Being a reefer as we call it is hard work days can be long and all the equipment we need to do jobs is crazy and that also means lugging it all the way up to roof tops etc makes me wonder if I should have became an electrician instead
I am a facility services manager at a hospital. Trust me, your commitment to not only repair, but "FIX" the units are greatly appreciated, because there is a difference. Sometimes it costs a little more, but it saves $$ in the long run for multiple return repairs. Well done. 👍👍
I appreciate the fact that you as a facility manager understand the importance of keeping your equipment in good shape. Drives me up the wall when people dont spend the money to keep things neat, tidy, and in the cleanest state it can be.
You're so right, preparation is key. Hydration and shelter is so underrated. I appreciate the fact that you spoke of the importance of that. Too many young guys go to work outdoors in the heat and don't realize that they are literally killing themselves for a paycheck! Thumbs up man!
I had flashbacks!! I moved to Phoenix AZ from Washington State and the first job I did was to replace both compressors on Trane 10ton pack HP on metel tin roof and temps peaked out in the 120s. This repair hits home for me!! I got really sick that day!!
I remember asking a couple of months ago about where to start in hvac I graduated this past December and now I landed a good job with refrigeration & hvac and it’s pretty cool i get paid pretty good also and these videos help me when I’m stuck on some jobs.
Good advice on shocking your body with temperature extremes. I learned the hard way during a high school band trip to Florida (December 1995). We had been practicing marching technique in a parking lot on a 90-degree day, required to wear long pants and long sleeves to protect us from the sun (which wasn't a problem in similar temperatures during our summer practices, but nobody seemed to figure that out). No matter how many times I alerted drum majors or staff that I was experiencing dizziness, difficulty breathing, coordination issues (I actually tripped over my own feet and fell with my snare drum breaking my fall), I had progressed from sweating profusely to shivering cold with goosebumps, and all my complaints fell on deaf ears. When I complained that the blue sky was orange, the parking lot was burgundy, and people around me looked pale blue in color, they finally took notice. Practice was cut, and we all returned to the charter buses that had been sitting for hours idling with the AC on full blast. The shock to my body was incredible. I had stomach cramps, extremely painful muscle cramps, nausea, and at one point I began complaining about how hot the bus was while returning to a profusely sweating state, until finally my core temperature returned to normal and life went on as "normal." It took three hours before my body would accept any beverage without promptly ejecting said liquid the same way it had been delivered. Good to know you are taking the necessary precautions to prevent/mitigate any heat-related health concerns. I have profound respect for techs that can be up on a roof for hours, not only do you get blasted by the sun, you get the heat radiating off the deck. Also good to see businesses shifting to white roof coatings over the years - once (AND ONLY ONCE) did I re-tar a flat black roof of an auto shop I worked at, and man, it was hell. (Especially when I almost fell through the rusted-out corrugated steel roof from the 1960s that had more leaks than it did intact portions - every time it rained we had to squeegee out the service bays and dodge puddles/drips while working. It's hard to detail a Mercedes E-Class when rusty water keeps dripping onto the paint!)
Man...I feel you on the heat. It has been way too hot. I was wondering why my mini-split wasn't keeping up with the heat this last week.......and it helped to actually clean off the condenser and evap. Whoops lol.
I love how although you’re a great tech, you still say stuff like “hope it doesn’t blow up” after you disassemble and repair a unit. Makes me feel great doing what I do too haha.
Between my pop up tent and the umbrella with the magnet on the bottom I got from TruTech I never work in direct sun anymore. It’s well worth the extra time to set it up to keep the sun from beating down on you lol.
Hi Chris, That's impressive how you handled that day's work, and how planning pays off. I will often stop and eat if on the way to site later in the day, because once on site, one does not know when one will see food again. The EZ up is a game changer, and it's not bad to take it with and putting it up. Any extra comfort makes it easier to concentrate on the job and do quality work. I was up on my dad's roof sealing roof nails today as all the seals have failed, it's a flat metal roof. Had the right sealer and brush to apply, so it went well but man was it windy up there as we are not done with the snow for the season here, so it blows up a gale the few days before it snows to the south and we get what's left over as rain here in the central parts of South Africa. Nice one, I enjoyed the show. Best regards, Duncan
When we do roof top repairs / structural / in extremely hot conditions we all hydrate from the start.... Not just H2O but a BodyArmor or Gatorade drink... Seems to us as more effective than water. That said, a full day up in 120F is brutal. You get the medal today.
Thank you, CHRIS for your informative video. I moved to the desert from beach cities. The a/c broke down last June at 115° and again this year as temp reached 108 degrees indoor temps no lower than 80, HVAC repair is coming tomorrow and I am ready because of your detailed explanations I am now savvy. Many many thanks~ you’re wonderful.
I was sent out on a warranty call. 3 month old ics box, different company installed all equipment. Quick connect line set, had a restriction on liquid line quick connect inside cooler. Recovered unit and cut quick connect’s out and found white powered/ broken beads clogging everything. Emerson drier installed inside condenser at the factory. Manufacturer ended up sending us new equipment and normal line set. They gave us the clear to cut the drier, no filter beads inside of it. One of the other guys had a video of us cutting it open and being empty. Attached that to the WO. Sporlan all the way.
Great video! I really appreciate your follow-up discussion and review of strategy -- in planning the job ahead, rounding up the materials in advance, and the way you go about executing the plan in such extreme heat. Without that kind of prep, a tech could reach his limit early in the job and then start taking shortcuts to wrap up and get off the roof as soon as he could. And the quality of the repair would be compromised. Thanks for all the good advice.
Also, I wanted to say, your big picture approach has helped me in areas I work in. It can be applied to any problem solving situation. Thank you for sharing your knowledge, always room to learn!
I saw one video. And man I got hooked. Today that I didn't have work I've just been watching your videos all day. I think I've watched like 8 or 9 videos today. Keep up the good work!
Panama City Florida I had to work on a couple R22 condenser units in a small room with 8 two ton condenser units and no forced circulation, just a couple of louvres. the temp in the room was 134 f. The worst part was having to wear gloves because my metal tools also became 134 degrees after awhile and we too hot to pick up barehanded. And they love putting the fancoil units in the attics there. A roof in the valley on a hot day is just as bad.
Crazy heat, over here on the east coast u get the humidity that sucks the motivation right out of u. I took my name off this account and I'm going to start my own soon. Used to be miles and nina... thx for the great video guy.
I have a love/hate relationship with your videos. They're very thorough and well made, however, as a former HVAC/R tech the videos brings up past traumas and nightmare calls. Keep up the great work in the field and online.
Nice! Sometimes it's best to pull stuff out of the way like that. Good tip on the ball valves in the vacuum set up. I've found cycling them once under a deep vacuum seems to clear any air/refer bubble that may be trapped. Magnetic core removers are sweet, too. That's a great idea; I'm always trying to do a balancing act with mine
Chris, I'm glad you respect the heat and are taking care of yourself. Even with the cautions you were taking, I could hear the heat getting to you during the latter part of the repair. We don't have insane 120F heat waves here in NWFL, but we do have humidity, which allows heat indexes to get nearly that high. (The calculator I used to run the numbers gave me an "EXTREME DANGER: Heat stroke imminent!" when I entered your conditions.....)
Good job and being prepared goes along way towards getting the job done faster and better! You should eat and take proper breaks at strategic times like right after you hook up the vaccum pump! So you have a good healthy job flow! With that unit being exposed to air for that long I would have added a little acid away to that system! Thanks for another awesome video!
Shiiiit i could NOT work in 120 degrees at all, 90 degrees is my draw point as humid as it gets here 70 degrees can feel like 90, idk how you do it bro, these hvac videos are awesome! Keep it up and take care of yourself out there!
Chris considers 30-40 percent " humid ". Now that's some funny shit. I would love to see chris do work somewhere like florida. Up here in the midwest it's been 50-60 percent humidity with low to mid 80 degree outdoor temps.
@@HVACRVIDEOS my western german basement would drive you nuts. I keep a dehumidifier runningto keep humidity level at 60% max. During winter it may drop down to 20%. Yeah, allright, unfair advantage, over 25 °C we consider it geting hot here... Thats also why you would not find that many ACs here after all compared to your part of the world. Going around the house you more likely stumble upon a heat pump used mainly or exclusively for heating if done right. If not, electricity will cost you a fortune and some.
I have had a lot of trouble with those black valve core removal tools that you used. They tend to leak at the ball valve stem making pulling a deep vacuum/passing a decay test challenging. I like using the brass gate valve ones whenever possible, the only problem is they don't have a micron gauge port.
@@andreevega7470 Sure does wake ya up dont it! Bwahahaha 😃. Then for a awhile after you get near anything hot and hands start to tremble! Bwahahaha been there
As gardener I can attest that any shade is good shade -take precautions, wear sun lotion with a high factor -long sleeved shirts -sunglasses -drink water and a have a source of electrolytes if you're sweating buckets -take short breaks and do a sanity check. -remember to eat something in advance if you know lunch won't be anytime soon. (I recommend homemade sandwiches in a cooler, cuz cheap and quick, can even be eaten one handed) -HEARING PROTECTION! I can't tell say this enough, have a set on you at all times. Your hearing will only get worse, never better. -Vibration protection, (gloves). -Breathing protection, a dust mask at least. (fine Silica dust stays in your lungs, also known as cystic fibrosis) - First aid and CPR course in case somebody goes down and needs help.
Well Chris, it could always be worse. You could be up here in Winnipeg. In January. “It’s -40 outside with bitter Arctic windchills, twenty service calls for furnaces that quit, and my service van won’t start because I forgot to plug it in last night.”
enjoy the video's i like watching people describe working and their jobs. I have no idea what most of what you are talking about except in the most general sense. I have no idea how hvac systems work so watching you fix them is fun. I mostly just know computers and you make watching random video's about walk in freezers a daily event for me :)
I understand the drier preference, have used sporlan for years,also their sight glasses are tops.When I use other sightglasses,or seems the minister indicator,always turns black.I just finished a 407c retro from 22 on a 30 ton Liebert crac unit,one glass was Sporlan and the other a close relative,and sure enough the non doorman went black,makes me crazy,that I used the same exact process and both went black,the Sporlans beautiful green!
It's more forgiving on the charge amount R410 is more critical on the charge amount . It doesn't take much to over charge with a R410 system the other thing with the blends if there is a small leak got to remove and recharge with fresh charge can't top off because the blends is out of wack the pressures can look right but not be working very well . Now the industry is try to go to butane . Very flammable.
@@sven33r Ich kenne nur die aus den Supermärkten die hängen oftmals außen an der wand und nicht auf dem dach weil wir bei uns kaum Dächer haben wie die Amis. Außerdem werden die bei uns regelmäßig inspiziert, es kann also fast nie so schlimm kommen wie bei ihm in den Videos.
I was a bit surprised to see you put that hot dryer in the back where it was basically inaccessible. I though you would have done some pipe rerouting to get both of them out in front where they would be easy to replace later.
Instead of using washers to line up the fan motor maybe use panel spacers. They use them when spacing fenders in cars C shaped so you don't have to remove the bolt and come in kit with bunch of thickness.
heat cramps, heat exhaustion, heat stroke. very serious conditions and you're right; it's easy to forget to check yourself. I was in the army for ten years, and they take it very seriously!
i only work at nigt when is to hot in the day time :) i have 3 friends that past away (all 3 heart attack, and 2 with children ) in the last 3 years at age 36, 38, and 42 and I am 35 ...
A: why isnt the cabling in ribbed conduit ? B : do you have a H&S safety keep in touch procedure ? We had a call centre that would monitor us in remote areas and contact us regularly for finish and travel home eta's . Kudo's for working in heat . You do need to learn first aid and understand Heat stroke . We have 45 c days here in our summer as well . Lunch can be just diced watermelon , grapes , peaches , kiwi fruit
I give u credit for putting 2 driers in. I usually remove the strainer and straight pipe it, replace the check valves, and throw a 163S filter drier in the location that's easiest to replace. Just if it ever needed to be changed in the future. That other drier is gonna be a bitch to remove if it ever gets clogged... But good job!!! It gets humid here in N. Carolina but damn!!! 115 in the shade...
AZ in the summer, being a commercial hvac repair who has to go on the roofs.. think you would have to bring a portable ac and a enclosed tent around the hvac equipment. Its dangerous work head stroke heat exhaustion. Hopefully its good money. AC in AZ in the summer time is as important as Heat in the arctic.
Noticed that we have a few of the same tools and equipment!!!! Which is awesome! It's like Seeing a player on your favorite team and having the same cleats. Lmao!!!
We had an old Bryant RTU similar this one at my school, just as dirty and rusty. It just sat there on the floor in the corner of the shop being used as a storage table.
Great video. I work In facility maintenance the only thing I would do different is put something on the feet of the tent to protect the roof. Maybe I couldn’t see something. Enjoy the videos keep up the great work.
If I had to do your job, in 115 heat, I would fall over dead! I think your videos are a great help to people who are new to the business. Especially how you instruct the viewers with out talking down to people or assuming they are stupid. No one likes that, and it really does not help people to learn what you are teaching. We have all had instructors who taught like that !
Great video as always bro. Head pressure was high but I guess load and ambient temp. Those check valves are a pain been there. I watch a bunch of your videos and You remind me of me love and it. I’ll be in touch
Last winter it was single digits and I spent 30ish minutes outside then went straight in to put belts on a main blower (8' blower) while it was 145 in there. I felt bad for the rest of the day and my skin was dry. Wouldn't recommend doing that.
You could look into getting K-Flex Insulation to put in between the vibration of piping it comes in .5 or 1inch thickness. Sheets or rolls. Plus incase the wires in Sealtight if worried about the wires cutting. Just IMO. Those motors always have problems braket cracks and breaks or rubber grommets wear out. As a pass Bryant dealer it was one of my biggest complaints. Always have to be aware of the weather. Great video on the importance of to be sure you have the correct parts. Thank you.
One thing that helped me with my welds, I use a 0 tip and then turn up the pressure on my regulators. It gives me a more controllable flame without torching more area than what I want. At least that seems to work for me.
Wow that was a lot of work and R22 for that old unit! You guys did a good job to get it running again. I would have tucked the fan wiring back down under the grill. Good job guys! 👍
I too have diabetes. What youll likely find is all your relatives have it too especially if they're Irish. I didnt get it till i was in my late 40s as did all my family. They call it onset set diabetes type 2.
22:49 - same thing applies when performing/working in costume, thick workwear, protective clothing, etc. for a good while, and then when it's time to get out, do it slowly, as not to shock your body with the cold.
The only thing you are missing from your hot day roof kit is the cooling mister kit for the ez up. Or one of the ones on a stand you put right next to you.
Lmafo hahahaha I feel you bro .... Im in Phoenix its been 115 in the shade for 3 weeks straight on a roof surface temps are 135-140 in an attic its 160.. 120 is a cool day in Phx
I take it you guys just flat out don't do attic work in the summer? 160f is literally hot enough to cook the salmonella out of chicken. So sending someone up into that without measures against the heat is basically a death sentence unless you only stay up there like 5 minutes at a time and then a half-hour break to cool off again. NASA has a solution for that, before you put on a space suit you put on what's called a liquid cooling garment which is basically a spandex long sleeved shirt and spandex leggings with small tubes sewn in to it that circulate water that is run thru a block of ice (ice sublimation chiller) in the space suit backpack. Could do something similar for use in a hot attic, but you'd have to swap out the ice sublimation chiller for something that would work in earth's atmosphere, probably just a cooler full of ice water would work. That's too heavy for space but it would work perfect on the ground. If that sounds too complex, you could make a suit that holds a bunch of those gel ice packs next to your skin (most importantly on your belly and your back, as that's where you would be able to keep your core temperature down) but you wouldn't be able to control your temperature as easily as with the liquid cooling garment where you could just control the speed of the water going thru the tubes to control how much cooling you get.
God, I don't know how you guys work in that heat. Around here 95ish is usually the most we get and that is bad enough. Yeah, I only saw a drier break down 1 time an Alco, filled the liquid line with pellets. Good job Chris!!
Typical summer in the great Inland Empire /Coachella Valley. Gosh I miss living there. Live in the southeast and what 120F there feels like its at 85-90 here.
The heat is no joke for sure. Ive gotten sick from it before 106 degrees high humidity, south carolina, out in a salvage yard. Even though I kept hydrated it had me sick for almost a week. I thought I can keep going.... yea then the vision goes blurry..... not good.
The only issue that I've seen with the desiccant breaking up into the system is green techs replacing a muffler (compressor discharge vapor) with a drier. I do prefer the Sporlan Catch-All driers but nothing will survive on the discharge line. Mistakes happen (great learning expense), glad they were at least thinking to replace the drier on a refrigeration repair. 👍
I had one of those beads on the filter dryer to clog the Condenser and it also blew the valves on the compressor It took some work to get the jammed beads cleared!!! Only once I seen that on 16Years in the trade!!!
I have never worked in HVAC, have no intention to work in HVAC, but man I find these videos interesting.
Fair enough man, it's not for everyone.
Same here... i just find these videos very intersting and why I subscribed.
I do this all day and then come home and watch someone else work. I must be sick in the head lol.
@@hightide9513 Same here.
Being a reefer as we call it is hard work days can be long and all the equipment we need to do jobs is crazy and that also means lugging it all the way up to roof tops etc makes me wonder if I should have became an electrician instead
I’m 14 and I watch your videos and I can’t wait till I’m older and go in a trade and do this, right now I fix and sell window air conditioners lol
I am a facility services manager at a hospital. Trust me, your commitment to not only repair, but "FIX" the units are greatly appreciated, because there is a difference. Sometimes it costs a little more, but it saves $$ in the long run for multiple return repairs. Well done. 👍👍
I appreciate the fact that you as a facility manager understand the importance of keeping your equipment in good shape. Drives me up the wall when people dont spend the money to keep things neat, tidy, and in the cleanest state it can be.
I am a service dispatcher for an HVACR company and use your videos to better understand the terms my technicians use!
So cool that you explain each thought process it makes it so interesting.
You're so right, preparation is key. Hydration and shelter is so underrated. I appreciate the fact that you spoke of the importance of that. Too many young guys go to work outdoors in the heat and don't realize that they are literally killing themselves for a paycheck! Thumbs up man!
120 in 25% humidity! That is wet bulb over 87, leathal heat, good to see you take care of yourself.
I had flashbacks!! I moved to Phoenix AZ from Washington State and the first job I did was to replace both compressors on Trane 10ton pack HP on metel tin roof and temps peaked out in the 120s. This repair hits home for me!! I got really sick that day!!
I remember asking a couple of months ago about where to start in hvac I graduated this past December and now I landed a good job with refrigeration & hvac and it’s pretty cool i get paid pretty good also and these videos help me when I’m stuck on some jobs.
School started up again. Different teacher this year and he started plugging your show! So i showed him my shirt, couple people inquired about them.
thats cool thanks man!
Good advice on shocking your body with temperature extremes. I learned the hard way during a high school band trip to Florida (December 1995). We had been practicing marching technique in a parking lot on a 90-degree day, required to wear long pants and long sleeves to protect us from the sun (which wasn't a problem in similar temperatures during our summer practices, but nobody seemed to figure that out). No matter how many times I alerted drum majors or staff that I was experiencing dizziness, difficulty breathing, coordination issues (I actually tripped over my own feet and fell with my snare drum breaking my fall), I had progressed from sweating profusely to shivering cold with goosebumps, and all my complaints fell on deaf ears. When I complained that the blue sky was orange, the parking lot was burgundy, and people around me looked pale blue in color, they finally took notice. Practice was cut, and we all returned to the charter buses that had been sitting for hours idling with the AC on full blast.
The shock to my body was incredible. I had stomach cramps, extremely painful muscle cramps, nausea, and at one point I began complaining about how hot the bus was while returning to a profusely sweating state, until finally my core temperature returned to normal and life went on as "normal." It took three hours before my body would accept any beverage without promptly ejecting said liquid the same way it had been delivered.
Good to know you are taking the necessary precautions to prevent/mitigate any heat-related health concerns. I have profound respect for techs that can be up on a roof for hours, not only do you get blasted by the sun, you get the heat radiating off the deck. Also good to see businesses shifting to white roof coatings over the years - once (AND ONLY ONCE) did I re-tar a flat black roof of an auto shop I worked at, and man, it was hell. (Especially when I almost fell through the rusted-out corrugated steel roof from the 1960s that had more leaks than it did intact portions - every time it rained we had to squeegee out the service bays and dodge puddles/drips while working. It's hard to detail a Mercedes E-Class when rusty water keeps dripping onto the paint!)
dehydration sucks ;)
Man...I feel you on the heat. It has been way too hot. I was wondering why my mini-split wasn't keeping up with the heat this last week.......and it helped to actually clean off the condenser and evap. Whoops lol.
I love how although you’re a great tech, you still say stuff like “hope it doesn’t blow up” after you disassemble and repair a unit. Makes me feel great doing what I do too haha.
Between my pop up tent and the umbrella with the magnet on the bottom I got from TruTech I never work in direct sun anymore. It’s well worth the extra time to set it up to keep the sun from beating down on you lol.
Hi Chris,
That's impressive how you handled that day's work, and how planning pays off.
I will often stop and eat if on the way to site later in the day, because once on site, one does not know when one will see food again.
The EZ up is a game changer, and it's not bad to take it with and putting it up.
Any extra comfort makes it easier to concentrate on the job and do quality work.
I was up on my dad's roof sealing roof nails today as all the seals have failed, it's a flat metal roof.
Had the right sealer and brush to apply, so it went well but man was it windy up there as we are not done with the snow for the season here, so it blows up a gale the few days before it snows to the south and we get what's left over as rain here in the central parts of South Africa.
Nice one, I enjoyed the show.
Best regards,
Duncan
When we do roof top repairs / structural / in extremely hot conditions
we all hydrate from the start.... Not just H2O but a BodyArmor
or Gatorade drink... Seems to us as more effective than water.
That said, a full day up in 120F is brutal.
You get the medal today.
Thank you, CHRIS for your informative video. I moved to the desert from beach cities. The a/c broke down last June at 115° and again this year as temp reached 108 degrees indoor temps no lower than 80, HVAC repair is coming tomorrow and I am ready because of your detailed explanations I am now savvy. Many many thanks~ you’re wonderful.
I was sent out on a warranty call. 3 month old ics box, different company installed all equipment. Quick connect line set, had a restriction on liquid line quick connect inside cooler. Recovered unit and cut quick connect’s out and found white powered/ broken beads clogging everything. Emerson drier installed inside condenser at the factory. Manufacturer ended up sending us new equipment and normal line set. They gave us the clear to cut the drier, no filter beads inside of it. One of the other guys had a video of us cutting it open and being empty. Attached that to the WO. Sporlan all the way.
Great video! I really appreciate your follow-up discussion and review of strategy -- in planning the job ahead, rounding up the materials in advance, and the way you go about executing the plan in such extreme heat. Without that kind of prep, a tech could reach his limit early in the job and then start taking shortcuts to wrap up and get off the roof as soon as he could. And the quality of the repair would be compromised. Thanks for all the good advice.
Also, I wanted to say, your big picture approach has helped me in areas I work in. It can be applied to any problem solving situation. Thank you for sharing your knowledge, always room to learn!
I saw one video. And man I got hooked. Today that I didn't have work I've just been watching your videos all day. I think I've watched like 8 or 9 videos today. Keep up the good work!
Wow thanks bud
Panama City Florida I had to work on a couple R22 condenser units in a small room with 8 two ton condenser units and no forced circulation, just a couple of louvres. the temp in the room was 134 f. The worst part was having to wear gloves because my metal tools also became 134 degrees after awhile and we too hot to pick up barehanded. And they love putting the fancoil units in the attics there. A roof in the valley on a hot day is just as bad.
Crazy heat, over here on the east coast u get the humidity that sucks the motivation right out of u. I took my name off this account and I'm going to start my own soon. Used to be miles and nina... thx for the great video guy.
I have a love/hate relationship with your videos. They're very thorough and well made, however, as a former HVAC/R tech the videos brings up past traumas and nightmare calls. Keep up the great work in the field and online.
Yeah i could see the bad memories they would bring up.....
Great plan to start real early, I do that to get my body acclimated to the Texas heat. Excellent Video.
Nice! Sometimes it's best to pull stuff out of the way like that. Good tip on the ball valves in the vacuum set up. I've found cycling them once under a deep vacuum seems to clear any air/refer bubble that may be trapped. Magnetic core removers are sweet, too. That's a great idea; I'm always trying to do a balancing act with mine
I love how you have an "after action report" kind of segment to your shows, and take the time to explain the importance of safety. Made me subscribe!
Big Picture: first go outside and fix the 120°, replacing the outdoor thermometer with Centigrade, and watch the triple digit number fix itself.
Chris, I'm glad you respect the heat and are taking care of yourself. Even with the cautions you were taking, I could hear the heat getting to you during the latter part of the repair.
We don't have insane 120F heat waves here in NWFL, but we do have humidity, which allows heat indexes to get nearly that high.
(The calculator I used to run the numbers gave me an "EXTREME DANGER: Heat stroke imminent!" when I entered your conditions.....)
Good job and being prepared goes along way towards getting the job done faster and better! You should eat and take proper breaks at strategic times like right after you hook up the vaccum pump! So you have a good healthy job flow! With that unit being exposed to air for that long I would have added a little acid away to that system! Thanks for another awesome video!
Shiiiit i could NOT work in 120 degrees at all, 90 degrees is my draw point as humid as it gets here 70 degrees can feel like 90, idk how you do it bro, these hvac videos are awesome! Keep it up and take care of yourself out there!
Man take care of yourself out in that heat ! Great video !!
Chris considers 30-40 percent " humid ". Now that's some funny shit. I would love to see chris do work somewhere like florida. Up here in the midwest it's been 50-60 percent humidity with low to mid 80 degree outdoor temps.
Yeah like I always say we don't know what humidty is here.... 50% and we lose our minds
You have to understand 30% at 120 is really bad. I was born in the south. It’s different when the ambient is 80
@@HVACRVIDEOS my western german basement would drive you nuts. I keep a dehumidifier runningto keep humidity level at 60% max. During winter it may drop down to 20%. Yeah, allright, unfair advantage, over 25 °C we consider it geting hot here... Thats also why you would not find that many ACs here after all compared to your part of the world. Going around the house you more likely stumble upon a heat pump used mainly or exclusively for heating if done right. If not, electricity will cost you a fortune and some.
I have had a lot of trouble with those black valve core removal tools that you used. They tend to leak at the ball valve stem making pulling a deep vacuum/passing a decay test challenging. I like using the brass gate valve ones whenever possible, the only problem is they don't have a micron gauge port.
Yep ive done alot of hot ass days on roofs. Keep hydrated and keep your wits about you. Seen a few men get hurt because they wanted to cut corners.
True! Did a compressor change on a 115f day and for going quickly somehow shocked my self 460v and had the jump of my life !
@@andreevega7470 Sure does wake ya up dont it! Bwahahaha 😃. Then for a awhile after you get near anything hot and hands start to tremble! Bwahahaha been there
As gardener I can attest that any shade is good shade
-take precautions, wear sun lotion with a high factor
-long sleeved shirts
-sunglasses
-drink water and a have a source of electrolytes if you're sweating buckets
-take short breaks and do a sanity check.
-remember to eat something in advance if you know lunch won't be anytime soon. (I recommend homemade sandwiches in a cooler, cuz cheap and quick, can even be eaten one handed)
-HEARING PROTECTION! I can't tell say this enough, have a set on you at all times. Your hearing will only get worse, never better.
-Vibration protection, (gloves).
-Breathing protection, a dust mask at least. (fine Silica dust stays in your lungs, also known as cystic fibrosis)
- First aid and CPR course in case somebody goes down and needs help.
Well Chris, it could always be worse. You could be up here in Winnipeg.
In January.
“It’s -40 outside with bitter Arctic windchills, twenty service calls for furnaces that quit, and my service van won’t start because I forgot to plug it in last night.”
Damn.....
Been there, done that, Anchorage 74-78..... answer.... headbolt heaters.
enjoy the video's i like watching people describe working and their jobs. I have no idea what most of what you are talking about except in the most general sense. I have no idea how hvac systems work so watching you fix them is fun. I mostly just know computers and you make watching random video's about walk in freezers a daily event for me :)
I understand the drier preference, have used sporlan for years,also their sight glasses are tops.When I use other sightglasses,or seems the minister indicator,always turns black.I just finished a 407c retro from 22 on a 30 ton Liebert crac unit,one glass was Sporlan and the other a close relative,and sure enough the non doorman went black,makes me crazy,that I used the same exact process and both went black,the Sporlans beautiful green!
Getting a bit older and I almost can't work in direct sunlight above 90. The Easyup was totally worth the effort to set up. Smart.
Keep those R22 units going. Nice work 👌
I swear r22 runs cooler, better, less fussy. Better temp difference
It's more forgiving on the charge amount R410 is more critical on the charge amount . It doesn't take much to over charge with a R410 system the other thing with the blends if there is a small leak got to remove and recharge with fresh charge can't top off because the blends is out of wack the pressures can look right but not be working very well . Now the industry is try to go to butane . Very flammable.
Good advice about not shocking your body
Greetings from germany. Its so nice to see these videos because we dont have that type of ac`s in Germany
I'm German but I don't really know what our "big" commercial ACs look like. Care to explain what the differences are?
@@sven33r Ich kenne nur die aus den Supermärkten die hängen oftmals außen an der wand und nicht auf dem dach weil wir bei uns kaum Dächer haben wie die Amis. Außerdem werden die bei uns regelmäßig inspiziert, es kann also fast nie so schlimm kommen wie bei ihm in den Videos.
@@kingboller516 "regelmäßig" heißt eh am letzten Tag wo es noch erlaubt ist
@@plasmachicken ja aber das sind trotzdem gesetzliche vorgeschriebene Kontrollen. Die Dinger versiffen trotzdem nicht so krass bei uns wie in den USA
Is there a video of you replacing a unit and doing the best practices? Love your videos
I'd love to see that too
You made it work got it done and did a perfect job 👏 nice work my friend.
I was a bit surprised to see you put that hot dryer in the back where it was basically inaccessible. I though you would have done some pipe rerouting to get both of them out in front where they would be easy to replace later.
I would have but there was no room the cooling drier is already a half inch from the cfm....
Yet another great video, fully informative and educational, stay hydrated Chris and be safe buddy , you teach me alot by your videos
You got a great sponsor in Sporlan ... I wish T W Samuels would sponsor me ... Lol ... Great vid ...
Instead of using washers to line up the fan motor maybe use panel spacers. They use them when spacing fenders in cars C shaped so you don't have to remove the bolt and come in kit with bunch of thickness.
Good stuff Chris. Thanks for sharing.. stay safe have a great rest of the night
heat cramps, heat exhaustion, heat stroke. very serious conditions and you're right; it's easy to forget to check yourself. I was in the army for ten years, and they take it very seriously!
bro good for you, im from Australia so i had to convert fahrenhiet but damn 120 thats hard, respect to you man, solidered on!
Ah, just shy of 50 Celsius... No kidding, thats no joke to work in.
Nice video and important point in maintaining yourself in the conditions.
i only work at nigt when is to hot in the day time :) i have 3 friends that past away (all 3 heart attack, and 2 with children ) in the last 3 years at age 36, 38, and 42 and I am 35 ...
A: why isnt the cabling in ribbed conduit ? B : do you have a H&S safety keep in touch procedure ? We had a call centre that would monitor us in remote areas and contact us regularly for finish and travel home eta's . Kudo's for working in heat . You do need to learn first aid and understand Heat stroke . We have 45 c days here in our summer as well . Lunch can be just diced watermelon , grapes , peaches , kiwi fruit
I give u credit for putting 2 driers in. I usually remove the strainer and straight pipe it, replace the check valves, and throw a 163S filter drier in the location that's easiest to replace. Just if it ever needed to be changed in the future. That other drier is gonna be a bitch to remove if it ever gets clogged...
But good job!!!
It gets humid here in N. Carolina but damn!!!
115 in the shade...
AZ in the summer, being a commercial hvac repair who has to go on the roofs.. think you would have to bring a portable ac and a enclosed tent around the hvac equipment. Its dangerous work head stroke heat exhaustion. Hopefully its good money. AC in AZ in the summer time is as important as Heat in the arctic.
Noticed that we have a few of the same tools and equipment!!!! Which is awesome! It's like Seeing a player on your favorite team and having the same cleats. Lmao!!!
I watched everyone your video i work in IT find so cool love finding out how it all works
We had an old Bryant RTU similar this one at my school, just as dirty and rusty. It just sat there on the floor in the corner of the shop being used as a storage table.
Great video. I work In facility maintenance the only thing I would do different is put something on the feet of the tent to protect the roof. Maybe I couldn’t see something. Enjoy the videos keep up the great work.
Hey cris nice to see you came down to the valley, hopefully this was the last week of high temps stay cool bro!!!!
Yeah I'm going to be back out there tomorrow again, As I was finishing this ac repair they asked me to look at another unit...
If I had to do your job, in 115 heat, I would fall over dead! I think your videos are a great help to people who are new to the business. Especially how you instruct the viewers with out talking down to people or assuming they are stupid. No one likes that, and it really does not help people to learn what you are teaching. We have all had instructors who taught like that !
Great video as always bro. Head pressure was high but I guess load and ambient temp. Those check valves are a pain been there. I watch a bunch of your videos and You remind me of me love and it. I’ll be in touch
Looks like you are good boss,is very important to take breaks periodically cause in this job time goes fast.
Thank you for sharing. Tony Houston
I’ve got a pair of the Supco umbrellas. They’re a life saver over here in Florida.
😥😥 it was 57f here where I live in Ontario Canada, 3.5 hour drive away it was 97F
I already have a binnie and ordered a hoodie, now, if that shirt you are wearing you make it with a "V" shape collar then YOU GOT A SALE!!!!!!!!!!
Yeah I don't have v neck shirts .... the demand isn't there yet
@@HVACRVIDEOS : You know, with the high heat in summer it's a pain to wear that closed collar shirt.
Last winter it was single digits and I spent 30ish minutes outside then went straight in to put belts on a main blower (8' blower) while it was 145 in there. I felt bad for the rest of the day and my skin was dry. Wouldn't recommend doing that.
You could look into getting K-Flex Insulation to put in between the vibration of piping it comes in .5 or 1inch thickness. Sheets or rolls. Plus incase the wires in Sealtight if worried about the wires cutting. Just IMO. Those motors always have problems braket cracks and breaks or rubber grommets wear out. As a pass Bryant dealer it was one of my biggest complaints. Always have to be aware of the weather. Great video on the importance of to be sure you have the correct parts. Thank you.
Good Repair Video Chris
One thing that helped me with my welds, I use a 0 tip and then turn up the pressure on my regulators. It gives me a more controllable flame without torching more area than what I want.
At least that seems to work for me.
Wow that was a lot of work and R22 for that old unit! You guys did a good job to get it running again. I would have tucked the fan wiring back down under the grill. Good job guys! 👍
Canopies are definitely worth carrying up!
Those hot days take a toll on the attitude as well....well done!
P.S. you would make an awesome teacher or an instructor. You really do a great job. 😀👍
I used to skip meals to work too. Now I have diabetes without being obese. According to the doctor I trained my pancreas to NOT produce insulin.
Damn
I too have diabetes. What youll likely find is all your relatives have it too especially if they're Irish. I didnt get it till i was in my late 40s as did all my family. They call it onset set diabetes type 2.
22:49 - same thing applies when performing/working in costume, thick workwear, protective clothing, etc. for a good while, and then when it's time to get out, do it slowly, as not to shock your body with the cold.
ive used the stay silv rods to build support braces an welded to copper for support.
works pretty slick when you have to improvise.
The only thing you are missing from your hot day roof kit is the cooling mister kit for the ez up. Or one of the ones on a stand you put right next to you.
Your body acclimates. It's not a big deal. If he's in shade he's high on the hog anyways.
Great job Chris
Thanks bud
Excellent attention to detail!
Thank you for sharing your thought process and your wisdom with us. I love your videos so much, learning lots! thank you!
Nice job !
Pop up tent for the win 🙌🏽
Lmafo hahahaha I feel you bro .... Im in Phoenix its been 115 in the shade for 3 weeks straight on a roof surface temps are 135-140 in an attic its 160.. 120 is a cool day in Phx
I take it you guys just flat out don't do attic work in the summer?
160f is literally hot enough to cook the salmonella out of chicken.
So sending someone up into that without measures against the heat is basically a death sentence unless you only stay up there like 5 minutes at a time and then a half-hour break to cool off again.
NASA has a solution for that, before you put on a space suit you put on what's called a liquid cooling garment which is basically a spandex long sleeved shirt and spandex leggings with small tubes sewn in to it that circulate water that is run thru a block of ice (ice sublimation chiller) in the space suit backpack. Could do something similar for use in a hot attic, but you'd have to swap out the ice sublimation chiller for something that would work in earth's atmosphere, probably just a cooler full of ice water would work. That's too heavy for space but it would work perfect on the ground.
If that sounds too complex, you could make a suit that holds a bunch of those gel ice packs next to your skin (most importantly on your belly and your back, as that's where you would be able to keep your core temperature down) but you wouldn't be able to control your temperature as easily as with the liquid cooling garment where you could just control the speed of the water going thru the tubes to control how much cooling you get.
God, I don't know how you guys work in that heat. Around here 95ish is usually the most we get and that is bad enough. Yeah, I only saw a drier break down 1 time an Alco, filled the liquid line with pellets. Good job Chris!!
Typical summer in the great Inland Empire /Coachella Valley. Gosh I miss living there. Live in the southeast and what 120F there feels like its at 85-90 here.
The heat is no joke for sure. Ive gotten sick from it before 106 degrees high humidity, south carolina, out in a salvage yard. Even though I kept hydrated it had me sick for almost a week. I thought I can keep going.... yea then the vision goes blurry..... not good.
I can't believe these units don't burn through compressors in that crazy hot climate. 312psi head on an R22 system? Holy crap!
i know right. here in Washington when i see head pressure at 220 i start sweating
wonder why i'm watching this on my day off work
Same
The only issue that I've seen with the desiccant breaking up into the system is green techs replacing a muffler (compressor discharge vapor) with a drier. I do prefer the Sporlan Catch-All driers but nothing will survive on the discharge line. Mistakes happen (great learning expense), glad they were at least thinking to replace the drier on a refrigeration repair. 👍
It should be against the law to get that hot.🥵
Good for you and your crew getting it done.
Thumbs up form Claremont
Look at all those protective plastic sheaths in the punch-outs! What a manufacturer!
You've got to try Heat Shrinks, looks better then Black Tape.
I had one of those beads on the filter dryer to clog the Condenser and it also blew the valves on the compressor It took some work to get the jammed beads cleared!!! Only once I seen that on 16Years in the trade!!!
Catch alls have always been the best. That unit is probably going to last another ten or more years after you get done with it.
I also bring 6 bananas & a utility fan to keep air blowing on me. It's a little more to bring, but well worth the effort.
Hey you gotta be in my neck of the woods.
We are always 120 or bitter here in Bullhead, Mohave County.
No one goes to Bullhead unless they're truckers, lot lizards, or hiding from the law. Luckily most your tweekers station themselves in Needles, CA