First Wera Tool you Should Consider!
HTML-код
- Опубликовано: 7 сен 2024
- Wera ToolCheck Plus Metric: amzn.to/3CmIxKv
Wera ToolCheck Plus SAE: amzn.to/3SO0vMM
Also available on KC Tool at: www.kctoolco.c...
Disclaimer, all or some of the links in this description are affiliate links and we will earn a small commission if you use them.
Was my first Wera purchase. Sent me down an expensive path… lol
Got a tool box (small one and it's got over 2k worth of tools in it all were.. Well worth it lol
I once found a wera stubby Phillips #2 partially buried. After giving it a deep clean, it was my best screwdriver. Now I'm interested.
Yes they will do that for sure! However once you have it unless it's lost or stolen you never need to replace them.
Ah crap, I have one on the way.
I’m an apprentice I keep my tools simple you don’t need these useless gadgets that your probably going to use once a year
I've had this for a while now and love it. Great deal for all the things that are in it.
Side note. Make sure that plastic cover for the ratchet is slid all the way up and clicked into place. A couple times I didn't click it in and the ratchet fell out. Luckily I didn't lose it.
Nice thing for a car
Finally, someone pronounced Wera correctly, well done!
Noone cares
I just got this kit today and made a small but very significant mod to it already.
I put a hole under the head of the ratchet so I can store it with the 1/4 inch adapter ready to go. To use a socket I don’t even need to open the main compartment.
This is how I went about it. With the ratchet in place I poked a hot straight pick tool down the middle of the ratchet hole. First just left a mark then checked for concentricity and adjusted before making a hole, then I proceeded to make the hole bigger with successively bigger drill bits but by heating the blunt end. I let it cool and removed some melted bits between each drill bit, ending in a 9mm hole that came out pretty neat.
The adapter lines up fair perfectly with the bit hole beneath it and I place the smallest Allen head bits in front of it. The main compartment closes properly and can be accessed without removing the ratchet. It basically looks factory, no one without the kit would even tell.
I love those. The first (of too many) Wera purchases. I needed some hex+ bits for a gazebo I was assembling from a kit (I stripped out a couple of the heads on the pan-head machine screws in the first twenty or thirty I drove, and then I switched, and drove over 1000 screws in a row without problems). Then I got the imperial set, some Allen wrenches, more bits and screwdrivers,..., and now I'm homeless, but with great tools.
At least you can almost build your own home 🥲
Ive had the metric set for a few years and love it! the mini rachet is my favorite tool
Got my first Wera tools yesterday! Two screwdrivers and an Allen key set. Beautifully made 👏
This has been in my everyday carry since i bought this! Been handy when i havent had my tool bag close to hand
I work on remote locations and have weight limits on what I can bring with me. This little set goes with me even it I have to stuff it in my pocket. I had to replace the plastic rivet with mini connector bolts. The little driver holder plastic rivet just would hold up, I had a mini connector bolt everything size set and a spot of lock tight.
Also an option is the Hazet 2300SH-1. It has 29 bits(18 are 25mm, 11 are 50mm). Also pretty much the same tools as wera
Totally agree!
I have a couple of these spread out and love them.
I'm a field service engineer and bought this on a whim, I installed a CNC machine and this set did around 70% of the work. Crazy versatile set and amazing quality, genuinely recommend it to anybody. Only negative for me, albeit a tiny one, is the locking mechanism for the swing out section. Over time it wears away and becomes completely loose. No big deal but worth mentioning. Cheers
This is my first tool set from Wera to keep with my motorcycle essentials kit. Wanted to buy their other full-sized tools, but boy are they expensive. Very hight quality though.
I have several Wera tools mostly screwdrivers but I definitely want to get a set of probably both of the imperial and standard sets like this one
In my glove compartment and insane how many times it's come in handy. I don't carry tools in my car bc I'm a tool hoarder and it would get crazy packed in my car.
I bought one 3 years ago, it’s a great set for general maintenance
I don't have many wera tools but the ones I do have are my favorite
I generally like to compile my own bit sets because I hate what pretty much all companies do when they include both security and regular bits for torx and hex. It's a massive waste of space that could be filled with other bits when you could just include the security bits because they can be used with regular screws too.
Wera makes top quality stuff. Anything you get you'll be happy with.
Laser tip screwdrivers should be the first I did not regret that one
I'd like to see their smaller bits in this pack since they're the best fitting precision bits I've used once you get into more standard sizes "cheapish" bits work/fit just as good they just break more often. But talking precision/small electronic bit sizes wera will always work/fit better then any Chinese garbage
I always like these little compact kits with everything you’d generally need all in one pocketable carrier. Knowing Wera, though, it’ll probably be about double what I’d be willing to pay for it.
Truth! Matt Risinger introduced me to this tool, and I never looked back
Great tools. However I bought a similar set from Walmart just for the bits. It was $10 and it had every single bit you could imagine and all of the really small bits too. I needed it to fix an Xbox 360. Well it’s 15 years later and I carry that bad boy to every job I go on and it hasn’t failed me. It’s really well organized and I just use the bits and an adapter.
I love this set!! I used it yesterday taking apart/fixing a washing machine. But the case holding mine together fell apart kinda. The end are wobbling around & the plastic pc holding the ratchet in keeps falling off. Still works as a whole but I just wish it could of lasted longer. Something plastic must of broke 🧐
Love this little kit, very useful and that tiny ratchet wrench can really take some torque, I had a 0.5 meter pipe on it and it didn't break.
I have that too, very useful.
I genuinely bought this set yesterday
That’d be a great tool kit to keep in a motorcycle bag
I bought a wera screwdriver handle without the bits at a amazon return pallet store and it's awesome didn't know the name of it till this video thanks btw definitely going to buy a set
Great brand warranty and customer support... great product
Had one of these sets for a while now. Great wee set.
it's on my wish list!
Just found this page…. I’m screwed lol. Love your channel and I subscribed
Would wait for them to bring out a new version of this, the screwdriver handle could be better, as could the tool assortment. It is close, but it is not quite there.
This was my first introduction to Wera tools! I came across it watching EDC and bugout bag videos. I fell in love the first time I saw it!
I have bought this set and I am satisfied. Quality is great. But it is very tiny almost like toys. The downside os you cannot put a lot of force on it. Ok for a quick fix, but if you do a serious renovation e.g. you need real tools IMO
Would be good to get this, the metric version and for anything doubled up like the Philips series, replace them with extra specially pieces like different size square drives...
Wera bottle opener!!!!! #1 and than the Wera 1/4” drive handle that accepts all tips/ bits #2
You're correct.
😎🔥🔧
One of the best mini ratchet on the market Point..
I recommend this for all cyclist. Keep it in your car. I'm a tech at a shop and it has everything you need.
I want it now
I started using wera because of the Christmas calendars
I have that particular set and works well
Literally every bitset i bought/got in the last 20 years had security torx in there.
Seen this and ordered it immediately
Already got two...going to buy third as people borrow but..
If it used the same bit ratchet as the Icon or Facom, it would be about perfect.
I hate that set because because you have to pick between Imperial and metric. If you buy both sets, then you end up with a bunch of duplicate bits and a lot of wasted storage space. I wish they would make that sit with Imperial and metric. It would be bigger, but not as big as two separate sets.
90% of the world does not _want_ imperial, though. Why would we want our streamlined metric tools cluttered up with a measuring system we simply never use - many of us not since the *Age Of Enlightenment* in 1795!
It's literally is only made for the American market. I sometimes wonder if/when the USA will finally realise that it might possibly be time to join the Enlightenment...?!
Hallo. Ich liebe die WERA Werkzeuge. Von diesem Satz habe ich selbst 2 Stück.
Gruß aus Bayern / Deutschland ;-)
It's a gateway into Wera world.
I have the older one and its beter quality with a beltholder on the side and an official button to acces faster and easier the bits
They're ok. Just the screwdriver is tiny.
Buy it! Love it! And then buy others weras
Fine I've just ordered one
I have that set its very good 👍
Got one use it in a factory
are those standard apex-style 1/4" bits or are they a proprietary size/shape
Craftright does a $15 alternative at bunnings
This set is great, I have that one. But Red Bull limited edition was better ❤ I had that too, but someone had stolen all my Wera tools from my car in Italy 😢😢😢😢😢💔
This is the gateway drug for their entire tool line.
Love wera
I am an engineer on cardiac heart bypass machines and this kit has replaced my big toolbox. The biggest downside is you cannot buy replacement bits individually.
you can, idk the shipping cost but kctool sells the single bits, I bent a slotted bit so had to look into it.
@@jamesrosenberg1612 cheers man, i appreciate the info
what's the point of having torx and security torx in the same set. Seems redundant. Can't you just use security torx on everything?
Love the kit but modified it to get rid of the duplicate bits and regular torx for a larger selection of security torx, hex and a smaller flat head and smaller pozi and philips. I fell like it's now hoe it should have come from the factory
Product links please!
What are its dimensions?
Nice thing for a car
Do they make this with BOTH metric and imperial sockets included?
No it's metric or imperial. The sockets are the only thing that it changes and you can see all the sizes take up the entire bottom.
Whats the product code/number of this wera tool set?
Great stuff. I can't recommend it to people who are getting started on their tool kit. Too expensive. You can get a ton more by buying other brands.
You got an Amazon link?
Wera should you start?
How much?
Whats the model of tge set?
I know they are expensive are they worth buying in the us?
IMO Wera makes nice very nice drivers, but their ratchets/sockets are not worth the premium.
Where do you order these? Or do you get them off a tool truck?
Are the tips impact rated?
My ratchet reverse lever has recently broken off. Half the price of a whole set to replace it and no signs of any service kit to carry out a repair. Rather miffed by this
how much $?
German engineering. You are welcome
These are great until after a while those bits get eaten up and are done for and now you have a set of with a bunch of missing tools.
Really just buy a small socket set at harbor freight and then buy a cheap bit set that has a case. I no longer buy any bit sets anymore because they are junk and a waste of my money. I just buy a 10 or 20 pack of the bits I need for my 1/4 impact. I have a set of special bits for the odds stuff. Star bits, square bits and allen bits all come standard with almost every set i have seen in the last 5 years. Also many kits come with stuff you will never use.
where can i get one like this
Amazon
What is the part #❓
Who makes it?
@@joelquinn2037 Whia
Wera tool check plus
@@luckymeziere3675 Thanks 👍🧰
How much is this set?
145 when its not on sale
Whats wera?
Why is it important
I never am able to get sockets off those dumb little clips. I'd destroy this thing after 1 use😅
0:00
Screwdrivers
🇩🇪🎯
Entire set for who
Get rid of that Chinese grip make it look more bad ass
Why are all mechanics have insanely huge hands 😂?
Full set of sockets 💀
Okay look I'm a welder and don't use the biggest variety of tools so so I may now understand this. But what possible use could this kit have? This looks like the most useless canadian tire homeowner kit you can buy. What good is a ratchet thats 4 inches like and s screw drivers miller than your hands. Someone's gotta help me out with this because this is stupid
Tool is nice but the case is poorly constructed to house them I had them sitting in my veto bag and the side panels came off held by flimsy plastic nails so no not impressed with this wera tool case!!
Not worth the money!
Wera uses ugly colors
I play with expensive tools everyday this isn't look good
Never used Wera? They’re Lifetime warranty German and Czech tools. They have a great reputation
Tf is a security torque ?! It’s called a star bit ya goon
Please do your research. I have. The bits I’m showing are not a “star” bit. In fact there is no such thing, there are Torx and Allen and these also have Security Torx with the center post.
What he said⬆️ ya goon😄
What the presenter said was "Security Torx". What the youtube automatic Closed Captioning came up with was "security torques". The robot failed, then you failed. Twice.