My First Patron Sent Me His Grandfather's Pocket Watch
HTML-код
- Опубликовано: 11 фев 2022
- This time around Marshall has an Elgin pocket watch from 1919 on the bench! This was sent in by the first supporter of the Patreon for this channel, and it was a pleasure to work on his watch for him and his family!
Support Wristwatch Revival via Patreon: / wristwatchrevival
Visit Sutcliffe Hansen for toolkits, revived watches, straps and more: sutcliffehansen.com/
Follow on Instagram for Project Updates in between video releases: @wristwatch_revival
------------------------------------
These are Amazon affiliate links to some of the equipment used for these videos and purchasing anything through them helps support the channel.
WATCHMAKING TOOLS AVAILABLE ON AMAZON:
Bergeon Screwdriver Set: amzn.to/34URcok
Dumont Tweezer #3: amzn.to/2YX4Hjl
Bergeon Springbar Tool: amzn.to/3jF8pX1
Bergeon Case Opening Ball: amzn.to/34VLbYg
Bergeon Presto Hand Removal Tool: amzn.to/3bfHtdo
Bergeon Movement Holder: amzn.to/3hQsY29
Horotec Hand Setting Tools: amzn.to/2Gdye1K
Rodico: amzn.to/32K0PDG
Bergeon Blower: amzn.to/34RgVxX
Bergeon Case Opening Knife: amzn.to/34VHr9e
Bergeon Quick Service Kit: amzn.to/2QHnScC
Ultrasonic Cleaning Machine: amzn.to/3i6BBER
Amscope Microscope: amzn.to/2EuReZ4
Multifunction Timegrapher: amzn.to/344jw5I
CAMERAS AND AUDIO:
Main Camera, Sony A7III: amzn.to/2Dk3Q4K
Secondary Camera, Sony RX100: amzn.to/2Dlrwpx
Tertiary Camera, Sony A6400: amzn.to/3jVaYqh
Main Macro Lens, Sigma 70mm f/2.8: amzn.to/3lD4Wdb
Secondary Macro, Laowa 100mm f/2.8 amzn.to/2ZGmFKo
Camlink 4k Video Converter: amzn.to/3hTiiQf
Rode USB Microphone: amzn.to/2EQphLb
Audio Recorder, ZOOM H6: amzn.to/31R11BQ
Small Sirui Tripod: amzn.to/2YVgeQl
Sirui Tripod Head for Overhad Camera: amzn.to/2QNoNZ8
COMPUTER STUFF:
Apple Macbook Pro: amzn.to/2EFPKvr
Synology NAS: amzn.to/3bpVTaY
Seagate HDDs for NAS: amzn.to/3hQ5hqt
Samsung Portable Drive: amzn.to/34UdhTT 
Хобби
I just wanted to let you know I've just finished buying everything I need to get into this hobby because of you. The timing of a new release was just the perfect cherry on top. Thank you! :)
It's really fun. I was insanely lucky that my dad and grandfather were watch and clock makers so I didn't have to buy any tools. Fun times.
Great choice, I think I'll end up doing the same as soon as I've got some freetime; I've already have a "patient" it's a Waltham 8 days clock from the 40's but it's pretty much a big pocket watch with a quite strange setting crown, and it comes from an 1948 RCA transmission electron microscope which became mine after a lab couldn't keep it anymore and it was destined to landfill fortunately i saved it, it would've been a shame to lose that marvel of vacum tube electronics
That’s a lot of money!
One does not simply “have enough” watchmaking tools.
That is lucky for you. Me however my grandfather was a watchmaker but he died in 1960 when I was only five so all of his tools and supplies are gone. Where and to when I'll never know.
The fact that they were able to manufacture precisely machined but irregularly shaped tiny things like the pallet fork with 19th century technology amazes me even more than tiny screws.
I was thinking the exact same thing. It's amazing how small some of these parts can be.
@@dygger I would also like to see how they machined the gears
@@woodwaker1 Watch gears were mostly manufactured by hand until late 18th century: ruclips.net/video/uxzWk7v9sUo/видео.html
@J Hemphill Thanks for the information. Still amazing
Yeah it's incredible what they could do
As an engineer, I must say that was very satisfying to watch. I don't think my hands are steady enough to attempt anything like this. Thank you.... Poetry in motion !!!
@tradde11 our dad's would have had A LOT to talk about!
@tradde11 Rest them on the table. My shaky hands are annoying for paintibg model ships so I rest them on the table, sometimes using the second hand to stabilize the first.
I just pulled my great-grandfathers pocket watch out of my safe and found out more about it. It's a Hamilton 912 made in 1933. It's Nickel with a gold chain and a knife fob. Still works. Had this watch for a few decades after my grandmother gave it to me but never thought much about it until I started watching your videos. It's not railroad quality nor is it very valuable, which isn't a big deal to me. Makes me want to start wearing waistcoats so I can wear it all the time. Thank you!
This was awesome to see and makes me think about when I had my Great-grandfather's pocket watch fully serviced a few years ago. It was in rough shape and not working and it ended up costing more than the value of the watch itself, but it was worth it to know it might keep running for another 70 years. My Grandmother gave it to him as a gift when she got her first paycheck after turning 18 and he kept it in his front pocket until the day he died. It had the same level of wear and tear as this watch and I would have never considered getting it replated and covering up that history, just like you were saying. Thanks again for sharing this!
Isn’t that grand father
Mine is a similar story, as two years ago I had my grandfather's pocket watch serviced for more than its monetary value; although of course it has lots of sentimental value to me.
If you haven’t heard or tried it yet… Use Nano-oil… ruclips.net/video/rzVy4oxoTEA/видео.html
Repent to Jesus Christ
“I will say of the Lord, “He is my refuge and my fortress, my God, in whom I trust.””
Psalms 91:2 NIV
You did the right thing.
While sorting some stuff we found an old Pocket Watch. After asking my grandmother(s) about it we learned it actually belonged to their father and - as far as I remember - it was a gift to their wedding. It isn't a special watch and it actually does run, but stops after a few minutes.
I didn't want a full restoration (the dail is in a bad shape), but I'd love to get it running - just so it can be used as a watch.
My local Watchmaker checked it and said its to "broken" and turned down the job. Somehow I'm not convinced since the shop tried to sell me a new pocket watch - they didn't understand that I didn't want ANY Pocket Watch, I wanted this one.
Now its safetly stored and I want to find some Pocket Watch Maker to check it. Thanks Marshall for the video, this was amazing to watch.
You'll want to look for someone who specializes in restoring vintage watches. There's definitely some people in America doing it but I think there's a much larger market in Europe for this sort of thing (though I would be weary of shipping a watch like that overseas). Maybe try asking around on the /r/watches subreddit and see if they can recommend a good restorer.
@@KillerWhale806 Thanks, I'm from germany so I hope I can find someone here in the area that is specialized in old vintage watches. The subreddit is worth a try, if someone there can point me to the correct watchmaker that would be awesome.
@@Motti22
I knew you were German as soon as I saw you capitalizing nouns.
you're wrong. That's just because he have use copy/paste while making sure the translation was correct. Nothing to do with being German.
I love the little design details all over that you can't appreciate truly until you take it apart completely. This thing is art.
Beautiful curved lines, engraving, tool marks, grain and decorative polishing.
This is an exceptional video, I have my grandfathers watch and he was a Roadmaster on the Canadian Pacific Railroad for 35 yrs. It is an Elgin Railroad watch he got from a man during the depression.
This is amazing- I bought a couple of early 1900s elgin pocket watches movements that are in remarkable shape. I bought the pocket wat movements because of your advice on your videos, and then I learned about how there are different sized pocket watches, and the ones I bought were size 0 LOL. So they aren't alexactly larger and easier to work on, but they are unique and I love them and have enjoyed troubleshooting the issues like a broken pallet fork jewel! Thanks for making the amazing videos and for getting me into a new hobby and obsession!
SAME! The first pocket watch I tried wasn't much larger than my wristwatch but it's still a blast. Marshall's videos have gotten me through a lot of issues with this new-found hobby.
I loooooove the textured finish they used on the ratchet & crown wheels. So lovely, and something only the watchmaker will ever see.
If I could make one mod it would be a exabition caseback, especially since the original looks kinda rough anyway.
Really is a well loved watch either way though with so much history worn into it
Yeah that's called snailing and it's gorgeous
I think the recent acquisition ClickSpring has made is capable of doing Snailing (of which there's a special breed of machine just for that). Worth checking out his video on it and what it can do.
love the attitude of the makers
no-one but a watch smith will ever see it and then only every 10 years so lets make it beautiful because....why not
I have an 1882 Elgin in a Duebler (sp?) case. The front cover has an engraving of an elk. The back has two leaves. One opens to hold a photo, the second one opens to reveal the movement. It is a lever set watch and keeps beautiful time. I wear it whenever I am wearing bib overalls as they have a bib pocket and button hole for this reason.
Another job well done!! I Wanted to tell you about my 1945 Bulova, was my great uncle's watch. He told me he received it Christmas day 1945. He passed in 1994 4 months after his 100 birthday. Ive had it since then. Its been basically my daily watch since. Looks nearly new except for some slight patina on the face. 10 k gold filled still sparkling. Original metallic band also. In the 28 years I've had it, no repairs, I have it serviced every 5 years. 77 years old, it gains about 3 minutes every 6 days. BULOVA can be very proud of this old work horse!!
Amazing what a modern mainspring and a cleaning can do for these things. Seeing the graph read +1/-1 must have been great
I love how similar the disassembly is to dissection, it's like the watch is a living thing!
Repent to Jesus Christ
“I will say of the Lord, “He is my refuge and my fortress, my God, in whom I trust.””
Psalms 91:2 NIV
J
"A waterfall of Wheels," you Sir are a watchmaker and a poet! Love it, 👍❤️
You've always said that reinstalling a balance and having it immediately start ticking again is the most satisfying feeling in watchmaking. Having now experienced that feeling for myself, I absolutely agree. Best feeling ever. 10/10, would recommend.
After watching here I opened my pocket watch for the first time gave the top jewel of the balance wheel a light cleaning with a tooth pick and gave the wheel a tap, my heart leapt as the balance came to life. I thought it was broken. Its still filthy inside and in need of cleaning but that feeling when it came to life was priceless.
@@ComfortRoller May i ask what actually qualifies as dirty, im new around here and well, lets suppose the watch was sat inside a drawer for well over 20 years with no service, what sort of filthiness should i expect to find?
This is one of my favorites so far. Watching you give a family heirloom the care and respect it deserves is a real treat. Thanks for sharing!
I really like that you’re using this hobby to better yourself and that the art of watch repair has helped you gain more insight into your own personal traits. Always enjoy these therapeutic sessions.
Marshall! Sir, you always surprise me with the way you restore valuable watches. This is amazing. Very proud of people like you saving the history. I really enjoy watching your videos.
I am fascinated by how carefully he handles the parts and arranges them on the bench. Watching his videos at the end of my working day is somehow soothing and mesmerizing. I almost don't care about the watch he's repairing...
Watching you work is a joy and ultra soothing. The added commentary reminds me of the director’s commentary on DVDs. Please keep these comin’
I have no reasonably idea of why this came up in my youtube feed but i absolutly love it! the precision on this craft is simply amazing, and the thought that they made this kind of complex mechanical engineering with the small tolerances needed in 1920 is beyond me;D truly amazing content! will without a doubt be following here for sure.
Been back a few times to this project...it's like comfort food watching this. Love the positive attitude and attention to detail.
This is a beautiful watch. To the point where this video enraptured me start to finish. I’m jealous of your first patron but glad he has such a fine device for you to service. I’m happy this is my first introduction to your channel as a clueless unsuspecting layman.
It would be great to see pocket watches making a comeback -- they have a quality all of their own.
Bad bot
In many ways people's phones are the new pocket watches. I know a lot of folks who don't wear a watch and just use their phone to check the time.
@@MrKrieger56 True which may help wristwatches make a comeback because it's more convenient than taking your phone out. For a while it was pretty dead, you could find am Omega from the 60s for 200 bucks if it wasn't a popular model. Seems like they are coming back a little. And people seem attracted to complex mechanical devices in the age of the transistor. A bit like a steam engine you carry around.
Watching your show always reminds of spending hours when I was a kid watching my Granddad showing me how to take watches apart to repair/clean them. Unfortunately he could never put them back together again, so we ended up with a cigar box half full of various bits from different watches by the end. Happy memories.
I inherited a few of my grand father's watches. I remember him wearing them, some for work in the fields and one for Sunday church. He was born in 1886, and the watches were not much younger than him.
Interesting story
@@oscarosullivan4513 He told me stories of the civil war from veterans he knew. How history is so interesting
Find that cigar box! Hahaha!
Oh my god. Stumbling upon your video completely randomly just made me took a trip to memory lane. A good childhood memory. My uncle owned a wristwatch shop and my dad would often take me and my mom when I get a brand new watch or have it repaired.
While they talked, I was so curious and intent on watching my uncle work on it. I see his tools and him working on the watch. It truly fascinated me. When he noticed me watching, he told me some stuff but I was too young to understand it lol.
My dad was an auto mechanic while his brother for wrist watches. I dearly miss them both. Imma go cry a bit. Q_Q
This is really cool to see! I grew up in Elgin and I’ve always heard about the old watch factory, but it was torn down quite a long time ago. I was never too into watches but maybe this will be my gateway in!
Hi Marshall, I've been watching you and Mark's videos for a while now, and find it amazing . I even bought some tools to tinker around with. I bought a bag of watches from eBay and some were wind up and others quartz movements. A fellow on eBay had three watches pretty cheap, and I bid on the, not very much, and in the bunch was an old Waltham that wasn't working. I took the movement out of the case and put it into a jar of Naptha (lighter fluid), and swished it around a bit, and low and behold, the thing started running. I think this will be the first one I'll take apart, or maybe, an old stop watch may dad used for his time study job, back in the 30's and 40's. Surely enjoy your vids, and look forward to seeing them. I'll be turning 85 in July ! Bob U. from N.E.Ohio.
I'm so pleased you kept the dents and worn appearance! Gosh something used to the state of that is just awesome and I'm certain there's a fascinating story behind each imperfection.
Seeing the insides got me giddy with all the tiny moving parts each having a specific purpose for an end goal of such precision.
It's amazing to see the majority still working after so many years
Yeah this was a special watch for sure
I ran into this channel. Never thought about watching someone refurbish watches! But, this is my 3rd in a row. It's so satisfying because it's a very slow, tedious process - yet it's calming to watch someone who has patience because I have absolutely n patience for tedious details. Wish I did. But, how satisfying. You narrarate and edit your videos perfectly. Thank you!
I've been watching your videos sporadically over the course of the last year and a half. I'm actually from Chicago, Illinois. But i grew up in Elgin, Illinois. Having the watch factory and the planetarium there for time keeping was kind of a throwaway. But knowing the history the city had in time keeping and manufacturing is completely insane. Crazy how a city with such heritage can fade away
Any time the watch is nearly put back together and there is still more than half the video remaining you know something unexpected is just around the corner.😁 Great video, Marchall, and congratulations on your new micrometer and lathe!
Just bought a pretty vintage (80-90s) watch while thrifting and thanks to ur vids I felt confident enough to pop off the back and I’ve ordered a replacement battery, it’s in such great quality so I think it’ll be able to run after I replace the battery :D
The Goodwill and other thrift stores are chock full of discarded quartz watches. They have no dollar value, and can hardly even be given away in today's smartphone and smartwatch culture, but if the style and condition meets with the seeker's approval they can be worth their small price plus the cost of a battery. Just remember that most of them can be replaced with brand new similar models - including ten year battery - for $9.95 to $39.95 at discount big box stores.
If changing batteries is desired, I suggest looking at the case back to find the battery number, then ordering six or ten of them from Amazon for less than the the price of one at a retail store. They also sell several batteries of six or seven different types all on one card, very cheap.
Those old case backs are friction fit, and have one small slightly raised spot where they are supposed to be levered free by a semi-sharp tool. Cover the back with a couple of layers of painters tape to prevent scratches - I guarantee for beginners the tool will slip and scratch the back if not protected. Don't use a knife - the blade is too sharp and the metal too brittle.
@@ammoalamo6485 I bought a guess chrono from ebay for about $10. It needed a new battery. I had taken an Omega pocket watch, cased in the USA by Elgin, in rolled gold, to a Horologist. He replaced the spring and serviced the watch. I asked him if he could get the pressed back off the guess watch. No problem he said, I will use a guillotine. Well he tried but could not get it off. I had tried other street vendors who also could not open it. So I took the watch home, got a thin screwdriver, and a light hammer, and tapped away. Its was the hardest back I had ever removed. I put the new battery in and put the watch on the cover press. There was no way it would go back on. I put some small cuts in the rim, but retaining its seal edge, and press fitted it, but it would not fully seat. I got a cloth and the light hammer and gave it a sharp tap. It seated. If a Horologist could not get it open, this old motor mechanic managed it.
It's hypnotizing to see you work. 🙂👍🏼
Thanks for letting us in this process.
Oh darn, you shattered my illusion! I've been telling myself that watch makers back then were travelling into the now to get supplies and design ideas...oh well wonderful work, beautiful pieces and very informative narrative. Thank you.
I really enjoy watching you display your skills. I realize that this is way beyond what I can do, but you have got me started on building my own clocks from 3D printed parts. I'm working on two designs now and having some success. Thanks for giving me a push
A fellow 3D printing enthusiast!, seriously considering starting to try and print one of those projects too, deffinitly need to fine tune my printer (an Anet A8) before trying though they look to be quite a challenge
@@UNSCPILOT Take a look at the ones I did. Woodwaker1 on you-tube
@@woodwaker1 nice work, cool to see them in motion, especially speeding along in high speed mode just to demonstrate how the gears work together, thinking I might try finding a more purely mechanical design even if it means I have little chance to fully regulate it, it would just give me an excuse to interact with the clock more often
Hi Marshall! I've listened to hundreds of episodes of LR back when I was into competitive Magic, and probably watched just as many events where you were in the booth. I found these videos' of yours by happenstance a few days ago, and have really enjoyed them as someone who knows next to nothing about watches. It's been a real blast from the past hearing your commentary style over this content, and I've loved every minute of it. I hope you get to keep doing what you love like this going forward!
Just want to say thank you, I was like that voice is insanely familiar and I couldn’t put it together. But the endless amount of PT GP and CFB content I’ve listened to.
@@jhynes4899 sorry what do those stand for?
@@samgould9930 PT = pro tour GP = grand prix cfb = channel fireball, all references to the man’s mtg (magic the gatherer casting and pro career
Another awesome video! It`s nice to see someone who is preserving history and appreciate the work that went into these time pieces!
I started the hobby of watch repair recently and I got a Waltham pocket watch from 1905 in and I got it running. It was great.
Very impressive filming and editing, not to mention those surgically steady hands moving all those tiny pieces around. I can only hope to make my channel as professional as yours someday. Keep up the great work!
The video is awesome, I really enjoy both the satisfaction of the restoration and the technical information, part description and all. This channel really got me into the hobby and even though I'm still in the beggining phase of learning and studying about what's going on in watches, It really makes me wonder how people buy a watch that's actually worth the price you're paying for for repair. I went on ebay and it seems like most of the watches that are being sold are just ones that are really not worth to repair at all as it seems like they are being sold by experienced watchmakers who don't think it's worth it. If anyone's into the hobby and would like to give me some tips on how to not get scammed or make stupid purchases, feel free to share!
Your inclination is correct, you have to be very selective about which ones you go for
So peaceful watching these videos. Something I would have loved to take up as a hobby. Beautiful to see an old piece like this being given some tlc.
I came here from limited resources. I’m a newbie watch guy but mostly checked out the channel due to me loving your mtg content.
I say this not condescendingly but I’m so pleasantly surprised at how successful and popular your channel here has become.
I’m LOVING this, just like your limited resources content this is supreme craftsmanship.
You are a great role model.
for case back dent removal; delrin rods in a variety of diameters, lightly round the edges a bit, lightly tap rod into the case back with a soft face jewelers hammer (either the nylon or the brass side, doesn't matter. you're touching the case with the delrin, not the hammer). you may wind up with a variety of rounded ends for various use cases, but thems the breaks.
side note; delrin ain't crazy cheap. nylon works, but tends to mushroom faster.
and for those who don't have the bits before hand, or want to stay on the low cost side, yeah rounded toothbrush handles can do the job too hah.
hard wood has worked well for a few centuries also. :)
I was wondering if the crystal press could do the job also.
Thanks, I'll look for that
I’ve watched for some time now. And now I’m comfortable to ask. With everything being so precise and so delicate like the balance, is there a specification where the screws should be torqued as to not over tighten? Would over tightening screws or not enough tightening would cause the watch to run faster or slower?
From what i've learned watching this channel, I would guess not. The screws only serve to fix the bridges to the body of the movement. The metal faces would touch eachother, and while it's technically true that the clamping force would compress the metal itself a little bit, in this case (with the thickness of the metal and the low clamping force) the effect that loose/tight screws have would be neglible. The important thing is the location of the jewels, which have a through hole in them. With the bridges screwed down and the metal faces touching, the height of those jewels wouldn't change. And with a bit of wiggle room, that the pivot/axis is slightly smaller than the distance between the upper and lower jewel, it would be fine independent of the tightness of the screws.
What would be more important I guess is the side to side location of those jewels. Screws in themselves don't act as a particularly effective locating feature. When almost screwed down, such machine screws (with a flat bottom) allow for some side to side motion, since the screw thread isn't the exact size of the hole it is in. Therefore there are locating pins on the underside of every bridge. These pins fit inside precision holes in the body of the movement with a tight tolerance, which makes sure that the jewels are in a precise location.
I'm just starting on this journey, and no, you won't affect the movement when you tighten the screws. The bridges have locating pins and stand-offs to position the bridge perfectly. For wheels that are directy held by screws (ratchet wheel and crown wheel) then the screws have a shoulder to prevent any pressure on the wheel. If a wheel doesn't turn freely after fixing the screw, then it means you used the wrong screw. Really cheap movements made of sheet metal (US Time, Timex etc.) might be a little more sensitive to how you put things together, but they are not normal movements and usually are much harder to work on. In fact, they were never really meant to be worked on or repaired but you can if you are good enough. See Marshal's Mickey Mouse Watch service video.
As far as how tight, just finger tight so it is just firm is enough. Most of these threads are a small fraction of a millimetre thick. You don't go torquing anything this tiny. You very quickly get a feel for what is correct.
Contrary to what others say, Yes. Over tightening or under tightening screws, for example yhe screw that holds the balance cock in place, the tighter you torch that screw, the tighter your sandwiching the wheel/ gear that that cock/bridge is holding. So it is possible to overtighten screws. Especially the bridge or cock screws. Over tightening the balance cock screw, could put to much pressure on the balance wheel, which in turn could lead to poor amplitude, or in some cases, even stop the watch from running
The saying I've heard is tight is right, too tight is two pieces.
There aren't any specifications for torque on screws like this, but usually you screw them down until they resist, and then go just a bit more, like 1/8th of a turn, and you'll feel when it's set. And no you can't really affect the timekeeping of the watch with how much you screw down the screws. It's more that if you don't do it enough it could back out, and if you do it too much it could shear off.
Just wow. Your narration is so captivating. I just thought about skipping through just to see how a watch is assembled but ended up watching the whole thing! Thanks!
This is like an adventure every time. Seeing the watch come back together and run beautifully is exciting. Your channel got me really into watches! Thanks for the awesome content.
Very beautiful movement - I love the spiral patterns ground into the ratchet and crown wheels. It's truly amazing to see something so beautifully designed and originally fabricated come back to life. Thank you for sharing!
WOW!!! Just simply amazing to “watch”, especially the two jewels with mini-screws with one having a divot in the center. Outstanding work!
I love the way you describe the way a watch works; it was absolutely beautiful.
What a nice story and cleanup. I so agree with you - Don’t over restore!
I'm really fond of these old watches. Thank you for this!
I really enjoy how you keep it moving with no lag time.
Beautiful. Lubricating old moving parts is the most satisfying thing.
I’m always so amazed how well they were made back then. So nicely and precise manufactured. Just discovered your channel and love it. And as a magic player I love to see the magic play mat in every video
my family is in possession of my great grandfathers elgin pocket watch which dates to 1890. It's in fantastic shape and still runs!
Thank you been collecting pocket watches for years, nice to see someone take one apart.
I have always loved mechanical stuff like this. The moving parts like the gears and springs look so cool.
Hey Marshall, I only found your channel recently and I've fallen in love with your videos, they're so relaxing to watch and your way of narrating over the top as if you were actually doing it at the time is just superb. On a different note, having watched quite a lot of your older videos and now some of your new ones within a short period of time, I can confirm that you are many times better at regulating oil in your latest videos than you were in your older ones. Can't wait for your next vids!
Great job, You have sympathetically restored it and not over restored it, which in my mind is the correct way to restore any antique, the wear and tear is it’s history, Great Job Again 👍 Paul from 🏴 🇬🇧
What a beautiful little piece of fine-tuned machinery. It's rather refreshing and relaxing to watch the inner workings of something as simple as a pocket watch and admire the detail and precision we were capable of back in those days, back when things were manufactured with real craftsmanship and durability.
Thanks for the awesome video!
Beautifully restored. You did all right stuff to this one and nothing more.
You make it look so easy. I very much enjoy watching and listening to your work.
I grew up and live in Elgin Illinois very close to where the old watch factory used to be. Thanks for cleaning and showing off one of our watches! Morbid fun
fact-Clyde of Bonnie and Clyde had an Elgin Pocket Watch on him when he was killed lol
I look forward to each of these. Thanks so much!
Very impressive work! Watching you doing this was beyond cool. Thank you for sharing!
Marshall, you have such a soothing voice. I don't even care for watches but once I found your channel, I'm hooked. Such entertaining, relaxing videos that I thoroughly enjoy. 😃
The Bob Ross of watches. Same reason I keep watching pluss watches are awesome machines.
@@dmatula811 I agree. You hit the nail on the head. Thought I was the only one obsessed with his voice and diction. lol
Aw, thank you, I appreciate it :)
Excellent work! Thank you for this video. I have an 1850 pocket watch . Interestingly enough there are pieces of paper in outer case. They are in between pieces of material. Each paper was placed there when serviced by Greenwich watch company. Really nice to see repairmen so dedicated that they would leave info for next man working on watch. I would love for you to see it . Thanks again.
I like how you use the word "used" in such a loving manner, as you could actually use "love" as a substitute word; as in; "look how loved this watch was for so long". Good job. Makes me think the same when you see a well warn Bible, it didn't just sit in a book case or on a coffee table.
Love ya on Magic (came here because Day9 mentioned this channel), but this was absolutely amazing. Seeing a watch restored piece by piece is fascinating.
Feels like it's been forever. Love your channel. I've restored a 1906 Waltham pocket watch and a Bulova from 1965 since I got sucked in
I just got home after a tiring trek through the forest and seeing such a gorgeous pocket watch on this channel is just what i needed to watch while having a god rest
Agreed, some of the most relaxed yet entrancing channels I've ever watched, an entire hour can fly by and I don't even notice!
man, id almost want a clear back on a watch like that to see all the movements. I love old distressed antiques like this. Amazing, Thanks!!
So cool. I think this is the first video I've seen with you taking apart the balance. Thanks
very well done. My local watchmaker has worked on quite a number of Elgin pocket watches and they are pretty nice. Great to see a family piece restored, which would cost more than its value to have a retail watchmaker work on it. Sentimental value is important.
Applause. Beautiful. Lovely camera work as usual. Thank you.
I've been a big fan of your channel for a while. It's a beautiful pocket watch, an I think you did a beautiful job with it. I like your philosophy of respecting the history of the watch. Trying to make it look new would erase important things it's been through. As usual, thumbs up.
Mesmerizing work. Lovely!
Beautiful watch. Nice job. You’re a good teacher. As a toolmaker, really enjoy your channel and precise work.
what a brilliant video , i keep thinking that i am going to skip forward a bit but then realise that i have again watched the whole video , brilliant job on a gorgeous watch , you really are an artist with watches , thank you for the video .
I have been watching your videos for a while Marshall and they are fantastic! The patience and skill you have is great, and the way you explain everything makes the videos so polished and interesting. I have watched a few other channels that do similar but they are nowhere near as engaging to watch....looking forward to the next one already! many thanks
Thank you :) I appreciate that!
That's a brilliant job again Marshall.....and I agree totally about over restoration that watch has LIVED you want to see that
Awesome upload i am just starting out fixing old pocket watchs. I've fixed several old wrist mechanic watches and just ordered my first 1932 pocket mechanised watch 😀 can't wait for it to arrive.⌚
I am amazed at the patterning on the metal-work inside the watch. I doubt the owner would ever see it, just a watch repairer/restorer. My Uncle would have loved to have seen this. He had a watch repair shop and was always a busy boy!
Watching this makes me want to send you all of my grandpas old pocket watches, most of them wont even wind up anymore. My grandmother would love to see them working again.
Beautifully done restoration!
Being from Elgin, IL, I truly enjoy watch you work on Elgin Watches.
Now if I could just get people to stop "correcting" me on the pronunciation! lol
Well done. When I was in my early teens, I used to wish I was a boy so that I could have a pocket watch like my Grandfather. He would let me hold it and I would enjoy listening to the ticking. My oldest brother got the watch when he passed away. Still love the beauty of these watches. Thanks for sharing
I am so impressed by how they were able to craft these precision elements/mechanics so far back. Those small gears, with such detail, with the tech available then.
Great work as always. And you are so much fun to listen to. Thank you so much.
your speed and knowledge can be seen in progression of these videos just giving you a compliment for you progression
taking a hobby to the next level! i know nothing about watches or watch repair, but your videos are fantastic!
Hi Dave I see you won a prize, I too got this answer to my comment is it true or has Marshall's page been hacked.
@@jembo1959 no idea about prizes so somebody got hacked 😩
Like wise I just ordered a tool set for my new hobby! And I just picked up a 1925 copy of this movement, can't wait to get started and service alongside you Marshall! Thank you for the inspiration and wonderful videos.
Which mainspring winder do I need for this movement?
Very nice watch, thank you for sharing, Marshall
What a great story and beautiful watch. That was a really nice thing to do for a mate. Very good work.
Who would have ever thought that watch cleaning would be so satisfying. Thank you.
I have my great grandfathers pocket watch he carried with him during WW1. Its in rough shape, glass is broken into pieces. Does not run or wind up. Total basket case. But to me its invaluable. Just knowing that my great grandfather carried it during the entire duration of the war (He signed up at the outbreak of the war and by the end of it he was over in Egypt) makes it really special.
Thanks for sharing this outstanding work of art.
Love that you can see the history of that piece.