47:02 that is a stabilizer for the center of gravity of the speaker, like the go 2 uses too, that is used to equalize the weight equally on all the speaker s mass, to make it stay with no problems on his feet and position
They put the weight there so the speaker does not tip over as much when you stand it up the way it's supposed to be and probably stop the speaker from bouncing around too much they made it bottom-heavy for a purpose there not trying to make this speaker heavier if that was the case the extreme three would be heavier it was a good thought by JBL they're not cheating they're thinking
I also say it's a stabilizer, but I also think it makes the sides more rigid in case you drop it the sides won't collapse so it won't hurt anything that's inside. Did anybody notice the bass response went way down when he did not put that part back in. I believe because that part fits tite against the sides it adds to the bass response thus making it like sound a much bigger speaker. I've been playing with speakers since I got my first tape recorder back in 1972 when I was 10 years old. I only say that not to brag but to just to say I've listened to a lot of speakers over the years and to me this is the best sounding speaker for its size that I've ever heard. I was so impressed with mine I bought 2 more for my friends for Christmas presents and they love it.
They put the wait there for two reasons as far as I’m concerned. They put it there to help the bass sound a little more firm. I’m sure the low and sound would sound different by removing this piece of metal. Also to help prevent it to tip over.. I really don’t think JBL put it there for the reason you’re explaining.
Good video. But you should upgrade to more quality camera, for example with more fps to rise the quality(when some viewer pause to see something specific, to have a nice quality frame to look at) You also should add a some kind of conclusion at the end, what are your thoughts about the specific device that you disassemble and reassemble. The build quality and parts used by the manufacturer.
Yeah the weight is like a ballast stone so to speak. The Clip 3 has it in the flap that covers the aux in and charging port. If they are floating I guess, never tossed mine in a pool. Not that I think it would stop working, just never really needed to.
The metal block is used to balance the speaker center of gravity, to avoid speaker drift during loud music playback, jbl has calculated it, not a volume cheating trick.
I can't think of a reason that adding weight to a product would be a problem. The 'premium' feel has always been that heavier is better quality. If it's very low weight, we think of it as cheap.
Surprisingly, these actually look like real QR codes! You could probably scan them for specifications of parts. In a lot of electronics, they are actually data matrix codes. They look similar, but are not QR codes and cannot be read without specialized software. QR codes have squares on 3 corners, data matrix codes do not.
Here some answers why should it make some additional solid weight, to produce power sound that you make it feel the every beat of bass , to make it stable in position, because if it's make to produce a powerful sound or bass (according to size or physical appearance or structure) it must hold it the power, that's the secret of all good quality speaker the makes power sound, just try to listen to a powerful speaker and yet have a poor speaker box or light weight material to be a box,less power of punch and the sound is minimal and distorted and more on vibration that makes you annoyed you at the end.
@@shaktastik even if he did have a video to show you, there's a dozen more that will show you how to remove the dust cover quite fast. I'm at 10:50 and you still haven't taken it off. I will respectfully back out of watching the rest of this hour long cover removal video 🤣
on mode and push hold -vol & bluetooth button at the same time until item off. now your in LFM(low frequency mode) is activate. a.k.a bass booster mode👍👍👍
Do NOT do this. That is not a “Low Frequency Mode”. That is a “Debug Mode” which turns off all of the DSP limiters and introduces clipping sooner into the signal. If you would like your speaker to have a long, healthy life. Then just leave it in its default settings.
47:02 that is a stabilizer for the center of gravity of the speaker, like the go 2 uses too, that is used to equalize the weight equally on all the speaker s mass, to make it stay with no problems on his feet and position
They put the weight there so the speaker does not tip over as much when you stand it up the way it's supposed to be and probably stop the speaker from bouncing around too much they made it bottom-heavy for a purpose there not trying to make this speaker heavier if that was the case the extreme three would be heavier it was a good thought by JBL they're not cheating they're thinking
Yeah
I also say it's a stabilizer, but I also think it makes the sides more rigid in case you drop it the sides won't collapse so it won't hurt anything that's inside. Did anybody notice the bass response went way down when he did not put that part back in. I believe because that part fits tite against the sides it adds to the bass response thus making it like sound a much bigger speaker. I've been playing with speakers since I got my first tape recorder back in 1972 when I was 10 years old. I only say that not to brag but to just to say I've listened to a lot of speakers over the years and to me this is the best sounding speaker for its size that I've ever heard. I was so impressed with mine I bought 2 more for my friends for Christmas presents and they love it.
They put the wait there for two reasons as far as I’m concerned. They put it there to help the bass sound a little more firm. I’m sure the low and sound would sound different by removing this piece of metal. Also to help prevent it to tip over.. I really don’t think JBL put it there for the reason you’re explaining.
ND: No srews
CS: 2 screws on two Sides
DT: 6 screws on left , right Side and behind the gummy Grab
As a clarification, ND, CS, and DT refer to the two letters at the beginning of the serial number, printed on the back of the speaker on the rubber.
Good video. But you should upgrade to more quality camera, for example with more fps to rise the quality(when some viewer pause to see something specific, to have a nice quality frame to look at) You also should add a some kind of conclusion at the end, what are your thoughts about the specific device that you disassemble and reassemble. The build quality and parts used by the manufacturer.
For easy to understand, the devialet phantom for example it's weight itself, why it's heavy?? And making a implosive sound??
Yeah the weight is like a ballast stone so to speak. The Clip 3 has it in the flap that covers the aux in and charging port. If they are floating I guess, never tossed mine in a pool. Not that I think it would stop working, just never really needed to.
The metal block is used to balance the speaker center of gravity, to avoid speaker drift during loud music playback, jbl has calculated it, not a volume cheating trick.
Surly the extra Weight is to stop the speaker falling over.
Thanks for wideo❤
I can't think of a reason that adding weight to a product would be a problem. The 'premium' feel has always been that heavier is better quality. If it's very low weight, we think of it as cheap.
Vielleicht als gewicht zur Verbesserung der Standfestigkeit
is this original? I need to know the code of the integrated amplifier..
Try to think positively and don't keep making assumptions. Do research and don't spread defamation🤗
I love to turn the bass down on my phone so it lasts all day!
Only issue is the power button dosemt always work!
Please make teardown video of noise vibe 5w speaker.
man, it took me like 10 seconds to get the cover off, just put it under and lift up lol.
me too xd
Me three lol
Me four !!!
Even the Hama Pocket 2.0 includes such a weight.
what are the QR Codes that are inside the speaker?
They're qr codes 🤷♂️
I bet....they link a scanner to information 🤦🏻
Maybe leads to web page that says information about the component
Surprisingly, these actually look like real QR codes! You could probably scan them for specifications of parts.
In a lot of electronics, they are actually data matrix codes. They look similar, but are not QR codes and cannot be read without specialized software. QR codes have squares on 3 corners, data matrix codes do not.
Here some answers why should it make some additional solid weight, to produce power sound that you make it feel the every beat of bass , to make it stable in position, because if it's make to produce a powerful sound or bass (according to size or physical appearance or structure) it must hold it the power, that's the secret of all good quality speaker the makes power sound, just try to listen to a powerful speaker and yet have a poor speaker box or light weight material to be a box,less power of punch and the sound is minimal and distorted and more on vibration that makes you annoyed you at the end.
28:45 It isn't a micropnone its a hole so there's not too much pressure inside the speaker.
Obviously made to stay intact. Not designed, or expected to be taken apart.
its possible to put the grill back?
yes
What is that scale
That weight is to help it stay up
Hey My Kevinbaby😍😍🥰🥰
can i get bin jbl clip 4 instead of jbl go 3?
You will feel more bass in go3
Omg you did it the wrong way!! It's easier to take the grill off the speaker.
Im not sure what you mean, do you have a video to show me?
@@shaktastik even if he did have a video to show you, there's a dozen more that will show you how to remove the dust cover quite fast. I'm at 10:50 and you still haven't taken it off. I will respectfully back out of watching the rest of this hour long cover removal video 🤣
Your smartphone look so nice
It's a audio player
Abrir uma JBL é fácil difícil é ver vc fazer do jeito errado da até agonia.
acho que ele fez do jeito mais cuidadoso, nao vi ele quebrar nada, você tem um video de alguem abrindo de um jeito mais correto??
@@thetechnoking procura aí no RUclips ai q vc vai achar
En vano despegó la goma trasera .
The metal is PLATE 😊 ONLY VALUE IS THE PLATE
is that original jbl go3?
Yes I only review Original goods 👍🏼
@@shaktastik thank you sir! Keep it up nice review👍
My broken 2 months speaker jbl go 3 inside something is flying haha
on mode and push hold -vol & bluetooth button at the same time until item off. now your in LFM(low frequency mode) is activate. a.k.a bass booster mode👍👍👍
Really?
Do NOT do this. That is not a “Low Frequency Mode”. That is a “Debug Mode” which turns off all of the DSP limiters and introduces clipping sooner into the signal. If you would like your speaker to have a long, healthy life. Then just leave it in its default settings.
7:50 2024 July 24
niiice
เหล็กชิ้นนั้นเขามีไว้เพื่อถ่วงน้ำหนักเวลาตั้งตอนเปิดเพลงจะได้ไม่ล้มไง
Wow
Bruh what is that phone
Sony portable audio player
You are a big... lol
This is pathetic, what a waste of time
Jbl go 3 fake😊