@@SciCraftame with metal detectors but they use Eddie currents to pick up metals in those and some have actual sonar as well ....when i think of Radar i think of m.a.s.h. lol....
any ideas PLEASE on how to add 2-3 random targets on the screen using radars ecuation ?( just for the code only, not for the entire project with components and stuff)
Hello and thank you a lot! What I mean is a short simulation of a radar screen that will show or not show some targets(distance, radar cross section or even received power from target) depending on the parameters introduced by the user.(also parameters of the radar range equation, antenna gain, wavelength, transmitted power, etc) So in the end there will be displayed only the targets that fulfill the formulas requirements. What do you think? Thank you a lot ! ❤️
Yeah, I've been researching that too, aiming to create an advanced radar system. If you have any valuable information on this topic, please share. It would help me a lot. Btw thanks for the comment!
interesting that you choose to mute the actual recorded audio. This isn't radar. This is sonar, and I am willing to bet that you can hear an audible beeping form the speakers.
Hey, i built the radar right and so was the code but the board just doesnt turn on (it turns on a very low power led that indicates it is turned on but barely) and it doesnt do anything
Fantastic! I would suggest providing a link to the visualization software (rather than providing a 0.5 second image of the software title). Other than that, great work!
Ma'am, I want to attach it to a boat to detect ships or objects above and below the water. My question is, will it detect the water as well? If yes, how can I stop it from detecting the water?
Hi my friend. Thank you for the video! I want to make an Arduino radar project. Most of the radar projects using Arduino define the object with only one dimension. Whether the object is thin or thick, it draws the entire length on the radar monitor. Is it possible to make a multi-point radar project using Arduino? That is, I will be able to see the size of the object. For example, if there is a box in front of it, I will see it in width and length.
Yeah, most Arduino radar setups, like mine, only measure distance at one point, so they can't show the full size or shape of an object. To get that multi-point radar effect, you'd need more sensors or use something like LIDAR, which scans across the object and gives you more detailed info. It’s definitely possible but would require more complex hardware
would there be a way to do this without using the servo motor? like i get it won't be able to rotate and have a wider span, but can it do the same thing without needing to rotate?
Yeah, why not? Everything is possible, but it will need a different code. Just subscribe to my channel, and I might upload it there. If it's ready, I can personally give you the code
You don’t have to link anything basically there are two codes - one for Arduino Uno and the other for graphical representation. To upload the code to the Arduino board, you'll need Arduino IDE. And for the graphical representation, you'll need Processing software
So, there are two codes - one for Arduino Uno and the other for graphical representation. To upload the code to the Arduino board, you'll need Arduino IDE. And for the graphical representation, you'll need Processing software
yes, replace this line of code For a range of 2 meters: distance = duration * 0.034 / 2; For a range of 1 meter: distance = duration * 0.017; // Since we want the direct one-way distance,
Bro my servo motor is not rotating but vibrating and it's showing red in radar when there is no object also pls tell fast only few days for the tec fair
Actually, this problem also happened to me while making this project. After trying everything possible, I came to realize that my ultrasonic sensor was faulty. After replacing it with a new sensor, then everything is working fine
To resolve the issue, I'll need pictures of the setup and the error. You can easily reach me at scicraft90@gmail.com or connect with me on Instagram using the handle instagram.com/scicraft9. we can work together to solve this problem.
This happens when you try to send an Arduino code to a board. In this case, it is because Processing must be running therefore its using the port. So if you get this message, remember to stop the Processing code before you send the code in Arduino.
This happens when you try to send an Arduino code to a board. In this case, it is because Processing must be running therefore its using the port. So if you get this message, remember to stop the Processing code before you send the code in Arduino. Hope it helps.
@@SciCraft i don't know if you will see this but im wondering what you mean with a voltage issue? in what way? does the servo get to little voltage or what do you mean with voltage issue?
Make sure your power supply is strong enough to handle the servo motor. The SG-90 servo usually needs about 500mA to 1A at 5V to work properly. If your power supply isn’t up to the task, it might slow down the servo. Also, check the jumper wires sometimes, a loose or poorly connected wire can cause issues. Make sure all connections are secure and properly seated.
i hope u still read this comment,i did everything the same way and i got it to work and it working fine but very very slow and the radar would stop working like after 10 sec can u help me pls T-T
It sounds like the issue might be related to the timing or power supply. First, check if the power is consistent and sufficient for the radar and servo. Also, try reducing the delay in the code between radar readings, as a high delay might be causing the slowdown and stopping after 10 seconds. Let me know if that helps!
@@CrimsonRoseBDO bayağı bir uğraştım ama radar görüntüsü var servo hareket ediyor fakat yesil ve kırmızı göstergeler yok onlarda kodda integerler fakat hata alıyorum hala.
@@AwesomeArnav-ex5li I need to see some video of the issue so I can understand exactly what's happening. You can share the videos with me through my Gmail at scicraft90@gmail.com
Well it may 'technically' be a SONAR, but.... I think focusing on that fails to recognise the really good video. It takes ages to produce quality videos. Who gives a shizzle whether it's radio waves or sound waves (Yo' momma??).... exactly! The process is the same anyway! If you'd said "Build your own SONAR" then some daft Next Tuesday would comment "But we don't all live in submarines". Great video, keep the faith!!!
It’s a sonar because the ultrasonic sensor uses sound waves to measure distance and locate the object and Radar uses radio waves to detect and locate objects but sorry to mention it as radar because most people think it is radar and search this project as how to make radar using Arduino so that's why
🥺💬 I think SciLab release code with examples of many application, I used to work with MatLab, SciLab, and scientific program there is more application from location-based. Radar is not applicable for detecting objects only but the information you can align the shape of the object and tell about how objects are related on reflection information and is it possible with assumption. Radar can help the investigation to evidence for investigation or attachment more than catch the flying bird only.
Thanks for sharing! Really appreciate.🥰
Thank you so much for the Super Thanks! Your support truly touches my heart and boosts my confidence to keep creating great content
Watched many videos, but your explanation made everything clear. Thank you so much! Love from Pakistan
Always Welcome 🙏
tried it and worked completly fine
What should I do as the connection are loose
Broo what kind of library should be use bro ?
Thank you so much! Without this video i wouldnt be able to make one, i finally coded it and it works perfectly!
Glad you got it working!
greatest of all timeeeeeeeeeeee
Thanks bro❤️
Bro my motor is not rotating what is the problem
100% love the luxury breadboard.
Sonar. Radar uses radio, not sound.
Yes,you are right bro
But most people of the think it is a radar
T.v. antennas used to tell me when someone was walking up to my door lol...
@@SciCraftame with metal detectors but they use Eddie currents to pick up metals in those and some have actual sonar as well ....when i think of Radar i think of m.a.s.h. lol....
@@SciCraftnot if you use the word sonar they wouldn't.
100% working bro 10 times worked no problems
Great 👍
Nice video shot, thank you for sharing it, keep it up :)
any ideas PLEASE on how to add 2-3 random targets on the screen using radars ecuation ?( just for the code only, not for the entire project with components and stuff)
can you explain that to me a little?
Hello and thank you a lot! What I mean is a short simulation of a radar screen that will show or not show some targets(distance, radar cross section or even received power from target) depending on the parameters introduced by the user.(also parameters of the radar range equation, antenna gain, wavelength, transmitted power, etc) So in the end there will be displayed only the targets that fulfill the formulas requirements. What do you think? Thank you a lot ! ❤️
Can you email me this with a straightforward and clear explanation? My Gmail is scicraft90@gmail.com
Thank you! It worked!
Glad it helped!
Id be interested to see something like this upscaled for more advanced radar such as doppler. Navigational doppler radar would be neat.
Yeah, I've been researching that too, aiming to create an advanced radar system. If you have any valuable information on this topic, please share. It would help me a lot. Btw thanks for the comment!
interesting that you choose to mute the actual recorded audio. This isn't radar. This is sonar, and I am willing to bet that you can hear an audible beeping form the speakers.
Yes bro this is a sonar, I had also mentioned in the video
How to make a 360° one ?
Select the appropriate servo and do changes in radar code.
Hi, it was an interesting project.
I just had one question, if I wanted to shine a laser light on an obstacle when the radar detects it
How will the code changes?
i have a proble @SciCraft. when i change my COM from 5 to 3 it says : RuntimeException: Error opening serial port COM3: Port busy
nvm. fixed it
@JohnLindberg-w6d How did you fix it? I have the same problem with mine
My sensor is moving slowly. What seems to be the problem?
My olso
Hey, i built the radar right and so was the code but the board just doesnt turn on (it turns on a very low power led that indicates it is turned on but barely) and it doesnt do anything
instagram.com/scicraft9/ - This is my instagram ID , DM me!
Im sorry, i figured it out. Turns out the port on my pc didns supply enough power.@@SciCraft
How can i use the data from the ultrasonic and make it in use not just displaying it
How do you want to use it??
my radar is showing everything red but there is no object can you help me please
instagram.com/scicraft9/ - This is my instagram ID , DM me
My sensor shows a full red board and moves super slowly and the rotor is not moving
Fantastic! I would suggest providing a link to the visualization software (rather than providing a 0.5 second image of the software title). Other than that, great work!
In the description
so how do i make it do things such as turn on a light when an object is detected or play a sound or start a countdown ?
To achieve that, you simply need to modify the code
@@SciCraft na
Hi! what type of connector are you using for the servo motor?
Can you please clarify what you are trying to say?
@@SciCraft like what type of connector are you using to connect the servo motor to the arduino? 2:33
Female-Female jumper wires
@@SciCraft Ok. Thanks!
Ma'am, I want to attach it to a boat to detect ships or objects above and below the water. My question is, will it detect the water as well? If yes, how can I stop it from detecting the water?
Hey man, i used the code you made, the ultrasonic sensor is moving slowly. Do I need a power source?
Hi how to check the port? I Cannot upload the code to Arduino..as port isnt visible..
May I ask what did you use to make the UI on the computer?
what is the processing software? what is it's name?
Its name is Processing.
Does it also work with an arduino nano?
Yep, it will work
@@SciCraft thanks
Hi my friend. Thank you for the video! I want to make an Arduino radar project. Most of the radar projects using Arduino define the object with only one dimension. Whether the object is thin or thick, it draws the entire length on the radar monitor. Is it possible to make a multi-point radar project using Arduino? That is, I will be able to see the size of the object. For example, if there is a box in front of it, I will see it in width and length.
Yeah, most Arduino radar setups, like mine, only measure distance at one point, so they can't show the full size or shape of an object. To get that multi-point radar effect, you'd need more sensors or use something like LIDAR, which scans across the object and gives you more detailed info. It’s definitely possible but would require more complex hardware
how do i make my servo go as fast as your's was cause mine is moving a bit slow
You can reach me at scicraft90@gmail.com or connect with me on Instagram using the handle instagram.com/scicraft9/
i think you should clean your breadboard once in awhile
I have a problem with the green signal thing it doesn’t move and I tried everything 😢 what shall I do
instagram.com/scicraft9/ - This is my instagram ID , DM me!
Did you find a solution ?
would there be a way to do this without using the servo motor? like i get it won't be able to rotate and have a wider span, but can it do the same thing without needing to rotate?
Yeah, why not? Everything is possible, but it will need a different code. Just subscribe to my channel, and I might upload it there. If it's ready, I can personally give you the code
@@SciCraft ok! thank you! because this will be very useful for making a prototype of something im making for a school competition.
please help how to link the arduino IDE and the processing enviroment
You don’t have to link anything basically there are two codes - one for Arduino Uno and the other for graphical representation. To upload the code to the Arduino board, you'll need Arduino IDE. And for the graphical representation, you'll need Processing software
Which program needs for code?
So, there are two codes - one for Arduino Uno and the other for graphical representation. To upload the code to the Arduino board, you'll need Arduino IDE. And for the graphical representation, you'll need Processing software
hey, can u tell me how to change the distance range to 2 meters or 1 meter
yes, replace this line of code
For a range of 2 meters:
distance = duration * 0.034 / 2;
For a range of 1 meter:
distance = duration * 0.017; // Since we want the direct one-way distance,
@@SciCraft thanks
also please send me your discord or instagram i have a doubt i will send picture
@@bhbkjujinmjnh instagram.com/scicraft9/
Im new to Arduino , Is there a way to change the Serial.print to output to USB port??
I think is solved, wrong USB port call
How to add a screen to display that radar
Actually, I'm working on this radar with a separate display, and I will upload soon. Make sure to subscribe to the channel.
Bro my servo motor is not rotating but vibrating and it's showing red in radar when there is no object also pls tell fast only few days for the tec fair
Pls 🥺 help
@@naitiksoni907 Please contact me at my Gmail: scicraft90@gmail.com. We will solve your problem together
can we classify the objects here if we can please share the updated code
My radar is showing all red even when there is no object in front of it.
Actually, this problem also happened to me while making this project. After trying everything possible, I came to realize that my ultrasonic sensor was faulty. After replacing it with a new sensor, then everything is working fine
Hello, how can I make the radar stop spinning without having to disconnect it from my PC port?
instagram.com/scicraft9/ - This is my instagram ID , DM me
use chatgpt
Will 830 point board work? In your link it says 840
Are there more than 830 connections made on the board in this design?
Does the radar need to be connected to a pc?
whats the APPS NAME WHICH PROCCESES THE RADAR
Processing Software
I'm not geeting the visual output what is the solution to that?
I am doing in Mac Book and my port is /dev/c..... what should I do
instagram.com/scicraft9/
Dm me
amazing only amazing thank you
Thank you so much 😊
hi i am geting a error (avrdude: ser_open(): can't open device "\\.\COM5": Access is denied.) what to do pls tell
It works only 3 seconds then the it shows error disabling serialEvent() for COM3 null
How can i solve it
i use chtgpt to help me to solve it
i got this code in arduino ide: Failed uploading: uploading error: exit status 1
To resolve the issue, I'll need pictures of the setup and the error. You can easily reach me at scicraft90@gmail.com or connect with me on Instagram using the handle instagram.com/scicraft9. we can work together to solve this problem.
Can you please send me the circuit diagram for this.
instagram.com/scicraft9/
Dm me
hello can we do same project using stm32, if yes can u give code for it
instagram.com/scicraft9/ - This is my instagram ID , DM me!
can i use this underwater?
I don’t think the current setup would work underwater
The detection sensor is all red.
🥺 i really need help how to add sensors gas? is it possible please helppp me
instagram.com/scicraft9/ - This is my instagram ID , DM me!
100% Woorking ❤
Hello, I encountered an error on line 47, how can I fix it?
what is the error?
I constantly get port busy or port not found what should I do?
This happens when you try to send an Arduino code to a board. In this case, it is because Processing must be running therefore its using the port. So if you get this message, remember to stop the Processing code before you send the code in Arduino.
Love the smoky bread-board and quite slow.. add an ASCI and more radar sensors (receivers)
i dont know why but when it detect something it spin faster
ı am getting errror in this part
iAngle = int(angle);
iDistance = int(distance);
The function parseİnt(String) does not exist.
how can ı fix it
I changed the faulty part as follows and set the language to English.
iAngle = parseInt(angle);
iDistance = parseInt(distance);
How to download that processing software
you have to download processing 3.0 software
How can I change duration
Which duration?
It moves slowly and the motor doesn't rotate either.
I keep getting the port busy message what to do?
This happens when you try to send an Arduino code to a board. In this case, it is because Processing must be running therefore its using the port. So if you get this message, remember to stop the Processing code before you send the code in Arduino.
Hope it helps.
my radar isnt moving... im not sure whats wrong
Even me
sir it is not working for me !! it is not showing any errors in code but while uploading it is showing error
What is the error?
@@SciCraft Sorry to bother you sir it is perfectly working now and thank you your time and response.
I'm glad it worked!
life saverrrrrr
I want best processing app link plss...... 🙆
Isn't this actually a sonar?
PLEASE HELP ME MY SERVOP IS NOT TURNING PROPERLY MY EXIBITION IS ON 9TH PLEASEE TELL HOW TO SOLVE THIS
Is correctly installed?
Please send me images or a video of your current setup to my Gmail at scicraft90@gmail.com
How to add serial port
instagram.com/scicraft9/ - This is my instagram ID , DM me
why is mine moving really slow
It's a voltage issue
@@SciCraft i don't know if you will see this but im wondering what you mean with a voltage issue? in what way? does the servo get to little voltage or what do you mean with voltage issue?
Make sure your power supply is strong enough to handle the servo motor. The SG-90 servo usually needs about 500mA to 1A at 5V to work properly. If your power supply isn’t up to the task, it might slow down the servo. Also, check the jumper wires sometimes, a loose or poorly connected wire can cause issues. Make sure all connections are secure and properly seated.
@@SciCraft thanks, i will try to fix it👍
i hope u still read this comment,i did everything the same way and i got it to work and it working fine but very very slow and the radar would stop working like after 10 sec can u help me pls T-T
It sounds like the issue might be related to the timing or power supply. First, check if the power is consistent and sufficient for the radar and servo. Also, try reducing the delay in the code between radar readings, as a high delay might be causing the slowdown and stopping after 10 seconds. Let me know if that helps!
The parseInt(String) function does not exist.
Gives a fault
In the code ?
instagram.com/scicraft9?igshid=MzRlODBiNWFlZA== dm me on instagram
@@SciCraft 47 and 48 processing
@@taylancelik8372 Same problem here. Did you solve the problem. Sorunu çözebildiniz mi hocam.
@@CrimsonRoseBDO bayağı bir uğraştım ama radar görüntüsü var servo hareket ediyor fakat yesil ve kırmızı göstergeler yok onlarda kodda integerler fakat hata alıyorum hala.
how far it can detect?
Upto 40cm
can't it move the reach away anymore?
@@SciCraft
Is there a way to stop the servo sensor from spinning once it detects an object?
Yes, it is possible instagram.com/scicraft9/ - This is my Instagram ID, DM me
my processing software is not working it pls help
What is the exact issue?
@@SciCraft every time i start any code it starts and after 2 mins it says not responding and it closes
@@AwesomeArnav-ex5li I need to see some video of the issue so I can understand exactly what's happening. You can share the videos with me through my Gmail at scicraft90@gmail.com
@@SciCraft the radar project you showed that is working but its not giving the out put on he processing application
did u find anything tomorrow is my competition pls help
isn't that a sonar sensor not a radar sensor
No sonar it's use for underwater only
its good project, but the circuit diagram and video is different,,
The circuit diagram is the same, but the way of connecting things might be different
Well it may 'technically' be a SONAR, but.... I think focusing on that fails to recognise the really good video. It takes ages to produce quality videos. Who gives a shizzle whether it's radio waves or sound waves (Yo' momma??).... exactly! The process is the same anyway! If you'd said "Build your own SONAR" then some daft Next Tuesday would comment "But we don't all live in submarines".
Great video, keep the faith!!!
Thank a lot man for your understanding. I truly appreciate it.
everthing works expet the servo motor it doesnt even flinch
Thanks 🤞🏽
Welcome❤️
Mine is not working you lied😢
Can u send the code please ❤
Codes:-
IDE:-drive.google.com/file/d/177iKPwRGpDglTV7PG5hAgFL8iY_Jm6EP/view?usp=share_link
Processing:- drive.google.com/file/d/1jQ9G55sKmw-xedU3e3QEJNCIltC_npbP/view?usp=drive_link
radar or sonar ?
It’s a sonar because the ultrasonic sensor uses sound waves to measure distance and locate the object and Radar uses radio waves to detect and locate objects but sorry to mention it as radar because most people think it is radar and search this project as how to make radar using Arduino so that's why
Thanks :)
Welcome!!❤️☺️
is the jumper wires a male-male or female-female?
I had used all types of jumpers.
it is getting HOT WHAT I DO?????
Is your Arduino board overheating?
@@SciCraft yeeeees!
@@SciCraft what i și wrong and
@@SciCraft is
And processing 4 i downloaded and my PC tells "app not found"
how to install processor
can you tell me
Go to this link processing.org/ and download it
bang kenapa pas di running kok not responding ya
Okay, you can Gmail me:- scicraft90@gmail.com or here is my Instagram ID:- instagram.com/scicraft9/, contact me.
🥺💬 I think SciLab release code with examples of many application, I used to work with MatLab, SciLab, and scientific program there is more application from location-based. Radar is not applicable for detecting objects only but the information you can align the shape of the object and tell about how objects are related on reflection information and is it possible with assumption. Radar can help the investigation to evidence for investigation or attachment more than catch the flying bird only.
thank you so much bro for sharing such a important infomation ❤
Can you send me processing code in the comment
instagram.com/scicraft9/
Dm me
Not working ..😊
Whats the problem?
I have to use aliexpress because im broke like that😞
hello brother I followed your step but my radar is not rotating plz help
instagram.com/scicraft9/ - This is my instagram ID , DM me
Same bro
How you did this voice
In Microsoft clipchamp video editor
How can I contact you?
This is my email - scicraft90@gmail.com