Yeah, R24 hits differently! But, yeah CPU's are getting fast enough that R23 is getting to the point where it's not putting enough of a demand on the CPU over R24.
Not overkill at all I would full utilize it for Cinema4D/Redshift and Houdini (as much RAM and as many CPU cores as possible for sims!) There literally IS no overkill.
@@rylee1395 I think it’s because in 2021 gpus were extremely expensive, because of crypto. For example a 3070 costed $1,600 in my country, now it’s $500 lol
sadly itll be worthless by then, just as how 10 year old workstation builds are worthless now... they're used for professional work, and professional work can not afford to be done at a snail's pace.
This is one amazing build. I would not have use for it, but for those who do, in fields like research models, it is incredible! I also love that your assistant was present! :)
I just love how you try to get the maximum performance out by using minimal components -- that is not using fancy case or RGB lighting. I know a lot of pc builders who would undoubtedly put more bucks on these least important things. A huge shout-out for you
I am always amazed on all the high quality profesional content you create for all of us. I used one of your videos to make my new pc replacing my old i7 first gen build from 2010! Thank you for all your creativity at all levels!
I like the idea of the power draw- but people can’t really quantify that unless they buy pcs and test them like you, so it would be better to do a render test like the blender classroom and see how long it takes
@Muskeln-kaufende Imagine conflating a scientist with the actions of a Government. Or better yet, blame the Emperor for attacking Pearl Harbor. Those citizens died because the Japanese Empire couldn't keep their dick in their pants.
ah yes of course, how can we forget to celebrate the one and only brother amongst us that developed the weapon that can destroy all life on earth. Such a memorable, honorable gentleman.
exactly. if he built a custom loop, the gpus would just sit in the pcie slots. ive built 7gpu workstations with ekwb blocks and it looks slick. not like this abomination.
the reason for the cpu not being so hot with cinebench, is because it uses all the cores they stay at base clock ~2.8ghz, but with the 32 core bench they boost up to 4Ghz. that's where you can tell if the cooler is enough or not, because is very hard to remove all that focused heat from the die's specific areas. it seems to be ok.
Yea but it that because of throttling in the first place… 32 cores won’t get as hot as 128… a system that nerfs itself is counter productive. Why pay for half of the performance promised?
@@max.racing Depends what software you use. For example, in some that support remote render farms, typically you can also treat your own pc as a render farm and utilize all registered GPUs. But u gotta check with the software in question, results may vary.
@@max.racing afaik the consumer nvidia cards do not pool vram with most render engines, i heard nvlink does work with pooling on consumer cards if you force it but nvidia gimped it and might continue to do so. workstation cards are better for these type of things since they're supported. rip heavy scenes if they exceed 24gb vram.
The little fella is the double of his dad. Top end pc and an amazing well put together vid. And im sure the little guy will be following in his old mans footsteps 1 day.
LOL, great intro! You post such good content about 'STRONG' computers, you are among the first I go to when it comes to hardware that can really blast! For my artwork I need super good processing (3D) and also GPU power. So I really appreciate the info you give out!
Water cooling the GPU could have saved some space. Wondering what AMD Bergamo chip build would be like as it's more into high-end server / workstation chip
I like the video and intro, but at this price point would make more sense to run a custom loop for a cleanliness and better airflow within the case. While the rig is undoubtedly high end, it kinda looks like a hot mess.
11:00 - You can but no in RAID mode. AMD PCIe RAID will NOT allow you to boot with 13x SSD's connected - I tested it on the same motherboard 🙂 50:50 - No you won't because you forget about the efficiency of the power supply. It is 94.29% @ 1600W, so you can take up to 1697W from the wall. BTW, I'm using the same motherboard with 3995x and 256GB of consumer DDR4-3200 CL10 (because I can).
Love your channel ! You're the only one I know of showcasing true Workstation builds. I'm so tired of watching gaming PC builds. I'm old and retired but I built an almost identical Workstation for my CG hobby. However, I do run CPU & GPU's on a simple soft tube custom loop, it really cleans things up. ( Think Un-Janky ) My main tools are Solidworks, C4D & Redshift. I was pulling 1,780 Watts from the wall for my one hour stress test / burn-in using AIDA64. No issues popped up.
Dude, if you spend 50k to have this, (and play 8k/120fps lol) I'm sure you can squeeze another 2k at most and make the system an entire hard tubing water-cooled system, and include the GPUs in it with replacing all the GPU radiators with water-block and active backplates. This way you will have more than enough space to arrange them looking beautifully, and keeping them much cooler at the same time. because let's admit it, no matter how many fans you stuff in that case, 3x4090 and everything else in there will make that case warm up like a fireplace.
Surprised there’s not a full loop for this level of PC. Seems like it would be a way to avoid some of the mess with the side of the cards 😂. Insane build tho!
I had a similar build during the pandemic. Work allowed me to build a workstation based on a Tr 3995x, 256Gb, designare board, 10tbx8 raid array + 2x8tb ssd and two office-suppied A5000.
Very good explanation for TR workstation build~! I enjoyed it. The latest BIOS version is 1201, from which you can control fan speed. Of course, that is still possible at IPMI. To see 8 sticks of RAM in monitoring programs, set Server Mgmt menu -> BMC DRAM SMBUS Switch -> BIOS The latest firmware version of BMC is 1.32. I believe that you already chaged the password of the administrator account in IPMI. As you know, the strict secure principle of BMC/IPMI makes several inconveniences 1) RMA not direct AS 2) Can't use sensors to control the workstaion but can read parts of them. In more detail, one prefer to control customly water-cooled system based on temperature of coolant. In air-cooling system, one may control fan speeds & RGB based on temperatures of CPU, VRM, etc. Via IPMI & BIOS/UEFI, we can control system fans. But we can not use T-sensor for controling speed of water pump in other utilities, just read the value of it. And there are other facts that we may happen to see during the build. So, I'd like to recommend any usb herb of PWM & Sensor ports like Quadro or Octo, etc.
Crazy, you just keep pumping out amazing builds loaded with so much detailed info. I will be building a Threadripper Pro system soon, probably of the 7000 series. Great work, best video yet. "1400 watts" Your reaction, priceless.
You may want to look into getting a Superflower 2000W Leadex Platinum PSU. Suplerflower is the manufacturer of the EVGA G2, G3, P2, P3, and T2 lines of PSUs. They are very good power supplies. I would also recommend getting a sheet of Honeywell PTM7950 for the CPU die, instead of paste
In my experience with PC building over the last 24 years, my advice is to never skimp on the power supply. Always buy the best power supply money can buy. Also, I have found through my experience that EVGA makes the best highest bin parts. I have had so many power supplies fail, even my brothers platinum rated 850w Seasonic power supply failed after only a few years of constant use. I built my then top of the line gaming computer in May 2017, and have ran it nonstop with the same EVGA 1000w T2 14+ hours a day.
Love your channel. It's so great to see builds for animation pros and not just gaming. Currently doing research fot my next build for running Unreal Engine and local AI.
Now this is the content I subbed for! lol. Now that I've seen this build, I dream of a rack-style build of similar scale, but with full watercooling on all components both for space management and performance. And a slim rack like that could even hang on a wall as a standalone pc, which is something I intend to build sometime in the future. Great work, and editing is top notch as always.
It's unfortunate that Nvidia got greedy(ier) and no longer offer nvlink like they did on 3090. Would be even beastier to be able to daisy-chain them together with shared memory...
Sli is on the motherboard now… But yes it would be nice to maintain x16 across all slots. Perhaps having that physical pathway could bypass the bottlenecks and software limits. You can even shared resources and gpu inside the network or cloud now or make your own.
People can say whatever they want about how it looks estheticly and all but I am with you brethren, as long as it stays under 70 degrees and stay kool while running heavy load then thats all that matters. Performance over looks. Just keep it like that bro, it may look janky but it doesnt matter because it excels in performance and not looks. Great job on building this monstrous pc😊
Aren't you drawing heat from the top GPU into your CPU? It's cool enough but i'd flip the tower so it draws air from the front of the case and exhausts it out the back.
awesome build!!! WOW! How would this machine do when rendering youtube videos ? I see rendering YT video use all CPU's/threads at almost 100% with a 13900K. The 13900K renders YT videos in 5 minutes or less for an hour+ of 1080p. Could you render a YT video on a machine like this and show how it reacts?
There's such an essay solution to the space issue here. Just watercool the GPUs and make them 2 slot. Easy. Done. I've got a Cooler Master EVO 700,which is an absolutely humongous case, but I needed some separation between a very hot RAID card, 25Gbit SFP28 NIC and the graphics card. The 4090 taking nearly 4 slots was a nightmare, so I had no choice other than to watercool the GPU or the cards would be really close to one another.
I'm late to comment, but something you forgot to mention in the comparison between 4090's and the A6000 Ada is ECC; it's not just the VRAM difference. For many people that's a non-factor, and you're absolutely right on the peformance/price comparison, but there are situations where a professional would require ECC. I don't agree with what I would argue is malicious market segmentation on ECC, whether it be on regular dimms or VRAM, but if someone needs the guarantees provided by ECC, then they have to bite the bullet on that cost.
nice pc build🤩🤩, but i will not say that Nvidia 4090 is better than the Nvidia rtx a 6000 series card because most of them have around 48 of vram compared to the 4090 which only has 24 of vram so having having 2 Nvidia a 6000 card with NV link is more powerful than the three Nvidia 4090 series mainly for 3d work and gaming what your take on that???
Awesome build. I’m curious though, why not build one with two of the 2nd fastest CPUs instead of one of the fastest? Are creator programs just not good utilizing them or are they glitchy?
Multi socket motherboards exist but only for CPUs which support multi CPU operations. Consumer CPUs do not support, AMD Epyc supports 2 CPUs while Intel Xeon up to 8 CPUs per motherboard. CPU must be designed to support multi socket operation.
Its a realy awesome build. I love the phanteks case! have one myself. To be fair though, you could have watercooled the CPU with a custom Loop (AIOs are just shit), overclocked it, and ssqueezed out a bit more juice ;) For absolute overkill, slap a watercooler on the GPU, overclock that and get the utmost out while tempteratures are still lower than aircooled and overclocked.
This is similar to my workstation. I have a 2990 64 core AMD with 256GB RAM and 3x4090 Cards. I do think I will move over to using only 2x4090 because I get some bluescreens, maybe because the power is not enough from my 1600Watt Corsair. The reason I need such a faster computer is that I do VFX and some of the simulations in Houdini can take an hour to do and you need to iterate 50 times on one simultion. Then rendering comes into place the the GPUs help a LOT. Still I would like to have even faster, my current dream is a 2x128 core machine, but sadly the Epycs have so low clock speeds.
![Ultimate-ULTIMATE 3D Rendering Workstation Build [$19000] | AMD 3995WX + ASUS 2x RTX 3090](http://i.ytimg.com/vi/jw_mnwo9Nag/mqdefault.jpg)
![Ultimate-ULTIMATE 3D Rendering Workstation Build [$19000] | AMD 3995WX + ASUS 2x RTX 3090](/img/tr.png)
Perfect PC for school work.
We gonna get out the zoom call with this one‼️‼️🔥🔥🥶🗣️🗣️
Bro That One School U Can't afford....😭
Perfect for school development 🤣
I agree
No more xvideoz page cannot be found...
Finally, a PC perfect for watching 1080p RUclips videos on.
Besides the absolute overkill of this PC my favorite part is how fast that Threadripper tears through R23 like it was nothing.
Overkill?? Wth?
Nothing is overkill for 3D.
Yeah, R24 hits differently! But, yeah CPU's are getting fast enough that R23 is getting to the point where it's not putting enough of a demand on the CPU over R24.
They don't call it the *Threadripper* for no reason
Not overkill at all I would full utilize it for Cinema4D/Redshift and Houdini (as much RAM and as many CPU cores as possible for sims!) There literally IS no overkill.
Imagining this will only cost a 5th of the price in 10 years is crazy to me
By then a 13 yr old will own that and will call it "mid ranged"
@@AsianSwagMstr ikr when rtx came out i thought i would never be able to afford it now i got rtx 3070 cheap asf
@@rylee1395 i got a prebuilt for 900$ and it has a 4060 and 13th gen i5 lol
@@rylee1395 I think it’s because in 2021 gpus were extremely expensive, because of crypto.
For example a 3070 costed $1,600 in my country, now it’s $500 lol
sadly itll be worthless by then, just as how 10 year old workstation builds are worthless now... they're used for professional work, and professional work can not afford to be done at a snail's pace.
Bro uploads in 8k what a chad.
"With great power, comes great electric bill." - Sun Tzu
This is one amazing build. I would not have use for it, but for those who do, in fields like research models, it is incredible!
I also love that your assistant was present! :)
i need this to enhance my shitposting
This is also useful for anyone who wants more than 3 tabs open in Chrome.
I just love how you try to get the maximum performance out by using minimal components -- that is not using fancy case or RGB lighting. I know a lot of pc builders who would undoubtedly put more bucks on these least important things. A huge shout-out for you
I am always amazed on all the high quality profesional content you create for all of us. I used one of your videos to make my new pc replacing my old i7 first gen build from 2010! Thank you for all your creativity at all levels!
Wow, thank you!
how name thenology name a 3 rtx 4090 work in simultan , i know is not SLI but how name actualy is name ?@@theTechNotice
Bro about to render the reality of whole multiverses.
Nice build! The next upgrade should be to use 4 RTX 4090s on waterblocks and use Phanteks D30-140 fans (to reduce wires).
Nah finna be 4 5090s with a threadripper 7995iforgorletter
Pc🔥🔥🔥🥶🥶🥶🥶🗣️🗣️🗣️
hold on i just found out Nvidia stoped SLI support from rtx20 series.
how does he connects multiple 4090 ?
whats going on ?
@@atrocitus9198 sli is for gaming. if you have the proper motherboard for multiple gpus certain programs can still utilize them all.
WTF isn't it watercooled ALREADY???
@@atrocitus9198 SLI is only for Gaming, for rendering etc. you simply put as much GPUs in as you can afford and the software can utilize them.
I like the idea of the power draw- but people can’t really quantify that unless they buy pcs and test them like you, so it would be better to do a render test like the blender classroom and see how long it takes
What a dope way to celebrate him!! He’s an all time legend that I wish more people would appreciate!
@Muskeln-kaufende Imagine conflating a scientist with the actions of a Government.
Or better yet, blame the Emperor for attacking Pearl Harbor.
Those citizens died because the Japanese Empire couldn't keep their dick in their pants.
ah yes of course, how can we forget to celebrate the one and only brother amongst us that developed the weapon that can destroy all life on earth. Such a memorable, honorable gentleman.
Eh, the movie was rather intent on not idolizing the guy, or flattering him in an overly positive manner, and for good reason
oppenheimer PC 🤯🤯🤯 a BOMB in term of performance completely exploding every benchmark!!!
I feel like if it has custom water cooling, it wouldn't look a bit too crowded, but hey!! Props for you to making it all work❤️
Performance - 10
Aesthetic/looks - 2
that case is the worst case for this particular build.
@@reevus01Hey Einstein, what are you doing here..? 🧐🤣
exactly. if he built a custom loop, the gpus would just sit in the pcie slots. ive built 7gpu workstations with ekwb blocks and it looks slick. not like this abomination.
Finally... I can open more than 1 chrome tab.
But seriously, there are no words to describe the beauty of this pc. Tech Notice ROCKS!
On the A6000 it all depends on your scene sizes for models, texturing, shading. You can load it all into the gpu card memory.
The top spot on 3Dmark Time Spy is held by a pc with 4 A6000s.
@@bengineering3d *3D Mark Time Spy Extreme
Man this is an absolute monster pc for complex high end 3D video rendering.
the reason for the cpu not being so hot with cinebench, is because it uses all the cores they stay at base clock ~2.8ghz, but with the 32 core bench they boost up to 4Ghz. that's where you can tell if the cooler is enough or not, because is very hard to remove all that focused heat from the die's specific areas. it seems to be ok.
Yea but it that because of throttling in the first place… 32 cores won’t get as hot as 128… a system that nerfs itself is counter productive. Why pay for half of the performance promised?
25:38 TOP G
This is every 3D Artist dream, i love the edit. The music transitions are spot on, and the whole video has auch a good vibe to it🤩🤩🤩
Glad you like it!
@@max.racing The best rendering software to use multiple gpus is NVIDIA OMNIVERSE it has a TRUE RAY TRACING and full on support for multiple gpus😎😎😎
@@max.racing Depends what software you use. For example, in some that support remote render farms, typically you can also treat your own pc as a render farm and utilize all registered GPUs. But u gotta check with the software in question, results may vary.
@@max.racing afaik the consumer nvidia cards do not pool vram with most render engines, i heard nvlink does work with pooling on consumer cards if you force it but nvidia gimped it and might continue to do so. workstation cards are better for these type of things since they're supported. rip heavy scenes if they exceed 24gb vram.
i never get tired of watching all kinds of pc builds but i may be reaching a limit
Oppenheimer could have easyly simulated the consequences of his diabolical work, to himself and mankind!
The little fella is the double of his dad. Top end pc and an amazing well put together vid. And im sure the little guy will be following in his old mans footsteps 1 day.
LOL, great intro!
You post such good content about 'STRONG' computers, you are among the first I go to when it comes to hardware that can really blast!
For my artwork I need super good processing (3D) and also GPU power.
So I really appreciate the info you give out!
I think for most people single core performance also matters.
So i9 13900k with 2 RTX 4090 is great.
96GB or 192 GB ram
Water cooling the GPU could have saved some space.
Wondering what AMD Bergamo chip build would be like as it's more into high-end server / workstation chip
Running some Houdini/Embergen smoke and liquid simulations or just rendering full scale movie scenes in blender-cycles/maya Vray would be bonkers.
Bro that's more expensive than my house 😭😭😭 fr
I like the video and intro, but at this price point would make more sense to run a custom loop for a cleanliness and better airflow within the case. While the rig is undoubtedly high end, it kinda looks like a hot mess.
Apparently you didn’t watch the whole video
Every After Effects Editors dream 😮
Amazing system, the reason that furmark ran hotter was it jumped to 4ghz, while cinebench with all threads was at 3ghz.
Love the build my bro
11:00 - You can but no in RAID mode. AMD PCIe RAID will NOT allow you to boot with 13x SSD's connected - I tested it on the same motherboard 🙂
50:50 - No you won't because you forget about the efficiency of the power supply. It is 94.29% @ 1600W, so you can take up to 1697W from the wall.
BTW, I'm using the same motherboard with 3995x and 256GB of consumer DDR4-3200 CL10 (because I can).
This would be so intense to even build haha, i mean damn i would be sweating when dropin in those parts haha..Love the way threadriper socket works.
Love your channel ! You're the only one I know of showcasing true Workstation builds. I'm so tired of watching gaming PC builds.
I'm old and retired but I built an almost identical Workstation for my CG hobby. However, I do run CPU & GPU's on a simple soft tube custom loop, it really cleans things up. ( Think Un-Janky ) My main tools are Solidworks, C4D & Redshift.
I was pulling 1,780 Watts from the wall for my one hour stress test / burn-in using AIDA64. No issues popped up.
Selling All my organs is not enough I think 😂😂😂
😅
Wonder what air flow is like in that. Seems a little cramped
amazing work, you're a magician of your own work.
keep it up, much love and respect.
Thank you very much!
@theTechNotice why did you not choose the Xeon instead
There a so many Videos on RUclips with so expensiv PC! But you are the first who is telling us why? This is much better! Much love bro
THAT PC IS A BEAST
Oh Yeah!
Dude, if you spend 50k to have this, (and play 8k/120fps lol) I'm sure you can squeeze another 2k at most and make the system an entire hard tubing water-cooled system, and include the GPUs in it with replacing all the GPU radiators with water-block and active backplates. This way you will have more than enough space to arrange them looking beautifully, and keeping them much cooler at the same time. because let's admit it, no matter how many fans you stuff in that case, 3x4090 and everything else in there will make that case warm up like a fireplace.
RUclips show off u can call it… this is one cap😂 creator rig for yt TikTok? Videos😂😂. Seriously people who do rtx a6000 for 3D rendering or content
Surprised there’s not a full loop for this level of PC. Seems like it would be a way to avoid some of the mess with the side of the cards 😂. Insane build tho!
0:01 Whats the Music title here ,
Also always cool to Top quality production on your videos...
whoever the videographers and editors are Props to them
you deserve millions of subs great work.🤩🔥
Thank you so much 😀
I am using a pretty old case - Thermaltake Core WP100. It has enough space to house virtually anything, even though it also has some drawbacks.
Damn, these videos are so professionally edited!
professional editor :)
This is incredible! I had no idea they went so high. My desktop is 8 years old and still running windows 8. This is how cutting edge I am.
I'm going to use this setup for editing my tiktok videos😂
Thinking of a way to convince my boss that I need this for webdev stuff
You could show him windows maxing out the memory?
@@pazsion yes
this is insane🔥
yeah, pretty much!
@@theTechNotice you just gained a new subscriber love from india
I had a similar build during the pandemic. Work allowed me to build a workstation based on a Tr 3995x, 256Gb, designare board, 10tbx8 raid array + 2x8tb ssd and two office-suppied A5000.
Very good explanation for TR workstation build~! I enjoyed it.
The latest BIOS version is 1201, from which you can control fan speed. Of course, that is still possible at IPMI.
To see 8 sticks of RAM in monitoring programs, set Server Mgmt menu -> BMC DRAM SMBUS Switch -> BIOS
The latest firmware version of BMC is 1.32.
I believe that you already chaged the password of the administrator account in IPMI.
As you know, the strict secure principle of BMC/IPMI makes several inconveniences
1) RMA not direct AS
2) Can't use sensors to control the workstaion but can read parts of them.
In more detail, one prefer to control customly water-cooled system based on temperature of coolant. In air-cooling system, one may control fan speeds & RGB based on temperatures of CPU, VRM, etc. Via IPMI & BIOS/UEFI, we can control system fans. But we can not use T-sensor for controling speed of water pump in other utilities, just read the value of it.
And there are other facts that we may happen to see during the build. So, I'd like to recommend any usb herb of PWM & Sensor ports like Quadro or Octo, etc.
Crazy, you just keep pumping out amazing builds loaded with so much detailed info. I will be building a Threadripper Pro system soon, probably of the 7000 series. Great work, best video yet. "1400 watts" Your reaction, priceless.
You may want to look into getting a Superflower 2000W Leadex Platinum PSU. Suplerflower is the manufacturer of the EVGA G2, G3, P2, P3, and T2 lines of PSUs. They are very good power supplies.
I would also recommend getting a sheet of Honeywell PTM7950 for the CPU die, instead of paste
Phase change materials?!
@pazsion Yes. It seems to work quite well so far for me.
In my experience with PC building over the last 24 years, my advice is to never skimp on the power supply. Always buy the best power supply money can buy. Also, I have found through my experience that EVGA makes the best highest bin parts. I have had so many power supplies fail, even my brothers platinum rated 850w Seasonic power supply failed after only a few years of constant use. I built my then top of the line gaming computer in May 2017, and have ran it nonstop with the same EVGA 1000w T2 14+ hours a day.
@UltimateEnd0 The T2 is a solid PSU, built by Superflower. I probably wouldn't buy the Forton Source Power built PSU's from EVGA, personally.
Amazing build, but why not custom water cool to better cool the cards and get more space for them.
Was thinking the same, 50K and not even water cooled
this aint for 3d rendering this is for real life rendering at 140FPS
I've never seen this many time stamps in a single video, HOLLY !!!!!
Great video
linus is watching you..
Love your channel. It's so great to see builds for animation pros and not just gaming. Currently doing research fot my next build for running Unreal Engine and local AI.
Now this is the content I subbed for! lol. Now that I've seen this build, I dream of a rack-style build of similar scale, but with full watercooling on all components both for space management and performance. And a slim rack like that could even hang on a wall as a standalone pc, which is something I intend to build sometime in the future.
Great work, and editing is top notch as always.
bruh! they must be paid good as 3d artists
Oh yeah
bruh! i followed you when you were at 30k Subscribers now you have reached 178k! amazing! love your content ❤
It's unfortunate that Nvidia got greedy(ier) and no longer offer nvlink like they did on 3090. Would be even beastier to be able to daisy-chain them together with shared memory...
Sli is on the motherboard now…
But yes it would be nice to maintain x16 across all slots. Perhaps having that physical pathway could bypass the bottlenecks and software limits.
You can even shared resources and gpu inside the network or cloud now or make your own.
I can imagine this thing feels insane working and rendering stuff in 3d!
I can't wait for 2033 so we can laugh at this pc
I've been thinking about doing a PC Build with this motherboard. Would this motherboard & CPU be perfect for a server for an already existing company?
sendin emails at 99999+ fps
People can say whatever they want about how it looks estheticly and all but I am with you brethren, as long as it stays under 70 degrees and stay kool while running heavy load then thats all that matters. Performance over looks. Just keep it like that bro, it may look janky but it doesnt matter because it excels in performance and not looks. Great job on building this monstrous pc😊
My dream pc...🤣🤣🤣🤣
Same!
This PC has its own electricity bill
Ddr4?!? Lmfao
48:45 holy sheeet🤯
Aren't you drawing heat from the top GPU into your CPU? It's cool enough but i'd flip the tower so it draws air from the front of the case and exhausts it out the back.
Unique channel here - 8k. Once as i know from all pc channels on yt.
awesome build!!! WOW! How would this machine do when rendering youtube videos ? I see rendering YT video use all CPU's/threads at almost 100% with a 13900K. The 13900K renders YT videos in 5 minutes or less for an hour+ of 1080p. Could you render a YT video on a machine like this and show how it reacts?
What rendering of RUclips videos actually uses your hardware?
Now i as video editor understand why i suck with i7 and 32 gb ram... 4070 ti... The 3D VFX modeler and editor build guy dominates me at gaming 😂
This video should go in the satisfaction video category. I was searching for a pc build that goes over overboard and I got this one
😇😉
This is more than minimum recommended for most software?? How?
@@pazsionyou won't get it
Finally now I can play crisis at 1080p low 🎉
There's such an essay solution to the space issue here. Just watercool the GPUs and make them 2 slot. Easy. Done.
I've got a Cooler Master EVO 700,which is an absolutely humongous case, but I needed some separation between a very hot RAID card, 25Gbit SFP28 NIC and the graphics card. The 4090 taking nearly 4 slots was a nightmare, so I had no choice other than to watercool the GPU or the cards would be really close to one another.
I'm late to comment, but something you forgot to mention in the comparison between 4090's and the A6000 Ada is ECC; it's not just the VRAM difference. For many people that's a non-factor, and you're absolutely right on the peformance/price comparison, but there are situations where a professional would require ECC. I don't agree with what I would argue is malicious market segmentation on ECC, whether it be on regular dimms or VRAM, but if someone needs the guarantees provided by ECC, then they have to bite the bullet on that cost.
Now let us see some juicy vid of you playing cyberpunk 2077 everything maxed AND path tracing with ray tracing :)
It’s not for gaming, it’s a workstation for content creation and other things
That max power draw is actually pretty impressive when you considered the cards it has installed aht eCPU, 6A on a 230v system
finally a pc perfect for gta 6
Na, DCS in VR😂
This is truly beautiful!! I've been looking for a way to put two RTX4090s (non-liquid cards) into a Lian Li O11 DEVO XL case. Not easy job.
Should have used the Corsair 1000D
this is freakin insane.
Unbelievable what these mainboards are capable of !
mom: why do you need this massive and expensive pc-
that one kid: SHCOOL WORK
yes mom i need it for the zoom classes
Handling one gpu is already a headache.... 3 of them is not an overkill.... Its a threat 😂
nice pc build🤩🤩, but i will not say that Nvidia 4090 is better than the Nvidia rtx a 6000 series card because most of them have around 48 of vram compared to the 4090 which only has 24 of vram so having having 2 Nvidia a 6000 card with NV link is more powerful than the three Nvidia 4090 series mainly for 3d work and gaming what your take on that???
How much improvement do you gain by putting an extra GPU on top of one you already have ?
I've heard the margin of improvements are really small.
Awesome build. I’m curious though, why not build one with two of the 2nd fastest CPUs instead of one of the fastest? Are creator programs just not good utilizing them or are they glitchy?
Multi socket motherboards exist but only for CPUs which support multi CPU operations. Consumer CPUs do not support, AMD Epyc supports 2 CPUs while Intel Xeon up to 8 CPUs per motherboard. CPU must be designed to support multi socket operation.
@@Devil-024 thx
the 4090 gpu cooler definitely improved over the last 90 series
Thermaltake WP100 or Core WP200 offers the best bang for the buck cases for multiple GPU setups.
Its a realy awesome build. I love the phanteks case! have one myself. To be fair though, you could have watercooled the CPU with a custom Loop (AIOs are just shit), overclocked it, and ssqueezed out a bit more juice ;) For absolute overkill, slap a watercooler on the GPU, overclock that and get the utmost out while tempteratures are still lower than aircooled and overclocked.
How are the 4090s working together without sli?
This is similar to my workstation. I have a 2990 64 core AMD with 256GB RAM and 3x4090 Cards. I do think I will move over to using only 2x4090 because I get some bluescreens, maybe because the power is not enough from my 1600Watt Corsair. The reason I need such a faster computer is that I do VFX and some of the simulations in Houdini can take an hour to do and you need to iterate 50 times on one simultion. Then rendering comes into place the the GPUs help a LOT. Still I would like to have even faster, my current dream is a 2x128 core machine, but sadly the Epycs have so low clock speeds.
Bro This is Amazing PC and so inspiring thanks a ton for sharing this Bro, wish more success for you channel bro 👍👍👍
Is the AMD CPU threadripoer still the best
Schön. Aber warum keine Wasserkühlung?