Insightful Illustrated Explanation in a Non-Technical Simple Mode. Sir , Plz may I know, which is the ideal position to position Knob of Thermostat , is it towards '+' clockwise direction or in middle.
The thermostat has the markings + • and ••. It is best to set it between + and • because in that position the water heats up to a high enough temperature, and it does NOT heat up to too high a temperature, which prevents the risk of someone being seriously burned by hot water.
Nice vedeo. Very very informative vedeo. Pls make such type of videos on every day uses home appliances repair. You are also requested that pls make on lcd repairing vedeo with full and detailed explanation on working and trouble shooting. You always give knowledgeable and informative vedeo. Than you so much, God bless you. God give you every thing whatever you want in your life. Thank u so much.
Dear sir thank you very much you teach us all things 😘😘😘we canot repay your favours on students like me but I make invocation ever you live long and blessed healthy 👍👍👍
🙋🙋🙋🥰🥰👏👏 Bună seara! Felicitări! Sunt român și nu știam să fac testul de continuitate a unui termostat. Am învățat Cum să fac testul de continuitate a unui termostat datorita dumneavoastră. Nubștiam că trebuie făcută puncte de legătură între cele două capete ce intră în rezistență și cu sondele puse pe conexiunile de alimentare Fază și Nul! Vă mulțumesc din inimă că am învățat ceva pentru cultura mea generală sănătate și numai bine! 🙋🙏🙏🙏👏👏👏
Very good video! I have quick question. Do you know the temperature settings in degrees Celsius on the dial? It has a - to + curve (from left to right) and the a single dot and a double dot. Do you know what they mean? And the temperature at each level?
working temperature minimum 20 degree to 90 degree celsius and maximum safety temperature 120 degree st starting of the curve it must be 20 degree and it must disconnect when the temperature reaches at 90 degree (that will end of the curve)
My geyser no cutting off even kept at lowest setting. A new thermostat also same problem. I tested outside similar to you by multi meter and heating the rod outside, both old and new thermostat working well and cutting off once heated. What could be the problem. I feel rod itself not getting the exact heat from the water. When I touch the rod immediately after removing from hot geyser, it feels warm but not as hot as the water.
Sir gyser pani thodasa garam karta hai uske bad auto cut hota hai fir se chalu karde to pani jyada garma gota nhi normal pani garam hota hai kya problem ho sakti hai aise probllm mein thermostat kharab hai ya auto cut switch?
Taank you sir. One question: what is the hysteresis/control accuracy for such thermostat? Can such thermostat maintain the temperature range within 1 degree of accuracy. Say if I want temp between 59 to 60 only, can it turn on at 59 and cut off at 60 ?
best regards dear these are analog thermostat which give estimated temperature control. because these use gas filled tube to activate electrical contacts. so no accuracy can be confirmed, as it is subjected gas expansion in the tue, gas quantity and thermal conductivity of the tube body if you want temperature accuracy to maintain at a specific temperature. so you must use electronic thermostat or digital thermostat (as Geyserwise products i.e. Geyserwise Max Geyserwise TSE) or other related brands
I enjoyed ur teaching bt I have an issue I changed my geezer thermostat and since my heater started shocking i connected d red wire on L and black on N bt if I test d power with a tester screw driver light will show on d black wire none on d red wire pls wat do I do ?
heater is short circuit internally you have to replace it because the heating element is concealed in the metal part , but after passage of time the outer metal gets damaged due to water contamination and oxides so water enters in the heating element so it provides electrical shock please replace it
This is brilliant!!! Just bought a geyser and the knob had come off and lost its setting. Perfect video for this thanks!!!
it is my pleasure
best regards
Amazingly useful content
Excellent sharing
Big Like from London 🇬🇧
thanks a lot Qaisar bhai
Thank you so much, calibration thing was new for me
Walekum Assalam bhai bahut acchi information Dete Hain aap Mashallah
Very well explained, and your English speaking is superb Brother.
Salamo alaycom from Lebanon.
Thanks and welcome
Nice sharing 👍
Desde Venezuela, te envío un enorme abrazo. Excelente video, gracias
Excellent thanks for sharing thermostat repair technique
thanks a lot
bets regards
Awesome video dear friend, greetings!
Mashallah very nice information 👌
Beautiful video great sharing
Very good and useful information sir thanks for sharing this knowledge to us
Most welcome
Thanks for your information ❤
Great informative video shared, like always, keep it up brother.
Walikum Salaam Bhai Sahib Good Work Liked it # 20
Many many thanks
Good explanatory video
best regards
very well explained 💯💯
thanks a lot
Very nice sir
Walkum aslam mashaAllah excellent video bhai
Thanks, your video helped me a lot!
Glad to hear that!
Insightful Illustrated Explanation in a Non-Technical Simple Mode.
Sir , Plz may I know, which is the ideal position to position Knob of Thermostat , is it towards '+' clockwise direction or in middle.
The thermostat has the markings + • and ••. It is best to set it between + and • because in that position the water heats up to a high enough temperature, and it does NOT heat up to too high a temperature, which prevents the risk of someone being seriously burned by hot water.
Nice vedeo. Very very informative vedeo. Pls make such type of videos on every day uses home appliances repair. You are also requested that pls make on lcd repairing vedeo with full and detailed explanation on working and trouble shooting. You always give knowledgeable and informative vedeo. Than you so much, God bless you. God give you every thing whatever you want in your life. Thank u so much.
special thanks and best regards
sure i am planning to do a complete course on LED / LCD circuit
Good brother..
Sir Thanks for sharing your valuable knowledge
Thanks and welcome
good work
best regards
Excellent presentation...
best regards
thank you so much
You're welcome!
Very nice video
Very nice video 👍👍👍👍👍🌹
Hi sir..., so many thanks for this video 🙏
Most welcome
Good 👍
Nice video
ND informative video
Lk 14 brother ❤❤❤
Many many thanks
good explanation
Thanks and welcome
Great job 👍 thanks
best regards dear brother
Dear sir thank you very much you teach us all things 😘😘😘we canot repay your favours on students like me but I make invocation ever you live long and blessed healthy 👍👍👍
best regards and special thanks
your OPAMP video will ready 10-15 days
i noted it and will prepare as soon as soon i get some free time
Good video thanks for sharing
A. O. A sir kya haal hai allah apko khush rkhy
Thanks for details, if auto not on/off how its fixed?
🙏Grazie 👍
best regards
Nice
Thanks
Nice Video.
In Instant Geyser, Thermostat setting is there to Cut-off at 55°c. (Factory set)
Need guidance to set Cut-off at 45-46°c
Very good informative. Please make a video of microwave oven.and all components checking methods.
will do it very very soon. i will try my best to share it in next week positively
@@HaseebElectronics many many thanks sir ji.
U mean to increase the temperature rotate the knob to anti-clockwise direction???
Thanks alot
best regards
Thanks for your share. Could you please explain how to reset this thermostat if it's tripped out? Seems no reset button.
it resets automatically. i never experienced in resetting thermostat
To get 30 degrees temperature for my water do I move the red dial to the “+l signs direction or towards the “-“ sign?
🙋🙋🙋🥰🥰👏👏 Bună seara! Felicitări! Sunt român și nu știam să fac testul de continuitate a unui termostat. Am învățat Cum să fac testul de continuitate a unui termostat datorita dumneavoastră. Nubștiam că trebuie făcută puncte de legătură între cele două capete ce intră în rezistență și cu sondele puse pe conexiunile de alimentare Fază și Nul! Vă mulțumesc din inimă că am învățat ceva pentru cultura mea generală sănătate și numai bine! 🙋🙏🙏🙏👏👏👏
61 like very nice
Very good video! I have quick question. Do you know the temperature settings in degrees Celsius on the dial? It has a - to + curve (from left to right) and the a single dot and a double dot. Do you know what they mean? And the temperature at each level?
working temperature minimum 20 degree to 90 degree celsius
and maximum safety temperature 120 degree
st starting of the curve it must be 20 degree
and it must disconnect when the temperature reaches at 90 degree (that will end of the curve)
@@HaseebElectronics thank you for your quick reply. Appreciate it! 😊😊
1200 watts is also available inarket...?
My geyser no cutting off even kept at lowest setting. A new thermostat also same problem. I tested outside similar to you by multi meter and heating the rod outside, both old and new thermostat working well and cutting off once heated. What could be the problem. I feel rod itself not getting the exact heat from the water. When I touch the rod immediately after removing from hot geyser, it feels warm but not as hot as the water.
👍👋
many many thanks dear friend
Brother kiya termostate k baigair chala sakte hai
no.
it will cause to create steam and it may cause to blast the gyser
Sir gyser pani thodasa garam karta hai uske bad auto cut hota hai fir se chalu karde to pani jyada garma gota nhi normal pani garam hota hai kya problem ho sakti hai aise probllm mein thermostat kharab hai ya auto cut switch?
A.o.A
I need a SMPS for charging 24V Battery
I am in Karachi
If you have only need 5~10A max
Thank you for your very good training videos
👌👌👌👍
Mashala zabrdast ap Mary man chinl pa aya karen os sa ltr nhe aty na is liya 🤔 thnks
Setting of Thermostat to cut off at lower temperature is possible ?
Taank you sir. One question:
what is the hysteresis/control accuracy for such thermostat? Can such thermostat maintain the temperature range within 1 degree of accuracy. Say if I want temp between 59 to 60 only, can it turn on at 59 and cut off at 60 ?
best regards
dear
these are analog thermostat which give estimated temperature control. because these use gas filled tube to activate electrical contacts. so no accuracy can be confirmed, as it is subjected gas expansion in the tue, gas quantity and thermal conductivity of the tube body
if you want temperature accuracy to maintain at a specific temperature. so you must use electronic thermostat or digital thermostat (as Geyserwise products i.e. Geyserwise Max
Geyserwise TSE) or other related brands
What is the good temperature for nice hot water
I enjoyed ur teaching bt I have an issue I changed my geezer thermostat and since my heater started shocking i connected d red wire on L and black on N bt if I test d power with a tester screw driver light will show on d black wire none on d red wire pls wat do I do ?
heater is short circuit internally
you have to replace it
because the heating element is concealed in the metal part , but after passage of time the outer metal gets damaged due to water contamination and oxides so water enters in the heating element so it provides electrical shock
please replace it
Iska Urdu ya Hindi version hai??? Plz provide link
Hindi language mein video banaen please❤
Please check my urdu channel
Haseeb Electronics urdu
youtube.com/@haseebelectronicsurdu?si=S5QwEruoe5svMxit
Thank you so much, calibration thing was new for me