I can tell you how much it uses on any setting... the pump is a 0.022ml pump. At 1.7hz it is 0.022ml x 1.7 hz x60 seconds x 60 minutes = 134ml per hour 1000ml/134ml = 7 hours 30 minutes... At 5.5hz it is 0.022ml x 5.5 hz x60 seconds x 60 minutes = 435ml per hour 1000ml/435ml = 2 hours 20 minutes...
Awesome Videos and info Deano....Keep em coming braavaaaaaa.....I been kicked off RUclips for two weeks, got another strike so I can,t put any vids out...bLOODY jOKE MATe Did,nt even say anything bad...Ahhh Well Fook em...Respect Braavaaaa...
Yes i know about the manufacturers hidden settings, I personally don't have any issues with the way my heater is running so i find there's no need to mess with them.
Im not sure because i wasnt really monitoring the room temperature but what i can say is watching the video back that when the heater started the temperature according to the heater was 7C, After one hours running it then showed 16C, After 2 hours 18C and after 5 hours it was 22C........ After that i dont know but i cant imagine the temperature going up much more because my building is uninsulated. Hope this helps.
Please test howuch fuel it takes on full power. I have the same. I found out u can better run it full power. Its uses more fuel than the low setting but only a tiny tiny tiny bit more. But on full u get more heat faster.
Thank you for sharing. I'll put some 1 liter marks on mine immediately - that trick of yours will make it easy to know how much fuel there's left!
Thanks for watching.....
I use one in my off grid garage build it was that good I put one on my conservatory there great 👍 great video Deano
Thanks for that Steve.
The only way that measurement isn't accurate is if the government/ gas stations are shorting us at the pumps! That would never happen would it lol
Thanks Deano for the excellent video!
Glad you enjoyed it
Great video
Thanks!
I can tell you how much it uses on any setting...
the pump is a 0.022ml pump.
At 1.7hz it is 0.022ml x 1.7 hz x60 seconds x 60 minutes = 134ml per hour
1000ml/134ml = 7 hours 30 minutes...
At 5.5hz it is 0.022ml x 5.5 hz x60 seconds x 60 minutes = 435ml per hour
1000ml/435ml = 2 hours 20 minutes...
Thats the science behind it but there's nothing better than doing the practical
I was going to write exactly the same thing. Once you know how much 1 click of the pump uses, then it's just mathematics.
I do both. ;) @@dodgydino62 👍
Awesome Videos and info Deano....Keep em coming braavaaaaaa.....I been kicked off RUclips for two weeks, got another strike so I can,t put any vids out...bLOODY jOKE MATe Did,nt even say anything bad...Ahhh Well Fook em...Respect Braavaaaa...
Cheer bud, Youll soon be back.
Do you know about the manufacturer 1688 code where you can get into the software that the ECU runs off and you can change that
Yes i know about the manufacturers hidden settings, I personally don't have any issues with the way my heater is running so i find there's no need to mess with them.
Need to know the temperature or the room on the eight hour one
Im not sure because i wasnt really monitoring the room temperature but what i can say is watching the video back that when the heater started the temperature according to the heater was 7C, After one hours running it then showed 16C, After 2 hours 18C and after 5 hours it was 22C........ After that i dont know but i cant imagine the temperature going up much more because my building is uninsulated.
Hope this helps.
Please test howuch fuel it takes on full power. I have the same. I found out u can better run it full power. Its uses more fuel than the low setting but only a tiny tiny tiny bit more. But on full u get more heat faster.
I dont know if you've watched the full video but I have covered what you're asking
@@dodgydino62 I was about to say the same thing. You were very thorough. Thank you
Cheers Bob
How much does the fuel cost mate
Hey up Craig, I've recently brought kerosene at 85p ltr but the price tends to fluctuate.... thats from stodards in cheadle.
I've got a so-called 8kw Hcalory heater and it is more like a 2kw realy..
What makes you say its more like a 2kw..... the heat output?
How many leaters in a gallon
About four and a half
4.55
3.78 Litres is 1 American gallon. 4.54 Litres is an Imperial gallon.
"Kerosene" "not keresene" unless that's some weird British spelling...
Yes you're correct...... Bit of a bad head day. I spelt it correctly on all of my other videos. Thanks for pointing it out, Ive now corrected it.
no worries. I'm not trying to be a jerk, just trying to help. love your video!@@dodgydino62
@matthewdubay6409 no offence taken, I appreciate people pointing out any errors.
Thanks for watching.