Flysky Th9X Upgraded Version Unboxing & Quick Look with FS RM003 V2 2.4ghz Module + FSiA10B receiver
HTML-код
- Опубликовано: 13 окт 2024
- #FlyskyTH9X #TH9X #FSRM003
A quick unboxing and brief look at the Flysky Th9X 2.4ghz Upgraded Radio Transmitter with the FS RM003 V2 Module.
The FS TH9X is now available with AFHDS 2A and that allows it to be used with most recent flysky receivers like the FSiA10B and many more.
Plus the FS RM003 Module now supports failsafe option to secure you model in case of signal loss which was missing in the previous version of 9X model.
The TH9X can be flashed to Open tx firmware and unlocked more features it has to offer.
So is the Flysky th9x still worth in 2021?
Well if budget is your concern than this is probably your best option to get a decent multi function radio system or to get a decent radio to use with open tx.
Thanks for watching and Subscribe to my channel!
i am building a F-35b 1/6th size and i am about to buy this transmitter module, thanks for helping me out here and yes i actually came here looking for fail safe method.
Thanks for watching! Failsafe information wasn't available everywhere so i made sure to add that in this video
Great video. I was looking for a detailed review of this radio. Is it possible to use a tbs crossfire module on this?
Yes you can. You'll have to use the jr adapter to mount the crossfire. Thanks 👍
@@RakishRc Awesome vids Rakish. Is it possible to get Crossfire working on an 10 yr old FS-TH9X (Gen 1?) Although I opened up my radio and I saw the 6th pin had the solder point not the 8th pin, that means it is Gen 2??) Can you explain any other special steps to a newb? I have to flash OpenTX 2.1 onto it first, and then I just buy the JR module and receiver and it's plug and play? Or any other configuration/setup?
@@brandoncoomes9794 hi, unfortunately express lrs or crossfire cannot be used with th9x due to hardware limitations. But you could use crossfire in ppm mode. If the solder point is on 6th pin then the radio motherboard is revised version. Flash open tx or er9x whichever you like and test it out 👍 with er9x there plenty of protocol option with multiprotocol as well that's missing in open tx.
Potentiometer gimbals?
hi bro nice video but can you pls help how to setup 3 mode flight switch in flysk fs th-9x i want to use it in my drone pls reply and help bhai
Which configurator are you using for your drone? Assign the same 3 position switch in aux channel for flight modes you want to use
@@RakishRc i dont know what do you mean by the term configurator but i am using apm2.8 and for programing mission plannner software . i want to use channel 5 as the aux channel but i am nort able to do it
Can I ask how much range the transmitter and receiver?
The module has a specified range of more than 800 meters from flysky and the fsia10b receiver has a specified range of 500-1500 meters in air. I haven't tested the range yet. But my guess is it should do 600-700 meters easily in the air and about 300-400 meters on ground.
Interesting, my TH9X does not have the 'Output' option in the menu where you change i-bus/s-bus.
It's only available with the new version that supports afhds2a protocol. But you can update the firmware for that too with turning afhds2a firmware and eeprom file on the old version.
@@RakishRc Thanks man, that explains it. My plan is to upgrade to OpenTX or ER9X, althought didnt decide which one - just googling for pros and cons. What would you suggest if i may ask?
@@marcinsvr I like the er9x but it lacks auto swtich detection in settings. Also I have trouble maintning bind between module and receiver with er9x for some reason. With Open tx binding is flawless. Open tx is more than sufficient and a good choice in my opinion.
WHAT IS RANGE BRO....??
hi, i have a problem with this module, how bind multi receiver, cause it forget the previous receiver every time when i bind new one? thankyou.
That is a problem with this module even though it's an updated version. Flysky did not fix that issue.
Hi, if you're still interested in the solution stay tuned. I've found a way to keep all receivers in memory and not have to bind again 👍
Can you put the upgrade firmware on the old model ? Thanks in advance an link to upgrade
Upgrade to Er9x or opentx...much better
Hi
I would like to talk
Cool video