You don't need that rig to activate, I mean I activate main without taking off the joycon. I just insert the rcm loader and is starting.I don't understand why you need to take off one of the joycon.
I imagine the use for this is being able to get to the boot menu/hikate without having to use your computer. Correct. So you would be able to inject the payload anywhere in the world as long as the rcm loader is charged. And play modded switch.
You don’t need to update, but it is safe to. Whatever you’re on when you create your emummc is where it’ll stay unless you update later down the road. Which is possible, at any time. Just make sure you start with the latest HATS pack!
As long as you don’t touch the sysMMC (original device storage) you can go back and forth at will and play online. Just make sure to follow the guides and setup the proper exosphere and dns blocking services first to avoid a ban!
I received my rcm loader yesterday. I'm booting into hekate with no problem but when i click on launch or more configs i just have an error message saying "no main boot entries found"
Im looking to mod my switch as i have a v1 that dont get that much use but perhaps modding will give me more use out of it. Its a jungle to go throu but this product seems to do something i woundered about. If i softmod my switch and it runs out of battery i need to use the computer to be able to bot it up in custom settings, but this device will let me do it aswell without the need for the computer so on a long holliday where i run out of battery i wont have to wait untill i get home to bot it up again right?
@ just be aware that when replacing the sd card there are steps you need to follow! I have another video on hekate install if you haven’t seen that yet.
@@Randyisanerd been watching tons on videos the last week since deciding to mod the consol(: I will look through all videos again before i actually does anything, hopefully i will get the new memorycard this week. As of right now everything is stock and i dont really think there is anything on the the current catd that i need to save.
@@kgp4death this device alone will not mod your switch. This device is more for convenience after you already have the mods installed. If you don’t have a modded switch already then you need to go through the process of doing that first. Depending on your switch that could be relatively easy because it unpatched or very hard because you’re trying to install a mod chip. Google is my switch patched, and go down the rabbit hole from there.
You need to have a prepped SD card with the appropriate files on it to boot into hekate. It if your V1 switch is unpatched, you don’t need a mod chip (but you can put one in if you want to make reboots easier)
Once the RCM Loader is loaded, yes thats one of the features, you can even install custom firmware so that you can load pirated games at system startup among other things.
@@CM-1723 RCM loader is technically easier the most of the stuff you need is already. But its technically incomplete and outdated. But you can easily bridge from there to get the best CFW and stuff.
@@StriderVM when you say Bridge do you mean like the clip jumper thing that you slide on the right side ? So do you need one of them wether you use the rcm loader or use a USB wire connected to the pc ? Are switch game roms available ?. Do you have a option to boot into CFW and the original for use online
@@CM-1723 I am assuming you are a newbie since you have so many questions. You're just gonna get confused. NH Switch Guide is a website that can help with the whole thing. But technically yes, you can get both CFW and then official for online, but it's very complicated to do.
I'm lookin' into getting an unpatched switch! Though, when you mean by "let the battery die" does that mean the switch reverts the mod if the battery run out of juice?
Exactly! If you let the battery die, or do a full power off shut down (as opposed to normal sleep power off), you’ll need to do these steps again. Easy, but can be mildly inconvenient.
Hard to troubleshoot without more details. Was the rcm loader working before your updates? You sure you’re on a v1 switch? Have you loaded the file onto the rcm as shown in my rcm firmware update video?
@ Yes, RCM loader was working before and yes on V1 Switch. I installed the latest version. I got the RCM Loader working by holding the volume up button and pressing the power button, before I would hold both volume up and power button at the same time and it did not turn on. Thanks for replying
Finally a tutorial where someone actually speaks lmao I saw 3 where no one was explaining
Hahahahahahaha
I live in Brazil, I'm glaad for your help. Thank you so much
With this method do we still need to format the SD card or do anything to it at all? Or does the loader take all the brain work out of the process.
Still need to do all the same work to the sd card. I have a 5 minute complete walkthrough video on it though! You CAN do it!!!
@@Randyisanerd so it loads the jailbreak on the emuMMC?
You don't need that rig to activate, I mean I activate main without taking off the joycon. I just insert the rcm loader and is starting.I don't understand why you need to take off one of the joycon.
I imagine the use for this is being able to get to the boot menu/hikate without having to use your computer. Correct.
So you would be able to inject the payload anywhere in the world as long as the rcm loader is charged. And play modded switch.
Hello . Thanks for the tutorial. When update later to newer CFW, do i need to update the rcm loader ?
Most likely not. But eventually maybe. I believe the last version I checked as working on the old firmware was 18.0.1
I just bought it and continued to use it. Unsuccessful
Have you updated the firmware on it? I have a different video outlining that process. Pretty straightforward.
@Randyisanerd ...thanks bro. No problem now. All set👍🏻
So if i use this rcm loader, i dont have to install hekate in sd card. Just need to use this every time reboot ?
Hi. I just got my unpatched v1 switch and saw your video. Do I need to update the firmware for my switch before doing this step?
You don’t need to update, but it is safe to. Whatever you’re on when you create your emummc is where it’ll stay unless you update later down the road. Which is possible, at any time. Just make sure you start with the latest HATS pack!
Is it possible to play online with that mod?
As long as you don’t touch the sysMMC (original device storage) you can go back and forth at will and play online. Just make sure to follow the guides and setup the proper exosphere and dns blocking services first to avoid a ban!
I received my rcm loader yesterday. I'm booting into hekate with no problem but when i click on launch or more configs i just have an error message saying "no main boot entries found"
Search sthetix dot info for the most recent HATS package. Drag and drop to your SD card and you’ll be golden.
Im looking to mod my switch as i have a v1 that dont get that much use but perhaps modding will give me more use out of it.
Its a jungle to go throu but this product seems to do something i woundered about.
If i softmod my switch and it runs out of battery i need to use the computer to be able to bot it up in custom settings, but this device will let me do it aswell without the need for the computer so on a long holliday where i run out of battery i wont have to wait untill i get home to bot it up again right?
That’s correct. This can inject the payload to get it to boot to your CFW while not around a PC.
@@Randyisanerd ordered one the other day along with a new larger SD card aswell so once i get it all in the mail its time for some upgrades.
@ just be aware that when replacing the sd card there are steps you need to follow! I have another video on hekate install if you haven’t seen that yet.
@@Randyisanerd been watching tons on videos the last week since deciding to mod the consol(:
I will look through all videos again before i actually does anything, hopefully i will get the new memorycard this week.
As of right now everything is stock and i dont really think there is anything on the the current catd that i need to save.
What can you do with it?
It lets you get into hekate without a pc
@melbatoast1985 so homebrew and emulators right what about backups?
@@kgp4death this device alone will not mod your switch. This device is more for convenience after you already have the mods installed. If you don’t have a modded switch already then you need to go through the process of doing that first. Depending on your switch that could be relatively easy because it unpatched or very hard because you’re trying to install a mod chip. Google is my switch patched, and go down the rabbit hole from there.
Does it work on a V2? And if so do you still need to connect it to your pc to load in the atmosphere mod?
RCM only for v1. A chip is better in just about every way anyway.
Hey i have a question: Can i boot in with the rcm Loader only to run the MigDumpTool without completly Jailbraking my Switch V1?
With an unpatched v1 you can get in and do any home brew you want!
Is this up to date now? Or outdated? It only works on original unpatched switch?
As long as you’ve got the latest HATS pack on an sd card it still works on early, unpatched devices.
Anyone know a legit place to buy one of these, or tutorial to DIY one? Not seeing them on Amazon currently.
Aliexpress. eBay gets lots of cease and desist orders…ask me how I know 😂
@Randyisanerd You an eBay seller or something?
Where can I buy the loader?
Ali express
Do you need to mod your switch before using the rcm loader?
You need to have a prepped SD card with the appropriate files on it to boot into hekate. It if your V1 switch is unpatched, you don’t need a mod chip (but you can put one in if you want to make reboots easier)
What does the rcm loader actually do ? After just plugging this in like shown are you able to play roms from a sdcard ?
Once the RCM Loader is loaded, yes thats one of the features, you can even install custom firmware so that you can load pirated games at system startup among other things.
@@StriderVM so I thr rcm loader the easiest way to do it or can you just do it straight from pc just as easy ? Can you install switch games for free ?
@@CM-1723 RCM loader is technically easier the most of the stuff you need is already. But its technically incomplete and outdated. But you can easily bridge from there to get the best CFW and stuff.
@@StriderVM when you say Bridge do you mean like the clip jumper thing that you slide on the right side ?
So do you need one of them wether you use the rcm loader or use a USB wire connected to the pc ?
Are switch game roms available ?.
Do you have a option to boot into CFW and the original for use online
@@CM-1723 I am assuming you are a newbie since you have so many questions. You're just gonna get confused. NH Switch Guide is a website that can help with the whole thing. But technically yes, you can get both CFW and then official for online, but it's very complicated to do.
I'm lookin' into getting an unpatched switch! Though, when you mean by "let the battery die" does that mean the switch reverts the mod if the battery run out of juice?
Exactly! If you let the battery die, or do a full power off shut down (as opposed to normal sleep power off), you’ll need to do these steps again. Easy, but can be mildly inconvenient.
@@Randyisanerd ouhhhh! I see. Does this work on current version unpatched switches or does it have to be an old firmware?
17.0.1 here and working fine.
@@Randyisanerd Noted. Thank you!
IT SAYS RED HOW DO I FIX
Uhhhh…what?
@@Randyisanerd like it shows red when I try it on the switch when starting the jig
@@Randyisanerd how will I know if it is unpatched
Ahhh you’re using an RCM loader. Did you check your serial number on the amipatched website?
I updated Hekate to the latest update and downgraded to version 5.9.0. Both versions not working on the RCM Loader. How to fix my RCM loader?
Hard to troubleshoot without more details. Was the rcm loader working before your updates? You sure you’re on a v1 switch? Have you loaded the file onto the rcm as shown in my rcm firmware update video?
@ Yes, RCM loader was working before and yes on V1 Switch. I installed the latest version. I got the RCM Loader working by holding the volume up button and pressing the power button, before I would hold both volume up and power button at the same time and it did not turn on. Thanks for replying
Where can I buy this rcm loader?
Aliexpress