2019, 2016 to 2023 have all the same beds. I have another video showing how far the trunk opens with a bed cover. ruclips.net/video/M55W_ApHTys/видео.html
thanks for the video. i can't tell what the materials are like, do you think it would be possible to drill into it to add a couple tie downs points? I wouldn't use them for anything crazy heavy. most likely couple pairs of skis or an inflatable paddleboard or two during. memorial day trips the two seasons overlap and i take both with plus camping gear for 4 people. so i'm looking to add the option for storage on top of a tri fold cover for those seldom times the covered bed isn't enough
I see you kept the top tiedowns at the tailgate. I don't understand why the instructions say to remove them. Did you get longer torx bolts or just reuse the originals?
I have the 2019 Ridgeline. I want to get the OEM cover but I also want to get the Ridgeline tent. If I get the Backflip cover instead, do you think I could set up the tent without removing cover since it folds up against the rear window?
Nice video! I'm looking for a tonneau for my 2021 RL. Do you have a review on this Honda? Can it carry any load on top? Or will it support a person standing on it? Have been looking at the more expensive Diamondbacks, which support either 400(SE) lbs or 1600 lbs(HD), but this one seems easier to install and remove. And less expensive.
I think this would be a much better video if it started with the original installation. The video is well made but I would like to see the installation from the start.
Sorry I sold mine and now regret not doing one. All you need is a T50 torx socket. You remove the top four cleats front and back. Attach the brackets, bolt back in and attach. Instructions come with it as well are on the RidgelineStore.com. Thanks for watching.
QUESTION : I am purchasing a new 2022 RTL-E with the OEM hard folding tonneau. Would 4 Ridgeline tires fit in the bed and you could still completely close that tonneau ?
I bought a new 2018 Ridgeline and had the dealer install the Tonneau Cover. It always leaks water. Called the dealer and was told it is not waterproof/leakproof. Today I noticed light in both forward corners. They may be drain holes. Thinking about caulking them. Do you have a better solution?
Just make soured it is pushed forward, so tabs are touching brackets. To not over tighten front brackets. You may get a little water but should run down can wall and exit base. Let me know. Key is don’t over tighten. If your high pressure car washing, you may get leakage. It’s not water proof but I never had any issue.
Hi, thank for the great video. I purchased a new Ridgeline. It did not come with a Tonneau cover. I’m considering purchasing a factory oem cover from someone else who just bought a Ridgeline 2 months ago and doesn’t want the cover. What do I need to remove the factory mounting plates/bolts and re-install on my new truck ? Thank you !
I bought my 2018 Ridgeline in 2020 and my cover leaks. Thanks for the video on taking the cover off. I have to take mine off for the first time and this was a huge help.
Mine never leaked. I have heard many do but remember they are weather resistant not weather proof. Maybe reseating (remove and replace) will help a little better. Remember not to over tighten the front clamps. Thanks for watching.
There was a stop sale but now they have updated the ones selling now. If you get one and the straps are not there, you just take to your local Honda Dealer and they will modify like they did mine. If watch my other video, I got the recall done a couple weeks ago. ruclips.net/video/7J4j5Ns7bAY/видео.html
I’ve heard both. Mine never had the issue. I would loosen the front clamps. Make sure the front stops are flush and refasten. It maybe too tight up front collapsing the seal. Let me know.
I check the Ridgeline store you said in the video but it is out of stock. Do you happen to have a distributor here in Canada wherein I could get this very same model. Hoping to hear rom you soon. Thank you! Just subbed by the way! Also, we have a 2021 Honda Ridgeline Exl. Thanks again!
Thanks for watching and subscribing. Apologies but Honda is having issues fulfilling the bed cover right now. Also we do not ship to Canada. It’s a Honda thing. You will have to shop in Canada. I do also recommend the Backflip 2 if you can not locate a Honda Bed Cover. Have a great day!
I have a few questions regarding these tonneau covers. 1. Will water collect and create rust under your side composite bed pieces (that you removed)? 2. My tonneau leaks water in the back by the rear windshield. Is it possible the flap on the rear isn’t in the correct place? Should it be tucked in or let out?
1. No - it’s all painted. 2. Just make sure you have it slid all the way towards the cab, and hand tighten the front clamps - good and snug. You can also crawl in there (use a friend) close everything up and look for light leaks.
It appears to me that your Tonneau Cover is not installed correctly and will probably leak more than it should as a result. I say that after purchasing the OEM Tonneau Cover for my 2022 Ridgeline and having a difficult time installing it myself. The issue is apparent when I look at your video from about the 3:12 - 3:35 section. You have placed the brackets coming down from the cover BEHIND the front brackets that are mounted to the bed. This does not allow the front gasket to mate with the top of the bed liner as it should. The installation sheet for the product shows the brackets coming down from the cover to be installed BETWEEN the front of the bracket which is mounted to the pickup bed and the front, inside edge of the pickup bed. In other words, the cover should be mounted approximately 1/2 inch more toward the front of the vehicle, at least that's the way it appears to me. However, I am unable to get mine to go into that slim space due to there is a rubber cap on the end of the bracket that is too fat and prevents the cover from seating all the way down. When I try to pry off the rubber cap it appears to be glued in place so I am not sure if the rubber cap should remain in place or if it was just put there for protection during shipment. As it is a Saturday I drank a few cool ones while pondering my dilemma and decided to postpone the installation until early next week after hopefully getting tech support clarification from Honda. There are rubber caps on the pieces that secure the sides at the front as well and I am not clear on whether they need to be removed or not as they pry right off. What appeared to be an easy installation that should take maybe 20 minutes tops has turned into a puzzle for me. Maybe I'm overthinking it but I have a new truck and I want to be confident I've installed it correctly. I imagine I could force the brackets into place with the rubber covers still on but then it would be more difficult to remove the cover it I ever wanted to remove it completely. Can you please take a look at yours and see if what I say here makes any sense as I may not be explaining what I'm seeing very well and heck, I may be overlooking something very simple. Thanks in advance.
Great video, thanks. I had a 2017 with the OEM Bed Tonneau cover and it worked great. Bought a 2020 Ridgeline and had the OEM Tonneau installed and it leaks like a sieve around the panels and across the bed. The Dealer said it's not covered under warranty as some covers leak and some don't . Called Honda corporate and felt like I was being scolded for calling and the tonneau is not water tight
Yes it does - but everyone is sold out. Honda is unable to fulfill right now. Join the newsletter on the site and I’ll send out an email blast when back in stock. Thanks for watching.
@@CampingRandy Thanks for taking the time to respond. That is not what I was trying to ask, but helpful. I’ll try to ask in a different way. If the tonneau is folded up, in the open position, what is the distance from the tonneau to the tailgate. I’m trying to figure out if I can put a mountain bike on a tailgate pad without removing the tonneau from the vehicle. Thanks.
I no longer have a bedcover but it’s in thirds. Take the length and divide by three. That will give you the part of the bed still covered by the bed cover. Let me know if you have additional questions. Glad to help!
Yes - if you install the locking tailgate Honda accessory we sell on the Ridgeline Store. If you have a 2020 or 2021, you have a factory tailgate lock!
I just had one installed on my ridgeline today and this is the first video in my feed. Random...nope Google is at it again. I have not searched tonneau covers in over a week. Video was exactly what I needed to see and I have been wondering how to take the caps off. A nice bonus.
@@CampingRandy do you recommend any particular type of running rails.? I have the 2021 hpd in black. Getting parts near tire well for new model is tough.
@@CampingRandy good point. The main challenge is that i have to park in a small parking lot for work with state employees who don’t give a crap about the car next to them when they open the door. I believe step rails are able to protect the doors from getting hit some of the time. Ground clearance is a small issue for me but good to know.
Great instructional video! Can the tonneau be folded up against the window to provide for complete bed usage or do you have to remove the tonneau if you need the room covered by the last panel?
Sorry no - I had the BACKFLIP brand on my gen 1 and it did cover the back window. Their gen 2 design does as well, just not the Honda brand. bakflip.com/v/honda/ridgeline/2019/
Traxda is working on a bumper, I have another developer trying to do sliders. It’s difficult as the RIDGELINE has “empty” space from the “frame” out to the doors. There are swing arms out there that install into the receiver. Without a bed cover, your off-road spare will fit in the bed mount hole area against the cab. Hope this helps.
Apologies- I thought it was a statement not a question. Yes you can open 100% with the trifold open. But it’s more like 85% with the bed cover closed. Does that answer it.
Oh yes - you can open the trunk fine and access easy. It opens up all the till it touches the bed cover. I use it all the time with out issue. If you need a little more room, you just flip the cover back one. We will get a video made on that. Thanks for watching!!’
@@CampingRandy great thanks. Just bought a 2021 white black edition. With cover and wasn't sure if it would be functional with cover. Will have it in a week. Thanks
@@short5stick LUCKY YOU!!!! Sends some pics of that beast!! So I can share on the GRAM @campingrandy. Your gonna love it!! Now go get some MEATY TIRES!
Hi Randy, I was lucky enough to get one from you recently. Question...in the instructions is says not to reuse the tie down cleats (rear). You have them re-installed. Did you put the tonneau bracket first? Do you think there is any issue reinstalling them, really?
I just got a RL with the cover factory installed, it doesn't have upper rear cleats either. I'm going to try to get the cleats from the dealer so I can add them back, but I can't tell what kind of tool is needed for the bolts that hold it in place. Is it a proprietary driver bit that came with the cover?
I hope you don’t mind if I watch this video a few times! I’m getting mine installed Friday! I looked all over for this video on the OEM model! 🙏
Let me know if you have any questions! Thanks for watching.
Works like a Champ! No complaints, had the Dealer install, and demonstrate operation. Glad I got it. No need for a drain.
Your videos are great-very informative and enjoyable! Thank you!
Thanks for watching. I’m glad they help!!
Thank you much appreciated
Thanks! ❤
You're welcome 😊
What year Ridgeline are showing in this video? Also, if one purchases this cover, will the in bed trunk lid open fully?
2019, 2016 to 2023 have all the same beds. I have another video showing how far the trunk opens with a bed cover. ruclips.net/video/M55W_ApHTys/видео.html
thanks for the video. i can't tell what the materials are like, do you think it would be possible to drill into it to add a couple tie downs points? I wouldn't use them for anything crazy heavy. most likely couple pairs of skis or an inflatable paddleboard or two during. memorial day trips the two seasons overlap and i take both with plus camping gear for 4 people. so i'm looking to add the option for storage on top of a tri fold cover for those seldom times the covered bed isn't enough
It’s a metal exit or with foam core.
Does the cover come with those cleats that the handles appear to lock into? In my truck all I see are the tie down points.
Yes - the bed cover comes with all hardware that replaces your top cleats.
I see you kept the top tiedowns at the tailgate. I don't understand why the instructions say to remove them. Did you get longer torx bolts or just reuse the originals?
I don’t know either. There are plenty of threads.
Just got a 2023 Ridgeline . I think I’ll be watching a lot of your videos !!
Thanks greatly appreciate it. Checkout the store www.CampingRandy.com
Will the Honda Bed Extender work with this Tonneau?
Yes it will
I have the 2019 Ridgeline. I want to get the OEM cover but I also want to get the Ridgeline tent. If I get the Backflip cover instead, do you think I could set up the tent without removing cover since it folds up against the rear window?
I think you could!
@@CampingRandy Thanks
are the rear cover hold downs as cheap and loose as they appear? can you get or put screw down ones like in the front in the back??
Mine is not water-tight, due to the four gaps in the bed liner at the cab.
Weather Resistant
Nice video! I'm looking for a tonneau for my 2021 RL. Do you have a review on this Honda? Can it carry any load on top? Or will it support a person standing on it? Have been looking at the more expensive Diamondbacks, which support either 400(SE) lbs or 1600 lbs(HD), but this one seems easier to install and remove. And less expensive.
I think this would be a much better video if it started with the original installation. The video is well made but I would like to see the installation from the start.
Sorry I sold mine and now regret not doing one. All you need is a T50 torx socket. You remove the top four cleats front and back. Attach the brackets, bolt back in and attach. Instructions come with it as well are on the RidgelineStore.com. Thanks for watching.
@@CampingRandy how can the owner of the ridgeline store not have a ridgeline?? :)
I HAVE A RIDGELINE. I don’t have a bed cover anymore.
@@CampingRandy ohhhh, why did ya sell the cover?
To test a bedrack system as well Roof top tent.
About time you made another video. 😀
Lololooooooopoolllloolol - yes my love!
QUESTION : I am purchasing a new 2022 RTL-E with the OEM hard folding tonneau. Would 4 Ridgeline tires fit in the bed and you could still completely close that tonneau ?
No
I bought a new 2018 Ridgeline and had the dealer install the Tonneau Cover. It always leaks water. Called the dealer and was told it is not waterproof/leakproof. Today I noticed light in both forward corners. They may be drain holes. Thinking about caulking them. Do you have a better solution?
Just make soured it is pushed forward, so tabs are touching brackets. To not over tighten front brackets. You may get a little water but should run down can wall and exit base. Let me know. Key is don’t over tighten. If your high pressure car washing, you may get leakage. It’s not water proof but I never had any issue.
Hi, thank for the great video. I purchased a new Ridgeline. It did not come with a Tonneau cover. I’m considering purchasing a factory oem cover from someone else who just bought a Ridgeline 2 months ago and doesn’t want the cover. What do I need to remove the factory mounting plates/bolts and re-install on my new truck ? Thank you !
T50 torx socket. Go to Ridgeline Store and down load the HOW TO instructions. Thanks for watching
I bought my 2018 Ridgeline in 2020 and my cover leaks. Thanks for the video on taking the cover off. I have to take mine off for the first time and this was a huge help.
Mine never leaked. I have heard many do but remember they are weather resistant not weather proof. Maybe reseating (remove and replace) will help a little better. Remember not to over tighten the front clamps. Thanks for watching.
Is this the model that the recall was fixed on cause I have a 2020 and would like to purchase this cover for my wife's ridgeline?
There was a stop sale but now they have updated the ones selling now. If you get one and the straps are not there, you just take to your local Honda Dealer and they will modify like they did mine. If watch my other video, I got the recall done a couple weeks ago. ruclips.net/video/7J4j5Ns7bAY/видео.html
Hi Randy one question I have the same cover as you have for my 2019 every time I took to the car wash always water in there is that normal.
I’ve heard both. Mine never had the issue. I would loosen the front clamps. Make sure the front stops are flush and refasten. It maybe too tight up front collapsing the seal. Let me know.
I check the Ridgeline store you said in the video but it is out of stock. Do you happen to have a distributor here in Canada wherein I could get this very same model. Hoping to hear rom you soon. Thank you! Just subbed by the way! Also, we have a 2021 Honda Ridgeline Exl. Thanks again!
Thanks for watching and subscribing. Apologies but Honda is having issues fulfilling the bed cover right now. Also we do not ship to Canada. It’s a Honda thing. You will have to shop in Canada. I do also recommend the Backflip 2 if you can not locate a Honda Bed Cover. Have a great day!
@@CampingRandy Is the Backflip 2 a Canadian base store?
No it’s based USA, but they may ship to Canada.
Did you put a rack on the Honda Ridgeline along with the Honda cover? If so what rack? Thanks
Development under way. The HOBBS mid-rack with bed cover extensions is coming in two weeks. VIDEO COMING. So EXCITED!!!!
I have a few questions regarding these tonneau covers.
1. Will water collect and create rust under your side composite bed pieces (that you removed)?
2. My tonneau leaks water in the back by the rear windshield. Is it possible the flap on the rear isn’t in the correct place? Should it be tucked in or let out?
1. No - it’s all painted.
2. Just make sure you have it slid all the way towards the cab, and hand tighten the front clamps - good and snug. You can also crawl in there (use a friend) close everything up and look for light leaks.
It appears to me that your Tonneau Cover is not installed correctly and will probably leak more than it should as a result. I say that after purchasing the OEM Tonneau Cover for my 2022 Ridgeline and having a difficult time installing it myself. The issue is apparent when I look at your video from about the 3:12 - 3:35 section. You have placed the brackets coming down from the cover BEHIND the front brackets that are mounted to the bed. This does not allow the front gasket to mate with the top of the bed liner as it should. The installation sheet for the product shows the brackets coming down from the cover to be installed BETWEEN the front of the bracket which is mounted to the pickup bed and the front, inside edge of the pickup bed. In other words, the cover should be mounted approximately 1/2 inch more toward the front of the vehicle, at least that's the way it appears to me. However, I am unable to get mine to go into that slim space due to there is a rubber cap on the end of the bracket that is too fat and prevents the cover from seating all the way down. When I try to pry off the rubber cap it appears to be glued in place so I am not sure if the rubber cap should remain in place or if it was just put there for protection during shipment. As it is a Saturday I drank a few cool ones while pondering my dilemma and decided to postpone the installation until early next week after hopefully getting tech support clarification from Honda. There are rubber caps on the pieces that secure the sides at the front as well and I am not clear on whether they need to be removed or not as they pry right off. What appeared to be an easy installation that should take maybe 20 minutes tops has turned into a puzzle for me. Maybe I'm overthinking it but I have a new truck and I want to be confident I've installed it correctly. I imagine I could force the brackets into place with the rubber covers still on but then it would be more difficult to remove the cover it I ever wanted to remove it completely. Can you please take a look at yours and see if what I say here makes any sense as I may not be explaining what I'm seeing very well and heck, I may be overlooking something very simple. Thanks in advance.
Disregard. I was misreading the drawing in the instructions. Yours seems to be correctly installed. My bad.
Understood
Are you showing the newer version or the tonneau cover and bracket attachments? Or is this the one they recalled?
Not in this video - it’s in this one ruclips.net/video/7J4j5Ns7bAY/видео.html
Great video, thanks. I had a 2017 with the OEM Bed Tonneau cover and it worked great. Bought a 2020 Ridgeline and had the OEM Tonneau installed and it leaks like a sieve around the panels and across the bed. The Dealer said it's not covered under warranty as some covers leak and some don't . Called Honda corporate and felt like I was being scolded for calling and the tonneau is not water tight
Wow - that sucks. Thanks for watching.
I have a 2021 ridgeline coming will this cover fit mine? This is oem cover.. your website says sold out.. getting anymore in?
I think there is something going on with supply, due to the recall.
I just bought one today from Honda. I was able to get the price down a little to normal market $900
@@CampingRandy does the OEM cover on your site fit 2017 - 2021?
Yes it does - but everyone is sold out. Honda is unable to fulfill right now. Join the newsletter on the site and I’ll send out an email blast when back in stock. Thanks for watching.
Thank you for making this video. It helped me a lot
Great to hear!!! Thanks for watching.
It is not water tight. But it is a nice cover.
Mine was.
Do you know what the length is from the tailgate to the tonneau if the tonneau is opened but still on the vehicle?
I’m a little confused on the question. Check this video out. I think this is what your asking. ruclips.net/video/M55W_ApHTys/видео.html
@@CampingRandy Thanks for taking the time to respond. That is not what I was trying to ask, but helpful. I’ll try to ask in a different way. If the tonneau is folded up, in the open position, what is the distance from the tonneau to the tailgate. I’m trying to figure out if I can put a mountain bike on a tailgate pad without removing the tonneau from the vehicle. Thanks.
I no longer have a bedcover but it’s in thirds. Take the length and divide by three. That will give you the part of the bed still covered by the bed cover. Let me know if you have additional questions. Glad to help!
Does it lock and keep it's secure
Yes - if you install the locking tailgate Honda accessory we sell on the Ridgeline Store. If you have a 2020 or 2021, you have a factory tailgate lock!
Is there a way to put a rack on for a rooftop tent that will still allow for use of the tonneau cover?
In the process of developing!!!!
Anyone considering a softtopper and roof rack option?
I have a few friends who have soft toppers but unsure if they are sturdy enough for a roof rack.
@U Betcha I am so doing it!!!!!!
I just had one installed on my ridgeline today and this is the first video in my feed. Random...nope Google is at it again. I have not searched tonneau covers in over a week. Video was exactly what I needed to see and I have been wondering how to take the caps off. A nice bonus.
Awesome - glad to help!!!!
@@CampingRandy do you recommend any particular type of running rails.? I have the 2021 hpd in black. Getting parts near tire well for new model is tough.
Are you speaking of step rails. I’m not a fan due to they hit the back of my legs as we’ll decrease ground clearance.
@@CampingRandy good point. The main challenge is that i have to park in a small parking lot for work with state employees who don’t give a crap about the car next to them when they open the door. I believe step rails are able to protect the doors from getting hit some of the time. Ground clearance is a small issue for me but good to know.
Honda does make side moldings as an accessory.
Great instructional video! Can the tonneau be folded up against the window to provide for complete bed usage or do you have to remove the tonneau if you need the room covered by the last panel?
Sorry no - I had the BACKFLIP brand on my gen 1 and it did cover the back window. Their gen 2 design does as well, just not the Honda brand. bakflip.com/v/honda/ridgeline/2019/
Yes he is
Um …. Ok
Awesome!! TY!!
Thank you!
thank you for sharing! there are few things on Ridgelines this is very helpful
Enjoy! Let me know what other videos you would like to see!
@@CampingRandy truly interested by rock rails, bumpers specifically back bumper with swag for a real size spare... ;)
Traxda is working on a bumper, I have another developer trying to do sliders. It’s difficult as the RIDGELINE has “empty” space from the “frame” out to the doors. There are swing arms out there that install into the receiver. Without a bed cover, your off-road spare will fit in the bed mount hole area against the cab. Hope this helps.
@@CampingRandy thank you so much for the detail responses, truly appreciate it ✌️
Very welcome! Thanks for watching!
I know the in-bed trunk will only open about 75% with the tonneau cover on, but with the first tri-fold up will the trunk open all the way?
YOU ARE CORRECT SIR! Thanks for watching!
@@CampingRandy I’m not sure I understand your answer. Do you mean yes it will open all the way?
Apologies- I thought it was a statement not a question. Yes you can open 100% with the trifold open. But it’s more like 85% with the bed cover closed. Does that answer it.
@@CampingRandy Yes. Thank you very much. That function is important to me and none of the covers I’ve looked at address it.
With the top on do a video on how far you can open the trunk in the bed and is it still usable.
Oh yes - you can open the trunk fine and access easy. It opens up all the till it touches the bed cover. I use it all the time with out issue. If you need a little more room, you just flip the cover back one. We will get a video made on that. Thanks for watching!!’
@@CampingRandy great thanks. Just bought a 2021 white black edition. With cover and wasn't sure if it would be functional with cover. Will have it in a week. Thanks
@@short5stick LUCKY YOU!!!! Sends some pics of that beast!! So I can share on the GRAM @campingrandy. Your gonna love it!! Now go get some MEATY TIRES!
How do I post pictures to show exactly what I'm trying to describe insofar as my ideas on why I think your cover is installed incorrectly?
You can send the to me on Instagram at @campingrandy or email to support@ridgelinestore.com
Hi Randy, I was lucky enough to get one from you recently. Question...in the instructions is says not to reuse the tie down cleats (rear). You have them re-installed. Did you put the tonneau bracket first? Do you think there is any issue reinstalling them, really?
There’s no issue. You have plenty of threads on the bolts to adhere. Put the bed cover bracket first, then clear, then bolt. ENJOY!!!!
I just got a RL with the cover factory installed, it doesn't have upper rear cleats either. I'm going to try to get the cleats from the dealer so I can add them back, but I can't tell what kind of tool is needed for the bolts that hold it in place. Is it a proprietary driver bit that came with the cover?
T50 socket! ridgelinestore.com/T50-Torx-Socket-Remove-Honda-Ridgeline-Bed-Cleats-p416298723
We sell them. ridgelinestore.com/Honda-Ridgeline-Cleats-Tiedowns-p416575540
hi, Nice vid. thank you. couple questions. How is the seal (seal against rain water)? Does the bed get wet when rain?
Works great! Triple seal keeps the bed dry!!
... even in high pressure car washes!!!
Just put one on 2021 this afternoon ran it though car wash floor about 75%wet.rain might not be as bad.
Sorry to hear. No issues in the two years I have had mine.