8:44 daaamn that crisp trigger reset is just 😘, also congrats on being the only airsoft youtuber who practices trigger control so we can actually hear that reset instead of just jerking the bang button like all the others.
I wouldn't recommend janking the stock out of the deflector hold but rather lightly bending it upwards until it clears the hook. Even the real army version had soldiers breaking the deflector out or cracking the body. And unlike the army you will not get a free replacement body after some muddy physical exercises.
Show us internals ? Full auto grouping ? I know you need to sell these, and I will buy this V2 ( or is V3 already ? ), even though I have V1 version of this G36, but I would love to know what were actually improved from the previous version as well.
are the locking lugs on the mags still flimsy? broke most of mine on my 6 mags in a matter of weeks without rough handling. i had the first run of the vfc g36 gbb (non c). maybe the material is better now?
I'm not a VFC GBBR fan because they are always out of stock. It's cool that they make so many models but if they made more than 7 of each gun it would be better. Except for the HK416 A5, that seems to be available everywhere. I wonder why.
The fourth hole has no use. The machine that drills the holes always drills two holes at the same time and therefore there are four holes because the manufacturing process cannot do otherwise.
@@maximilian2680 Thanks for the reply, but arnt the stocks on the real gun injection molded? Maybe there was going to be a 4th pin, but HK already made the molds.
Unfortunately the first batch were pre-ordered and all taken. More to come later. www.redwolfairsoft.com/umarex-g36c-airsoft-gbbr-new-version-0-1-2-f-by-vfc.html
The gun is milspec as well. ares will not fit. But soon there will be IDZ handguards with hkeys holes and ris (airsoft) you can put rail on the standard handguard as well
I'm translating from Japanese to English with Google Translate. VFC/UMAREX is equipped with a G36 series MOSFET and is looking for an AEG that can also do a 2-point burst...... It's only modeled up with ARES products. I don't like the AR-15/M4 series all the time. And I like G36 more than HK416. Certainly, even if the reality of the gimmick is inferior to GBBR, some people want it to be UMAREX license AEG. ( Of course, including myself) VFC/UMAREXにはG36シリーズのMOSFET搭載、2点バースト射撃もできるAEGを求めてる…… ARESの製品でしかモデルアップされてない ずっとAR-15/M4系列ばかりなのが気に食わない。 それにHK416よりG36が好きなんだよ。 確かにギミックのリアリティはGBBRには劣るにしても、UMAREXライセンスAEGとして欲しい人もいる。(もちろん自分含め)
@@thejoyghost17 tbh I'm not 100% sure but I assume both. Also I'll spitball from my little gun knowledge, the biggest thing is supply. With a huge production chain, especially for Germany at the time, I believe this was a lot easier to mass produce. Also injection molding with polymer is easier to design vs aluminum/sheet metal as far as I know i.e cool guns like the mp7, p90, even the usp uses a polymer frame. Same reason Glock uses polymer plus they've been doing it so long logistically doesn't make sense to change over production when you already have a good product.
8:44 daaamn that crisp trigger reset is just 😘, also congrats on being the only airsoft youtuber who practices trigger control so we can actually hear that reset instead of just jerking the bang button like all the others.
vfc going hard on their products, very awesome
I wouldn't recommend janking the stock out of the deflector hold but rather lightly bending it upwards until it clears the hook. Even the real army version had soldiers breaking the deflector out or cracking the body. And unlike the army you will not get a free replacement body after some muddy physical exercises.
If there's a full length version then y'all can take my money
I whould like to have a fullsize G36 GBB like my service rifle back in the days . That whould be awesome
Loving the intros lately lol
Show us internals ? Full auto grouping ? I know you need to sell these, and I will buy this V2 ( or is V3 already ? ), even though I have V1 version of this G36, but I would love to know what were actually improved from the previous version as well.
Is the spring upgradable?
Still waiting for VFC to release their PPK/S 😭 any news on it?
i cant find mags for it anywhere. can someone tell me where to find them?
Were u using a 12 green gas or a 14 green gas?
are the locking lugs on the mags still flimsy? broke most of mine on my 6 mags in a matter of weeks without rough handling. i had the first run of the vfc g36 gbb (non c). maybe the material is better now?
I was just looking at the g36c competition not sure what difference is but I'm guessing the gear box is decent in these
probably because it's not an AEG
Can Tracer unit supressors fit on here?
Yep, it has standard 14mm ccw threading under the flashhider
I'm not a VFC GBBR fan because they are always out of stock. It's cool that they make so many models but if they made more than 7 of each gun it would be better.
Except for the HK416 A5, that seems to be available everywhere. I wonder why.
Question - does anyone know why the real gun has 4 holes in the stock but only 3 pins? Whats the extra hole used for?
rear pin, 2 mag well, 1 handguard ?
The fourth hole has no use. The machine that drills the holes always drills two holes at the same time and therefore there are four holes because the manufacturing process cannot do otherwise.
@@maximilian2680 Thanks for the reply, but arnt the stocks on the real gun injection molded? Maybe there was going to be a 4th pin, but HK already made the molds.
How does this rifle compare with the WE G39?
i need to know this so bad lol
@@ReloadsBladesAndBBsfrom handling this compared to my we tech gbbr, it will be alot nicer
How do I get one?
Unfortunately the first batch were pre-ordered and all taken.
More to come later. www.redwolfairsoft.com/umarex-g36c-airsoft-gbbr-new-version-0-1-2-f-by-vfc.html
@@redwolfairsoft do you have the gas mags in stock for it?
Are there any railed hand guards compatible with this rifle?
there's vfc ras rail or ares ras rail but don't know about ares model will gonna also be compatible with vfc g36
@@sgt3726 got a link? Any pointers?
The gun is milspec as well. ares will not fit. But soon there will be IDZ handguards with hkeys holes and ris (airsoft) you can put rail on the standard handguard as well
You can mount rails straight onto the handguard
is this better than the we g36c?
Yes, proper steel internals. And JSUT generally much better build quality. Better gas efficiency aswell
The G36's regardless of brand and AEG/GBBR scream's rental even though that's a nice gun.
I want one
preferably with integrated optic. Sorry bank account.
@@gregorhi2 The gun itself can be had for about 200.
I'm translating from Japanese to English with Google Translate.
VFC/UMAREX is equipped with a G36 series MOSFET and is looking for an AEG that can also do a 2-point burst......
It's only modeled up with ARES products.
I don't like the AR-15/M4 series all the time.
And I like G36 more than HK416.
Certainly, even if the reality of the gimmick is inferior to GBBR, some people want it to be UMAREX license AEG.
( Of course, including myself)
VFC/UMAREXにはG36シリーズのMOSFET搭載、2点バースト射撃もできるAEGを求めてる……
ARESの製品でしかモデルアップされてない
ずっとAR-15/M4系列ばかりなのが気に食わない。
それにHK416よりG36が好きなんだよ。
確かにギミックのリアリティはGBBRには劣るにしても、UMAREXライセンスAEGとして欲しい人もいる。(もちろん自分含め)
yes, i would actually prefer an AEG version G36c too.
@@lifeofslade Cute.
Oh shit... It's VFC
I Hope it will got Improved big time
Why polymer though
Cuz the real thing is polymer as well, there's no such thing as a metal G36
Like the real one, the g36 is near full polymer.
Lighter and stronger than a good amount of metals for a cheaper price just like the real version.
@@BrockTheTrainer was that why or to cut costs on production
@@thejoyghost17 tbh I'm not 100% sure but I assume both. Also I'll spitball from my little gun knowledge, the biggest thing is supply. With a huge production chain, especially for Germany at the time, I believe this was a lot easier to mass produce. Also injection molding with polymer is easier to design vs aluminum/sheet metal as far as I know i.e cool guns like the mp7, p90, even the usp uses a polymer frame. Same reason Glock uses polymer plus they've been doing it so long logistically doesn't make sense to change over production when you already have a good product.
I wish they weren't limited
I’m not liking it cus the likes are perfect
666
But the damned charging handle.. the stupid thing keeps breaking
Have you tried installing the real thing?
Army armament made one that's good
No full auto I'm assuming you didn't show it because it doesn't do it very well.
….they literally showed it in the beginning
1:09 full auto......