2014 Dodge Charger R/T Serpentine Belt, Tensioner, and Pulley Replacement
HTML-код
- Опубликовано: 5 окт 2024
- Hope this video helps you replace the serpentine belt, tensioner, and pulley on your #hemi Dodge charger. Pro tip just take the hose off the intake.
How to replace serpentine belt on 2014 hemi charger.
#gates
#mopar #diy #musclecar #moparornocar #dailydriver
Great video Rick and Ricky.
Very professional job.
I never thought about the tensioner being bad.
Make sense.
I would hate to think what this job would cost at the Dealership or a Repair shop.
You guys make a great team.
Thanks for sharing.
Take care, Ed.
Thanks for watching Ed! I’m sure it wouldn’t be cheap haha
It’s easy when you got some help. Thanks Ricky
Thankyou for the diagram that is by far better then anything I could find on google when I was replacing the belt on my 2010 300c 5.7
Glad we could help! Took some digging to find that haha
Sweet!!
Thank you! -2014 Charger, replacing all of these
No problem! Glad we could help!
@@jerayracing just have a question- I found the tensioner and idler pulley, but what is the other pulley that you are replacing?
The ribbed pulley was called the idler
The smooth one was called the tensioner pulley per Rock Auto. I had my local parts guy look it all up and supply them. 15k later and it’s holding up well.
Thank you :) 14 Charger is an incredibly reliable car if you take care of it!@@trackandtravelwithrick8933
Thank you
What part is number 3 on the diagram??
Air conditioning compressor is #3 Thanks for watching
What part is number 1 on the diagram ?
#1 is an idler pulley, if it spins free and is not gritty you can leave it. I replaced mine but I think it was ok. My problem was the tensioner was weak
@@jerayracingthanks man , the one i have are very noisy and not stable
My problem is when i hard accelerate i start smelling a burning rubber smell i recently changed my alternator but would the problem be fixed by replacing this?
After doing this, the burnt rubber smell did go away. It was most likely more the tensioner going bad than the pulleys.
For sure it was the tensioner. Wasted money on the pulleys they were fine but new tensioner spring was much stiffer
Thanks for watching
@@jerayracing thanks for the quick response im going to change the tensioner and see if my problem goes away
No problem! Hope it fixes it!