Thanks This is one of the best tech video explained in layman's term period! I think other YT producers should use this as a guide. Only recommendation would be to include engine sound before and after tappet valve clearance adjustments. Keep up this good work.
In proper manner you have set the tappet clearance, really you have done well. I want to ask to the viewers who dislikes this video ,that can you make and explain well regarding this tappet settings.. how you guys can dislikes this video.. He really done awesome.... perfect setting
Thanks bhai for solving my problem ... I had tapped problem in my pulsar 150 and i was worried about it but after seen your video ... I solved it ... thanks a lot
Bajaj discover 125 disc: Tappet clearance as declared by Bajaj authorised service centre reading are: Inlet valve : 0.03 mm Exist valve : 0.05 mm (exactly)
hello brother, bahot hi acha video banaya apne. Maine recently avenger 220 kharidi hai aur uski 2nd service ho chuki hai, aur 1200 kms hui hai. Muze bike me tik tik ke sath sath ek certain RPM (low) pe chalata Hoon to gadi jerk deti hai aur pick up chodti pakadti hai, jaise bichme power loss ho Raha ho ( sath hi engine me se Kuch ajeeb avaj aa Rahi hai zatke ki). aur forcefully RPM badhane se gadi bahot vibrate ho Rahi hai. Kya problem ho sakti hai
Very good bro.....my pulsar 180 cc did not start up and also low battery...... connection wire is working....20 times i kicked it but no start....i'll try myself to start it
My makes noise all the time , no misfire , no pickup problem, bike is smooth, good milage, it starts in First self in cold also ,no starting problem, but too much tappet noise tak tak tak tak , i am frightened that my perfect tuning will get disturbed if i open my engine, can you give any suggestions , please reply
Hello bhai.. very nice video.. Mera pulsar 150 gaadi ki bore change karvaya tha bajaj service Center mai.. par Mujhe nai lag rha ki gaadi tikh hua hai.. full vibration.. and achanak gaadi bandh ho jati.. Service Center wale botha hai ki gaadi mai kuch problem hi nai hai.. plz Mujhe help karo
Hai Avijit How are you? I have a Avenger Street 220 (2015 model). Can you tell me the exact Tappet Clearance of my bike both inlet & outlet valve ? Where can I get it's feeler gauge and valve screw holder? Plz suggest me.
bhai tappet adjustment shi nhi hone se yaa jyada tight hone se engine heating issue ho skta h ya kisi or wajah se h...plz reply ...mere paas pulsar 180 h
I have Rev-Hang problem in pulsar 180.speed jyada karne par agar ek dam slow karo to dheere dheere kam hoti hai...I had checked intake manifold and carburetor boots,both are ok...I am not sure about intake valve? Fuel screw is also full tight aur agar main thoda sa bhi open karta hu to rev bahut jayada ho jate hai so carburetor tunning is useless concern.What do you recommend??
Bhai mere pas Bajaj discover 100cc hai(2010 model) , 50,000 kms par Engine repair karwaya tha, ab 60,000kms chal chuki hai, engine se tik tik sound aata hai, mechanic bola rocker weak hai......agar isko thik karwaye to kitna kharch aana chahiye aur agar isko thik kiye bina chalate rahe to kya problem aa sakti hai aage engine me?Please give your valuable feedback.....
Hi abhijeet.. After taped clearance sound goes... But stll bike not reach above 55km/hr ...service center told clutch plate need replacing ...please tell me what i do.
Hi abhijeet mera avemger 220 hai abhi clutch plate change karaya hai lekin meri bike me bahot jhanjhanahat hoti hai or awaz jyada hota hai strt hone k baad
Nice video,,,very useful,,,,, Mera pular 150 As bike hain,, Usme display time set karne k bad b o piche pad jata haine,,, Bahot baar set Kiya fhir b o kuch der Tak sahi rehata hain,,bike of karne bad o piche rehata hain time,,, Reason kya hai bro?
MasterMind Tech bhai meri pulsar 220f hai, after first service done, meri bike heat hone pe jhanjhanahat badh jati hai, avi 1600 kms chali hai bike mai rozz ye problem face kr rha hu, ek mechanic ko dikhaya to bola tappet milana pdega, mai kya kru bolo aap, koi dikkat to ni hogi n engine pe ? 2nd service me ye problem fix ho jayegi kya, service center ka mechanic log kr to dega n ye
Sir, meri bike pulsar 150 ug4 kal kal service karwaya tha, 56500 km. service ke time par mein available nhi tha, service center wale bol rhe hai aapki bike se 400 ml mobil oil hi nikla hai, aapko bike engine ka kam karwana padega. 5000 ke aaa pass bill banega. Par meri bike mein koi smoke, avarage issue, pick up, oil leakage issue nhi hai. Sab kuch sahi hai. Please advise
Abhijeet ji bajaj company apne wngine oil ko 10000 pr drain aur 5000 pr top up krne ko kehti hai aisa hi user manual main likha hai to kya 10000 km tk oil safe rahega....
hey abhijit ...my bike loose power when it becomes heat after 30 km.....i have change my cylinder piston kit...valve..timing chain ...clutch assembly....engine loose power after running 20 to 30 km......but initially it seems better when i start ridding....what should i hav to do
bhai tappet gap adjust na karne se tik tik noise k elaba aur kya kya dikkat aah sakta hai bike mai ? mera 150 4000km hi chala hai..thoda tik tik noise aah raha hai idling mai..aur thodi chalane pe hi engine bohot jyada heat ho raha hai aur engine oil v thoda kam ho gaya hai..power v kam mil raha hai bike se..
bhai maine pulsar 200ns me carbueratot jet kit change kia hai aur tappet adjustment bi Kia hai 0.05 and exhaust 0.08 abhi adjustment karne ke baadh kafi smoke aaraha hai kya koi problem hoga pls reply
Hi Abhijeet Mere pas pulsar 150 he aur bike running me hoti h aur clutch dabate h to thodi der bad automatically bike bandh ho jati h aur bike ke niche ki side se avaj aati h kat kat kat jaise chain chakkar me aati h. So kya reason ho sakta h iska?
sir mere pass discovere 135 model 2009 ke bike h.. eshmay digtal speed metter hai. wo din may kabhi chalta hai kabhi nai. or night may head light on karne k bad houran ke battan push karne may speed metter start ho jata hai. pl asha kyu hota hai bataye
hlo sr mere bike ka engine oil khtm ho gya tha ol engine dry ho gya tha us tim ke baad mera bike tik tik ki aavaj kr ra h bhutt jyada jv m accelator de ra hu apni bike m ye video kaam krega ......jo apne bnaya h
sir i am using ignitor its getting some noise from head then mechanic adjusted rocker from then bike is not withstanding the beating..how to resolve rocker issue.. thank u
Bhai mere bike pulsar 220 me half engine work ki but vibration bohot hai to nuksan to nahi hoga na🙄 our tappit dille rakhe he to koi nuksan to nahi hoga
Bhai meri vi madat kardo .mera 220f pulasr hai .2017 ka new bike hai jisme niche se 1,2 gear ma tak tak aawaj aa raha k ...kya isko engine kholda padega ya nahi ..
watch other videos - goo.gl/kudjFQ
best automotive product - amzn.to/2PSvUBe
Twitter: twitter.com/Abhijitmohire89
Facebook: facebook.com/mastermindtechnology
Instagram : instagram.com/abhijitmohire
Bike start krke to btaya hi nai
Honda shine ka bhi Tapped setting karna Bata do bhai
Bro.. My 220f bs3 is giving 25 mileage what to do
very nice....
sab mistri log andaZe se hi set krte hn hamesha.
first time dekha kisi ko perfect methods use krte hue.
good job!
.
Thanks
This is one of the best tech video explained in layman's term period! I think other YT producers should use this as a guide. Only recommendation would be to include engine sound before and after tappet valve clearance adjustments.
Keep up this good work.
In proper manner you have set the tappet clearance, really you have done well.
I want to ask to the viewers who dislikes this video ,that can you make and explain well regarding this tappet settings.. how you guys can dislikes this video..
He really done awesome.... perfect setting
Nice... मस्त video भावा... एक नंबर!
खूप चांगली माहिती दिली. खूप खूप धन्यवाद...
Thanks bhai for solving my problem ... I had tapped problem in my pulsar 150 and i was worried about it but after seen your video ... I solved it ... thanks a lot
+Raj Thakor welcome bro..
You did it yourself? Cool!
Raj Thakor Bhai tappet ka noise kaise atha he and apko kaise patha chala vo tappet ka noise he ya timing chain ka
The birds are singing for your presentation ❤️keep going
Full details ke sath dali sir video thank to explain 🤝👍🙏
Bajaj discover 125 disc:
Tappet clearance as declared by Bajaj authorised service centre reading are:
Inlet valve : 0.03 mm
Exist valve : 0.05 mm (exactly)
Bahut acha tha aapka video
meri bhi bike me yahi problem hai pulser 150 me
hello brother, bahot hi acha video banaya apne. Maine recently avenger 220 kharidi hai aur uski 2nd service ho chuki hai, aur 1200 kms hui hai. Muze bike me tik tik ke sath sath ek certain RPM (low) pe chalata Hoon to gadi jerk deti hai aur pick up chodti pakadti hai, jaise bichme power loss ho Raha ho ( sath hi engine me se Kuch ajeeb avaj aa Rahi hai zatke ki). aur forcefully RPM badhane se gadi bahot vibrate ho Rahi hai. Kya problem ho sakti hai
भाई बहुत अच्छा लगा आपकी वीडियो देखकर एक गुजारिश है आपसे बजाज वी15 के ऊपर एक वीडियो बनाओ उसकी टैब किस तरह से करते हैं मेरे Bajaj v 15 में आवाज आ रही है
Very good bro.....my pulsar 180 cc did not start up and also low battery...... connection wire is working....20 times i kicked it but no start....i'll try myself to start it
Piston ko top pe lane ke liye bike ko gear main rakhna hai ya nutol main rakhna hai bhai
Bro... Maine tappet setting kar k... Jab mai 50 speed k saath chalta hon... Speed kam kar k gear waps la k bike band hoti hai...kya reason hai?
Bhai bhut mehnat ki hogi video banane me, good video
Nice brother aap bahot hi accha samkate he
bhai bahut badhya vedio banaya bhai thanks
Very helpfull and also please explain why inlet 0.051 and exhaust 0.102mm.
Because the exhaust valve become more heat so expansion is more. Thats why the exhaust valve tappet clearance high
Discover 150f 4 valve ke liye
Same clearance rakhna chahiye kya
Ya fir inlet 0.005 aur exhaust 0.008
Vai apka videos bohat hi accha hain..agar ho sake to self start ka problem ka video banhaiye to bohat..achha hoga
Thank-you so much for informative video..👍👍👌 subscribed
+Rajinder Singh Welcome Bro
My makes noise all the time , no misfire , no pickup problem, bike is smooth, good milage, it starts in First self in cold also ,no starting problem, but too much tappet noise tak tak tak tak , i am frightened that my perfect tuning will get disturbed if i open my engine, can you give any suggestions , please reply
Hello bhai.. very nice video.. Mera pulsar 150 gaadi ki bore change karvaya tha bajaj service Center mai.. par Mujhe nai lag rha ki gaadi tikh hua hai.. full vibration.. and achanak gaadi bandh ho jati.. Service Center wale botha hai ki gaadi mai kuch problem hi nai hai.. plz Mujhe help karo
Very nice video it was very helpful plz make more n more videos..
Sir bajaj discover 135 mein ye tarika use kar sakte hai kya aur gage aur Jo aap ne use kiya wo pana kahan milega please reply zaroor karna
Hai Avijit How are you? I have a Avenger Street 220 (2015 model). Can you tell me the exact Tappet Clearance of my bike both inlet & outlet valve ? Where can I get it's feeler gauge and valve screw holder? Plz suggest me.
Bahut accha bro God bless you😇
Sir new pulsar k engine pr oil ki bhot mamooli si layer hai........kya ye koi dikkat ki bat hai??.......oil tapak nhi rha hai.........plzz suggest!
Platina comfertac 100cc bike m kya setting size hoga valaves ka
is that pulsar 180? what was the valve clearance youve been use? what tappet clearance in feeler gauge?
bhai tappet adjustment shi nhi hone se yaa jyada tight hone se engine heating issue ho skta h ya kisi or wajah se h...plz reply ...mere paas pulsar 180 h
Mera gari idle nahi hota hai. Tappet ke liye ho sakta hai kya? Carb cleaning karwaye hain aur mileage sahi deta hai. Tappet adjust karna padega kya?
Thankyou so much aap se sikne apna bike bana ta hoo
I have Rev-Hang problem in pulsar 180.speed jyada karne par agar ek dam slow karo to dheere dheere kam hoti hai...I had checked intake manifold and carburetor boots,both are ok...I am not sure about intake valve?
Fuel screw is also full tight aur agar main thoda sa bhi open karta hu to rev bahut jayada ho jate hai so carburetor tunning is useless concern.What do you recommend??
Very useful video, thank you.
can we reduce smoke by adjusting tappets?
Bhai mere pas Bajaj discover 100cc hai(2010 model) , 50,000 kms par Engine repair karwaya tha, ab 60,000kms chal chuki hai, engine se tik tik sound aata hai, mechanic bola rocker weak hai......agar isko thik karwaye to kitna kharch aana chahiye aur agar isko thik kiye bina chalate rahe to kya problem aa sakti hai aage engine me?Please give your valuable feedback.....
Hi abhijeet..
After taped clearance sound goes... But stll bike not reach above 55km/hr ...service center told clutch plate need replacing ...please tell me what i do.
+Satpal Lamba bro tapped over tiggtet, please do tapped setting again
Hi abhijeet mera avemger 220 hai abhi clutch plate change karaya hai lekin meri bike me bahot jhanjhanahat hoti hai or awaz jyada hota hai strt hone k baad
Nice video,,,very useful,,,,,
Mera pular 150 As bike hain,,
Usme display time set karne k bad b o piche pad jata haine,,,
Bahot baar set Kiya fhir b o kuch der Tak sahi rehata hain,,bike of karne bad o piche rehata hain time,,,
Reason kya hai bro?
MasterMind Tech bhai meri pulsar 220f hai, after first service done, meri bike heat hone pe jhanjhanahat badh jati hai, avi 1600 kms chali hai bike mai rozz ye problem face kr rha hu, ek mechanic ko dikhaya to bola tappet milana pdega, mai kya kru bolo aap, koi dikkat to ni hogi n engine pe ? 2nd service me ye problem fix ho jayegi kya, service center ka mechanic log kr to dega n ye
Nice sollution bhai👍👍👍 i have same problem ,but now it solve..
I want help , my pulsar 150 front disc brack jaam problem, how to solve it ??
Break Oli check
bhai ye gauge or tappet adjudstment tool konsi site p milenge...or market se le to kya price hoga...plz tell
Sir kya tefit ka oil cap alg se mil jata hai
great explanation bro thank you sooooo much 😊
Chaithanya Damerla welcome bro..
bro can you show us how to clean oil filter in 150...I've been searching for that from a long time.
Chaithanya Damerla sure bro just wait 2-3 days..
Very good brother 👍
Sir, meri bike pulsar 150 ug4 kal kal service karwaya tha, 56500 km. service ke time par mein available nhi tha, service center wale bol rhe hai aapki bike se 400 ml mobil oil hi nikla hai, aapko bike engine ka kam karwana padega. 5000 ke aaa pass bill banega.
Par meri bike mein koi smoke, avarage issue, pick up, oil leakage issue nhi hai. Sab kuch sahi hai.
Please advise
nice work brother keep it up and how to change cam shaft on pulsar pls do this...
Just put a piece of shaving blade then tight n lock it...the best way to adjust n im doing it since the era of cd 100
Abhijeet ji bajaj company apne wngine oil ko 10000 pr drain aur 5000 pr top up krne ko kehti hai aisa hi user manual main likha hai to kya 10000 km tk oil safe rahega....
Bhava pulsar 180 2010 model handel assembly badalun old handle assembly basavata yete ky
Super explanation👍👍
Abhijeet,
Kya hum magnet cover ko khol k Flywheel ghuma kr bhi piston top pr adjust kr sakte hai??
Gear me kick maar k "T" pr set nhi ho parha hai....
Hmm bilkul
Namskar bhau
Head ch kam kelyaavarti tapet clearance kami mhanje nakki kiti thevava ka fakt fiting karun thevava
Meri bike me out let cap me se bohot oil leak ho raha hai kya karu sir
Thanks MASTERMIND TECH......
+iqbal hossain Welcome Bro
hey abhijit ...my bike loose power when it becomes heat after 30 km.....i have change my cylinder piston kit...valve..timing chain ...clutch assembly....engine loose power after running 20 to 30 km......but initially it seems better when i start ridding....what should i hav to do
+Kaushlesh Dwivedi bro tapped setting krvalo ho jayega
nic video bro and explained very well thank u so much
raj nair Welcome Bro..
Bhaiya bajaj vikrant 150cc ka kya tappet gauge hai? Manual dekhi, poora google dekha kahi nahi mila bhai pata ho to bata dena bhai ji...
mailaze
main me jyda petrol pita hai ke recive me jankari lena chata hun ?
Should i take pulsar 150 classic or Honda unicorn 150
Bhai....Isee average me bhi fark phdta he kya
ceramic coating fade hui ya vaise hi hai... do reply???
thanks very much my vehicles are same problem so i get a solution
Vishwanath K Welcome bro..
0.10 mm mee exhaust tappet loose tha to maine 0.08 me adjust kia..kya yeh setting chal sakta hai yaa 0.1 hii karna hoga
bhai tappet gap adjust na karne se tik tik noise k elaba aur kya kya dikkat aah sakta hai bike mai ? mera 150 4000km hi chala hai..thoda tik tik noise aah raha hai idling mai..aur thodi chalane pe hi engine bohot jyada heat ho raha hai aur engine oil v thoda kam ho gaya hai..power v kam mil raha hai bike se..
अच्छे सब्जेक्ट पे व्हिडीयो है । लेकीन आपने अँडजस्ट करने के पहले साऊड कैसा था वो नहीं दिखाया ।
Sir Meri bike m suru se dikkt hi jab new purchase ki thi tapped ki lag rhi hi muje lakin AP btao uski race apne 15 20 din bad Kam ho jati hi
bhai maine pulsar 200ns me carbueratot jet kit change kia hai aur tappet adjustment bi Kia hai 0.05 and exhaust 0.08 abhi adjustment karne ke baadh kafi smoke aaraha hai kya koi problem hoga pls reply
Bro bjaj ct 100 2006 model ka intak aur exust ka gap kitna hona chaiye plz bataiye!
Hi Abhijeet
Mere pas pulsar 150 he aur bike running me hoti h aur clutch dabate h to thodi der bad automatically bike bandh ho jati h aur bike ke niche ki side se avaj aati h kat kat kat jaise chain chakkar me aati h. So kya reason ho sakta h iska?
Sir namaskar hero honda old glamour aur bajaj platina ka inlet outlet clearance bhi batae
sir mere pass discovere 135 model 2009 ke bike h.. eshmay digtal speed metter hai. wo din may kabhi chalta hai kabhi nai.
or night may head light on karne k bad houran ke battan push karne may speed metter start ho jata hai.
pl asha kyu hota hai bataye
hlo sr mere bike ka engine oil khtm ho gya tha ol engine dry ho gya tha us tim ke baad mera bike tik tik ki aavaj kr ra h bhutt jyada jv m accelator de ra hu apni bike m ye video kaam krega ......jo apne bnaya h
Bhai pulser engine roker kaise replace Kare,ek video banao
Hello bro seplnodor plus me ise kse adjust kre
Taping net ka gap kintna ho na chahiye
can you show video on avenger 220 tappet and how to remove valve door?
gud day sir,what is the exact valve clearance inlet valve and exist valve for rouser 220.from philippines, thank you sir.
Mujhe ek bat batao ke pulsar new 150 dts i me gear shifting ka noise bahot zada hai ye qq itna zada hai or isko tik kese kare
Does inlet-0.05mm and out-0.1mm valve clearance applicable for all dtsi engines like 150, 180, 220?
Yes
Engine oil change korna joruri he kia ea korne ke lia
Can I do adjustment with blade?
sir i am using ignitor its getting some noise from head then mechanic adjusted rocker from then bike is not withstanding the beating..how to resolve rocker issue.. thank u
Bs6 e 20 model pulsar 125 tappet setting pe ek video banaiye pls
Hello boss Wo round shape ka jo tappet adjuster tool hai wo kahan milega
Hello bro pulsar 180 me tappet clearance value kitna rakhna hai front or back me
Hlo sar tepid set kar liya timing chain cheng kia oil bhi change Kiya to bhi awaj aa raha hai kuch batyen sar paresan ho gaya hun
bhae engine ke right side me ek pipe uper ki tarf ko jata he vo kis kam aata he(14.08 horn ke piche ,cable k uper)?
Pulsur 150 me oil konsa daale please..batao
Sir meri pulsar 150
15500 chl chuki kya muje tappet settings krwani chahiye pls btaye
Bhai mere bike pulsar 220 me half engine work ki but vibration bohot hai to nuksan to nahi hoga na🙄 our tappit dille rakhe he to koi nuksan to nahi hoga
After half engine and clutch plate work we need to do this ?
क्या tappet tool splendor wala fit hoga
इगजोसट वाला ज्यादा और फ्यूल वाला कम टाइट करना है ना?
Tapped adjustment ka gitna chaya hai??
sir pulsar 220 me same blete yoga ya dusara
Dear mastermind kindly make video on honda city car engine air blow from oil inlet and reasons and solution
Thanks from my heart ♥ bro
Bhai meri vi madat kardo .mera 220f pulasr hai .2017 ka new bike hai jisme niche se 1,2 gear ma tak tak aawaj aa raha k ...kya isko engine kholda padega ya nahi ..