Installing a front blade kit on a John Deere X300
HTML-код
- Опубликовано: 7 авг 2024
- This video covers not only the blade installation, but the rockshaft and linkage installation as well.
Links to JD's manual site for instructions:
techpubs.deere.com/en-US/Sear...
techinfo-omview.apps-prod-vpn...
![Megan Thee Stallion - Mamushi (feat. Yuki Chiba) [2024 London Performance]](http://i.ytimg.com/vi/pxTCJUuorKc/mqdefault.jpg)
I watched your video about a year ago and did not get a chance to comment. So I ran across your video again and wanted to add my 2 cents. You did a very good job of explaining everything and you didn't over do it. You may have practice explaining how to learn things. Anyway Great Job, Keep it up. And Thanks.
You have a real talent for teaching. I don’t have any mechanic experience and was able to follow your video step by step and get my tractor ready for this snow storm. You’re really helping people, thank you!
Foggy, I just bought an old x320 and feel very much better about understanding how it all works thanks to you. I plan to install a front blade so this particular video together with the one the lift assist were super. As others have mentioned you have a great way of explaining it all. I also liked the one on tire chains too. Thanks
Great job! Just picked up a 320. Was curious about the plow. Thanks for showing us how to hook it up! Let’s not forget the spring idea to hold the pin back. Genius!
Thank you for your informative video. My X300 is identical to yours, and I have the same blade along with the 44" blower. I've never had any issues with the rear linkage, but in preparation for this winter season, I discovered that I had with a missing pin on the rear linkage at the connection point with the rock shaft. With the aid of your video, I was able to reinstall the linkage with the proper orientation, with the adjustable end at the rear rather than facing forward. Your video was a big help!
Enjoyed this video. Bought an X300 and it must have the rockshaft already installed so this helped me figure that out. Mine has the spring kit because I have a 48" deck. Works slick.
Outstanding video! Thank you!
Thanks for this video, you made the install so easy 😀 unlike the written directions I acquired from John Deere.
Good demonstation. And you could have mentioned the 4 weights available that sit on the rear bracket. I'm in New Hampshire and the tire chains are a necessity for me, but the weights are really the icing on the cake! [I have the 44" blower and the X370 which has hydraulic lift for mower & blower as well as power steering]. The X370 was a nice upgrade from my 14 year old D100 with manual everything. Bought the D100 new and never had any trouble with it; so it sold on Craigslist in only 6 hours !!!
Exact same happened to me on a jd x320 mounting a snowblower excellent video thank you keep up the good work
😀 I am so glad I found your videos; they are very easy to follow and extremely helpful. thanks a ton!
Thank you for your great instructional video. It really helped to get my blade mounted and installed. 😊
Super helpful video. Thanks for posting. Saved me a bunch of time and potential issues. Greatly appreciated!
Great to hear!
Outstanding video, really appreciate you posting it! I just bought what I think is this exact model, a 2011 X300, and the craftsman bracket & blade aren't compatible so this really helps out. Thanks!!
That’s the problem with mine. Bought the same tractor almost still brand new. They didn’t have a mower deck on when I bought but did have a plow. The guy I got it from put a brand new deck on it but when he took the plow stuff off I guess he didn’t give me all the parts. I have the rock shaft still installed but the smaller arm link and the black bracket is missing. Now it’s snowing I don’t have the plow working 🤦🏻♂️ still a good mower and I’ll have to track down the parts. Thanks, you helped me figure it out!
Getting ready to put mine on for the first time. Good stuff! Subbed 🇺🇸
Thanks so much - couldn't have done it without you! The picture instructions they came with the kit just weren't doing it for me :).
Glad I could help!
What is the kit number. I'm having a hard time finding any information
Nice video. Very educational and helpful. Thanks
I have the blade and kit. I run chains and the 2 40# weights in the back i. its a great set up ,ive had mine 4 10 years and had very little trouble
They really changed the blade set-up on the post 2016 X series. I bought a new X350 last yr and the blade attachment is quite different and much improved.
I got a 2018 x570 as I understand it the post 2016 x 300 and 500 series use the same configuration, I could be wrong as how I'm reading this info.
Is this video accurate for the x350 install?
Great knowledge to pass along 👍🏻thank you
Chains and weights are absolutely necessary for a tractor this size. In my opinion.
I have a 2008 X300 48" deck and the blade kit. IMPORTANT! The directions have the tension spring direction backwards! it tells you to turn the spring the wrong way sending the nut the wrong way. Instead of clockwise, you have to rotate the nut counterclockwise to send the indicator nut toward the back of the tractor. Once I figured that out, The blade tension was perfect, and worked as intended.
It's also nice that most of the basic mechanisms installed don't have to come off for summer cutting. Only the blade, mount and linkage rod come off....whew. Otherwise, it would have been a major pain.
I'm still working on getting the rear tire chains on in under an hour though...they are a major PIA.
Thanks for sharing. You have a new subscriber!
Thank you for this video.
Great explanations. 👍
I have the same issue. I have an x304 JD, and when i called my local dealer, they quoted me somewhere in the ballpark of $500.
I don’t want to push snow I want to level my lawn same concept going to but this for sure
Thanks to @Foggy Tinkering, my snow blade is finally adjusted properly.
Great video! Do you recommend removing the mowers?
Do those mounting parts come with the blade or are they already part of the mechanism for the mower deck? In other words, if I already have a 48" deck, will just buying the blade be enough?
I can't really give you a straightforward answer on that. I believe you would have to buy a kit to install the blade (the rockshaft, links, etc), but I also believe you can buy each separately. The rock shaft and linkage are not part of the lift mechanism for the blade. Mine didn't have any of that stuff. You'll have to look at your tractor and see if the rock shaft is already installed. It will be poking out of the left side of the frame, just forward of the lift pedal. If it's already there, you're good. You'll just need the front blade, the black bracket that attaches it to the tractor, and a link to run from the rock shaft to the blade bracket.
Can the mower deck and blade be on at the same time?
Thank you for this! At 13:31 you install the "front link". I'm missing that part (previous owner didn't supply yet swears he gave me everything...) and have searched JD's website for a replacement, but I've yet to find one. It looks like something I could get at a hardware store but I don't know what it would be called. Any suggestions?
Yes, I think you could make a front link out of hardware store parts pretty easily. I have seen the ends come in various sizes in the fasteners sections, and I think they're usually listed as an "end yoke."
Deere PN's for the Yoke: 54M4422. For the Rod: M154097
partscatalog.deere.com/jdrc/sidebyside/equipment/72102/referrer/search/pgId/510984653
!!!! Very Good.. !!!
I just bought the same blade that you have but I have but it doesn't come with any hardware do you have a parts list that you can send me and where you ordered it from?
What model John Deere is that plow made for? I can't find a plow blade meant for the x300...
The blade (44") and everything else came off another X300. The blade alone I believe will fit several models. I think it's the bracket and linkage that is unique to the X300 series tractors (maybe X500 series as well). Mine is older (2008), so if you've got a newer tractor yours may be different, per one of the commenters below. The Serial Number prefix for my blade is M044FBF...
Try these links:
www.deere.com/en/parts-and-service/parts/
partscatalog.deere.com/jdrc/sidebyside/equipment/61166/referrer/navigation/pgId/431073487
I tried to attach it but the holes don't line up correctly for the rock shaft so the rock shaft doesn't come all the way out the other side. Also is it ok if the top part of the shaft hits underneath the tractor or should it move freely . I am wondering if we need to drill new holes
Sorry you're having issues. Perhaps you have a newer model that's got a different arrangement? Mine is a 2008, but I do not know for sure what years this kit would cover. I imagine you shouldn't have to drill any holes, and the rock shaft should not come in contact with any other parts of the tractor if fully installed correctly. I think mine would touch the steering link under the tractor initially, but once everything was bolted in, everything cleared.
Will this linkage work on a x310
that tractor going to be heavy enough to push heavy snow? seems like it wont? just wondering. i have a craftsman garden tractor from 1996 with a 20.5 twin . 6 speed hi lo with Ag tires out back with chains and weights. this thing will push some heavy stuff. nice video. i will step up to the 500 series for snow plowing. yours may be ok. here in nj i dont know. we got 30" 2 weeks ago..
It did fairly well. I never installed the snow chains, but I did throw a small amount of weight in the back. It definitely could have used more.
Thank you for posting this video. I had to purchase the piece parts from the JD dealer and there were no instructions. The problem I am having is the pedal seems to be workinp in reverse. Pushing it forward drops the blade rather than lifting it. Any ideas?
Well, I solved the problem. I had attached to the wrong pivot point on the pedal. Thanks to a screen shot from this video to point me in the right direction.
Sounds like something was upside down or backwards. I hope you got it figured out!
You should try a UHMW blade
Great video.Thanks! I have the X300 and am considering getting the blade. Questions: 1.) Does John Deere still sell the blade kit? I didn't see it listed on their website. 2.) Is it necessary to remove the mower deck when you install/use the blade? If so, how difficult is it to remove/re-install the mower deck? Thanks, again!
I don't know if the blade kit is still available. The best thing to do is find a dealer and ask. The deck needs to be removed to use the blade, and it comes off easily.
ruclips.net/video/jeIopDEqk4A/видео.html
@@FoggyTinkering Thanks for the reply and link to deck removal video. I’ll check with my local JD dealer abt the blade.
Question: can you detail what parts are able to stay on the tractor when you reinstall the cutting deck in the spring vs what parts must come off?
Most parts stay on the tractor. The only things you have to remove are the blade, it's front mounting bracket, and the linkage from the rock shaft to the front mounting bracket. The rock shaft (up under the frame) and it's components all stay on the tractor. They do not interfere with the mower deck.
Much appreciated, I’ll get to tinkering!
This appears to be a pre 2016 X300 series? Is that correct. Is this the same kit for 2016 and newer?
You're right. It's a 2008 model. From what I understand, the 2016's are different. I don't know when that change was made though.
I have a 2002 John Deere GX325 is this about the same procedure as the X300?
I honestly do not know. I have no experience with the GX series tractors
For some reason my blade won’t go back down on its own but will stay up in the air when I push the left pedal forward. Any thoughts?
If you have the tension spring (lift assist) installed, it may have too much tension on it. It could be your height adjustment knob is set too high. The knob will adjust the front blade height just as it does the mower deck.
@@FoggyTinkering thanks. I bought a used unit and I guess the guy had a snowblower before and I didn’t even realize it had an assist. Just made the adjustment and works great. Thanks
Can you put front this on gx75 ?
Haha! Likely not. I'm not sure they even had a blade offering on those little tractors
John Deere x380 Spring
John Deere x380 spring on and off
That's all right I got different shape and sizes different types of rods Parts anything I need to make this work