100£… No way! Never mind how accurate and big it is. That's way beyond I would spend for a model.
Understood. I don't know what the exchange would be. I'll have to trust you there. But you can build by proxy watching us do it.
Can the 3 3/4 inch hasbro figures fit in it?
They can in the other I held up.
thank you !!! im getting it
Cool!
I'm in ireland.bought this weekly over 2 years .cost 1100 euro at the time. Have it in my spare bedroom under a sheet to keep the dust off it.cool looking model but 2 years is too long a build time.
Still, I'd like to see what you do with it.
Not worth it. What they don't tell you is, it is over $1800.00 by the end of it, and the price can go up without them telling you.
$1300 for the last one I purchased.
@@YourGeekFix My first box was $2.07 for stages one and two. The next box was stages three through six, and cost $52.12. Box three was $96.12, and I was told the other 18 more boxes will be $96.12, shipped over the next 18 months. That comes out to 1880.47 for the 21 boxes over the nearly two years it takes to get it all. They also said the prices could change from week to week due to production costs.
@@Griffonknight21 are you in the US?
Yes I am.
@@YourGeekFix
is it worth it..........1600 dollars.........uh probably not. lol, still a fun kit.
Thanks for watching watching Craigdvance! Hope you also subscribed! Would love to have you as a member of our community.
For a year or two of hobby entertainment it’s pretty cheap. Spending $1k on a hoppy per year is normal, assuming you’re in the right demographic to want it bad enough
Any idea what the final cost is for this model
Depends on where you live and when you purchase. Best thing to do is call them.
1639$ in total
@@justinsciacca3524 Depends on when you start and where you live
I really want the robocop. But I have a fear of commitment lol
Understood
how long does it take for the whole kit comes in????
25 months
I thought about doing their Enterprise D model, but the total cost was going to be about $1600 for a model that was worth maybe $500-600. Total rip off.
I'm doing that one now.
The Enterprise D is a complete piece of garbage. I got 50 stages and $720 into it only to find it's incredibly overengineered, the wiring is the most overdone mess you've ever seen and there's light leaks all over the thing. Also it ends up costing more than $2,000!
@@outsider238 Tell me more.
@@YourGeekFixI tried putting a link to my video about how I quit building it but I think RUclips removed it.
@outsider238 yeah, they no longer allow links even to our own stuff.
What is the Falcon he is holding in the video at 1:08 ?
It was Hasbros 2.5 foot millennium falcon. No longer available, and very expensive. I spent years getting all the parts for it. Just the landing gear is $100.
How many parts to buy & the cost in total 🤔
100 stages. The bags have different numbers of parts. For example, I got one stage that has a lot of the interior in the bag. The price is different in every country and based on when you buy it and the coupon code you use. I recommend calling your local Fanhome and checking the site to see your options.
108 stages actually. but hey, with that current "12% discount" package, it only comes to a total of $1,630.30 delivered..
these sets are beautiful, but the problem with the show is that the missing parts are sometimes hard to find and the price is 😿
If there are missing parts I call and they send them no charge within a few days.
Second comment after watching your whole video. This is going to be a huge model. Amazing.
Thanks! If you haven't already, be sure to join our community by subscribing.
Why did you stop doing these fanhome videos other that the Iron Man and R2? Was really looking forward to the DeLorean and the Enterprise D.
@jeremimiller4438 I am doing videos for the rest of the millennium falcon and the other car. Fanhome did not continue the DeLorean or the enterprise D due to the lower views the first box got.
WHAT SCALE is this model???
1/43
Just got my first 2 packs in the UK - parts look like they were from the origianl release in 2014 given the dates on the back and condition of the cardboard etc - they look old!!
I like that factor.
We are getting it here in Hungary next mont i think.
Oh, wow! That's good to know. A lot of people comment it is not available.
THAT IS SO COOL
Thanks. You are cool!
Will you put it under a table with a glas top? The music around minute 22 got very annoying and too loud.
Good idea. Not sure where to put everything. So big! I can't affect the music. If you listen on computer, does it sound the same?
@@YourGeekFix On the speakers in my notebook, your voice is way louder than the music. When i listen to the same part of the video on my headphones, your voice gets down to the same level as the music.
@seelenschlucht on devices that technically have mono conversion we have problems. Last year I has people that could not hear my voice at all because it was stripped out by youtube.
@@YourGeekFix Having problems to play propper sound in the 21st century but want to fly to the moon. Humans.. 🤣
@@seelenschlucht yup
Man that is annoying not getting the hole thing
You can in the right locations.
The fourth gift is a little die cast version on a stand, not a stand for the actual model
That's cool!
For the metal screws. Use oil.
I saw that. World of Wayne recommended that as well.
The dork is strong with this one.
Thanks
What does the promo code give us?
They tell me to include it, but when I asked, it only tracks where people are coming from. I did find discount codes by typing fanhome discount codes October 2023 into Google.
@@YourGeekFix That's cool. I'm fine with letting them know you referred me to their site. I was just curious if your code offered a bonus or discount. Thanks for the tip on the Google search for codes.
Probably would have been cheaper to buy a 3D printer and make your own
I already did that. This is an exact replica in metal. Love the interior. Also, huge in size!
Or collect lego pieces and design a lego version.
Hi, a fantastic video mate, i haven't watched all of this video but if this is one of the mags that one buys monthly or fortnightly, i will NEVER EVER, EVER, EVER, EVER, EVER buy or recommend ANYTHING like this ever again! from my experience they are a total rip-off and you don't get all the parts needed to complete the product!! well i dident and at the end it just went in the bin and for me, it was a total waste of time and money to collect all the parts! im 51 now and ive bought a couple over the years but now, i will NEVER EVER recommend things like this to anyone! the last one i bought took me about a year and a half to get all the mags (i dident miss one issue!) and got all the parts put it all together but then realised i had to buy all the electronics, the transmitter and receiver separately I was BADLY DISSAPOINTED IN IT! All that time money and effort for nothing! so i WILL NEVER BUY ANYTHING LIKE THIS AGAIN! anyway sorry for my rant and my 2 cents! take care mate and have a great day!
@ArnaldRimmer first off, I love Red Dwarf! Wish there was a good model of that ship and not just space bug. So, did you buy this model? So far I finished the R2 and Iron Man. Love them. I was able to get the fast track on this model and will be doing a one day build soon. Sorry to hear about your experience. Hope you find other things on our channel you like. And hope to have you as a member of our geeky community. I've gotta do something red dwarf.
@@YourGeekFix Thank you for replying nice one! well i dident get that for 2 reasons, 1, i already had a big ish model of the millennium falcon, the ERTL one (i think they made the kit of it, back in about 86 to 1990 ish, i carnt remember when exactly it came out and i bought it, it was decades ago! Showing my age now LOL), and 2, with all that crap i went through with that weekly, fortnightly mag thing I was on about, i just dident bother buying it and I will never buy them again, but that don't mean to say I dident want it! LOL! Now, if i haven't got the money for anything, ill aether make my own version blue peter style or just save up the money and buy it. but I will never buy these weekly/fortnightly mags again! I was just soo disappointed with that one, it put me off them for life! Oh PS, I carnt wait for your one to be made? Have you got the vid made about it yet or are you going to make one, because I think I remember you mentioned it in this video some where? Anyway mate, you take care and have a fantastic day!
@@YourGeekFix oh and PS, your the second person who new the connection! LOL, take care
@ArnaldRimmer we have had so much happening and the videos of every box burnt me out, so this one I am building with 8 boxes at a time. Might get to it thisweek.
@ArnaldRimmer one of my favorite shows.
love this kit, but wow, the total price is a bit high
Check out the finish product and the size. It is pretty amazing. Until they started making them again, those that resold theirs did so for a few thousand or more.
For the size and detail, I would say that this is value for money and you get the satisfaction that you built it yourself
@@RicStorm616 I agree
Where is the rest of the build?
@@ArtofLenNickel i plan to assemble 6 boxes this weekend.
Is it worth it? Yes, if you like it!
@@patrickbrun5830 I agree
Yes. I have one. Repainting it now. Didn't do the ramp or the interior.
Those are the best parts!
is the fanhome et worth it
I would like to know. I don't have that one.
Haha looks cool, unfortunately you did not solve your own question yet... :( Is that kit more like 10 Build Phases or like 30 or 50? For me it seems like if you get 7 Build phases, it costs you already 72,46€ .... 10 = 111,43; 20 = 241,33€ (Basically 129,90€ per 10 Packages if the Price stays the same.
Edit: It looks like the old edition had 100 build phases!!! So it may take >1273,33€ and about 7.5 Years??? Wow!
If we get 5 build components per month we're looking at a little under 2 years.
@@jameslamb4573 Thank you yes i seen that only later... still a large timeframe and a bit expensive in my taste :-/
It takes two years,just like the other fanhome models we have done. You get four phases in each box.
@@jameslamb4573 The total cost of the Fanhome Millennium Falcon model is $1,639.
The model is made up of 100 assembly stages. The first stage costs $1.95, and the second and third stages are free.
Each subsequent stage costs $13.99.
There are 21 packages in total, and each package contains five stages.
Packages 7 through 20 cost $95.7 each, and the last package costs $76.56.
Shipping costs $12 per package.
OK I checked out the website and it looks great. I could get into this if I wasn't homeless and in a wheelchair. Oh well.
Understood.
Pity it’s only available in the USA
It was first available in the UK and Germany. Which country?
@@YourGeekFix Australia
@willfraser3741 yeah, you ate right there.
So cool
I agree