you deserve to get praise and likes because not everyone will share knowledge and most of the shops I've asked to do it charge very expensive wages, it looks like it's easy to install by yourself huhu
Great video. Good production quality. Everything can be clearly seen. Thank you !!! I was going to bring this to my mechanic, but now I am going to tackle this myself. Thanks for helping me keep my $$$$$ in my pocket !!
Thank you for posting this. I was able to complete the job in 10 minutes each side. I would recommend that everyone take off your wheel to do this as it'll give you more room and access.
Thanks brother. Noticed one or two in comments called the silver connector the ballast. For them, no that is not the ballast. That is the igniter. The ballast is located on the bottom of the assembly. The igniter attached to the ballast. Two different items with quite a difference in cost.
Hi Danny Myers, Yes your g37 headlights does have a 4500k color temp. And For the fog lights you can put whatever you want maybe L.E.D. Bulbs will look great for u
Great video. I was struggling from up above. Much better way. I don't like doing shit like this by feel. Thanks. If I moved the position of the light it will synch up with each other when I start the car back up correct? I'm getting the fog lights too while I'm in there. Thanks buddy.
Blacktemplar420 the g35's and g37's are equip with 43-4500k and yes the one I installed was factory. Here at the dealer we install only factory parts for warranty.
I have a 2013 g37 and recently had some condensation within the headlight mount which then blew out the factory bulb. have you ever experienced this ? .... would you suggest just replacing the bulb and keep it moving ?
Yes I've seen condensation within these lights. My answer to u is that on some of the infinities they are built with a ventilation systems to help with change of weather. Now you can do two things ur car is a 2013, so depending on ur mileage and if you've been in an accident before with ur car u can take it into the dealer. If it's moisture cause from factory defects they will replace if it's moisture cause from a broken housing your on ur own. The other thing is u got to be sure it's the bulb and not the ballast/ actuator I would check both. To save yourself money I would remove my opposite bulb from the other working headlight and try first to make sure it's indeed the bulb. Hope this helps let me know if u have any problems.
Good tutorial, the trouble is these oem bulbs last longer than the ballast and perhaps the igniter! If your light "burns out" it could very well not be the bulb itself. Wondering how to change out the igniter.
Hello Joseph santos. Yes the ballast can be replaced on these models. You do not have to change the headlight assy. But you do have to remove the bumper to get to the ballast. I'll try to do a video on replacing the ballast very soon, working at the dealer I haven't really gotten a lot of ballast going bad tho, did you check the bulb thoroughly to make sure it's really inop
I just replaced the ballast on mine 2007 G35x sedan. Light was completely dead, now it works, but still flickers once in a while. Also the light is more of a crystal white now, compared to stock which is more yellow. Wondering if i need to change the igniter. BTW passenger side yes you need to remove the bumber, drivers side i dont think so.
Would a Nissan dealer be able to do most repairs on infiniti cars? My nearest infiniti dealer is over an hour away but the Nissan dealer is much closer.
I attempted to replace my bulb last night (drivers side), however the new bulb did not turn on either. It may be worth noting, despite being sealed off well there is a considerable amount of condensation inside the headlight housing. I have been told that the hid bulbs are sensitive to condensation, so I am wondering if this may be the case.
+jamie Seltzer It probably is the actuator that is located under the housing. The condensation are common on G35 but not g37 that's y there's a recall to change the headlights.on G35
+jamie Seltzer It probably is the actuator that is located under the housing. The condensation are common on G35 but not g37 that's y there's a recall to change the headlights.on G35
Great video. I have an '11 EX 35 with Halogens and looking to do an HID upgrade with relays & ballasts. Tried accessing the bulbs from the top & no way that was going to happen. The key is not breaking the fender liner clips or just having spares around if needed. Thanx!
Thanks a lot. It's super easy to access from the fender liner but doing a hid upgrade you will need to do more than that. You will also need to remove the bumper also but yes be careful of ur clips don't break them. They are actually cheap but to drive to the auto part for that is a waste of ur time. But good luck on ur mission.
Hey Conroy i was just curious as to if those were factory bulbs you used for the replacement? If so what is the kelvins on them? 8000k? The reason i ask is because i have a 2011 G37S coupe and the lights on mine dont seem to be as blueish. They are more like a crisp pure white. I want them to have a slightly more blueish tint so what would you recommend or do you have any bulbs to recommend to achieve that effect?
@ DJ REDLINE, I have the same dilemma. Purchased a new factory HID replacement and the new bulb is def not the same color (yellow) output as the originals (blue) but the dealer verified that is the correct bulb? Am I missing something here???
Which bulb types do you recommend for this kind HID change? I'm just looking for normal; "stock" replacement. I see Phillips and GE on rock auto. One is $55 the other $45. Does it matter? Thanks.
It kinda does matter as far as color temperature but but once it's factory stock for ur car it's fine. Sometimes people change one and then the color is different
I have a 2008 g37s coupe and my ballast failed. Apparently the ballast can't just be replaced on this models so I have to replace the whole headlight assembly. I want to replace it myself can u do a step by step on how to do that coz I believe the bumper has to come off too. Thanks!
Gotta remove the bumper to replace the ballast. If ur skilled enough with the right tools you can get it by just removing the washer tank from fender well.
@@DJREDLINE305 thank you so much bro. Your video was the best one out there for this. You saved me alot of money. It's so expensive owning a high end SUV LOL
2012 M37X- How can i brighten my headlights? Also I have the standard fog light if I put a 60w led bulb do I need to install a ballast or is it just a plug and play?
Depending on the size wheel you have. it may not be easy accessible. Do you have the 20 inch wheels? And yes you can change it to the 10,000k xenon bulbs
+DJ REDLINE ima just remove the tire.. i can access it by turning the wheel, but to make it more simple ill remove the tire.. thanks forbthe great video
Unfortunately those lights are aftermarket.so they are probably connected to the park lamp circuit. If those went out you probably have to replace the whole thing. If ur headlights are working ur ballasts are fine.
James Cornelsen G35's stops at 2008 and G37's starts at 2009 but the thing is they are similar. So to replace your balasts you have to remove the bumper because its underneath the headlight assembly.
+DJ REDLINE Thank you very much! ive been looking everywhere for this information. both fuses were blown. replaced them and they are working again. thanks again for the help
Robert Carrillo hey man thanks for watching. So in that case I think you have the ballasts or harness that are shorted to ground causing the fuses to be blown. I’d check the wire harness first to make sure no open wires are there. And if not replace the ballasts or headlight assembly. Note: Make sure they are not aftermarket headlamps that are installed on your car. As those tend to do that sometimes...
Hey bro, I own a 2011 Infiniti m37s And there is a knocking sound coming from the passenger side front wheel at low speed ova uneven surfaces, Any ideas??
@@DJREDLINE305 Haha done that and still having the same issue. I paid the stealership I mean dealership $142.00 only for them tell me the car is running just fine.. question: you from NY?, Thanks for your response.
Horace Mckellop No I’m from Miami. Sorry I misread the year of you’re car. It’s the older M’s that have the stabilizers issues. I’ve seen where the control arm on you’re car have a lot of excessive play when driving or braking hard or even sometimes on uneven surfaces. Drive the car for like 5-10 mph and just keep hitting the break as hard as you can and let go and have someone on the outside look at the front wheels to see if they move back and forth.
Thanks for the advice! Bought oem bulb from auto zone ($99). And replaced now. Tutorial was spot on. Took like 20 mins cause I didn't have someone to hold the flash light.
I have a G37 coupe. I have to replace the ballast, can I get to the ballast without removing the bumper if I have a coupe? Or is the ballast in the same spot on the coupe headlights even tho they’re shaped different
first of all thanks for the quick reply ! , im trying to change my turning lights and fog lights, so im trying to figure out the easiest/fastest way to do it without removing my bumper
So you have a swivel headlight. Commonly you might have had that problem before. Or it’ just got bad. The swivel motor in this case is inop. And the headlamp would need to be replaced. Changing the bulb would not do anything to the swivel actuator.
Not really sure how hard it is to replace the ballast on that particular model since they don't go bad. But in assuming it's not hard at all cause it can be seen by the headlight when u open the hood. Unlike the newer m 45 and m37s u have to take the bumper out
I have a 2010 g37. Is that ballast going out common? My low and high beams just stopped working on the left today. I noticed after I drove through a big puddle and it's been raining much. Could I have damaged the ballast or should I just replace the bulb first, in your opinion.
+henry vanegas you definitely could damage both. I would first check fuses, then bulbs then ballast. Just remove ur right side xenon bulb and put it in the left and see if it works. Before going to the auto part to spend money
I attempted to do this today and it was a major fail! I couldn’t even get the cover off to get to the light. Ducking broke a couple clips too smh. I realize nobody shows how to change the front parking light?
@0:09 that blue wire. It came out and I didnt notice till 2 days later after it had rained. Now the light wont work. Do you think the condensation caused this? If so can I just replace the bulb?
Mojo Jojo honestly if that blue wire came out it’s definitely a possibility that condensation is a factor. However 90% of the time condensation in the headlight will caused the ballast to go, because it’s at the bottom of the headlight. So I’m assuming you need the ballast. But to be on the safe side and to be sure check the headlight fuse and swap the other bulb from the other headlight and you’ll definitely narrow it down that way. Hope this answer you’re question my friend. Lmk...
Di Trillest Xxx the brake fluid reservoir is located right below the windshield on the driver side of the engine bay depending on your year it probably will or will not have a plastic cover in the compartment
Di Trillest Xxx If the fluid is very dirty I recommend you do a flush so you would actually bleed the brake to get rid of that old fluid. But if it's clean and just low just too it off to the "MAX" level don't overfill.
Hello, very informative video !. My car was hit by a truck tire in the highway, and I broke my fog lamp bezel. I found the part but Im not sure if is possible to replace it following the instruction in your video. Please let me know if you have done that type of job before. This is the part number I am trying to replace 622571NX0B. Thanks in advance
you deserve to get praise and likes because not everyone will share knowledge and most of the shops I've asked to do it charge very expensive wages, it looks like it's easy to install by yourself huhu
I appreciate that! Teach a man to fish rather than giving him a fish
Great video. Good production quality. Everything can be clearly seen. Thank you !!! I was going to bring this to my mechanic, but now I am going to tackle this myself. Thanks for helping me keep my $$$$$ in my pocket !!
Awesome 👏🏾
Thank you for posting this. I was able to complete the job in 10 minutes each side. I would recommend that everyone take off your wheel to do this as it'll give you more room and access.
Thanks brother. Noticed one or two in comments called the silver connector the ballast. For them, no that is not the ballast. That is the igniter. The ballast is located on the bottom of the assembly. The igniter attached to the ballast. Two different items with quite a difference in cost.
Thank you for sharing this helpful DIY HID Xenon headlight bulb replacement.💡
You’re welcome
Outstanding video. Really appreciate the help! Dealer wanted $670 for doing the same job 😡
No? To change a bulb? They probably were thinking they need to remove your entire bumper to replace the ballast as well.
I’m a whole woman and this video helped me tremendously.
Happy it did
The lights above the headlights can they be used? They only come on when I lock the door???
My lights aren’t bright enough
@@ALstarGAstar what’s the model you have ?
@@ALstarGAstar you probably need to get them polished or replaced
Hi Danny Myers, Yes your g37 headlights does have a 4500k color temp. And For the fog lights you can put whatever you want maybe L.E.D. Bulbs will look great for u
Great video. Thanks for that. I would not have known that to replace the bulb, you go from the wheel well. Very cool
THANKS very much! Got it out on the first try without lifting or removing the wheel.
Great job!
You're the real MVP. Salute .
Great video. I was struggling from up above. Much better way. I don't like doing shit like this by feel. Thanks. If I moved the position of the light it will synch up with each other when I start the car back up correct? I'm getting the fog lights too while I'm in there. Thanks buddy.
No problem my guy
To get to the fog lights u go to the lower engine cover. It's right in front of the wheel and pull the 10mm bolts u can get to it.
Took me about 12- 15 mins thank you 💯
Awesome man
Blacktemplar420 the g35's and g37's are equip with 43-4500k and yes the one I installed was factory. Here at the dealer we install only factory parts for warranty.
thanks for this video suddenly i can install myself ❤save my money
I have a 2013 g37 and recently had some condensation within the headlight mount which then blew out the factory bulb. have you ever experienced this ? ....
would you suggest just replacing the bulb and keep it moving ?
Yes I've seen condensation within these lights. My answer to u is that on some of the infinities they are built with a ventilation systems to help with change of weather. Now you can do two things ur car is a 2013, so depending on ur mileage and if you've been in an accident before with ur car u can take it into the dealer. If it's moisture cause from factory defects they will replace if it's moisture cause from a broken housing your on ur own. The other thing is u got to be sure it's the bulb and not the ballast/ actuator I would check both. To save yourself money I would remove my opposite bulb from the other working headlight and try first to make sure it's indeed the bulb. Hope this helps let me know if u have any problems.
DJ REDLINE Smart man, thanks for the feedback !.... I'll first try the lightbulb switch & if it doesn't do the job, I'll follow up with the dealer.
Good tutorial, the trouble is these oem bulbs last longer than the ballast and perhaps the igniter! If your light "burns out" it could very well not be the bulb itself. Wondering how to change out the igniter.
I’d do them both if I have to change the ballasts
hello , I broke the silver piece that holds the pins in place , can I replace it or will I need to replace the whole unit ? 3:04
How would I switch out the ballast? Is it mandatory I remove the bumper or can I do it from the wheel well too?
Hello Joseph santos. Yes the ballast can be replaced on these models. You do not have to change the headlight assy. But you do have to remove the bumper to get to the ballast. I'll try to do a video on replacing the ballast very soon, working at the dealer I haven't really gotten a lot of ballast going bad tho, did you check the bulb thoroughly to make sure it's really inop
I just replaced the ballast on mine 2007 G35x sedan. Light was completely dead, now it works, but still flickers once in a while. Also the light is more of a crystal white now, compared to stock which is more yellow. Wondering if i need to change the igniter. BTW passenger side yes you need to remove the bumber, drivers side i dont think so.
Would a Nissan dealer be able to do most repairs on infiniti cars? My nearest infiniti dealer is over an hour away but the Nissan dealer is much closer.
Same here! My local Nissan does but they don't do recall stuff.
@@jjwalker2011 Thanks for the reply. I was definitely worried about that lol.
what do i do when the light bulb is stuck to the harnest
I attempted to replace my bulb last night (drivers side), however the new bulb did not turn on either. It may be worth noting, despite being sealed off well there is a considerable amount of condensation inside the headlight housing. I have been told that the hid bulbs are sensitive to condensation, so I am wondering if this may be the case.
+jamie Seltzer It probably is the actuator that is located under the housing. The condensation are common on G35 but not g37 that's y there's a recall to change the headlights.on G35
+jamie Seltzer It probably is the actuator that is located under the housing. The condensation are common on G35 but not g37 that's y there's a recall to change the headlights.on G35
it ended up being the ballast.
+Jamie Seltzer yea just like I said actuator (ballast)
Great video. I have an '11 EX 35 with Halogens and looking to do an HID upgrade with relays & ballasts. Tried accessing the bulbs from the top & no way that was going to happen. The key is not breaking the fender liner clips or just having spares around if needed. Thanx!
Thanks a lot. It's super easy to access from the fender liner but doing a hid upgrade you will need to do more than that. You will also need to remove the bumper also but yes be careful of ur clips don't break them. They are actually cheap but to drive to the auto part for that is a waste of ur time. But good luck on ur mission.
Hey Conroy i was just curious as to if those were factory bulbs you used for the replacement? If so what is the kelvins on them? 8000k? The reason i ask is because i have a 2011 G37S coupe and the lights on mine dont seem to be as blueish. They are more like a crisp pure white. I want them to have a slightly more blueish tint so what would you recommend or do you have any bulbs to recommend to achieve that effect?
@ DJ REDLINE, I have the same dilemma. Purchased a new factory HID replacement and the new bulb is def not the same color (yellow) output as the originals (blue) but the dealer verified that is the correct bulb? Am I missing something here???
Great step-by-step video! I'll try to replace my HID bulbs tonight. Thanks!!! 😀
Stephen Chong. no problem hope it works for you.
Does he ballast only go back on one way? Mine seems to only want to go back on upside down and I can't get the seal to properly fit back on
Yes the ballast only goes back one way. But it’s easier to R/I the headlamp Assy and install the ballast
Thanks! From Moscow)
Thanks! Worked perfect for me!
Nice, so you didn't remove the bumper?
Which bulb types do you recommend for this kind HID change? I'm just looking for normal; "stock" replacement. I see Phillips and GE on rock auto. One is $55 the other $45. Does it matter?
Thanks.
It kinda does matter as far as color temperature but but once it's factory stock for ur car it's fine. Sometimes people change one and then the color is different
Hey Conway I have a 2013 g37 sedan. Do they have 4500k also? And what bulbs, besides HID, would you recommend for the fog lights? Thanks bro
I have a 2008 g37s coupe and my ballast failed. Apparently the ballast can't just be replaced on this models so I have to replace the whole headlight assembly. I want to replace it myself can u do a step by step on how to do that coz I believe the bumper has to come off too. Thanks!
Thank you for showing this. I got it! 👍👍
How do you replace the ballast on the M35 can I go in thru fender as well
Gotta remove the bumper to replace the ballast. If ur skilled enough with the right tools you can get it by just removing the washer tank from fender well.
Thank you! It’s the driver side!
i hope you can help me out on this. i did everything accordingly but my lights didn't come on. what do you think the issue is? the HID is good.
Hmm
That's gonna be ur ballast
Thanks for such a good how to video bro. I have a quick question? Is this the same method for my JX35 2013 INFINITI? Thanks for your help.
matthew Scott it’s the same for you’re Jx
@@DJREDLINE305 thank you so much bro. Your video was the best one out there for this. You saved me alot of money. It's so expensive owning a high end SUV LOL
matthew Scott no problem bro anytime, owning an Infiniti isn’t cheap trust me I know.
Thank you so much best video on RUclips
Can you get to the fog lights the same way?
2012 M37X- How can i brighten my headlights? Also I have the standard fog light if I put a 60w led bulb do I need to install a ballast or is it just a plug and play?
Clean the outside of the headlight housings. Install HIDs or LEDs. No you don't need ballasts for the 60W LED bulbs.
Do you need to disconnect the battery before doing this ?
No you don’t
Thanks bruh!!! Subscribed and liked
Thanks for the sub!
Same process for fx35 04? I'm trying to change my blown bulb. Or is there a way to upgrade to a LED
Danny Ruiz yes same process to change. I've never put an led bulb in the headlights cause there just not bright enough.
for a 2013 m37x.. can i turn the wheel to get to my bulbs? or would i have to take off the bumper? could i use 10k bi-xenon bulbs for replacement?
Depending on the size wheel you have. it may not be easy accessible. Do you have the 20 inch wheels? And yes you can change it to the 10,000k xenon bulbs
+DJ REDLINE ima just remove the tire.. i can access it by turning the wheel, but to make it more simple ill remove the tire.. thanks forbthe great video
+mac01t your welcome
i got a 08 g37s coupe are the led bulbs around the light a few went out is the my ballaster or they separate lights
Unfortunately those lights are aftermarket.so they are probably connected to the park lamp circuit. If those went out you probably have to replace the whole thing. If ur headlights are working ur ballasts are fine.
Thanks yeah my headlights work im guess the whole headlights must be aftermarket i just got the car last month thanks.
+Adrian Williams.No problem ur welcome
You are awesome. Thank you. Subscribed.
Hello thanks for the video and how can I find the lights on Amazon what is the name of the lights?
DMEX D2S - 35W - 6000K Cool White Xenon Headlight HID Bulbs 85122 66240 66040 66240CBI Replacement - Pack of 2 www.amazon.com/dp/B07F6Y3QYF/ref=cm_sw_r_cp_api_i_CCV2PHABJFCC6JCK9XDC?_encoding=UTF8&psc=1
Choose the color temp of your choice
Thank you
I have an 08 G37. How much of the back cover for the headlight . Do I need to remove to change the balast?
James Cornelsen G35's stops at 2008 and G37's starts at 2009 but the thing is they are similar. So to replace your balasts you have to remove the bumper because its underneath the headlight assembly.
I own 2008 g37 have the same problem balast went out
I just got a g37x coupe the dealer ship is charging me 300$ plus tax with installation their crazy 😂 I’ll do it my self thank you for the vid
Gil Carmona you’re welcome
excellent! thank you sir!
+chevyriderkc the fuses are located in the ipdm fuse box located at the right side of the battery.
+DJ REDLINE Thank you very much! ive been looking everywhere for this information. both fuses were blown. replaced them and they are working again. thanks again for the help
if anybody is wondering bulb size is DS2 cheap on ebay like 10 to 15 bucks for both
Quick question y doesnt one of my headlight turn on.. and its not the fuse..
Can be ur bulb or ur ballast
I have a 08 g37 both low/high beam don’t work, just the fog lights, I’ve replaced the fuse but they keep getting blowed! Why is that?
Robert Carrillo hey man thanks for watching. So in that case I think you have the ballasts or harness that are shorted to ground causing the fuses to be blown. I’d check the wire harness first to make sure no open wires are there. And if not replace the ballasts or headlight assembly.
Note: Make sure they are not aftermarket headlamps that are installed on your car. As those tend to do that sometimes...
Nice video. I neeb some info from you involving a 2011 g25x
Thanks bro life saver
Ok great I'm glad it worked for you
Hey bro, I own a 2011 Infiniti m37s And there is a knocking sound coming from the passenger side front wheel at low speed ova uneven surfaces, Any ideas??
Horace Mckellop possible cause is stabilizer links
@@DJREDLINE305 Haha done that and still having the same issue. I paid the stealership I mean dealership $142.00 only for them tell me the car is running just fine.. question: you from NY?, Thanks for your response.
Horace Mckellop No I’m from Miami. Sorry I misread the year of you’re car. It’s the older M’s that have the stabilizers issues. I’ve seen where the control arm on you’re car have a lot of excessive play when driving or braking hard or even sometimes on uneven surfaces. Drive the car for like 5-10 mph and just keep hitting the break as hard as you can and let go and have someone on the outside look at the front wheels to see if they move back and forth.
I would replace the bulb first in this case as it is less expensive. But I know for sure the bulbs always goes first.
Thanks for the advice! Bought oem bulb from auto zone ($99). And replaced now. Tutorial was spot on. Took like 20 mins cause I didn't have someone to hold the flash light.
What happens if the bulb doesn’t turn on?
Thank you for this video
If it's not the hid it's gonna be the ballast, otherwise know as the actuator you gotta take the bumper off and get the headlight out to remove.
I have a infinite m35 2006 to install will be the same way is that correct?
Yes same way.
I have a G37 coupe. I have to replace the ballast, can I get to the ballast without removing the bumper if I have a coupe? Or is the ballast in the same spot on the coupe headlights even tho they’re shaped different
You will have to remove the bumper unfortunately
@@DJREDLINE305 bummer. Thank you sir!
@@paolo7237 you’re welcome
Do I have to lift the car to do this?
You don’t have to. Just jack up the front wheel of the bulb you wanna change
Can you access the turning lights like that also ?
You can access it from the engine bay kinda tight but that's the easiest way.
first of all thanks for the quick reply ! , im trying to change my turning lights and fog lights, so im trying to figure out the easiest/fastest way to do it without removing my bumper
+Geo L ok turn signals are really easy, no need to remove bumper
yeah i did them yesterday thanks ! , my hand slightly fit thru enough to change them ! my fogs are next thanks !
Brah, this is cool of you to show people for free how to do what they would pay you to do.
Vince Fernandez. well I know how it is when you wanna DIY because the funds ain't there so I thought I should help out.
Good Job!!
I did this and my driver's side dynamic headlight stopped turning when I turn. Help please
So you have a swivel headlight. Commonly you might have had that problem before. Or it’ just got bad. The swivel motor in this case is inop. And the headlamp would need to be replaced. Changing the bulb would not do anything to the swivel actuator.
What about the fog lights, how do I replace them?
You access them underneath the bumper towards the front. Three 10mm bolts. Pull down the plastic and twist out the bulbs. Hope that works for you.
Thank-you I'll try that!
No problem just helping out
Why is you’re connector blue mines black
Some are blue and some are black
Not really sure how hard it is to replace the ballast on that particular model since they don't go bad. But in assuming it's not hard at all cause it can be seen by the headlight when u open the hood. Unlike the newer m 45 and m37s u have to take the bumper out
It's either gonna be the bulb or the ballast
I have a 2010 g37. Is that ballast going out common? My low and high beams just stopped working on the left today. I noticed after I drove through a big puddle and it's been raining much. Could I have damaged the ballast or should I just replace the bulb first, in your opinion.
+henry vanegas you definitely could damage both. I would first check fuses, then bulbs then ballast. Just remove ur right side xenon bulb and put it in the left and see if it works. Before going to the auto part to spend money
do i need to install another ballast? or this car has built in ballast?
Abangnya Gerry Girianza didn't get the problem your having? If I get more info then I can give you the best solution.
oh sorry i have 2008 accord asian version with d2r bulb, so i guess it has factory ballast?
Abangnya Gerry Girianza probably does or maybe it could be aftermarket you need to check that out.
perfect.
i have a 2008 g35 and water got into both front head lights. is it better to replace the head lights as a whole or change out the ballast and wires.
Hi Virginia I would suggest changing both headlights because if water went into the previous light it's going to go in there again
I attempted to do this today and it was a major fail! I couldn’t even get the cover off to get to the light. Ducking broke a couple clips too smh. I realize nobody shows how to change the front parking light?
Tyrell Drydgen you can change the parking light the the same way or from above
maybe most infinities but not a 2002 q45
@0:09 that blue wire. It came out and I didnt notice till 2 days later after it had rained. Now the light wont work. Do you think the condensation caused this? If so can I just replace the bulb?
Mojo Jojo honestly if that blue wire came out it’s definitely a possibility that condensation is a factor. However 90% of the time condensation in the headlight will caused the ballast to go, because it’s at the bottom of the headlight. So I’m assuming you need the ballast. But to be on the safe side and to be sure check the headlight fuse and swap the other bulb from the other headlight and you’ll definitely narrow it down that way. Hope this answer you’re question my friend. Lmk...
Damn plastic nib snapped off when I tried to reattach the retaining spring...unbelievable.
No worries once the bulb is firmly in you should be good
This is criminal wth these car manufacturers why do you have to do all this work just to change a bulb take of the wheel seriously sheesh...
Believe me I say the same thing
Nice ... Bro how do I check my brake fluid? @djredline
Di Trillest Xxx the brake fluid reservoir is located right below the windshield on the driver side of the engine bay depending on your year it probably will or will not have a plastic cover in the compartment
DJ REDLINE Copy... so I jus open it up n refill? R I have to drain the old one out?
Di Trillest Xxx If the fluid is very dirty I recommend you do a flush so you would actually bleed the brake to get rid of that old fluid. But if it's clean and just low just too it off to the "MAX" level don't overfill.
DJ REDLINE ahh respect general much respect
Di Trillest Xxx yes man
Starts at 2:00
Hopefully it work on my M37 😓
Hello, very informative video !. My car was hit by a truck tire in the highway, and I broke my fog lamp bezel. I found the part but Im not sure if is possible to replace it following the instruction in your video. Please let me know if you have done that type of job before. This is the part number I am trying to replace 622571NX0B. Thanks in advance
The fog lamp is completed replacesable. But you need to go from the bottom of the fender liner to replace it.
Bad camera work bro
jamaican
Yes sir straight
Haha, same man.
Alright sah big up you self