@@WawanWan-ux5mg bukan kebakar..itu sengaja seluruh body di klotokin catnya, trus di siram air garam sebody..stepnya persis anak² mobil yg doyan rusty. Itu mobil kalo emang abandoned lama di tempat terbuka kondisinya ga akan seperti itu, pasti lebih parah..apalagi dengan kaca terbuka dan beberapa part masih banyak yang nempel/utuh... Smua itu demi konten hahaa
This IS what you(ANYONE) CAN and WILL DO WHEN they EXPLOIT their FULL potential, 🤣🤦♂️🤣...imagine, and they can, 🤣🤦♂️🤣; but let's just say "imagine" if people REALLY took care of themselves, mentally, physically, and emotionally, 🤣🤦♂️🤣....they'd become "gods", 🤣🤦♂️🤣.....like you see here....NO needs for the "tools" YOU ARE your own "tool"!!!!....people ONLY see themselves as people, that's why they remain as such, NOT knowing their TRUE selves, and THEREFORE EXPAND their TRUE POTENTIAL!!!🤣🤦♂️🤣...thank God, source, the universe, whatever you want to call it, 🤣🤦♂️🤣...I AM One of them(like the "kid" you see here) 🤣🤦♂️🤣....cheers, 😁✌.
If the youth in the USA had 1/10th of this young man's motivation, dedication and energy it would be amazing. My hat off to you young man, a job well done. Congrats on your accomplishment
Well, it's not really a job well done. It's just some guy posting nonsense videos to get people to send money. Everything he did was wrong. He pulled the head off the engine and put it back on with the old gasket, didn't use a torque wrench anywhere. The engine will not even run properly or last any time. All he did was damage. All this crap is just a con. Just like the pigs who injure and abuse animals while pretending to "save" them.
Hey Gary, the youth in the USA are to smart to start a massive project like this...we know the tolerances and actual engineering behind a car like this. don't blame us for being lazy, we just know what projects to avoid.
I absolutely can't believe how this video can have so many positive comments. This is no restoration...it's just destruction. Does no one here has at least any sense of how a restoration should look like? First..the car was prepared to look like this. I mean how is it even possible that those plastic bumpers on this facelift E30 could have any rust? By the lines on the door you can even see that there was some acid on the car to make it rust faster. Then you can see how he just puts filler on those rusty doors. This will last for about a year before the filler will crack up again. Repairing the engine like this is a complete mess. he dissasembles the engine and didn't take any note which of the bearing shells, pistons, etc. belong to which cylinder. This wouldn't be bad if all the parts would have been completely restored. But he just smashed the old pieces in again in any order. There are many little differences in radius etc. over time for each cylinder. After rebuilding the engine like this i'm pretty sure it won't last longer than a few kilometres/miles before the engine will blow up. At least..all sealing surfaces has been painted and all the correct seals are missing. This thing will leak oil, exhausts and every other possible liquid like hell. Sorry, but this video is a bad joke. Please realize that.
I think they initially not going to ride this car or use it somehow, they just cleaning and painting autoparts for RUclips content. Just like many many videos about restoring "abandoned and rusted" toy car models of 2020/2021 Lamborghini or Rolce Royce.
Hats off buddy..... Impressive. I've seen people doing such projects in big garage with whole team and lots of equipment but this guy is one man army . Really appreciate him.
Not many people would even start a project from car in such a bad condition like this, but you guys are awesome you doing this with very limited equipment and I believe it's not easy to get new parts, but wow so much enthusiasm! Good luck
"not many"... actually no sane person would ever try to restore something this far gone... you literally need EVERYTHING new for this one so it makes no sense to even start.
I just watched this!! Must have been posted twice. BMW (not 50 years old), Series 3 turns into Series 7. - its a miracle. New wheels, etc. Wish we had seen the inside. All in all this guy is awesome at taking things apart and putting them back together, he doesn't look old enough to drive!!
Adding this to my dream restoration project list! The transformation is jaw-dropping. Can't wait to see more of these incredible builds on your channel.
Agreed. I saw a lot of parts cleaning and reassembly. I’m not sure if any parts on it are new. I have a lot of doubt as to if the engine will even run, especially given it sat without an air cleaner.
@@alisa2316 No, it's complete nonsense. It's not even a BMW engine. It's all fun because people are actually buying it. The car wasn't restored They pulled a few bits off and polished / painted them. It's completely meaningless.
Would love to see how the engine ran after mixing up all the pistons and bottom end caps? New bearings with a sandpaper crank? Very interesting would love to know how long it lasted.
None of this is a restoration , took the engine apart cleaned it and threw it back together. Took an easy panel to repaint and did a very quick repaint over rust. And noticed for months later they never made another video, same with all the bikes
No words.... All these comments about good restoration and more but.... Its just all about taking it apart cleaning and putting togeather with no care, wheres the restoration part? Re-using old head gasket and bolts and torque specs? Lmao don't repeat after him... 100% Car wont even start...
Yes, It's just made up youtube stuff, I'm car mechanic and I'm very sure as well it won't start. He just rust spray painted it for the video, cars don't age like this and look at the rusty plastic bumpers...
Everyone has to learn somewhere he is young and he is working with very basic tools, somebody should have told him you need a piston ring compressor🤷♂️ as for the gaskets bm's leak oil from the factory anyways so it will be like most bmw's anyway 😉
Initially I thought this guy really ought to get a life, then I watched with my jaw on the floor as he proceeded to restore this car, I am so impressed this guy is a motoring genius. Loved this video.
IKR?! Then I thought, "Dude you should get a bench so you're not working on the floor all the time" and then I was thinking, "wait, how long is this video? That's just the tranny and the engine and we haven't even gotten to the rest of the car yet..." I got a lot of respect for folks in countries and cultures like these that go by cars in this condition and decide to make it run again.
I really wanted to see the finished result of the car at the end but I was satisfied with what I watched for the most part(: Good work putting everything back together!!
This whole channel is a scam, the car has been sanded and rusted with a solution to make it look older He coated the entire body panels in bondo, and made it look like they were restoring the engine, transmission etc when they were really just poking around
Must say, knowing very little about cars and the mechanics, I was nonetheless looking for the punchline which finally came at the end. What grabbed me was not using heat resistive paint (I think) and no use if a torque wrench. But still hats off to the effort. But I really think that engine and transmission will not go the distance. But again, Kudos my friends! Looking forward to some of your next projects.
I'm sorry you were unable to finish this project. If you start a GoFundMe or Patreon page, maybe you can get the funds to buy the parts. Good luck! (PS I'd be willing to donate to the project!)
It's a facelift model. You can see the front bumper. So built from 1987 onwards. The car is no more than 34 years old and not 50. But this is not what an E30 looks like after 30 years if it is not processed with chemical substances!
Not even with chemical substances you can create rust on those plastic bumpers this e30 has. It's all just fake in this "restoration". Just for the clicks.
e30 four-door sedans were introduced in 1983 so youre absolute 100% correct... in fact its not even 40 years old and depending on when it was made it could be only 30 years old.
Great work and effort but I didn't see any use of a torque wrench so I wonder how long the car will stay together after he reassembles it. Also not sure how there are no crack lines on all his tile floors with all that surface hammering as he disassemble parts.
so you guys just put paint on some stuff and then use the same old stuff back in the engine, old main bearings, old head gasket, same crusty cluch even the same o2 sensors. I'm not trying to be mean but dont call this a restoration. My heart aches watching this. Painting old stuff and put it back together is not restoration.
not even if he didn't decarbonate the pistons since they didn't change, he didn't adjust the cylinder head valves, there's one of them about 15 centimeters away from the correct place
This what I did when I was a kid, I took apart a bunch of things thinking I would put it all back together and pant some of the parts but never ever finish anything. Come to think of it that describes my entire life. Dam.
Loved the energy with limited resources no nit picking here keep the can do attitude and work ethic it will serve you well in life,nothing but respect.
Ermmmm... so where's the rest of the "full restoration"? I'm kind of curious to how the finished project looks. With a spray job in an open structure, next to a busy road, it can't be brilliant, but respect to your skills shown.
The description says it was a full restoration, but after I lost 40 minutes of my weekend, they show a brief message saying that due lack of spare parts , they were unable to finnish the project. And the car is not 50 years old, it is about 40 years at most.
Yeah man they did not even replace the oil filter or torque the block correctly. They also put some playdough in for gaskets. This engine will blow up in ten seconds
...and the result is... where? Disassemble engine without replacing anything? Maybe it's an option. Its an E30 series chassis. The M10 engine is slightly different, it still uses weber double barrel carbs but the engine cover a bit high with no BMW embossed letter. It could be late 70's model but the front and rear bumper facelifted to 80's model, that usually uses the M40 engine. But, They really skillful and really know how and what to do. Even using only common tools. It's a two-thumbs up thingy.
he used no tolerancing on the crankshaft or balancing, it'll run like shit even if he manages to finish, and the head gasket will last till the end of the driveway, cough, cough, excuse me, dirtway
43:20. Taking into consideration all the cleaning he did, I'm surprised he didn't remove the carbon from the top of the pistons. Is there something wrong with doing that? And how does one compress the rings by rubbing a piece of wood around the top of the pistons? I don't get it.
Can’t wait to see the oil spewing out of those hand cream gaskets he applied! Otherwise, very impressive, just wish we could see the end result and if it ran!
I won't believe it if it doesn't leak all the oil!!! I've never seen this type of seal on engines!! Eu não vou acreditar se não vazar todo o óleo!!! Nunca vi esse tipo de vedação em motores!!
*I am an ASE Certified Master Mechanic, now retired in the Philippines.* This was not a proper refurbish or rebuild, but good effort put out for a 3rd world country mechanic. There is NO comparison to how this would have been done by a certified master mechanic, with a torque wrench, full rebuild kit and proper metal work *(Not bondo)* on the body.
а дальше видео и не будет. Просмотры собрали и пипец. Ты посмотри как они коробку и движок собрали. На герметик! уверен на все 100% что масло потечет со всех щелей
They gave up before they even started. They have known all the time that they didn't actually restore anything. It's all fake. They have just been doing it for the youtube views.
It's amazing how well you did with that old 3 series, it was a real pile of scrap , in fact it was such a transformation you turned it into a 5 series 😉
At 6:49 he threw out a CD from the back seat. This car couldn't have been abandoned any earlier than the 80s. Having said that, this was a very inspiring effort considering the tools her had to work with. Well done!
Don't stop. continue this project
👍👍👍
Yes ,continue !!!!
Up
Up
Im so mad for going against the nay sayers while watching this series. This was a classic bait and switch. I am offended.
It's amazing how this bmw was abandoned 15-20 years before it was built.
That's why it was worth restoring - it was an extremely early prototype !
🤣🤣🤣🤣🤣👌
😂😂😂😂😂 BMW E30 1965...
F
👍👍😎😎😎😎😎😎
Abang ini ternyata pakar keta BMW,saya suka keja abg teliti, focus dan benar2 menghayati keja abg ketahanan mental abg terbaekkk mmg geniuse orgnya, all the best abg, dgn ape yg abg lakukan, saya doakan sgala benda yg abg lakukan dipermudahkan, jagadiri dan selamat, tk
Mereka Ini dari negara mana ya?
Itu mobil bekas kebakar apa yak??
@@WawanWan-ux5mg bukan kebakar..itu sengaja seluruh body di klotokin catnya, trus di siram air garam sebody..stepnya persis anak² mobil yg doyan rusty.
Itu mobil kalo emang abandoned lama di tempat terbuka kondisinya ga akan seperti itu, pasti lebih parah..apalagi dengan kaca terbuka dan beberapa part masih banyak yang nempel/utuh... Smua itu demi konten hahaa
Hello guys I have been watching some video and I was thinking about investing in bitcoin/forex but still don't know where to start from.
I will recommend expert Mrs Alice trading service for you her trading strategies are top notch
It's been four mouths now I started investing with her and it's been a delightful experience
Bitcoin trading is the best when you are on a profitable based platform
Who is this professional broker everyone in talking about l always see her post on every RUclips
What is the most reliable way to get in touch with her
Guy doesn't even have serious machines at his workshop. All he has are the skills. This is so inspiring.
Look that video pc restore
لالالالالالالالالالالالالالالالالالالالالالالالالالالا😡😡😡😡😡😡😡
تيس من قبل قوات الأمن من تواجدها في هذا 😡😃
@@joaomundanarojas2596 I think every teenager has gone through an engine without an engine stand, proper tools….
This IS what you(ANYONE) CAN and WILL DO WHEN they EXPLOIT their FULL potential, 🤣🤦♂️🤣...imagine, and they can, 🤣🤦♂️🤣; but let's just say "imagine" if people REALLY took care of themselves, mentally, physically, and emotionally, 🤣🤦♂️🤣....they'd become "gods", 🤣🤦♂️🤣.....like you see here....NO needs for the "tools" YOU ARE your own "tool"!!!!....people ONLY see themselves as people, that's why they remain as such, NOT knowing their TRUE selves, and THEREFORE EXPAND their TRUE POTENTIAL!!!🤣🤦♂️🤣...thank God, source, the universe, whatever you want to call it, 🤣🤦♂️🤣...I AM One of them(like the "kid" you see here) 🤣🤦♂️🤣....cheers, 😁✌.
That’s a late 80s early 90s big rear light so 87 onwards E30 3 series. So 33 years old max.
idk what u said but it sounded profesional so im going with that
@@fortunatopena1265 basically he said the BMW is a 1987 at the oldest.
Restauration?! Please see 3:26 of video And you'll see a rubber in bearing closed by "restaurator" Come on...
Yeah, can’t be 50 year old.
Yea its pretty obvious that this aint from 1971
If the youth in the USA had 1/10th of this young man's motivation, dedication and energy it would be amazing. My hat off to you young man, a job well done. Congrats on your accomplishment
Well, it's not really a job well done. It's just some guy posting nonsense videos to get people to send money. Everything he did was wrong. He pulled the head off the engine and put it back on with the old gasket, didn't use a torque wrench anywhere. The engine will not even run properly or last any time. All he did was damage. All this crap is just a con. Just like the pigs who injure and abuse animals while pretending to "save" them.
Hey Gary, the youth in the USA are to smart to start a massive project like this...we know the tolerances and actual engineering behind a car like this. don't blame us for being lazy, we just know what projects to avoid.
I absolutely can't believe how this video can have so many positive comments. This is no restoration...it's just destruction. Does no one here has at least any sense of how a restoration should look like? First..the car was prepared to look like this. I mean how is it even possible that those plastic bumpers on this facelift E30 could have any rust? By the lines on the door you can even see that there was some acid on the car to make it rust faster. Then you can see how he just puts filler on those rusty doors. This will last for about a year before the filler will crack up again. Repairing the engine like this is a complete mess. he dissasembles the engine and didn't take any note which of the bearing shells, pistons, etc. belong to which cylinder. This wouldn't be bad if all the parts would have been completely restored. But he just smashed the old pieces in again in any order. There are many little differences in radius etc. over time for each cylinder. After rebuilding the engine like this i'm pretty sure it won't last longer than a few kilometres/miles before the engine will blow up. At least..all sealing surfaces has been painted and all the correct seals are missing. This thing will leak oil, exhausts and every other possible liquid like hell. Sorry, but this video is a bad joke. Please realize that.
I think they initially not going to ride this car or use it somehow, they just cleaning and painting autoparts for RUclips content. Just like many many videos about restoring "abandoned and rusted" toy car models of 2020/2021 Lamborghini or Rolce Royce.
People will do anything for thumbs up and clicks.
He didnt even torque the bolts and every other screw to their recommended strength
Tamam amaöyledemekbeuenmedim.
yeah, those guys in viet nam can't even mod their scooters and now they can restored a car got more years than their age, lmao
Hats off buddy..... Impressive. I've seen people doing such projects in big garage with whole team and lots of equipment but this guy is one man army . Really appreciate him.
he both with cameramen
Thats why they have big garage and team of people of knowledge and skill what they doing not this clown...
Wait! .. Where is the rest of the video? I wanted to see the result!
He can only fix a engine
@@whatsaaappthesequel hahaha!!
Either the original owner or somebody posing as that, wanted the car back.
I don’t think this is 50 year old car but still their perseverance to repair it is magnificent
I agree...this is a 80/90's model...so it's not more than 35 years old
ujjñuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
@@kartoffelkaefer71 tá
डड)
I own a BMW E30 2 door .. This model came on the market in 1982 .. You can say that it is almost 40 years old..
Wow,how did that 1989 BMW 325i sedan get abandoned before it was even thought of therefore built!Crazy!
All I see is skill, this guys need to be supported by big companies....
This are the actual Brains.
Good luck to you pals
I agree
Now I have no fear.Absolutely confident of myself. You have set my minds up up on high places. Thanks
Is it because of the “nothing is impossible” feeling?
@@nunufyurbiznis7671 exactly
الله اكبر
@@belindahamilton2223 Good. Well, best of luck to you
Wow amazing talent,,,it's very difficult to restore a old BMW,,,I hope someday this old car,is good running condition,,,I am unsatisfied,,
terbaik guys..mantap servisnya..yg dislike tu memang xpandai guna kereta😀
So relaxing watching restorations.
Just told my girl that lol
But I said I don't know why I like watching this
TRUE
Not many people would even start a project from car in such a bad condition like this, but you guys are awesome you doing this with very limited equipment and I believe it's not easy to get new parts, but wow so much enthusiasm!
Good luck
It's fake. They aren't restoring anything.
Hahaha conteúdo enche linguiça da porra,passando paninho e spray pra ganhar com views e anúncios e dizendo que está restaurando.
Conteúdo falso
"not many"... actually no sane person would ever try to restore something this far gone... you literally need EVERYTHING new for this one so it makes no sense to even start.
That paintjob is seriously tight. Looks like it was done in a shop. Really good stuff
No respirator though, wow!!!
I just watched this!! Must have been posted twice. BMW (not 50 years old), Series 3 turns into Series 7. - its a miracle. New wheels, etc. Wish we had seen the inside. All in all this guy is awesome at taking things apart and putting them back together, he doesn't look old enough to drive!!
Thank you for uploading bro. My first time ever to see a stick shift on a Beamer. Sending love from Hawaiian 🌺 Island.
Hi how are you
&
First time manual in a bmw?? Omg how
this gets an A+ for effort. some funding for tools and parts would help this channel prosper. never give up.
Thank the Lord for people like you who have support & encouragement to offer instead of only criticism.
@@michaelmace924 os
@@michaelmace924 its a con my guy, you've been had
OmG! This much patience brother .really appreciate. By using manual tools only u did this ooof amazing .( Salute to your patience )
)
Pls complete rest work .
Adding this to my dream restoration project list! The transformation is jaw-dropping. Can't wait to see more of these incredible builds on your channel.
ആദ്യമായിട്ടാ ഒരു വീഡിയോ skip അടിക്കാതെ കാണുന്നത്. Pwoli vdeo muthe... Supprbbbb...
He's not fixing it he's KILLING IT
Agreed. I saw a lot of parts cleaning and reassembly. I’m not sure if any parts on it are new. I have a lot of doubt as to if the engine will even run, especially given it sat without an air cleaner.
he's FIXING it though right?
@@alisa2316 No, it's complete nonsense. It's not even a BMW engine. It's all fun because people are actually buying it. The car wasn't restored They pulled a few bits off and polished / painted them. It's completely meaningless.
At the end they just film an pristine E32 and couple of stray dogs
Полная техническая безграмотность!
car is rusty outside, but there is no rust and holes inside! magic :)
ط
0
That aint magig it is possible that the inside is good
That’s a TRUE GENUINE BMW!!! And an antique one.
You are a lucky guy! 👍
IT’S TIME TO CELEBRATE!!!
This is E30 last MC, it was in 90's so this is about 30 years ago, not 50!!
And if you take a look close its all fake rust
correct
I totally agree.
yep. modell E36 (1990-1999)
they probably meant 50 years too rebuild lol
fantastic job, do you have part 2 of the video?
Would love to see how the engine ran after mixing up all the pistons and bottom end caps? New bearings with a sandpaper crank? Very interesting would love to know how long it lasted.
Like a bag of shite
I think the expression goes; polishing a turd.
None of this is a restoration , took the engine apart cleaned it and threw it back together. Took an easy panel to repaint and did a very quick repaint over rust. And noticed for months later they never made another video, same with all the bikes
Not to mention not a torque wrench in sight during the engine reassembly, just guessed torque spec with the ol calibrated eyeball
What is a bag of shite?
Great job. Does anyone know the song played first in this video? please I need the title.
No words.... All these comments about good restoration and more but.... Its just all about taking it apart cleaning and putting togeather with no care, wheres the restoration part? Re-using old head gasket and bolts and torque specs? Lmao don't repeat after him... 100% Car wont even start...
yes sir thanks it seemed i was the only fool who changes all gaskets plus many other disasters i saw
Yes, It's just made up youtube stuff, I'm car mechanic and I'm very sure as well it won't start.
He just rust spray painted it for the video, cars don't age like this and look at the rusty plastic bumpers...
Everyone has to learn somewhere he is young and he is working with very basic tools, somebody should have told him you need a piston ring compressor🤷♂️ as for the gaskets bm's leak oil from the factory anyways so it will be like most bmw's anyway 😉
wtf was that?same old prev videos in one and its not finish...very misleading title
@@veljaivanovic76 🤣🤣
ruclips.net/video/admxPwHtPvM/видео.html
People those who restore things are the real environmental heroes, regardless of who n what they are✌✌✌.
My thoughts exactly.!
I have now watch several of your videos. They have all been entertaining. Thank you.
Where's the rest of the video? I want to see the completed car! That was badass!!!!!
If there is no completed car im quitting early, thanks.
@@williamavery9185 No sir. Should have been labeled PART 1.
Is there a vol 2 or are you still working on your project?
see my above comment lol
Initially I thought this guy really ought to get a life, then I watched with my jaw on the floor as he proceeded to restore this car, I am so impressed this guy is a motoring genius. Loved this video.
IKR?! Then I thought, "Dude you should get a bench so you're not working on the floor all the time" and then I was thinking, "wait, how long is this video? That's just the tranny and the engine and we haven't even gotten to the rest of the car yet..." I got a lot of respect for folks in countries and cultures like these that go by cars in this condition and decide to make it run again.
it's a con
Impressive however I'm positive that's been sprayed with a rusting agent cars don't rust like that
Not to mention the fact they probably destroyed it
Great work👍
when is the next clip available? i want to see the car start and drive.
I really wanted to see the finished result of the car at the end but I was satisfied with what I watched for the most part(: Good work putting everything back together!!
This is amazing, I call this the "slipper sandal restoration"
Indo detected wkkwkw slipper sandal anjim
@@wawanpbg anjim udah gua duga
@@HIROHITO_NIPPON b
Are you sure these bmw being abandoned for 50 years , look like some 3 series manufactured in 80s?
This whole channel is a scam, the car has been sanded and rusted with a solution to make it look older
He coated the entire body panels in bondo, and made it look like they were restoring the engine, transmission etc when they were really just poking around
@@ChrisMX9 Thats why I find it so funny when people are like "This is so inspiring" and "He has no workshop, only the skills. God Bless."
@@offmetagaming6416 yeah and they're waiting for part 2 when they intentionally cut before they reassemble it because they'll never do it
@@ChrisMX9 exactly
This chanel deserves more than 100M subscribers
Must say, knowing very little about cars and the mechanics, I was nonetheless looking for the punchline which finally came at the end. What grabbed me was not using heat resistive paint (I think) and no use if a torque wrench. But still hats off to the effort. But I really think that engine and transmission will not go the distance. But again, Kudos my friends! Looking forward to some of your next projects.
Er zzz
S
yeah he didn't do tolerancing on the crankshaft placement, he just placed it in, lol
Hello from Russia ; Rostov here
Your nice job!
No way, no way, I don’t believe. It’s magic .
Congrats from Brasil.
Kkkkk
Duplaze modaful
I don't have words for explain the job you done 😮.Keep It up Brothers ❤️❤️❤️.
I'm sorry you were unable to finish this project. If you start a GoFundMe or Patreon page, maybe you can get the funds to buy the parts. Good luck! (PS I'd be willing to donate to the project!)
wow, spoiled it. i shouldve never read comments
You would help me finish the car seriously? You are so kind. If you are serious Id love to take you up on your offer!
Would like to see the finishing and first cold start. Lovely and inspiring.
Unfortunately he gave up
It's a facelift model. You can see the front bumper. So built from 1987 onwards. The car is no more than 34 years old and not 50. But this is not what an E30 looks like after 30 years if it is not processed with chemical substances!
Looks like it was burned but just on the outside lol...but yeah probably battery acid made it look like that
Not even with chemical substances you can create rust on those plastic bumpers this e30 has. It's all just fake in this "restoration". Just for the clicks.
Great work 👌
If you've saved an BMW E30, you're a God ! But where is the end result ?
In the end of the video, they said they don’t have all the parts.
@@Amtcboy hahaha
And its not A 50 years old BMW
e30 four-door sedans were introduced in 1983 so youre absolute 100% correct... in fact its not even 40 years old and depending on when it was made it could be only 30 years old.
It is
It is E30 lift model up to 1990
And it doesn't matter
@@e36fanatics q%q
I'm waiting for next episode.
x2
ruclips.net/video/admxPwHtPvM/видео.html
I am impressed by the talent of this young man
Great work and effort but I didn't see any use of a torque wrench so I wonder how long the car will stay together after he reassembles it.
Also not sure how there are no crack lines on all his tile floors with all that surface hammering as he disassemble parts.
I was gonna say the same thing. That will fall apart so fast. Gotta say though, that engine lift is pretty awesome!
Please finish this restoration it would be great to see it done.
Well until it throws a rod
Plz upload next part...soon
No właśnie, gdzie jest drugą część???
I thought that I have seen everything on restoration but spoke too soon. I ran to this channel and oh boy, you are monster!!!!
so you guys just put paint on some stuff and then use the same old stuff back in the engine, old main bearings, old head gasket, same crusty cluch even the same o2 sensors. I'm not trying to be mean but dont call this a restoration. My heart aches watching this. Painting old stuff and put it back together is not restoration.
What do u mean by restoration?
@@Gngr246 replace bushings bearing and gaskets is key for a restoration
not to mention the lack of torque specs, and he just sat the crankshaft into place, like bruh, you need to use a micrometer for that.
@@uncommonsense360 for real
not even if he didn't decarbonate the pistons since they didn't change, he didn't adjust the cylinder head valves, there's one of them about 15 centimeters away from the correct place
E30 car is made in middle or late 80s, that means 2020-1985 is not 50 years and average 30 or 35 since it was made....
yeah dont try to tell them, theyve even liked comments stating that and still keep milking the 50yo
No words. Just clicked on like and subscribed for your efforts. 👍
I love it . Like to seeing you inn hobbi wonder. Good stuff . To see more thankful. Aziz moh.
BLOODY MARVELOUS. This bloke's a genius with cars
Se eu desmontasse um desse, na hora de montar de novo ia sobrar uns 200 parafusos e umas 40 peças kkkkk
Imagine the actual owner showing up after watching this video and going, "thanks for the restoration"
if it's abandoned property they cannot claim the car again. ;)
Hihihihi
@@strangeboltethedeadchannle666 x
Are
The car "ain't" going anywhere....whether they show up or not. LOL!
Nice find I had a DOHV 4 and it was crazy fast
I would love to see BMW appreciate this effort 🙏😍
Can we all just appreciate his Helmet/Cap 😂 Im loving it 😂
Thats a Cap horse riders are wearing 😆
สยามเมืองยิ้ม
เราคนไทยนิไสดี
ไม่กินเห
ล้าไม่กินยา
โปดเห็นใจด้วย
i hope you get what you need to complete this. lookin forward to the end product. well done.
50 years old e30 right? pertty impressive that first ever e30 produced in 1982 :D
This what I did when I was a kid, I took apart a bunch of things thinking I would put it all back together and pant some of the parts but never ever finish anything. Come to think of it that describes my entire life. Dam.
Lol, same here.
That's why some of them record the entire process
YA GOT THAT RIGHT
Damn🤣
Loved the energy with limited resources no nit picking here keep the can do attitude and work ethic it will serve you well in life,nothing but respect.
Ermmmm... so where's the rest of the "full restoration"? I'm kind of curious to how the finished project looks. With a spray job in an open structure, next to a busy road, it can't be brilliant, but respect to your skills shown.
Nice job done both of you.
The description says it was a full restoration, but after I lost 40 minutes of my weekend, they show a brief message saying that due lack of spare parts , they were unable to finnish the project. And the car is not 50 years old, it is about 40 years at most.
Yeah man they did not even replace the oil filter or torque the block correctly. They also put some playdough in for gaskets. This engine will blow up in ten seconds
Nothing but click bate they could be honest in the title of the video but they don't give a crap about wasting anyone's time at all.🤷♂️👍✌
This car is a BMW E30 probably from mid-end 80's early 90's. I think it has 30-35 years and may be "abandoned" how many, 5?
@@frjose2007 And BMW M10 engines ... a very old engine... ☺
@@vladredline2767 No Toyota engine
PLEASE DON'T STOP. I want to see the project 100%
Who can see how the car looks with the new paint. 😎😎😎🚗
...and the result is... where?
Disassemble engine without replacing anything? Maybe it's an option. Its an E30 series chassis.
The M10 engine is slightly different, it still uses weber double barrel carbs but the engine cover a bit high with no BMW embossed letter. It could be late 70's model but the front and rear bumper facelifted to 80's model, that usually uses the M40 engine.
But, They really skillful and really know how and what to do. Even using only common tools. It's a two-thumbs up thingy.
he used no tolerancing on the crankshaft or balancing, it'll run like shit even if he manages to finish, and the head gasket will last till the end of the driveway, cough, cough, excuse me, dirtway
But it's just some little cylinder pushrod engine - not even a BMW engine at all.
cosa ha verniciato il filtro dell'olio, invece di cambiarlo?
anche tutto il resto e' stato montato senza cambiare guarnizioni e cuscinetti ... mah
That much hard work I can't even imagine ❤️🔥
Good job 👍 your fan from Saudi Arabia 🇸🇦
تشوف اللي اشوفه ...! عجيب والله ياهم خلوها وكاله ( وحنا عندنا سيارات تشتغل وخرابها بسيط وتدور على قطع غيار يقولك خلاص مافيه شوف اقرب تشليح بيعها ولا راح بتتعب معها ) 😅
صدقت يا خالد الورش عندنا اجرام لا فيه امانه ولا اخلاص في العمل شغل اي كلام الا ما رحم ربي
Megulta
Посмотрел, встал из-за стола, подошёл к окну, закурил... Много думал... Плакал...
А продолжение FULL видел?
@@DENRICH а где посмотреть?
@@Cocucochnik
Так и я о том же! ... 🤔
Vgghgh
Просто рыдал, где продолжение? Я ещё не все слезы выплакал
43:20. Taking into consideration all the cleaning he did, I'm surprised he didn't remove the carbon from the top of the pistons. Is there something wrong with doing that? And how does one compress the rings by rubbing a piece of wood around the top of the pistons? I don't get it.
just saw the video and thought the same thing. at least he could've used a solvent to wash it off
Can’t wait to see the oil spewing out of those hand cream gaskets he applied! Otherwise, very impressive, just wish we could see the end result and if it ran!
Was about to comment the same thing. Lol!!
I won't believe it if it doesn't leak all the oil!!! I've never seen this type of seal on engines!!
Eu não vou acreditar se não vazar todo o óleo!!! Nunca vi esse tipo de vedação em motores!!
Came to say the same thing but knew in my heart it had already been said lol
Maybe it didn’t run
Ugh...You guys that high temp white gasket sealer, industrial strength.
The knowledge they have of a car...god damn that is impressive
did they pva that transmission, engine, etc together? can't fault the commitment and effort shown here.
صصصي
Bçrly
Həchsu
what's PVA?
@@uncommonsense360 school glue
First time I watching fully video on RUclips 🤩🤩🤩🔥🔥🔥
Nerelisin
*I am an ASE Certified Master Mechanic, now retired in the Philippines.* This was not a proper refurbish or rebuild, but good effort put out for a 3rd world country mechanic. There is NO comparison to how this would have been done by a certified master mechanic, with a torque wrench, full rebuild kit and proper metal work *(Not bondo)* on the body.
Супер 👏 видео. Работа огромная. Для очищения деталей корпуса думаю лучше пескоструй подойдёт. Быстрее)
а дальше видео и не будет. Просмотры собрали и пипец. Ты посмотри как они коробку и движок собрали. На герметик! уверен на все 100% что масло потечет со всех щелей
@@keksmen86rus да пофиг)))
When people tell you they can't finish a project because they don't have the tools... show them this video. Unreal.
They need bigger payment
@@adidudod1220 And necessary Skills.
Show this to a mechanic and he will probably die from laughing.
You can see from the title how much knowledge about cars these two individuals have.
They should say they don't have the skills to do the job
They have tools you fool
Good job I liked it so much 😘😘
You wanna tell me that i waited 2 months just to see how you completly destroyed a car? I'm the unrespect button 😡
lol. At least they removed some trash from the countryside.
restoring man...
Cdn?????
I guess ı started thinking like you after this video. I wanna see running this car all in one.
Даже бл масленный фильтр не поменял просто отшлифовал ,мда
You have a fanbase that could support your build. Make a fundme page or something, dont give up
They gave up before they even started. They have known all the time that they didn't actually restore anything. It's all fake. They have just been doing it for the youtube views.
@@HGSolberg yeah, freshly painted oil filter is like brand new ;)
Kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkķkkkk
Kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkķkkkkkķkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkķkk
Kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkķkkkkkkkkkkkkkkkkkkkkkķkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkķkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkķķkkkkkkkkkkķkkkkkkkkkkkkkkkkkkkkkkk
It's so amazing ..but i would love to see the result. Damn. He must need part's
I'm ticked that we couldn't see it all.😡
If i try to modify old car then how do i fix the rusted and damaged parts of external body of car
It's amazing how well you did with that old 3 series, it was a real pile of scrap , in fact it was such a transformation you turned it into a 5 series 😉
7 series, not 5
At 6:49 he threw out a CD from the back seat. This car couldn't have been abandoned any earlier than the 80s.
Having said that, this was a very inspiring effort considering the tools her had to work with. Well done!
I think this car is not older than 1987.
Good work! it would of been better to see the car rebuilt ,now all parts have been restored.
( or have I missed that part of the video? )
Bonjour l'ergonomie du poste de travail !! c'est quand même pas compliqué de s'installer sur une table !