@@richardperrettwatchmaker Why didn't you try one of the many penetrating oils that are easily available at most hardware stores? It might've loosened that screw without breaking it.
@@richardperrettwatchmaker Ah Ha, I wondering about that.. It did seem very odd that both screws were jammed.. I looked closely at the view you made of the thread as it was attached to your drill bit upon removal. It did look like a normal Right Hand thread. I'll bet my Unitas 445 has the same issue. I wish you had mentioned your mistake in the video. Some of us need the education.
I am not someone who speaks English, but this type of video leaves me very calm. No shouting, no promotions or sponsors. Just a story behind an object that can be very common, but at the same time so complicated and beautiful.
You joined about when I did sounds like, around 1990? I retired in 2012 as a CW4 US Army!! LOVED ENGLAND!!! RAF Molesworth I spent two years at that assignment! Thank you for your service to your country!!
As a US Marine we were taught a little about the trench warfare in WWI. Nasty stuff, even for warfare. Thanks for bringing this great old watch back to life.
What an amazing restoration. So painful to watch those two screws break, but so good that you pulled through in the end. And such a heartwarming story about the family connection to the watch. Looking forward to your next video!
What a wonderful watch and survivor of the great war. Like most of the men that survived the horrors of WW1, it bares the scars. It tells a story without a voice, or words on a page. But now its heart beats again!
What a fabulous restoration of a piece of history. I couldn't believe it when both screws broke.. but you pulled it off and fabricated what was needed to make it work. A great job..and great piece of history....Kudos
The screw is a reverse thread (confirmed at 10:50), and you keep breaking it because you are torquing it tighter and tighter rather than unscrewing it.
I enjoy when you narrate the ways in which your past life informs your present life and I really think you achieved that better than ever in this particular video. Thank you for your service
Just beautiful. I had my dad's old WW2 Roamer - black dial with a hacking second hand. When I joined the Army I took it with me. Within six months it had been stolen. I never had the heart, nor the spare funds, to replace it, so I never did.
Thank you Richard, yet again, for another superb restoration. What a nightmare over the barrel arbour screw! Beautiful heirloom lovingly brought back to life, and a great story as well. 👏 👏 👏
Outstanding. Inspite of corroded lug being broken, resourcefulness is above par. A work of art and an honor of our fallen heroes. A remembrance of finest time simple watch making.
Thank you for another inspiring video. And not just your amazing watchmaking skills this time, but the heartwarming story of your wife’s grandfather really gave this restoration video a personal message. Thank you for sharing from a huge fan and a budding hobbyist.
A very lovely restoration, but I can't help but feel that due to the history of this fine old trench watch's family history, you ought to take it off the market and keep it as a family heirloom. Anyway, I was entranced with your restoration as was Billie my watchmaker daughter and we thank you for sharing this. Wishing you all the very best and God bless, Wendi 🌻
Hi Wendi ... I think I may have caused a little confusion here. My wife's grandfather did not own this watch it is merely an example of the type of watches these men wore in the trenches. I would not have been allowed to sell it had it been his and nor would I have wished to ... unless I was very hungry. I hope all is good with you and nice to hear from you as always. Richard
Good morning Mr. Richard. To me is a pleasure to watch your videos and listen to your stories, like this one. Thank you for this gift to us and congratulations for this well done job. Carlos from Brasil
❤Oh the pain! Your demeanor is wonderful Richard, as I'm sure 98% of us would have had expletives coming out at a decibel level the neighbours would have been proud of! Frustration 😡, dealing with 'micro' screw heads and threads when all you want to do is disassemble the movement to be able to clean the various components. OMG ! I would have been close to tears 😭. Still, you (as always) persevered to restore a piece of history and beautifully narrate your journey. I had to stop the video twice when the heads snapped off the first was unfortunate the second ? Well it was like watching a scary movie where you shout at the screen to tell the actor ; " Don't open the door! " I was the same! Question? As you were not using the other components would it have been possible to immerse the whole timepiece in some sort of penetrating lubricant for a length of time to maybe help? As always I thank you for your content and sharing of pain. It keeps it real , as with most skilled craftsmen like yourself the content can seem far too easy and for the Neanderthals like me who have no concept of the laborious work (including the drama) put in to each project. My sincere thanks and best wishes for transporting me to your workshop and allowing me to see what it's like when things do not go so smoothly. ❤
OMG!! What a fantastic video!! Best one yet restoring a watch that had been literally thru the war!! Such personal significance being it was your wife's Dad's piece. Couldn't believe that second screw broke. Your craftsmanship was great making that second screw. You can't beat that video Richard!! Thank you, you made my year. That watch is priceless!! Joe
I don't understand: The barrel arbour thread at 10:50 looks to me like a left handed thread and if it were a right handed thread, it would have been screwed in, not out by the drill going in the normal direction. But the new screw you made goes in right handed, am I missing something?
Hi Donald... The Ratchet Wheel turns clockwise and the crown wheel which drives it anticlockwise. The crown wheel screw has a reverse thread so as the rotation of the wheel does not serve to loosen it and vice versa for the ratchet wheel. This is the normal configuration... but your observations look correct to me so now I'm confused too. Whatever... it worked! Onward! Thanks for taking the trouble to make these observations. Much appreciated! Richard
You and I are of the same conclusion. The reason the broken screw turned out on the drill is it was turning it in the correct direction. The new screw went in probably with only a small bit of resistance because of a slightly smaller screw diameter and perhaps a slightly harder screw . I am only a hobbyist and have personally never encountered both the ratchet wheel and crown wheel being LH. But I have seen other watch repair videos where they were the same. There is no corrosion on the threads of the broken screw. I believe this movement was made by Adolf Schild (AS) should, with the movement #, be able to find the proper service sheet.
I know both the ratchet wheel and crown wheel screws are left handed when he broke off the first ratchet wheel screw. And when I see him try to unscrew the second the same way I already know he will break it again. Both crown and ratchet wheel screws being left handed is not that uncommon, it may not make sense but thats the way they made it. So two important things to remember here even for the professional, 1. In watchmaking if you have to force something more than you normally have to you are doing it wrong; 2. Ratchet wheel screw can be left handed.
Yes well observed. After the second head came off I had my suspicions but seeing the thread up close at 10:50 left no remaining doubt in my mind. I have found to my cost that HMT movements often use this double left hand system. I am absolutely positive that it was an honest mistake but alarm bells really should have started ringing when he tried to get a right hand screw into the arbor. We all make mistakes and this could have provided the viewers with an excellent example of the pitfalls of watchmaking. Instead I felt that it was just glossed over in an otherwise excellent video.
Hi JB Maximus... Such a nice comment to receive! Maybe you yourself are evidence that if I don't have the most subscribers I do at least have a great many of the right kind. Much appreciated. Richard
I truly inspired this masterpiece. One year to wait to complete is a lot of patience. Congratulations for your great restoration. Best regards, From Philippines
I can't believe you didn't know that several old movement like that have a left screw also on the ratchet wheel. When I find a particularly stuck screw I always try both directions, it also helps to untigth any screw
Thank you for uploading this great new video, my friend! Please, keep doing these wonderful documentaries! They're very interesting treats for us all! Cheers form Italy.
Fabrizio!!! Good to hear from you my friend and so pleased you enjoyed this one! I am missing Italy ... I need some gelato in a sun baked square surrounded by beautiful architecture and and with the promise of a delicious pasta supper. Hope all is well with you. Richard
@@richardperrettwatchmaker Thank you Richard! If you will fly here, please let me know! Expecially if you'll plan to spend some time in the northern side of our peninsula. I'll be happy to bring you to a place for the best gelato of your life! I'm doing fine, thank you for asking, and I hope the very same for you. You're doing a great job, about 84k subscribers and growing! Wow! Keep up the great work!
The screw that came out of the arbor appears to have been LH ? I am a retired gunsmith worked for 40 years on English, Continental and American shotguns (primarily) . Stuck screws /pins are not uncommon. I found that heat (in excess)often altered the heat treatment and could result in broken screws. Light heat in conjunction with a fine penetrating oil like Kroil and allowed to sit for a day or two would sort out the problem. Cold applied by liquid directly to the screw, Such as wart remover (available in most pharmacies) or liquid nitrogen will cause the screw to shrink slightly breaking the corrosive bond and allowing easy removal of the screw and not alter the temper of the screw. I usually found high heat to be a last resort. Love your videos and really liked this one.
Hi sportclay1, I wondered about using a wart remover but could not find anyone else using that technique. Theoretically it makes a lot of sense. Haha! And I am now totally confused about the screw thread direction! Great feedback Much appreciated. Richard
@@richardperrettwatchmaker I got really curious about the dual LH threads on both Crown and Ratchet wheels. This is an Adolph Schild movement and while I can't make out the movement number on the donor movement I did find a number of Shild movements from this time period and many from trench watches. Parts lists show most all have LH threads on both wheels. Learn something every day. Glad you saved the watch.
@@sportclay1 Yesterday I was working on a tiny Swiss lady's movement and, lo and behold, both the ratchet and crown wheels were reverse threaded. I spent over an hour trying to gently coax the ratchet screw loose, then tried turning in the other direction and ... SUCCESS! Really threw me for a loop, but I guess it's not that uncommon.
Interesting old watch !! Of course sometimes it’s been a long time to complete some !! Patience is the key for all that you’ve done including waiting for a missing part ! Final result in so satisfying ! Thanks Mr. Richard to sharing !!
Fabulous job, pleased you didn't remove the dinks from the case just looks right as is. Terrific little lathe, impressive screw making when you can hardly see it. Just done a peseux 320 with the same setup for the balance and it took days to steel myself to clean the capstone.
Hi Phil, yes the case looks good I think with the damage to it. And the 6mm lathe is pretty helpful for such an old tool. Thanks for the feedback, Richard
I realized my toes were curling up as you tried to loosen that screw. And when it broke I realized I was too emotionally involved. Great video and a beautiful result.
Interesting watch and story. My grandfather was in the machine gun corps and also survived. My late father spent time trying to trace which battles his father had fought in, but the records were destroyed, I think by a bomb in WWII. Thanks for the revelations.
Thank you for your excellent video. It is nice when you know the history of the piece you are working on. I also loved seeing the Lorch lathe in action and how you made the new screw. All the best, Norm in Arizona
Thanks so much Norm. I am sat in a sunny garden with the watch keeping good time on my wrist. Glad you liked to see the old Lorch in action. Greetings to you sir in Arizona from Wales! Richard
A beautiful piece, great watchmaking, and a wonderful story! Thank you! And yes the watch you were wearing is very interesting, especially to a guy from "across the pond" !
Another brilliant restoration Richard, well worth the 1 year wait for a satisfying end result. Good old bicarb, salt & tinfoil , my Gran showed me that trick for cleaning up silver. Don't suppose you put a thread- pitch gauge on that screw it would be interesting to see what it was ? Love the back story , another compelling video, thanks for sharing with us Richard.
@@richardperrettwatchmaker if you were ever around 26 regt RA then probably. Literally stumbled on the video after watching previous watch videos. They are addictive ha ha
Thanks for such very good restoration of old watch . Same movement was utilised under the name in dial -“East India watch company “ & watches were sold in the market as that watch with the same movement with above name & Roman figured is with me & working
In the USMC I worked on F4-S Phantom II Ejection Seats. (British Martin-Baker Mark II Ejection Seats.) Our old saying was, "If you have to hit it with a hammer, you are doing it wrong." 🦅🌎⚓
Hi David ... So pleased this was helpful and you enjoyed it. Thanks for taking a moment to say so and greeting to sunny spain from rainy Wales! Richard
@@richardperrettwatchmaker Richard I have to said you are huge inspiration. I started to discover Horology in the block down because covid and I'm learning and enyoining since then. The courious thing is I know all the parts of a watch in english because there is no youtube channel of this subject in spanish so....i'm thinking serously to start mine own channel. I'm just a hobbiest, but I just love this amazing world of the watches and want to share whit other people. Greetings from Hell ( Seville)
My Grand Father was a Quarter Master on WW1. He survived 5 major campaigns. I have his medals, but no watches. Btw... American Army.. great videos here
Hi Stephen ... Your Grandfather went through some tough times for sure sir! So good that you have his medals and thank you so much for taking a moment to share this story. Richard
Love your videos. On this video I felt your pain when that screw broke. I'm trying to restore one of my Father's watches, a Bulova from 1953. However when I was removing the screw, it broke just like yours did.
You might try soaking the top of the screw with WD40 and then setting the entire movement in the freezer. Materials tend to shrink in cold, expand in heat. This approach has worked for me.
Before applying heat and percusive maintenance to a stuck screw apply a solution of acetone and dextron II automatic transmission fluid for a few days.
Hi Bryan... Thank you. Great to get feedback on the historical stuff and yes Gilbert certainly was in the thick of it for years and years. Not sure I know of a more difficult scenario in which to serve. Thanks again. Richard
Good video, I love Horology! But what caught my ear was I served on the same operations as you, Granby with 7 Bde and Grapple 3. Maybe we met, I like to think so! Keep up the good work whatever!
Hi Haik ... A left hand thread on the ratchet wheel which turns clockwise is dodgy design ... but I agree with you! The evidence is stacking up that this was the case. Anyway, it made for a more interesting video I guess! Onward! Richard
Interesting watch repair and restoration!. I noticed there were no jewels in the movement. Thanks also for that interesting history of Gilbert Hudson: I always think the keys to overcoming adverse conditions in any field are patience and courage.
Perfectly restored, and perfectly narrated, this video is one of my favorites Richard !
Hi Guys! I just seen one of your videos with 15M views... Congratulations! And... I have the JLC dial now... Will mail a few images very soon! Richard
@@richardperrettwatchmaker Thank you Richard, you deserve just as much, if not more! Thanks for the images, can't wait to see it, have a good weekend!
@@richardperrettwatchmaker Why didn't you try one of the many penetrating oils that are easily available at most hardware stores? It might've loosened that screw without breaking it.
Hi Autodidact .... I did off camera and it made no difference ... but then I was turning the screw the wrong way! Ooops! Richard
@@richardperrettwatchmaker Ah Ha, I wondering about that.. It did seem very odd that both screws were jammed.. I looked closely at the view you made of the thread as it was attached to your drill bit upon removal. It did look like a normal Right Hand thread. I'll bet my Unitas 445 has the same issue. I wish you had mentioned your mistake in the video. Some of us need the education.
I am not someone who speaks English, but this type of video leaves me very calm. No shouting, no promotions or sponsors. Just a story behind an object that can be very common, but at the same time so complicated and beautiful.
You joined about when I did sounds like, around 1990? I retired in 2012 as a CW4 US Army!! LOVED ENGLAND!!! RAF Molesworth I spent two years at that assignment! Thank you for your service to your country!!
As a US Marine we were taught a little about the trench warfare in WWI. Nasty stuff, even for warfare. Thanks for bringing this great old watch back to life.
What an amazing restoration. So painful to watch those two screws break, but so good that you pulled through in the end. And such a heartwarming story about the family connection to the watch. Looking forward to your next video!
Great feedback Jeff! Thank you so much. Much appreciated. Richard
What a wonderful watch and survivor of the great war. Like most of the men that survived the horrors of WW1, it bares the scars. It tells a story without a voice, or words on a page. But now its heart beats again!
What a fabulous restoration of a piece of history. I couldn't believe it when both screws broke.. but you pulled it off and fabricated what was needed to make it work. A great job..and great piece of history....Kudos
The screw is a reverse thread (confirmed at 10:50), and you keep breaking it because you are torquing it tighter and tighter rather than unscrewing it.
I enjoy when you narrate the ways in which your past life informs your present life and I really think you achieved that better than ever in this particular video. Thank you for your service
Hi Brian so pleased you enjoyed this and thank you for such supportive feedback. Much appreciated! Richard
Just beautiful. I had my dad's old WW2 Roamer - black dial with a hacking second hand. When I joined the Army I took it with me. Within six months it had been stolen. I never had the heart, nor the spare funds, to replace it, so I never did.
Thank you Richard, yet again, for another superb restoration. What a nightmare over the barrel arbour screw! Beautiful heirloom lovingly brought back to life, and a great story as well. 👏 👏 👏
Outstanding video! What an amazing journey that watch has had. As always it is a joy to see you do your work. Your own watch is also pretty sharp!
Outstanding. Inspite of corroded lug being broken, resourcefulness is above par. A work of art and an honor of our fallen heroes. A remembrance of finest time simple watch making.
Thank you for another inspiring video. And not just your amazing watchmaking skills this time, but the heartwarming story of your wife’s grandfather really gave this restoration video a personal message. Thank you for sharing from a huge fan and a budding hobbyist.
Hi Andy... Great feedback and much appreciated! Thank you so much. Richard
I work in heavy industry (mining). So very pleased to see you got the, hammer upon then add fire, protocol correct.
Richard, you my friend are the epitome of class and skill in watch repair. Great work as always!
Thank you so much Wes! Great to hear from you sir! Richard
Beautiful watch. I’m glad you were able to give it new life and keep it as original as possible. Thank you for sharing your skills with us.
Very good job. I cant even begin to imagine what those poor boys went through. Well done
Wow. End product looks fabulous
Richard, are you able to tell us the fluid you use in the ultrasonic cleaner?
Nicely done work, as always, Richard!
A very lovely restoration, but I can't help but feel that due to the history of this fine old trench watch's family history, you ought to take it off the market and keep it as a family heirloom. Anyway, I was entranced with your restoration as was Billie my watchmaker daughter and we thank you for sharing this. Wishing you all the very best and God bless, Wendi 🌻
Hi Wendi ... I think I may have caused a little confusion here. My wife's grandfather did not own this watch it is merely an example of the type of watches these men wore in the trenches. I would not have been allowed to sell it had it been his and nor would I have wished to ... unless I was very hungry. I hope all is good with you and nice to hear from you as always. Richard
Dang! Brother, I'm really glad you put that old soldier back in service. Beautiful...
Good morning Mr. Richard. To me is a pleasure to watch your videos and listen to your stories, like this one. Thank you for this gift to us and congratulations for this well done job. Carlos from Brasil
❤Oh the pain! Your demeanor is wonderful Richard, as I'm sure 98% of us would have had expletives coming out at a decibel level the neighbours would have been proud of!
Frustration 😡, dealing with 'micro' screw heads and threads when all you want to do is disassemble the movement to be able to clean the various components. OMG ! I would have been close to tears 😭.
Still, you (as always) persevered to restore a piece of history and beautifully narrate your journey.
I had to stop the video twice when the heads snapped off the first was unfortunate the second ? Well it was like watching a scary movie where you shout at the screen to tell the actor ;
" Don't open the door! " I was the same! Question? As you were not using the other components would it have been possible to immerse the whole timepiece in some sort of penetrating lubricant for a length of time to maybe help?
As always I thank you for your content and sharing of pain. It keeps it real , as with most skilled craftsmen like yourself the content can seem far too easy and for the Neanderthals like me who have no concept of the laborious work (including the drama) put in to each project.
My sincere thanks and best wishes for transporting me to your workshop and allowing me to see what it's like when things do not go so smoothly.
❤
That watch was destined to find you. Beautifully restored and a beautiful back-story.
OMG!! What a fantastic video!! Best one yet restoring a watch that had been literally thru the war!! Such personal significance being it was your wife's Dad's piece. Couldn't believe that second screw broke. Your craftsmanship was great making that second screw. You can't beat that video Richard!! Thank you, you made my year. That watch is priceless!! Joe
Great feedback Joeseph! I shall certainly try and beat it so stay turned! But thank you for such postivr feefback it is very much appreciated. Richard
@@richardperrettwatchmaker was so wonderful to watch that, was on the edge of my seat. Truly great stuff!!
I thought the modern watches were more complex and smaller in terms of pieces, but this watch shocked me.
I don't understand: The barrel arbour thread at 10:50 looks to me like a left handed thread and if it were a right handed thread, it would have been screwed in, not out by the drill going in the normal direction. But the new screw you made goes in right handed, am I missing something?
Hi Donald... The Ratchet Wheel turns clockwise and the crown wheel which drives it anticlockwise. The crown wheel screw has a reverse thread so as the rotation of the wheel does not serve to loosen it and vice versa for the ratchet wheel. This is the normal configuration... but your observations look correct to me so now I'm confused too. Whatever... it worked! Onward! Thanks for taking the trouble to make these observations. Much appreciated! Richard
You and I are of the same conclusion. The reason the broken screw turned out on the drill is it was turning it in the correct direction. The new screw went in probably with only a small bit of resistance because of a slightly smaller screw diameter and perhaps a slightly harder screw . I am only a hobbyist and have personally never encountered both the ratchet wheel and crown wheel being LH. But I have seen other watch repair videos where they were the same. There is no corrosion on the threads of the broken screw. I believe this movement was made by Adolf Schild (AS) should, with the movement #, be able to find the proper service sheet.
I know both the ratchet wheel and crown wheel screws are left handed when he broke off the first ratchet wheel screw. And when I see him try to unscrew the second the same way I already know he will break it again. Both crown and ratchet wheel screws being left handed is not that uncommon, it may not make sense but thats the way they made it. So two important things to remember here even for the professional, 1. In watchmaking if you have to force something more than you normally have to you are doing it wrong; 2. Ratchet wheel screw can be left handed.
Yes well observed. After the second head came off I had my suspicions but seeing the thread up close at 10:50 left no remaining doubt in my mind. I have found to my cost that HMT movements often use this double left hand system. I am absolutely positive that it was an honest mistake but alarm bells really should have started ringing when he tried to get a right hand screw into the arbor. We all make mistakes and this could have provided the viewers with an excellent example of the pitfalls of watchmaking. Instead I felt that it was just glossed over in an otherwise excellent video.
Thoroughly enjoyed that Richard. Your efforts to get that barrel arbor off! ...and then the screw head broke....Oh my!
Hi Station Plaza ... very good to hear from you. Yes it the watch did not make it easy for me. thanks for the feedback. Richard
Lovely video! Another quality restoration which I'm sure means a lot to you and your family.
This Video deserves support more than others because of its suffering for years
I wish Richard had more subscribers. He does such outstanding work and is entertaining. I watch every video he makes. Two thumbs up.
Hi JB Maximus... Such a nice comment to receive! Maybe you yourself are evidence that if I don't have the most subscribers I do at least have a great many of the right kind. Much appreciated. Richard
Thank you for giving the life back to this watch.
Amazing work!
Your tone of respect was spot on. Well done. Good repair as well.
Beautiful watch and how better to spend the day with your grandchildren. Thumbs up all the way!
What a great thing to do and an outstanding restoration. You would be proud to wear such a watch Steep In history .
I truly inspired this masterpiece. One year to wait to complete is a lot of patience. Congratulations for your great restoration.
Best regards,
From Philippines
I can't believe you didn't know that several old movement like that have a left screw also on the ratchet wheel. When I find a particularly stuck screw I always try both directions, it also helps to untigth any screw
Thank you for uploading this great new video, my friend! Please, keep doing these wonderful documentaries! They're very interesting treats for us all! Cheers form Italy.
Fabrizio!!! Good to hear from you my friend and so pleased you enjoyed this one! I am missing Italy ... I need some gelato in a sun baked square surrounded by beautiful architecture and and with the promise of a delicious pasta supper. Hope all is well with you. Richard
@@richardperrettwatchmaker Thank you Richard! If you will fly here, please let me know! Expecially if you'll plan to spend some time in the northern side of our peninsula. I'll be happy to bring you to a place for the best gelato of your life! I'm doing fine, thank you for asking, and I hope the very same for you. You're doing a great job, about 84k subscribers and growing! Wow! Keep up the great work!
Great video. I was surprised at how nice the dial looked after so many years. Thank you
The screw that came out of the arbor appears to have been LH ? I am a retired gunsmith worked for 40 years on English, Continental and American shotguns (primarily) . Stuck screws /pins are not uncommon. I found that heat (in excess)often altered the heat treatment and could result in broken screws. Light heat in conjunction with a fine penetrating oil like Kroil and allowed to sit for a day or two would sort out the problem. Cold applied by liquid directly to the screw, Such as wart remover (available in most pharmacies) or liquid nitrogen will cause the screw to shrink slightly breaking the corrosive bond and allowing easy removal of the screw and not alter the temper of the screw. I usually found high heat to be a last resort. Love your videos and really liked this one.
Hi sportclay1, I wondered about using a wart remover but could not find anyone else using that technique. Theoretically it makes a lot of sense. Haha! And I am now totally confused about the screw thread direction! Great feedback Much appreciated. Richard
@@richardperrettwatchmaker I got really curious about the dual LH threads on both Crown and Ratchet wheels. This is an Adolph Schild movement and while I can't make out the movement number on the donor movement I did find a number of Shild movements from this time period and many from trench watches. Parts lists show most all have LH threads on both wheels. Learn something every day. Glad you saved the watch.
@@sportclay1 Yesterday I was working on a tiny Swiss lady's movement and, lo and behold, both the ratchet and crown wheels were reverse threaded. I spent over an hour trying to gently coax the ratchet screw loose, then tried turning in the other direction and ... SUCCESS! Really threw me for a loop, but I guess it's not that uncommon.
Interesting old watch !! Of course sometimes it’s been a long time to complete some !! Patience is the key for all that you’ve done including waiting for a missing part ! Final result in so satisfying ! Thanks Mr. Richard to sharing !!
Fabulous job, pleased you didn't remove the dinks from the case just looks right as is. Terrific little lathe, impressive screw making when you can hardly see it. Just done a peseux 320 with the same setup for the balance and it took days to steel myself to clean the capstone.
Hi Phil, yes the case looks good I think with the damage to it. And the 6mm lathe is pretty helpful for such an old tool. Thanks for the feedback, Richard
Wow what a transformation! The stories that watch could tell!
Thank you Richard for another great video.
All the best Darren 🙂
Thanks so much Darren and good to hear from you.! Richard
What perseverance you have shown, nothing but respect!
I realized my toes were curling up as you tried to loosen that screw. And when it broke I realized I was too emotionally involved. Great video and a beautiful result.
Hi Mike! Haha! Good to hear that you were so engaged and invested in this one! Great feedback and much appreciated! Richard
Interesting watch and story. My grandfather was in the machine gun corps and also survived. My late father spent time trying to trace which battles his father had fought in, but the records were destroyed, I think by a bomb in WWII. Thanks for the revelations.
This was an extra special Cool one .😎 Neat revelations. No worries no spoilers. Good Stuff lovely story. 🙏
Great video sir! I'm very grateful for your respect towards these old warriors. Today's generation have no idea of what they did.
Thank you for your excellent video. It is nice when you know the history of the piece you are working on. I also loved seeing the Lorch lathe in action and how you made the new screw.
All the best,
Norm in Arizona
Thanks so much Norm. I am sat in a sunny garden with the watch keeping good time on my wrist. Glad you liked to see the old Lorch in action. Greetings to you sir in Arizona from Wales! Richard
Curious. Is there a brand name anywhere on the watch?
The finished project is beautiful. Personally love sterile dials.
being in the American Army we served in the same places at the same time I salute you Sir great job
Another great video, I love the personal stories you add into them!
Thanks JSG Watches! Guys ... go check out JSG Watches ... some really great photography and watchmaking there! Richard
I loved this video! I follow you since the beginning and I enjoy each one always! I really like to listen to your comments. Cheers!
Hi Lee .... thank you so much for your support for so long with the channel! Much appreciated! Richard
A beautiful piece, great watchmaking, and a wonderful story! Thank you!
And yes the watch you were wearing is very interesting, especially to a guy from "across the pond" !
Great feedback Steven! Much appreciated! Richard
Well done, sir! Looks fantastic!
Thank you for your service, great restoration
I was right - another beauty. Thanks Richard.
Thanks Mark... Good to hear from you! It was a troublesome watch for sure! But it turned out nice right? Richard
Wow, great work on the case and mainspirng screw, hats off for you sir....always enjoy your videos
Another brilliant restoration Richard, well worth the 1 year wait for a satisfying end result. Good old bicarb, salt & tinfoil , my Gran showed me that trick for cleaning up silver. Don't suppose you put a thread- pitch gauge on that screw it would be interesting to see what it was ? Love the back story , another compelling video, thanks for sharing with us Richard.
Great feedback Simon. Thanks so much. Much appreciated. Richard
my Dad also served in the Gulf and in Bosnia. great Job man,.
Thanks Batmon1! Small world ... I wonder if I was ever with him anywhere! Great feedback, much appreciated. Richard
@@richardperrettwatchmaker if you were ever around 26 regt RA then probably. Literally stumbled on the video after watching previous watch videos. They are addictive ha ha
When you have to start making your own screws, it's serious. Thanks for persevering with this beautiful piece of history Richard. Cheers, Howard
Thanks for such very good restoration of old watch . Same movement was utilised under the name in dial -“East India watch company “ & watches were sold in the market as that watch with the same movement with above name & Roman figured is with me & working
That was a video to treasure Richard.
Thank you for sharing it sir 🇬🇧
Thank you so much Ray and thank you for taking a moment to say so. Richard
Thanks for your service!
In the USMC I worked on F4-S Phantom II Ejection Seats. (British Martin-Baker Mark II Ejection Seats.) Our old saying was, "If you have to hit it with a hammer, you are doing it wrong." 🦅🌎⚓
Beautifull work. I always learn something new whith you. Thanks from Spain
Hi David ... So pleased this was helpful and you enjoyed it. Thanks for taking a moment to say so and greeting to sunny spain from rainy Wales! Richard
@@richardperrettwatchmaker Richard I have to said you are huge inspiration. I started to discover Horology in the block down because covid and I'm learning and enyoining since then. The courious thing is I know all the parts of a watch in english because there is no youtube channel of this subject in spanish so....i'm thinking serously to start mine own channel. I'm just a hobbiest, but I just love this amazing world of the watches and want to share whit other people.
Greetings from Hell ( Seville)
Magnificent, well done sir. Another watched saved from the past,
Thanks Mini Cooper... Great to hear from you! Richard
5:38 I ran into this myself where the mainspring arbor was reverse threaded. :(
My Grand Father was a Quarter Master on WW1. He survived 5 major campaigns. I have his medals, but no watches. Btw... American Army.. great videos here
Hi Stephen ... Your Grandfather went through some tough times for sure sir! So good that you have his medals and thank you so much for taking a moment to share this story. Richard
Love your videos. On this video I felt your pain when that screw broke. I'm trying to restore one of my Father's watches, a Bulova from 1953. However when I was removing the screw, it broke just like yours did.
YOU JAMMY B'STARD! Well done, Richard!
You might try soaking the top of the screw with WD40 and then setting the entire movement in the freezer. Materials tend to shrink in cold, expand in heat. This approach has worked for me.
Thats good advice. Heat is more for nuts and bolts. Can't tell you how many screws I've gotten out with WD40 or Triflow, fantastic solvents.
Wow a Fantastic Job you did there👍👌😊
Very nice watch 👍👌
Before applying heat and percusive maintenance to a stuck screw apply a solution of acetone and dextron II automatic transmission fluid for a few days.
Love the date shift of the photo by your wife to 1984 :) Another amazing job. Thanks, Richard!
Haha! Funny right!? Richard
A beautiful watch and such a beautiful work !
Lovely restoration once again Richard.
Thanks so much Rod! Richard
Superb work. Very enjoyable video too.
Thanks Cherry Brandy ... good to hear from you! Richard
Il fait preuve de respect autant pour son propriétaire que pour sa montre ! J'apprécie grandement !
Merci! Excellent retour ! Je vous remercie d'avoir pris le temps de faire ce commentaire. Richard
Good stuff Richard. Really enjoyed the historical narrative. Gilbert must have been brave beyond belief.
Hi Bryan... Thank you. Great to get feedback on the historical stuff and yes Gilbert certainly was in the thick of it for years and years. Not sure I know of a more difficult scenario in which to serve. Thanks again. Richard
Great content brilliant to watch.
Thank you for your service👌
The watch is absolutely smashing!
Thanks for sharing your experiences also, cheers 👍🏾 💙💛
My pleasure nevamin68 T! Thank you for taking a moment to give some feedback! Richard
A master at work......
left-hand thread.Happened to me with the ratchet wheel too
I think you might have done a few of these before...
Excellent result.
Hi Ron... One ot two! Thanks for the feedback. Richard
Such a nice piece. Another truly enjoyable video. Thank you!
Thank you so much Mike! Richard
Good video, I love Horology! But what caught my ear was I served on the same operations as you, Granby with 7 Bde and Grapple 3.
Maybe we met, I like to think so! Keep up the good work whatever!
Brilliant job on a lovely time piece.
Beautiful!!!! 👍👍👍
just an awesome video Richard.
If you look at 4:49 the screw did rotate about 5°, That is it is reverse thread.
Hi Haik ... A left hand thread on the ratchet wheel which turns clockwise is dodgy design ... but I agree with you! The evidence is stacking up that this was the case. Anyway, it made for a more interesting video I guess! Onward! Richard
I love the connection to your wife: As Time Goes By!
I love luxury watches, but it's hard to beat a trench watch when you really want to make a statement. Gorgeous piece of history!
Very sweet project Rich. I also bought a replacement movement for my Tissot. But unlike you who only needed two, I replaced the whole lot.
Hi Mike ... very pleased you enjoyed this and it was a nice project I agree! Thanks again. Richard
Difficult mission and great finish. Congratulations Richard and thank you very much for yours excellent videos!.
Hi Eloy... Good to hear from you! Yes, this one was tricky for sure. But got there in the end! Hope all good with you! Richard
@@richardperrettwatchmaker you are a very good person, Richard, thank you for your job, it's a pleasure see you working, is the true.
Muy buen trabajo, pero no me queda claro lo de trinchera, que tiene de particular, para ser un reloj de trinchera?
Interesting watch repair and restoration!. I noticed there were no jewels in the movement. Thanks also for that interesting history of Gilbert Hudson: I always think the keys to overcoming adverse conditions in any field are patience and courage.