REMATCH! Stihl MS 261 CM vs Husqvarna 550 xp Mark 2 - Pro Chainsaw Comparison
HTML-код
- Опубликовано: 5 сен 2024
- The people have spoken and today is the day I'm running my Stihl MS 261 CM vs my Husqvarna 550 xp Mark 2 for a rematch. In case you missed it, catch the first video here: • Stihl MS 261 CM vs Hus... .
CHAINS USED FOR THIS TEST:
*Husqvarna X-Cut SP33G 18" Chainsaw Chain, 050 GA 72 Drive Links, Grey: amzn.to/2PjF5Mf
*Stihl Chainsaw Chain- 26RS68- 18 Inch, 68 Drive Links, .325 Pitch, .063 Gauge: amzn.to/3dqVGWm
(As an Amazon Associate, I receive a small commission on qualified purchases.)
CHECK OUT MY INDIVIDUAL REVIEWS ON THESE SAWS:
Stihl MS 261 C-M Review: • STIHL MS 261 C-M REVIE...
Husqvarna 550xp Mark II Review: • HUSQVARNA 550XP MARK I...
OTHER VIDEOS WHERE I USE THESE SAWS:
Husqvarna 550xp Playlist: • Husqvarna 550xp Mark 2
Stihl MS 261 CM Playlist: • Stihl MS 261 CM
In the comments on my first Stihl 261 vs Husqvarna 550 xp mark 2 video, a lot of people said the test wasn't fair and that I should run a yellow (full chisel) chain on the MS261. My intent on that video was to run both saws as I received them from the dealers - stock. However, I have listened to the people, and today we're running the MS 261 vs 550xp Mark 2 again.
This time the Stihl ms261 will run a Stihl yellow chain while we'll keep the Husqvarna x cut chain on the 550 mark II. This should give the Stihl chainsaw a slight advantage since the yellow chain is full chisel and the xcut chain is semi chisel. (Semi chisel vs full chisel.). Let's run both of these saws side-by-side so you can see the difference for yourself!
I really like both of these chainsaws. You may have seen my reviews on them (linked below). Actually, I love the stihl ms 261 c-m and the 550xp so much, that I couldn't decide between them! That's why I have both. I coughed up my own money for both of these chainsaws, and actually, when I watched the footage and timed them, I was surprised at the result.
Thank you for watching today. If you like videos that inspire you to get outdoors and work with equipment and tools, hit the subscribe button. This is the channel for you.
Find me on social media:
Instagram: @oldschoolmillennial
Facebook: oldschoolmillennial
My Favorite Firewood Tools
Moisture Meter: rstyle.me/+L_z...
Combi Gas/Oil Can: rstyle.me/+heO...
50ft Loggers Tape: rstyle.me/+Sfd...
LogOx: amzn.to/2MBt8zy
Hard Hat: amzn.to/3CHMTdC
Chainsaw Chaps: rstyle.me/+a0T...
Husqvarna Sharpening Kit: rstyle.me/+zbE...
Oregon 620 Bench Grinder: rstyle.me/+4aK...
Firewood Bundle Bags: amzn.to/2Kr2Xe4
Kinco Gloves: amzn.to/2W8ZxCG
Bugz Goggles: amzn.to/3nAe6aY
As an Amazon Associate I receive a small commission on eligible purchases.
If you're into these 2 chainsaws, I have a playlist for each of them. Check them out here.
MS 261 Playlist: ruclips.net/p/PLJjXJCzHs0pPTSaa37K8AY7Wuo9IFp3Be
550 xp mark 2 playlist: ruclips.net/p/PLJjXJCzHs0pNnHi56lz4vKRjhHC0zWZxj
Thank you.
I’m a stihl guy but the 550xp husky is a little monster no other manufacturer makes a 50cc saw that comes close to it , that little saw is amazing
Dolmar 5105 will beat both but unfortunately they are hard to find and parts are even worse.
@@troyk3098 if it did beat both people would know about dolmar
Any one that knows professional saws does
@@troyk3098 here none mentions dolmar. I work at a Husqvarna/sthil dealer.
@@alexstromberg7696 Well that's not a good thing to admit that you work with power equipment and don't even know about some of the best German made saws around.
I bought the 550xp Mark II this morning. I just now click on RUclips & your video pops up first. Big Brother is definitely watching us! 😂
Great comparison video.
It's a good saw. Wear hearing protection cuz' it is loud.
Awesome! Enjoy your new saw! And, yes, how does Google know?! Nice Jeep, by the way. I have a '78 CJ5.
I love the split screen showing the cuts side by side. Best Comparison video format I have seen. I have the 550xp mark 1 and love it. I know lots of people had issues with the mark 1 that the mark 2 improves on, touch-wood (pardon the pun) I have been lucky and mine runs like a dream. Both Stihl and Husqy AWESOME saws and absolute leaders in the 50cc category.
youre never gonna settle this one!
I subscribed because you had the humility to take constructive criticism from your viewers. Well done, thank you.
Thanks man! Welcome!
I've both brands. They are both remarkable products. I currently use by 261 CM exclusively for falling trees. For me, its the only saw for the job.
Must not be falling very big trees
@@tylervanwormer8302 You say that as if it's a bad thing.
I never ran the Stihl, but I have the 550 XP Mark 2 & 545 Mark 2 & they are AMAZING saws
Can you even tell a difference between the 545 and 550 when using them? I was buying a 550 but my dealer talked me into the 545. He said they were both pretty much identical save for the programming in the carb. The 545 runs at slightly less rpm but still well above the torque curve. He maintained that this would actually help the life of the saw. And it was $70 less. I didn’t really care about the price difference but when it comes down to it I didn’t think I would be able to tell a difference between them in my humble homestead firewood cutting needs but would definitely appreciate any longevity there may be.
Would love to know your opinion. Thanks.
@@LuckyCharmRVing it’s not a huge difference, I can only tell if I run them back to back trying to notice a difference, the 550 definitely revs higher, & it feels a little different, but they are so close it’s nothing you would be missing out on, I really like both saws
@@vikingnorm6935 thanks for the reply. Good to know. One other thing the dealer said that I forgot was the 545 had a spring in the pull rope mechanism that made it easier to start. You notice anything there?
@@LuckyCharmRVing honestly no, they feel the same to me, they both start pretty quickly also, run great, you got a really good saw
Another thing to note is that the Husqvarna X-cut is a narrow kerf set up. I run Stihl 33RS chains exclusively on my 372xp but on a saw that uses .325 like my 346xp, the x-cut sp33g is the absolute best set up in my opinion. Of course everything is relative to the needs of the individual behind the saw in every situation.
I use 21lp on my 346 and like it
great vid, i got both. the narrow kerf skip tooth will have much less drag in the wood, for wood we use skip tooth because of that, for limbing we use full comp because they're less (grabby). i think the stihl is a bit tougher saw, like if you drop it from a tree,
and the huskie's are a bit hard starting after prolonged use but they seem to be the (go to) saws for my guys.
I have the 261 non cm and I dont regret getting it over the Husq for the sole reason I have a Stihl dealer in town and no dealer for Husq within 100 miles.
Yes, in my first video I basically said it comes down to dealer support and personal preference. Both good saws.
I have had both saws but the Stihl had an 04 light bar and full chisel chain. In the UK both the 550xp and MS261 also come with a.choice of .325 050 and 058 bar as they will run on the same sprockets. Try putting some Oregon 20LPX full chisel chain on the 550xp it will be really fast.
X cut chain ain’t no joke it’s a fast cutting chain right out the box.
Very true! One of my favorite chains out of the box!
You did it justice. I am a Stihl guy and the new 500 series husky’s are nasty machines Stihl has their work cut out for them. The husky can cut faster still yet once the chain it tuned to the saw a touch more it looked a bit jerky you might have a raker or two a touch high. It doesn’t take much.
I live in US and have an older MS 261 that has worked her little ass off every year felling, limbing and bucking. Very happy with that saw. I just ordered a light 40 bar and chain from Ireland. Can’t wait to try it! But, yeah, that 550 XP is a 50cc beast. I’d probably be very happy with that saw too, but there aren’t any Husky dealers in my area, so that wasn’t really an option.
John you gotta go with the brand where you can get support. My Southeast Husqvarna rep friend boss would tell you the same thing. When we go out and do training seminars, people ask us all the time which saw to get and that is our answer. Find out where you can most easily get service and parts and that’s the brand to pick. Given all the options, I would always recommend Husqvarna
When I bought my 550, an RS chain was put on there. You can buy still chain for Husqvarna too if you want to go head to head.
The x-cut xhain is the real deal. I I noticed right away upon using.
I picked up a new husqvarna 550 xp mark II autotune on Monday... I watched your videos along with many others... apparently there is a chainsaw and chainsaw parts shortage due to covid... I've been husqvarna guy for over 20 years but would have given the stihl 261 a try if I couldn't have got a 545 or 550 mark II autotune.... I was concerned that the 550 wouldn't measure up to my 254 that I had for over 20 years.... well it works amazing although I have only used it for a tank of gas so far my winters supply of wood is going to be delivered to me shortly.... I am excited for it's arrival and to see what this saw will do... Thanks for your videos
That's awesome! You're going to love that saw!
awesome job with the comparison...both are top notch saws but keep in mind that faster doesnt necessarily mean better but either owners of these saws should be very happy....thumbs up !!
Hello! I need detailed impressions of the 550xp mark 2 and the stihl ms 261 without the mtronic. I have to settle on one of the two. I've read quite a bit about them, but mostly initial impressions and dry information. The saw will be used primarily in the yard for cutting hardwood firewood. I will be glad if you share which of the two models is better. Which of the two models will create more joy than nerves. Which is more long-lasting and hassle-free, overall. Not primarily aimed at cutting speed. Looking for comfort and reliability on the part of the machine. To predispose to a feeling of safe and secure work, without being extreme, if you understand me. Naturally, if it contains all of these together, it's even better. 😊 Let anyone who has reasonably extended experience with the 550xp mark2 and ms261 share their extensive views on them. As well as any pressing issues to fix or recommended changes to the machine related to its optimization. Greetings!
Thanks for your comment. Have you seen my "If I Had to Choose" video? I shared which saw I would pick and why. You might find some help in the comments there, too. ruclips.net/video/4R-DNKZOhPs/видео.htmlsi=mcnBkiM_L3AEQYbg
Haha, just saw that you already commented on that one.
Stihl taking the L yet again. Can't wait to hear the excuses from the stihl fan boys.
I am a stihl guy but, own the 550. Notice the Stihl didn't bog down as much? The saws rev at different rpms. I think the torque is better on the Stihl. It all comes down to preference. Of course, I don't cut to compete so,....
yea. the stall had more heart wood to cut.🤣
I would like to see the x cut chain on the stihl, wonder if the husky would still win? I have both and i do notice the weight on the husky, may not be a bad thing as it may be built better.
Thanks for the honest comparison! I’m a solid husky fan!
You bet, man. Just trying to show the real thing.
50 gauge vs 63 gauge is irrelevant, it's the width of the cutter that makes the difference.
I’d say the only thing left to do is a longevity test on both saws. I own a 261 and I was really on the fence which saw to buy. Reason I chose the 261 was because the dealer was 10 mins from my house. That dealer is also a Husqvarna dealer but don’t sell husqvarna saws. When I asked why they said Husqvarna are junk. I’ve been seeing a lot of problems with the 550 and I was going to buy one this year but decided against it now because I don’t want to buy something that’s might not last long. I’ve even talked to that dealer and others in my area and they told me the 5 series husqvarna saws are problematic and not worth buying. Even some husky fans told me the same. They will only buy 3 series saws. I did just buy my dad a brand new 592 and that saw got a problem right out of the box. Needs to go to the dealer now to figure it out. I think their quality has gone down hill lately on what I seen on facebook groups and taking to people about them. I really hope they can get their stuff together to give Stihl some better competition. After you get a couple hundred hours on both saws make a video on what problems you had if any.
That's a good idea to do a longevity test. I've already run both saws for a few years and haven't run into any engine issues on either saw. I did have the bar stick on me a couple of times on the 550, but that might be my own fault for not greasing the bar enough.
The .50 gauge is only the drive link that rides in the groove. The links on the chisel should be 3/8" another you tuber had this issue and broke out his micrometer lol. By the way if that saw isn't strong enough it'll cut faster with the skip tooth lol. You'll be there for a month and nobody will agree.
I am in Canada, and my Ms261c came with a 20" bar (Stihl RollamaticE- Not an Light O4) .325, .50 gauge (Stihl 23 RS Pro 80( part#3690 002 0080) chain . I'm really surprised it's still not available in the USA yet.
Me too. I run a 271 Farm Boss and every stihl dealer around me has the identical chains and bars on either the 261 or 271
@@cutnshine yes and when I bought two spare chains I just told the guy at the parts counter that I wanted two 20" for my 261c thats what I got. I don't even think we can get anything different. The narrower kerf makes a big difference, cuts through dry 20" white Birch like a hot knife through warm butter. Doesn't skip a beat.
@@billybobbocephus2177 You're right. I thought I'd like to try a semi-chisel when I got mine and they can't get them. Go figure. I only cut poplar, and pine so far, but yes even though I'm running the poor man's ms261. It is definately like a light saber, hungry and strong.
@@cutnshine I kinda figured that, the full chisel stays pretty sharp even when I occasionally touch the ground with it. The two spare chains I bought haven't even been taken out of the boxes, and I still have my original chain that came on the saw with lots of life left after 20 full cords bucked into 16". I only took it off once when I hit a nail embedded in a tree that was once part of a fence line. When that happened I immediately put the spare chain on that came with the saw. Used that chain to finish the job that day then took it off and put the original chain back on and sharpened it. Excellent chain in my opinion . Wouldn't want anything else, other than maybe try a 16" bar to see the difference length makes.
PS- don't knock the 271, it's a very good saw too. Never run a Stihl before I tried my cousin's 271 and was very impressed, but I had to do an upgrade to his for bragging rights, LOL...
@@billybobbocephus2177 Awesome, I'm not knocking my 271 just respecting your original post on the 261! Wow 20 cords and counting that's phenomenal! Nice work. You have given me a new target to attempt to match. I have an 18" on mine and I also have a MS 170 16" for light limbing and pallet destruction! That's a great saw too! Take care, cut on!
Both great saws. Yet Husqvarna has held my foresters heart 💖
wow I almost read foresters as foreskin!
I just bought a 550xp mk2 this week. I bought it because I liked the feel and ergonomics vs the 261. Based on other comparisons I’ve seen between the two, with shorter bars, the 261 was usually faster. Maybe I was watching the wrong reviews. Anyway, I made the decision to buy the Husky for comfort and assumed that came at the cost of less power. I’m glad to see I may have got the best of both worlds.
I don’t think you can go wrong with either of these saws. Both pack a ton of power into the 50cc package and both have great dealer support.
I had the same opinion about the comfort and ergonomics. Seems like high reving/rpm lightweight is the current trend in saws these days.
Among others, I have a Husky 550XP Mk2. I normally use an 18” bar but occasionally run on a 15” bar. A friend has the Stihl MS261 CM, he always runs on a 16” bar, (the way the Stihl mounts the bar, that equals a 15” bar). On my Huskys, I always use .058” Oregon 21LPX, which is full chisel. He always uses the .063” Stihl RS, which is also a full chisel. Both he and I file chains round ground, so pretty much equal cutting.
Neither of us cut much softwood - both cutting mainly, oak, beech, black poplar, birch, hawthorn, blackthorn, cherry, etc. I’ve never really noticed much difference in the cut. Maybe if we were felling every hour, five days a week, there could be a difference but a few seconds here or there, it’s not a whole hill of beans. Takes more time selecting trees, posting safety signs & cordoning and clearing up. A few seconds per cut is nothing. The only real difference between the these two saw, seem to be run time on a tank. I’d say he gets perhaps 5mins. maximum more per tank, (though the 550’s tank holds 6% more) equal to a small tree and its processing. On bigger size trees, where you need a full tank or more per tree; time does not come into it. Don’t know the difference in cost, as he mixes his own fuel and I use Aspen2. I presume he’s paying far less per tank but I just prefer the alkylate fuels.
If you’ve got this far, you have my sympathy. But in short, regardless of which of these saws you choose, I can’t see you being disappointed by their performance. In the end, I think it comes down to where you can get parts. If your nearest dealer does Stihl, you buy Stihl, if they do Husqvarna, you buy Husqvarna and if they do both, you’re lucky.
I just the Stihl 261,....WOW!!! Cuts fast, its light weight,
I was giggling like a little kid!
Yeah I’ve not seen many people who use a green chain on a 261 in fact when I purchased mine it didn’t even come with a green chain, it was set up with the yellow off the shelf. Also had a 20” bar as well.
I’ve fitted an 04 bar on my 261-cm and it makes a big difference !
I've just tried it out, too. Watch out for another 261 vs 550 video coming soon.
Been using the Stihl ms181 for doing small jobs and decided to upgrade to a bigger saw was going to get the ms261 but after watching this and reading reviews decided to go for the 550xp which I picked up yesterday not used it as of yet but looks well made and very robust
So I love both chainsaw’s and I think it’s awesome that we have choices and it’s better for the consumer. The only reason I choose Stihl is because of the demographics of where I live. Living in the Pacific Northwest it is primarily Stihl dealers and shops everywhere so any kind of maintenance or replacement part is locally right where I am at.
What about ECHO CS501P? made in japan, better build quality than both stihl and husky, less money esp with 15% off dealer promo days, lightest 50cc on the market. Old school carb. no brainer for me.check it out
Not every Echo dealer participates in the dealer days promo plus its only once a year.
Ea5000p worth a look
I have and LOVE that same Husky gas / oil can. Every time I pull it our people ask where I got it. Otherwise, nice video!
I love this gas can. Thanks man!
I think something to consider is where these two saws make their max torque within the rpm range, Husky saws do cut fast when cutting cookies. I love Stihl saws but I do see the newer Husky saws produce max torque at a somewhat lower rpm than some of the newer Stihl saws. For this reason I think that is why you tend to see the smaller Husky saws cutting faster when loaded down on a decent size log. But all this said, performance isnt always everything, that 261 weighs a pound less than that Husky so over a days time you might find the Stihl wears you out less??
I have and love the 261, but this make me want to pick up a 550 xp now... nice review!
Thank you! And, yeah, I know! That's what I ended up with both. 😂
Quick question does your (or anyone elses) have a metallic rattling sound coming from clutch. I bought one last week and have run about 2 tanks through it. Just wondering if its just the way it sounds or something may be wrong from the factory
Gauge doesn't have any bearing on kerf thickness. It's just the thickness of the drivers that run down inside the bar. You can also get a stihl with a yellow chain stock, my 500i came with one. I personally think the husky is better for smaller stuff for It's higher chain speed. I think the stihl makes more torque for burying the bar. 6 one hand ,half dozen in the other. Using the same chain would be the closest comparison. Both brands are going to be set up differently from the factory. I have both and like both. 550xp,562xp,261cm,500i.
I run Stihl chain on every saw I run it just seems to be more hardend and stays sharp longer
i also own both saws and they are both great saws, but ill take my husqy everyday
I've watched all three of your 261 vs videos and I still believe the Stihl to be the better all around saw.
Great video
Yellow chain does not signify full chisel, you can get yellow semi chisel. The yellow code defines standard chain whereas green signifies low kick back, Ie, extra bumpers in front of the depth gauges.
i have a stihl 362, (20 inch bar, 3/8" chain)a 290,(18" bar, 3/8 chain) and a spanky-new husky 550 xp mk2. (18" bar, 3/8 chain) they are all great saws, similar weight and performance. What I learned from owning using these, is I like CHAINSAWS a lot, and if I could afford more chainsaws, I would buy them. The 550 XP is my newest saw, and i think husky hit it out of the park.
I think the comparisons in both tests were even handed. One point is that the Husqvarna 550XP is a more expensive saw. Also hot restart is sometimes a bit less reliable IMO.
I like both brands of saws, I don't hop up the saw , still have my old 044 stihl, 30 + year's old
I love these honest videos like this thank you for this
I am a husky guy, but find the stihl chains do not dull as fast as the husky chains. However, i do find the husky chains cut better out if the box. Just my 2 cents. Great video. Cheers.
That's an interesting observation. I have had good luck with the x cut chains keeping an edge, but it may be the wood that I'm cutting. I don't know. But I agree that it's not about a brand. Just use what works for you.
Husky chain has improved.
My 261 came with a yellow chain, the dealer lets you choose. I have both saws as well.
Which saw is more reliable on the long run, Stihl or husqvarna? I am debating between these two.
So far, they have both proven to be reliable chainsaws for me. You'll want to factor in which dealer is most available in your area.
Nice videos, I know the bar and chain you're talking about from Germany. I found it once and then lost it online. I ended up running a picco 7 pin rim, PS3 chain and a regular 3/8" 3003 008 8917 bar. Yes the bar width is a little close to the tooth spread but the guide gauge is right and I have had no issues tracking or sticking in cuts. Cuts like crazy!
Thanks man! I'm going to keep looking for that bar until I find one.
Seems the autotune kicked in on the 3rd cut with the husqvarna. X-cut chain is awesome out of the box.
I like Stihl and Husqvarna both. I will say, I think the 550XP MKII is the best 50cc saw.
Which saw do you prefer in the end?
I like them both for different reasons. I use them both all the time.
@@OldSchoolMillennial thanks for the reply. I picked up a MS261 a couple days ago. Pretty happy so far. They’re very hard to find up in the north east as dealers don’t have them and don’t know when they’re coming in. Only wish it hadn’t come with a 20” bar. It’s too nose heavy.
@@jonny5662 That's awesome, man! You're going to love your new saw. It's great that you have a Stihl dealer that you can go to for parts. Eventually if you're looking for a a different bar the 18" bar balances just right and complements this saw really well. Enjoy your new saw, nothing like a brand new chainsaw!
Both are great saws and no one will be disappointed with either the reason I bought the husqvarna is dealer support that’s what I think it breaks down to for ppl
Good job with your Stihl VS Husqvarna reviews. I've had equipment from both manufacturers and am getting ready to replace an old Husky 345 run of the mill saw that's served us well for over 25 years. I was leaning towards the Stihl MS261CM but was also aware of the Husky 550 XP MK II. I'll be purchasing the Husky and presenting it to my son as a Christmas present as he's taken over the tree work on the property.
That is awesome! He will enjoy using that saw for years to come. Here's to the next 25!
I'm giving away a BRAND NEW STIHL MS 261 chainsaw! Enter now through November 23, 2023 (Thanksgiving Day). Details here: ruclips.net/video/ZBVu7w2BElM/видео.html
Great video, which saw do you prefer for cutting all day.
Great video! Going to be buying one or the other in the next week. Sometimes my 372xp is overkill, need something a bit lighter sometimes. Luckily I have dealers for both brands about 30 miles away.
Nice, man! I hear you on wanting something a little less powerful sometimes. I have another video on these two saws coming out in the next day or so. You might want to check it out.
@@OldSchoolMillennial Just saw it show up in my feed, off to watch it now!
Nice round two!
Nothing new just another vid of a husqvarna spanking a stihl... same ole, same ole!!!!!
Husqvarna just makes a fast saw across the product line.
I bought a ms 261 c-m I have a dealer up the street I love it I’d like to try the husky though
Question :
Where did you get the double dog jaws for the 261 ? Thanks and cheers.
I actually bought mine off of Ebay. Part number 0000 660 0800. You can probably ask your dealer to order this part number for you. I made a video adding this dog to my 261(see link). Hope this helps! ruclips.net/video/ltpaQfeBrrM/видео.html
Hi, Just to let you know I respect what you say in your videos! Its Honest thoughts! Just my 2 cents worth. I have the stihl ms 261 non-tronic and think the stihl chains and bars are a little better than Husqvarna. The in board clutch is my preference. I was able to get a nice stainless steel set of dual Westcoast spikes witch is really nice. More trouble finding for Husqvarna. Anyway Good Videos !!!!! I will keep watching yours ! Thanks Again !
Thanks, man! I appreciate it!
I looked at both of these saws side by side at a dealer yesterday. It looked like with the 18” bar the stihl had more effective cutting length than the husqvarna. Is that the case? How many drive links for the chains? If the stihl is pulling more teeth through the wood that could equate to more load on the engine and slow it a little.
The Husky engine case design protrudes more than the Stihl with the same bar. You lose 1" of bar length with the husky. Just get a 20" bar on the Husky-it balances fine with it.
Tack för denna videon med husqvarna 550 och stihl ms 261 😊 måste fråga dig vilken vanligaste märkern på allt i från traktor och motorsåg, röjsåg och andra märken de jag misstänker är john deere och case och motorsåg partner/ mcculloch stihl.
Wow your channel is blowing up i remember you not like 200 subs a few months ago when I subscribed to your channel im happy to see your page getting more exposure
Thanks, man! The growth is exciting. Thanks for supporting us from the beginning!
@@OldSchoolMillennial i enjoy the content I have a channel i just don't put enough effort into editing so im growing slowly lol
The cut is no joke it cuts pretty fast right out the box
Wich saw is more comfortable for all day work?
I have the Husky 500 Mark ii and also LOVE this saw. It’s a screamin demon for sure.
It's a lot of fun to run!
The husky seems to have more torque it kind of holds its rpm better under load
On a different note I’ve heard the Husky has a beefy bottom end which might a count for the added weight.
Looking at getting a 261 or a 550 mk 2. I haven’t used both , but I picked both up. I want to like the husky and I still do but compared to the 261 , the 550 mk 2 feels really cheesy/ full of plastic , and it’s half a kilo heavier then the 261 !
Ive heard great things on both saws.
For me I had stihl, tried a husqvarna (346xp), sold it right away cause the stihl was much easier to repair.
I'm surprised the store gave you a green chain on a 261. That's lame! Mine came with a yellow.
It may be dealer specific.
I have both I can't tell the difference
Seems like they are neck and neck in the first half and then the husky walks away half way through.
Well I saw more movement and rocking the saw on the Husqvarna. The stihl you were just letting it go straight and slow. You can manipulate the saw to squeeze out a 2 second ish or so lead margin. Hell common sense shows that.
Doesn't surprise me one bit
Try with same chain for example Oregon i
Think the difference are small
I see this was made a couple years…do you still feel the same way?
I've got a third 261 vs 550 video coming out later this week, and I'll share more then.
The husqvarna runs faster in the wood. I don’t think that makes is better, just different. In the real world that 2 seconds won’t make a difference. Both great saws.
Can't go wrong with either, in my opinion!
In full day of buckin firewood that 2 seconds per cut will add up to make a significant difference.
They are both great saws. Good video.
I completely agree. And thanks!
Great video, not surprised by the results at all. I actually ended up with a loop of the SP33G when it was first released and normally don't ever run green chain. The dealer gave it to me free and said I think you'll be surprised by this. He was rite, it cut unbelievable and had I not known it was green I wouldn't have believed it. The geometry and narrow kerf of it is just fantastic for what it is.
Love, love that 550! Fantastic video, thanks again! -Brad
Thanks Brad!
I'll stick with the Echo 501p for the same performance/quality and way less money.
Looks like the Husky revs higher. I have Stihl and Husquvarna brand saws, like them both. It's kind of an either or, just depending on which you prefer.
I am a husqvarna fan for sure and have had great service with them. Today I bought the sthil ms 261. They both are good saws for sure.
I have both of those saws the orange Saw is definitely the faster saw but the The white Saw more reliable
I have the 2013 MS261 non M-tronic model,have used it to cut firewood in the Pacific NW, mostly Fir, Lodgepole pine. The bar is 18" with .325 .050 74 link RS pro chain. I cut about 4 chords/season over 8 years of beetle killed wood. The saw has been very reliable, on my third chain, keep the bar out of the ground! when cutting... I found the chain hard to profile and sharpen with the 3/16" file after some wear, so I use the 1/4" file and that made an improvement, and also watch the raker height.
I've got a 261 which is great. I was torn between the 550 and 261 I went for the Stihl in the end as I had spares from my old saw. Although the husky dealer is closer to me. In hindsight I probably should have bought the 550. That said the Stihl is a great saw. I suppose really I should buy a husky and run them both. But then which one would I take out of the shed😂😂.
Secret option number 3: Both! 🤣
Again, honest and straightforward comparison. They are both good saws… Husqvarna is superior. I’ve run my 550XP next to buddy’s 261 often and we swap out. It’s very evident when you do this. What’s very revealing to me is that 3 small engine service centers I know in my area all favor Husky’s and they all say the same thing. Better quality, better design. They have no agenda, just opinions based on experience.
Thanks, man!
I own both these chainsaws in Australia cutting hard wood I like both but the Husqvarna 550xp
has more power I can feel the difference in the
Cut .
Yeah, you can't go wrong with either!
Love my 550 MII
Out of the box, the rakers on the yellow chain are too high. One swipe with the file on each one would close that gap.
This is like arguing about who’s new penny is shiner. Lol. Both great and most people would ever notice the speed difference. The biggest and most obvious difference appears to be a feel and ergonomic thing. Turns out that is a personal preference thing. I still think my penny is shiner than yours darn it lol
Lol. That is a good way of explaining it. You can't go wrong with either!
Good stuff… I’ll stay tuned.
Thanks for watching! Definitely check out the channel page and see if there's some stuff you like over there.
Ok now lets see you muffler mod them and then rerun test😀
Haha, that would be interesting!
I have a first gen 550 and did a muffler Mod. With a 18" bar it now bounces off the rev limiter most of the time with a sharp chisel chain.
I have a 550XP auto tune which is a nightmare as it never starts from warm start or idling, stalls if the saw is turned on its side or at certain angles, or while cutting just stops. The dealer tried updating software nothing and then I had an accident due to which could not use a chainsaw for a while and ran out of warranty - now I am trying to sell and being targeted by scammers!
I can't believe that!! I have a semi chisel. And it won! Wow!