Please note that it's absolutely normal that your printer will no more show the ink level because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used. They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
People like you makes the world a better place!!! My sincere appreciation for sharing this demo. In my view if one can save in any way possible, its a bonus. I just chucked my HP because it detects other cartridges but print 💩. Double lines etc. no fixing that, they made sure of that. Have a great day🎉
A good way to get a hole made, to re top-up ink, I found is, with a hot soldering iron. Just heat it up, and dab a small hole, where the screw would normally go in.
Hi bro! Thanks for this awesome video! I like it. Just have 1 question tho.. Why is my black ink indicator still orange? Even tho I already filled it up with ink? 🤔 please help with this matter. Thanks again! :)
sir please another help after filling the cartidge about 5 times it stopped printing and gives the follwing error support code 1401 the following ink cartidge cannot be found what is the problem now
@@KingABS khouya sme7 lia encore une question, j'ai suivi les étapes j'ai rechargé ma cartouche noire, et ça imprime hmdh; cependant kat khrej lia low ink et à cause de ça l'imprimante imprime moins rapidement que dab(galik bach may t7rgouch chi l3aybat haha). Ça te fait ça aussi? Merci
Ila kat imprimer mzyan pas de problème. Kaykon fihom système de production bach ma ysakhnouch les micro injecteurs li kaynin fras ta3 l cartouche. Low ink 3adi ytla3 lik f les messages d'alerte parceque bnesba liha hadik lcartouche épuisée et n'est plus valide.👍
@@KingABS oui tant que ça imprime bien c'est ça le plus important. Mais j'étais curieux de savoir si c'était le cas pour tout le monde. Merci encore une fois!
I refill the black ink cartridge PG 445 because its almost empty..now while im putting ink tru syringe, some leakage is coming out, although i only put 1ml .. what seams to be the problem?
The hole on the cartridge should be a little bit bigger than the syringe needle to free the air pressure inside the cartridge. If it's leaking after refill no problem, you need to wipe off the ink with a clean paper towel and you're good to go
Hello I saw your video and I filled my cartridges the black a d the colour ones ...but the black one does not print ...when I printed ,the black one in very light printing ☹ Can you tell me what's the problem??
Must be the air pressure inside the cartridge. It happens often . Let the cartridge set for a couple of hours outside the printer and try again . Set the printer to High Quality and print some sheets it should release the air pressure inside.
Hi! May I ask. I already refilled my cartridge the same as you 445 and 446. But, there's still orange light for black. Is it okay? Or do I still need to add color black on the cartridge? Please notice my comment. Thank you.
I did this for my black ink cartridge and my printer is still saying that i'm running out of ink Do you know want can i do please ? Thank you for this amazing tip bro !
Absolutely normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used. They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
You can do it many times as the cartridges's chip works fine. Once it's burned it's done. I'm still using the original color 446 cartridge for two years without any issue.
Hello! I refilled the black cartridge when it said it ran out of ink. I refilled it, but it still says it’s out of ink. Can i fix it or do I have to buy a new cartridge?
@@KingABSHello again! The printer said that the black cartridge is completely out of ink even though i filled it up. It shows a red sign unlike the colored cartridge with the yellow one
Hello! I tried the tip that you gave on some who commented here, but my printer does not recognize my refilled ink and it says that I still have low ink. What can I do? Will it be fine later on even if the B button is blinking all throughout? I also tried to print using black ink and I do not see any problem with the printed one.
@@realayoub1539 Yes use can use your refilled cartridges normally but keep in mind that the ink level indicator will remain flashing because the system detect that the cartridge is used or refilled .
Totally normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used. They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
@@KingABS can you use any one or you must use a specific ink ???? i would like to contact you in privte , do you have a facebook or an instagram or whatsapp ???
Hello my friend. And if information comes out that the cartridge is empty, or something similar, for example, on the TS3340, then what will you need to press to get rid of the error? And then I choose a printer for home, so that I can refill without problems. On the old Epson TX117, in general, the problem is constant with cartridges, even pirate ate ate as they eat, and then it constantly gives errors, you have to constantly reinsert them.
Long press on STOP Button (Red Triangle) until you hear a sound . And you're good to go. Note : if you're using your printer with PC or Laptop after a cartridges refill, when a pop up message shows that you can't print because ink is running low DO NOT CANCEL PRINTING . Just long press Stop Button until the message disappears and the printer goes back to work 👍 Hope it helps.
Oh! Thanks for the answer. Do not tell me which one is better to take, TS3340, or ТS3140? Are they different in cartridges? And as I understand it, the 3140 is older, and the 3340 is brand new. Now I'm sitting writing in a notebook which one to buy) Comparing which problems will not be, which will be easy to refill without errors
They are almost identical. The only difference is the ink cartridges. TS3140 uses : 445 / 446 TS3340 uses : 243 / 244 Both are easy to refill as well. It's up to you to choose 👍
Totally normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used. They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
Hello! Thank you very much for this truly, magnificently helpful video. If I may just ask one question, do I need to use warm water to wash the insides first before refilling it? Noting that my problem isn't that the ink dried it's just that I've completely run out of ink. Thank you very much, you're a kind, kind person!
Thanks for the reply. My cartridge is same like yours. I am planning to buy a universal ink with a brand BULK INK, i saw one of your inks has that brand, is it a good one?
@@tep0214 being using refilled cartridges for 2 years without any issue. For the adequate quantity you keep injecting ink until it start leaking then suck back a little bit and you're good to go.
ماشي مشكل يهبط عادي. خاص الثقب لي درتي يكون كبر شوية من رأس المحقنة باش يساعد على خروج فقاعات الهواء وما يكونش الضعط كبير داخل الخرطوشة. مسألة أخرى مهمة ، حاولي ما تضغطيش بقوة على المحقنة وما تسرعيش وخودي وقتك الكافي في عملية الملأ. ضغطات خفيفة جدا جدا ستنجح معك مئة بالمئة (عن تجربة روتينية مستمرة) بالتوفيق
No . Totally normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used. They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
14 ml for the black cartridge 5ml color for the color cartridge. I usually fill the syringe and start filling up until a small amount of ink came out. Done
Hi hello im newbie here can i ask bro if what kind of ink you refill to your printer i want to convert a mg 2540s printer to ciss any help please that will be wonderful
from which online store we can purchase these cartridges? and as u said when i refilled my printer is not recognising it as u said i pressed the triangular button but still same problem
Thanks bro, i found it very useful 😍😍😍. Soon i am gonna refill my pg44 & pg445 for first time. One question bro, my ink running on low, is it ok to refill directly or waiting till finish first? Thanks a lot
Totally normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used. They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
That's normal because there is too much pressure inside the cartridge. The hole you make to refill should be a little bit bigger than the syringe head to let the air bubbles going outside freely (as shown in the video). If you do this you'll get a clean refill without too much wasted ink on the bottom.
@@AHMEDADEWALEabbblog Depends on the cartridge itself and how long the micro head nozzles will hold up before getting completely blocked . I'm still using my first color cartridge that came with the printer , on the other hand the black one was blocked after 10 or 11 times of refilling .
Must be air inside the cartridge. The hole you made should a little bit bigger than the syringe's needle to release the air pressure inside when refilling,then print a few examples to see if there's any improvement.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Please note that it's absolutely normal that your printer will no more show the ink level because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used.
They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
What brand of ink you use?
Opps I didn't see this update about the blinking light after refilling. :) thanks again man!!
@@marianne. The STOP button
Not working bro
Thx Cannon legend
Since I bought my printer last year i didnt change the cartridges. I use this method every month. Thanks man
👍
Can I use any ink or it has to be canon ink
Universal ink 👍
People like you makes the world a better place!!! My sincere appreciation for sharing this demo. In my view if one can save in any way possible, its a bonus. I just chucked my HP because it detects other cartridges but print 💩. Double lines etc. no fixing that, they made sure of that. Have a great day🎉
Thank you 👍
A good way to get a hole made, to re top-up ink, I found is, with a hot soldering iron. Just heat it up, and dab a small hole, where the screw would normally go in.
👌
Excellent demonstration. Refilled my cartridges with ease. Thanks fir the video
Wow, thank youuu. We're gonna save up so much from this as we use up tons of ink.
Great video!!👍 can u please suggest me the ink preferable for canon pixma mg4240 printer's cartridge??
How many ml in black and other colors?
I have already a hole there.. So do i need to screw again?
Hi bro! Thanks for this awesome video! I like it. Just have 1 question tho.. Why is my black ink indicator still orange? Even tho I already filled it up with ink? 🤔 please help with this matter. Thanks again! :)
تبارك الله عليك👍👍👍....عرفتي هاد الطابعة باش عجباتني مافيهاش قوة التخنديش غير زول، شارجي وعاود ركب والله إلا ناضية!!!
👍
Thank you for the video...
I have an issue, after the refill my printer is still not printing how do I resolve this problem...
Did find any solution?
How many mL for the black and coloured ink need to be in the syringe?
Did you know???
@@Nehalm_mohammed 10ml each
Ye cortez kaha mile ga plz sir batayi ye modal- MG2440
Very useful thanks!
Thank you so much my friends. I leant a lesson from this
👍
Mine started coming out from downside of cartridge, also can’t see blue when tried on tissue, will try to print and see what i got here
Thanks. Now I try it
Thks fr your help bro... After I've done it my printer still shows ink level low why?
This is of great help. Thank you
Why my ink is out from the cartridge???when I refil..pls help
So useful thank you
Great video ... just one question after refiling the black cartidge how to close the opening that i have made with the screw .... many thanks
Put back the original sticker or wrap with some transparent tape and your good to go 👍
@@KingABS but i cant close the hole .... right ?
No problem 👍
@@KingABS thank you
sir please another help
after filling the cartidge about 5 times it stopped printing and gives the follwing error
support code 1401
the following ink cartidge cannot be found
what is the problem now
Excellent job man .. Well Done 🙂
Thank you so much for this video. Such a big help. God bless.
such a big help thank you ❤️
👍
How many ml of ink in syringe for each colour
Salam khouya, merci bcp pour le tuto 3ndi gher sou2al wahed bach kat 3rf ra khassk tchargi les cartouches? Mchkour akhi
Chokran akhi . Mli kaybdaw ybano lkhotot baydin f les imprimés khasek tchargi. Puisque la puce katkoun las9a fl cartouche maghadich t3tik niveau dyal lmdad,hit bnesba l'imprimante,la cartouche rechargée est indétectable (bach tmchi takhod wahda jdida b $$$$$$)😉
@@KingABS Merci c'est clair!
@@KingABS khouya sme7 lia encore une question, j'ai suivi les étapes j'ai rechargé ma cartouche noire, et ça imprime hmdh; cependant kat khrej lia low ink et à cause de ça l'imprimante imprime moins rapidement que dab(galik bach may t7rgouch chi l3aybat haha). Ça te fait ça aussi? Merci
Ila kat imprimer mzyan pas de problème. Kaykon fihom système de production bach ma ysakhnouch les micro injecteurs li kaynin fras ta3 l cartouche.
Low ink 3adi ytla3 lik f les messages d'alerte parceque bnesba liha hadik lcartouche épuisée et n'est plus valide.👍
@@KingABS oui tant que ça imprime bien c'est ça le plus important. Mais j'étais curieux de savoir si c'était le cas pour tout le monde. Merci encore une fois!
This video is a great help. Thank you.
👍
After refill both catridges omit areas on printed paper. What could be the problem and how can I solved it ?
I
refill the black ink cartridge PG 445 because its almost empty..now while im putting ink tru syringe, some leakage is coming out, although i only put 1ml .. what seams to be the problem?
The hole on the cartridge should be a little bit bigger than the syringe needle to free the air pressure inside the cartridge. If it's leaking after refill no problem, you need to wipe off the ink with a clean paper towel and you're good to go
very Very useful. Thanks a lot
Please is it compatible with any other ink or it has specific ink to be used?
It should be Universal ink
Hello I saw your video and I filled my cartridges the black a d the colour ones ...but the black one does not print ...when I printed ,the black one in very light printing ☹
Can you tell me what's the problem??
Must be the air pressure inside the cartridge. It happens often . Let the cartridge set for a couple of hours outside the printer and try again .
Set the printer to High Quality and print some sheets it should release the air pressure inside.
great work, keep up
Hi! May I ask. I already refilled my cartridge the same as you 445 and 446. But, there's still orange light for black. Is it okay? Or do I still need to add color black on the cartridge? Please notice my comment. Thank you.
It's normal. Please read my pinned comment for more details
Thank you so much for this wonderful tip...
👍🙏
Is there any other way to drill it? If you don’t have driller
Heat up a small screwdriver. It should work well.
Can i use any brands of ink?
Yes , make sure it's suitable for canon Inkjet printers
I did this for my black ink cartridge and my printer is still saying that i'm running out of ink
Do you know want can i do please ?
Thank you for this amazing tip bro !
Absolutely normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used.
They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
Hi, there's so much leakage of the ink when I refill it. How to handle that?
fill only 2.5 ml
Is it okay to change the cartridge of a printer?? Mine is 445 and 446 is it okay to change it??
Can I use any brand of colour refills or is these a specific one for Canon cartridges?
I use universal ink in all my ink refill cycles with no issues 👍
Hi, is it okay to refill with any ink with the brand bulky ink
Yes . It's what I'm using till now , no problem 👍
I poked a hole in the black ink cartridge from a different place than what was shown in the video can this be why that when i print its blurry ?
Nooo, you can even poke wherever you want that's wat I dd, and it's printing so well
Dear why is it that the moment I inject the ink,the hole comes out on the back hole. Can u help me with it?T.y in advance...
Thank you how many time I can refill them?
You can do it many times as the cartridges's chip works fine. Once it's burned it's done.
I'm still using the original color 446 cartridge for two years without any issue.
If I don't have the drill machine to open the hole what else can I use
Use a thin screwdriver and gently try to make a small hole (take your time)
Fantastic video thank you for your share
Can i use Universal refill bulk ink for canon mg2400
Yes
i did every step in the video
still not working and giving me the sign that i have to refile the cartlige
my printer is canon ts 3100
any advise?
Hello! I refilled the black cartridge when it said it ran out of ink. I refilled it, but it still says it’s out of ink. Can i fix it or do I have to buy a new cartridge?
Please read the video description
@@KingABSHello again! The printer said that the black cartridge is completely out of ink even though i filled it up. It shows a red sign unlike the colored cartridge with the yellow one
It's normal , all you have to do is long press the triangular button until you hear the printer back to work again, then release the button .
@@KingABS When I try to print it opens a tab which says the following ink has run out. The printing process won’t start. Is there a way to fix this?☺️
what kind of bottle of ink is this? so that I know what bottle to buy. answer meeeee
Any universal brand compatible with canon printers will do the job
i ve already inject the ink on the cartridge but still the display shows that it was running out?
what to do?
@@gracepalermo2832 please read my pinned comment
Do they last long?
The cartridge can hold up to 12 times refill or even more depending on how often you're using the printer.
I tried your tips but it keeps on popping that its run out of ink and its not printing. What to do
Please read the video description
Which type of ink can I buy to refill my Pixma 494 please
Can we do this for canon ts304 printer ..
Yes, you can 👍
Your are a Top ! Tks
Ink not working. Dear Brother
Ink Not coming from cartridge. Any suggestion
Khuya 3yit n9lb 3la lencre mal9itush allah yhfdek 3tini lien wla lakn mumkin nkhlsk fih ana mn fes
Knt khdito man Jumia 300dh (4×250ml) mazal khdam bih aucun problème 👍
Ghadi dkhol Jumia, ktb (encre universelle) ghadi ytla3 lik flpage lawla( 4 bouteilles 1 litre), taman 399dh zayed 3la li kan walakin ystahel ma3mro darli mouchkil f les imprimantes bjouj.
Lahoma yassir 👍
@@KingABS allah yhfdek
@@simohamedelbakkouchi9460 🤲👍
Hello! I tried the tip that you gave on some who commented here, but my printer does not recognize my refilled ink and it says that I still have low ink. What can I do? Will it be fine later on even if the B button is blinking all throughout? I also tried to print using black ink and I do not see any problem with the printed one.
hi man plzz After refill does the printer print without problems, or does it not accept printing papers?
@@realayoub1539 Yes use can use your refilled cartridges normally but keep in mind that the ink level indicator will remain flashing because the system detect that the cartridge is used or refilled .
Totally normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used.
They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
Hello. May I ask what brand of ink refill did you used for that cartridge? Thank you.
Universal ink for canon and many other printers.
How much can it cost to purchase those inks please
@@EruConsLtd 30 /35$ (black and 3 colors)
@@KingABS how much ml you send to catridge
When the ink start coming out push back the syringe to suck the few drops of ink and you're good to go
Thanks its worked
My ink keeps spilling when I try
Did I do anything wrong?
The hole you make on the cartridge should be a little bigger than the syringe's needle
Sorry for being late 😉
@@KingABS thank you
thank you so much for this, its very helpful
👍🙏
Where did you buy all of your tools?
lah ihfdek a5ouya ila momkin smeyte o bch7al 9bti lmdad
Mdad 3adi Universel knt khdito man Jumia 300dh , 4 bouteilles 250ml flwahda.
@@KingABS can you use any one
or you must use a specific ink ????
i would like to contact you in privte , do you have a facebook or an instagram or whatsapp ???
how long does ink work
Is it compatible with Pixma mg3640s?
Same procedure for most of ink cartridges
Hello my friend. And if information comes out that the cartridge is empty, or something similar, for example, on the TS3340, then what will you need to press to get rid of the error? And then I choose a printer for home, so that I can refill without problems. On the old Epson TX117, in general, the problem is constant with cartridges, even pirate ate ate as they eat, and then it constantly gives errors, you have to constantly reinsert them.
Long press on STOP Button (Red Triangle) until you hear a sound . And you're good to go.
Note : if you're using your printer with PC or Laptop after a cartridges refill, when a pop up message shows that you can't print because ink is running low DO NOT CANCEL PRINTING . Just long press Stop Button until the message disappears and the printer goes back to work 👍
Hope it helps.
Oh! Thanks for the answer. Do not tell me which one is better to take, TS3340, or ТS3140? Are they different in cartridges? And as I understand it, the 3140 is older, and the 3340 is brand new. Now I'm sitting writing in a notebook which one to buy) Comparing which problems will not be, which will be easy to refill without errors
They are almost identical. The only difference is the ink cartridges.
TS3140 uses : 445 / 446
TS3340 uses : 243 / 244
Both are easy to refill as well.
It's up to you to choose 👍
@@KingABS
Hello, I refilled with Universal crown ink, the led beside 'c' is still showing that the ink is finished. Any help?
Totally normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used.
They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
@@KingABS thank you so much sir for reply. I tested it, it printed. I am currently performing scanning with it.
جزاك الله خير الجزاء وأحسن الله إليك
Hello! Thank you very much for this truly, magnificently helpful video. If I may just ask one question, do I need to use warm water to wash the insides first before refilling it? Noting that my problem isn't that the ink dried it's just that I've completely run out of ink. Thank you very much, you're a kind, kind person!
No. Just refill it normally, and you should be good to go.
Thanks for watching 😉
if i a buy canon ink refill, even if is says for g series, can in work in this cartridge?
Absolutely
Yes 👍
Thanks for the reply. My cartridge is same like yours. I am planning to buy a universal ink with a brand BULK INK, i saw one of your inks has that brand, is it a good one?
Thank you👌🏻👌🏻
@@honeyninacabreros9993 Yes I'm still using it without any issues 👍
Sir is this also the procedure for Pixma PG-460 (Black)
CL-461 (Colour), canon pixma ts7440 printer
Yes 👍
They say that refilling the cartridge can damage the printer, is it true thanks
How many ML do we need to put
@@tep0214 being using refilled cartridges for 2 years without any issue.
For the adequate quantity you keep injecting ink until it start leaking then suck back a little bit and you're good to go.
Sir did you just use a regular syringe used for medical
Please share the link where I will buy these ink ?
Is it okay if i replace the cartridge to 445xl from 445?
Yes no problem
What ink is you use?
Universal ink for canon epson hp....
Could you please give us links to buy it, like the Amazon store
3afak khoya mhtajaha db 3ndi bhalha o 3yit mn9lb 3la chi hel walo fax kn3mrha blmdad kihbt dkxi li 3mrto drt skotch o walo
ماشي مشكل يهبط عادي. خاص الثقب لي درتي يكون كبر شوية من رأس المحقنة باش يساعد على خروج فقاعات الهواء وما يكونش الضعط كبير داخل الخرطوشة. مسألة أخرى مهمة ، حاولي ما تضغطيش بقوة على المحقنة وما تسرعيش وخودي وقتك الكافي في عملية الملأ. ضغطات خفيفة جدا جدا ستنجح معك مئة بالمئة (عن تجربة روتينية مستمرة)
بالتوفيق
no notification for ink level and genuine detection?
No . Totally normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used.
They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
how many ml of inks did you use per color including black?
14 ml for the black cartridge
5ml color for the color cartridge.
I usually fill the syringe and start filling up until a small amount of ink came out. Done
@@KingABS ill do this one thanks
👍
Where can I do the refill
Hello po, Is UV Dye Ink compatible with this kind of cartridge? Thank you so much
I didn't used it before to be honest
Hi hello im newbie here can i ask bro if what kind of ink you refill to your printer i want to convert a mg 2540s printer to ciss any help please that will be wonderful
Universal ink, you can find it on Aliexpress 👍
from which online store we can purchase these cartridges? and as u said when i refilled my printer is not recognising it as u said i pressed the triangular button but still same problem
Bcz the ink is clogged. Watch this video👆7th method will help you👉 ruclips.net/video/p0tm8dNeE2A/видео.html
Thanks bro, i found it very useful 😍😍😍. Soon i am gonna refill my pg44 & pg445 for first time. One question bro, my ink running on low, is it ok to refill directly or waiting till finish first? Thanks a lot
Thanks. It's better to refill before running out of ink to prevent printer heads from burning
@@KingABS i see, thanks bro. Bless u
👍
hi is it universal ink you usr
Yes
where i can buy that kind oh ink you use
@@jessapining5584 Aliexpress or any online store
thank you
Which company ink you used, Bro
Universal ink for canon printers, Aliexpress .
Mast jugad..
2 or 4 ML ? Bro
Refill to top off and suck back a little bit and you're good to go
Thank you very much
khuya allah yhfdek ana mn fes mnin n9ed nchri lencre ?
Salam khoya knt khdito man Jumia, ma3raftch wach mazal disponible en vente aw la . Je pense ykoun f Aliexpress aussi
Désolé pour le retard.
how to reset the ink level..i have a warming light on B and i already refill the cartridge. but on the ink level is empty.
Totally normal because every ink cartridge has it's own electronic chip that tells the printer if either it's new or used.
They can be refilled many times even with flashing ink lights. If it stops printing don't press CANCEL Printing, Long press the triangular button until you hear the printer getting back to work again 👍
How much the cartridge if i buy 445 and 446
15$ for the 445 and 20$ for the 446 i believe
when I fill my black one it leaks from the bottom even if I fill it with a drop, do u happen to know why pls
That's normal because there is too much pressure inside the cartridge. The hole you make to refill should be a little bit bigger than the syringe head to let the air bubbles going outside freely (as shown in the video).
If you do this you'll get a clean refill without too much wasted ink on the bottom.
How many times can I refill the cartridge before it’s stop working
@@AHMEDADEWALEabbblog Depends on the cartridge itself and how long the micro head nozzles will hold up before getting completely blocked .
I'm still using my first color cartridge that came with the printer , on the other hand the black one was blocked after 10 or 11 times of refilling .
@@KingABS thank you
الاتقان في العمل 💚
hii i just did this and there are lines when printing, what could be the problem? :
Must be air inside the cartridge. The hole you made should a little bit bigger than the syringe's needle to release the air pressure inside when refilling,then print a few examples to see if there's any improvement.
@@KingABS will do this! thank you!
@@sophiaviray1154 👍
Hello, I’m having the same problem after refilling, did it work already???
Thanks you very much😊👍
👍
is that a normal syringe?
Yes
How many ml of inks for black and for colors?
I slowly keep injecting the ink until it came out then i pull up the syringe . I've never measured the quantity to be honest.