Liked how you made it so the mud didn’t fly up into the chassis. That was a good idea. Shocks look good, good tweak to the tires as well. Looks like a good vehicle.
@@ShenRC Great free and budget hacks! Great content! How low did you move the shell mounting pole? Can't really tell from the video. Was that half way? Thanks
@@rcast3763 Hi just lower them so the bottom of the body is as low as the chassis side so it blocks those vent holes from getting dirt flung in them... you also will need to trim off the bottoms of the front body post mounts when you lower them because they will come close to the A arms when they are fully compressed. Thanks for watching.
@@ShenRC i didn’t think about trimming the bottoms, thanks for the heads up. Just had it run for the first time, Low mode is fast enough for my 5yr old and Fast mode is fast enough for me too specially on the grass and dirt Thanks again!
Hello, thank you for the helpful video, one thing I noticed is the rear shocks dont have screws holding the bottom of shocks in. Did the oil filled shocks you added on fit or did you modify them to fit?
I have a 1/12 scale version of this with single motor. Very similar parts and chassis but chassis and eac is more exposed. Do you have any idea what its called i cannot find spares for it anywhere
Thanks for reading my comment mate. The chassis looks identical to the 9136 but it is larger and has the metal skid plates underneath just like the 9125.. Its really weird it's the model in between the two but as far as I can tell it doesn't and never did exist 😂Maybe I have a wired discontinued model.. Also instead of 2x 410 motors it has one large motor looks like a 540
@@ShenRC YES Mate you found it 9155 - actually I have the truggy version 9156.. Seems to no longer exist anywhere tho and I can't find any spare arms for it. Thanks alot mate any idea why this car was discontinued? It seems like it was replaced with the 9125
Hi I believe theirs a screw you loosen and you can move the posts lower and set the screw back in... I did this and also trimmed the bottoms off the posts so they don't hit the A arms when compressed.
Hi I don't recall but I lowered them so the body covered most of the side of the chassis...I also trimmed the body post bottoms off so they would not interfere with the suspension because they came out much lower and could hit the suspension if fully compressed.
@@milkforcoffee Hi I don't know ...search GPtoys on my channel I did a review of a nice blue one that is the same as this truck maybe you can search on the web and find the blue GPtoys body.
I do the upgrades. I have the same problem of the body. I use diffrent shock and i do the test. The shock do great reducing to the minimum the bounce. I don't now if you tested but this Hosim 9125 can use 11.1v lipo battery. The power they get is huge. Thanks for the tip they help a lot
@@ShenRC you can try but use one low mah 1000-1500 for test. I use and run according to waht they claim. If you use the 7.4 lipo is km become close to 34km
@@ShenRC depends one thing how fast the main gear or how low will be useless. 2s main gear give you hours have power but without replacing main gear soon. 3s that going to happen more often. I stick to 2s i want more fun
All You Can Do What a replacement battery to give me more run time and also maybe more power. Could you help me with that Im not very wise with this things Thank You
All You Can Do What a replacement battery to give me more run time and also maybe more power. Could you help me with that Im not very wise with this things Thank You
Hi guy's I see use a larger battery and they lay it on the top of the chassis and use a Velcro strap and go all the way around the chassis to hold it in place.
Hi Shen, is it safe to run 3S on a stock 9125? I see people running the 9125 on 3S with a fan. I'm don't know too much about electronics, so unlikely to know how add a fan.
They are junk they don't come with any specific amount of oil in them if you don't fill them your self then you are wasting your time as they will not work right and if you can manage to get the right amount of oil in them your luck if they don't leak. I don't waste your money there are plenty of aftermarket shocks that Will work much better and actually last longer that a single run.
Great videos as always man! Could you give some informations about the battery you are using on it? Is the stock one? Recommend the upgrade? I dont see much videos about it. Thanks !
Hi I am using the stock lipo pack, You should be able to use any 2s lipo that you can get to fit in it ..I also see guy's use larger lipos and mount them on the top of the chassis. Thanks for watching.
This vehicle is produced under many different names. With slight alterations. Many companies buy this from a central Source in China And renamed it. Hobbywing is making a killing by this method
I am having a problem with my Hosim 9125 ( I guess is the same car): ruclips.net/video/CRFxCqcgLwk/видео.html From my research the ESC is broken and needs to be replaced. I am curious how can I pair the new ESC with the remote? Do you know any instructions for that?
Liked how you made it so the mud didn’t fly up into the chassis. That was a good idea. Shocks look good, good tweak to the tires as well. Looks like a good vehicle.
😀👍Thanks this ones pretty good.
@@ShenRC Great free and budget hacks! Great content!
How low did you move the shell mounting pole? Can't really tell from the video. Was that half way?
Thanks
@@rcast3763 Hi just lower them so the bottom of the body is as low as the chassis side so it blocks those vent holes from getting dirt flung in them... you also will need to trim off the bottoms of the front body post mounts when you lower them because they will come close to the A arms when they are fully compressed. Thanks for watching.
@@ShenRC i didn’t think about trimming the bottoms, thanks for the heads up.
Just had it run for the first time, Low mode is fast enough for my 5yr old and Fast mode is fast enough for me too specially on the grass and dirt
Thanks again!
I absolutely love my 9125
It's pretty good for the $! Thanks for watching.
The air intakes are right where tire roost blows in. Lowering the body is smart
Thanks it worked great!
Nice video. I couldn't cut my tires. I ended up gluing them. Running them 3s and it's super fun in the snow.
On 3S it is fast! Thanks
Nice Gptoys S920 upgrade n tips ;-D
😎👍👍Thanks for all the great comments!
Awesome tips and tricks , excellent work and great video !!
😁👍Thanks Friend.
😊👍 @@ShenRC
Is there a tip on we’re you can balance the tires because it vibrates while I give a throttle holding it up in the air once the first I got it
Search youtube you will find how to videos. Thanks
Awesome upgrade! super cool! Nice! Love the video like always!
Hello, thank you for the helpful video, one thing I noticed is the rear shocks dont have screws holding the bottom of shocks in. Did the oil filled shocks you added on fit or did you modify them to fit?
Hi the oil shocks pop on the bottom A arm just like the stock ones do.
Hi, thanks for the review, stock suspension has 3 pairs, 2 pair of oil shocks will work fine? Thanks
Hi mine runs great with only 4 shocks. 👍
Nice tips Steve! Anytime you can prevent junk from getting in the chassis is a great thing!😊👍
👍Thanks, it won't stop it all but will stop a lot of it from entering in it for sure.
Great video
I opened up the air holes on the tires. Instant difference. Great tip!
Glad you enjoyed it
Cool! it does work wonders!
I have a 1/12 scale version of this with single motor. Very similar parts and chassis but chassis and eac is more exposed. Do you have any idea what its called i cannot find spares for it anywhere
Hi I am sorry I don't know there are so many types I can't tell without seeing the chassis.
Thanks for reading my comment mate. The chassis looks identical to the 9136 but it is larger and has the metal skid plates underneath just like the 9125.. Its really weird it's the model in between the two but as far as I can tell it doesn't and never did exist 😂Maybe I have a wired discontinued model.. Also instead of 2x 410 motors it has one large motor looks like a 540
@@sc-qd4si Take a look at this one I had is it this? studio.ruclips.net/user/videoxgI-XNDNepM/edit
@@ShenRC YES Mate you found it 9155 - actually I have the truggy version 9156.. Seems to no longer exist anywhere tho and I can't find any spare arms for it. Thanks alot mate any idea why this car was discontinued? It seems like it was replaced with the 9125
@@sc-qd4si Hi it's not discontinued ... you can get parts directly from hosim www.hosim.com/collections/parts-for-9156
How did you lower the body mount posts?
Hi I believe theirs a screw you loosen and you can move the posts lower and set the screw back in... I did this and also trimmed the bottoms off the posts so they don't hit the A arms when compressed.
Looks so much better lower, great job
😀👍 Beauty!
Hey bud Did you lower the body mounts to the lowest hole?
Hi I don't recall but I lowered them so the body covered most of the side of the chassis...I also trimmed the body post bottoms off so they would not interfere with the suspension because they came out much lower and could hit the suspension if fully compressed.
Do you know If its possible to upgrade the motors in the car?
Hi it probably can be done if you can find the correct size motors.
nice tips steve have fun RCing
😁👍👍 Thanks bud.
What should the length of new shocks be? 10cm?
Hi I don't recall GPtoys sells the set of oil shocks for these. Thank you
I have this same truck
Very cool mods!!!!!!!!!!
Thank you
Can you change the body on this truck? Are the mounting locations standard? If so, what size?
Hi it's not a true 1/10 scale body so I think your stuck with this body or the other colored ones companies use on this same chassis.
@@ShenRC Where can I find the colored ones? Do you have a link?
@@milkforcoffee Hi I don't know ...search GPtoys on my channel I did a review of a nice blue one that is the same as this truck maybe you can search on the web and find the blue GPtoys body.
I do the upgrades. I have the same problem of the body. I use diffrent shock and i do the test. The shock do great reducing to the minimum the bounce. I don't now if you tested but this Hosim 9125 can use 11.1v lipo battery. The power they get is huge. Thanks for the tip they help a lot
Hi your welcome, Yes I seen it run on 3s but I never tried it.
@@ShenRC you can try but use one low mah 1000-1500 for test. I use and run according to waht they claim. If you use the 7.4 lipo is km become close to 34km
@@allyoucando8486 I think it is pretty good on 2s 3s must be crazy!
@@ShenRC depends one thing how fast the main gear or how low will be useless. 2s main gear give you hours have power but without replacing main gear soon. 3s that going to happen more often. I stick to 2s i want more fun
All You Can Do What a replacement battery to give me more run time and also maybe more power. Could you help me with that Im not very wise with this things Thank You
Number one like, yeah buddy!
😁👍Thanks bro!
Good upgrades. It will be fun to see a comparison of the two runs.
😎👍Thanks I think it's going to run great now!
I like the low cover. I wish I can apply it to my rc. I put 4s and fpv to my Xinlehong 9125
Yes the lower body looks nice and also blocks dirt from getting in the chassis. Thank you
@@ShenRC ruclips.net/video/S8nOiL3SZms/видео.html
Can you fill the stock shocks with oil?
Hi na they have no seals maybe some thick as heck tacky grease coating the inside of the shock body may help?
Nice steve for cheep trucks gp toys/ what ever other brands there under are good little trucks for cheep👍👍👊
😀👍Yea this one is pretty good. Thanks
Awesome tips and upgrade my friend thank you for sharing Hope you have a great weekend full watch and Like 👊✈️
😀👍👍Thanks.... next some testing!
Like the wheel idea Steve, great tips and a great video bro 👍😁👍
😁👍Thanks, can't wait to test it out now!
All You Can Do What a replacement battery to give me more run time and also maybe more power. Could you help me with that Im not very wise with this things Thank You
Hi guy's I see use a larger battery and they lay it on the top of the chassis and use a Velcro strap and go all the way around the chassis to hold it in place.
where do you get steering servos and esc's from?
Hosim has a website I believe you can order from.
@@ShenRC sweet cheers I got real rc cars lol but I regret buying these piece of craps for kids .... although one of them has never had an issue
With the tire upgrade it won’t reduce speed ?
Hi you speaking of making the wheels vent hole larger to let the air out more easy? If so no this will not change it's speed. Thanks for watching.
What size whole maybe a regular screwdriver size or smaller drill bit ?
Hi I made the hole like 3 times larger and used a exacto knife to do it ... you can use a drill bit also.
Nice uprades Steve. Looking good 👌
😁👍Thanks, I can't wait to test it outside now!
Nice 👍😊
Thank you! Cheers!
Very cool mods👍👍
👍Thanks, have to run it now!
Hi Shen, is it safe to run 3S on a stock 9125? I see people running the 9125 on 3S with a fan. I'm don't know too much about electronics, so unlikely to know how add a fan.
Hi no it's better to run 2s more stuff will just start breaking on 3s. Thanks for watching.
@@ShenRC thanks Shen, I love your style!
Is this work on hosim q905?
I think so I think they are the same truck?
Did you have to add oil to the GP oil shocks or did they come filled?
Hi I had to buy them and install them, these come with just spring shocks out of the box.
@@ShenRC Yes but did you have to add the oil or were they prefilled?
@@DENSUTUBE2008 Hi they came with the oil in them. Thanks
They are junk they don't come with any specific amount of oil in them if you don't fill them your self then you are wasting your time as they will not work right and if you can manage to get the right amount of oil in them your luck if they don't leak. I don't waste your money there are plenty of aftermarket shocks that Will work much better and actually last longer that a single run.
Great tip👍👍
😎👍 Thanks very much friend.
Awesome!😊👍
😁👍Thanks for watching.
The lower body does make it look a bit mini Erevo.
😎👍👍 Yes it does for sure. Thanks bud.
Looks like a nice truck, good upgrades👍
😎👍Thanks, can't wait to get out for a test run!
Great videos as always man! Could you give some informations about the battery you are using on it? Is the stock one? Recommend the upgrade? I dont see much videos about it. Thanks !
Hi I am using the stock lipo pack, You should be able to use any 2s lipo that you can get to fit in it ..I also see guy's use larger lipos and mount them on the top of the chassis. Thanks for watching.
@@ShenRC thank you very much!
Nice tips as always
😁👍Thanks
I have the 9135 1:16th, can I put the 9125 1:10 wheels and tires on it?
Hi no that would definitely burn up your motor.
Great tips Steve!
😎👍 Thanks Void X
Nice brother!!!
😁👍 Thanks for watching brother!
Interesting video with great information. Well done!
😁👍👍 Thanks , Have to test it out now!
Nice brother
😁👍👍 Thanks brother.
@@ShenRC 🦅🤙👍
Nice brothers.
😁👊 Thanks for watching.
These seem built better than the 2wd stuff
😁👍Yea this ones pretty nice so far all good with this one. Thanks ...O is this the P-C RC curse you putting on this truck! LOL!!!
@@ShenRC Cursed!!! The next time you jump it in a wooded area it shall break!!! lol jk
Are GP and Hosim the same thing? They look like identical cars with a different name.
Hi yes there is actually 3 different names I seen with this same truck.
This vehicle is produced under many different names. With slight alterations. Many companies buy this from a central Source in China And renamed it. Hobbywing is making a killing by this method
Cool cool. 👍✔.. NC MOUNTAINS
😁👍Beauty!
Wheelbase?
Hi it has a wheel base of 8- 3/4"
I have this same truck
😎Cool!
The tires look to big for the body
😁👍 Yea I slammed it the stock trucks body is lifted way up high. Thanks bud.
Like a low riding rock
😎👍Cool! Thanks
👍🏻
😎👍👍 Right on!
CARRO TOP
😎Cool glad you liked it.
🐢🐢👍
😁👍👍 Thanks man!
I am having a problem with my Hosim 9125 ( I guess is the same car): ruclips.net/video/CRFxCqcgLwk/видео.html
From my research the ESC is broken and needs to be replaced.
I am curious how can I pair the new ESC with the remote?
Do you know any instructions for that?
Hi I am sorry I do not know, you can e-mail hosim search they have a website and sell all replacement parts also. Thanks