Refreshingly honest hard-working Americans! You guys have a great eye for these modern rides. Also giving credit where credit is due to others! Really enjoy watching you guys! Went back and watched a couple older videos… spooning a tire on in front of a tire machine 🤣 love it! “Tinkering with Trent” freakin riot! Read a few older comments of yours and I have to agree! Your honest real time hard work is the way to go gives us home builders inspiration knowing the struggle is real! Thanks for not editing the hard stuff/mishaps out! Can’t say enough great things about y’all!!! Thanks!
The Fat Bob is looking awesome Trent. I prefer the look of the fb over st. Your bike gonna be unique and stand out in the crowd. My favorite build so far this year, good job.
Wow those saddle bags even replicate the delightfully asymmetrical sizing that Harley came up with for the Sport Glide. You know, because even though everybody loves to complain about the lopsided look, since the motor company did it, that is the way everybody else should do it. Ryan, make sure Trent stays with the low exhaust with the big gap under the right bag, because that is the way. For the record, the Fat Bob fender is the best fender Harley has ever made.
we love ya dan. thank you for the sacrifices you've made to keep us entertained and to share your story with us. we'll always have your back and we can't wait to see the hero car 💪🏼
The vlog of you guys going out to Texas on a road trip gonna be rad been waiting for that you guys put in so much work and never get the time to take these out on the open road !! “Hell ya brother “!!
So the actual AdvanBlack ST fairing is cut larger (trim ring removed) than the oem st fairing and made to fit the Baja LP6 and Shark Demon which means no cutting the fairing for the recessed look. The Harley factory OEM St fairing needs to be cut if you want it to be recessed. Advan Black also tells you that you still need to purchase the aftermarket A10 Moto (formerly Cali Raised) or Amazon Knockoff LP6 recessed bracket seperately. The Advan Black ST bracket is not made for the LP6 or Shark Demon. Like Ryan said, read the instructions, actually the website 😂. You guys are fabricators so no problem and it looks great. Keep up the great content guys!!!
Trent if for whatever reason you decide you can't live with the look of that fender with the bags I'll even stevens swap you with the fender and struts from my street bob. Bikes looking great so far man
I'm glad you're coming across the fall backs of some of these products. I'm holding my tongue on somethings, until you encounter it for yourselves. The headlight fitment for the Advanblack streetbob fairing also takes some re-imagining. I avoid buying Chinese, period.
Trent, if you really want touring bags, you all should look into the Nasty Hogs rebel chopped quick detach bags. The same mounting as the ST bags but not the clamshell style. they open from the top and in my opinion look way better than the ST bags.
If you’re gonna run a 2-1 exhaust anyways try to get a right hand saddlebag from the sport glide. Those are both the full size bags. The lowrider st had the smaller right because it wouldn’t clear the exhaust
Looks good Trent, like Thomas said follows the plate. You guys did a great job on my st. Those bags are going to shake like crazy, I put a kibble white cross bracket , stabilizes both sides.
I know they’re the pumpkin spice latte of the motorcycle world but leatherpros are the only bags that’ll look good with the fatbob fender. Also Ryan’s buffalo Bill voice is on point 😂
You can always run an edward ritchie sissy bar that he can custom make to mount inside or out of the fender struts. It adds like a quarter inch. Non removable but looks bad ass
Looks great. Motorcycles use to stick out of a crowd of cars as motorcycles lights were on vs cars. As more cars adopted DRL’s motorcycles headlights do not stick out as much. I prefer yellow running lights as more visible out of sea of white DRL’s just saying.
Every time i see that street glide in the background without bags and sitting up like it is, i want to sell my Dyna and build one. But as with most things, i lack the funds.
6” risers www.kruesioriginals.com/products/archetype-signature-adjustable-riser?_pos=1&_sid=3dc3eb534&_ss=r HANDLE BARSwww.kruesioriginals.com/products/odi-v-twin-moto-handlebar?_pos=1&_sid=5c5abdcfb&_ss=r And you will need a 2 inch pullback plate
No definitely not a fan of the fat Bob fender tail. You're so good but I definitely would take that chintzy plastic / license plate holder off and remount that license plate on the side. Or somewhere else or somewhere better... Kool bike 🤟
I don't know if I got the right install kit.... So I grinded and cut up a bunch of shit and now it's EXTREMELY TIGHT... So we'll see. LMFAO I'm too high for this.
I’m confused as hell,,,,,, you buy a fat bob then turn it into a wanta-be ST, bags and all, even going to change the tires. So the thought comes to mind & I have to ask, so, yea, why didn’t you just buy an ST & you would have saved a bunch of time?, your bike, you do you, I’m just asking
I thought I heard them explaining that the geometry of the fat Bob frame is different; position of the seat is closer to the tank and height of the seat are different on a Fat Bob and is tailored for a shorter rider..?
To get this deep into a build thinking you're gonna push another new popular lame bike and then realize it's been discontinued is hilarious. Trent already wants to sell it
@ ive got a road glide and my brother has the low rider ST. Ive put abt 1000 miles on it. The bags are just flimsy junk with crappy gaskets that fall off.
Now I know Kruesi is carrying HD because I hated the Fatbob but I mean seeing Trent fuck with it……I could dabble I could dabble boys🔥🔥🫡 Also commenting until I get Trent’s hair conditioner routine
Love the direction you're taking this bike 👌
You and me both!
Agreed. The fat bob is underrated. If they didn’t give it a bum ass tank and gave it the 117 it would’ve been the top seller, imo.
Your videos are not just entertainment, they are a source of inspiration and wisdom. Thank you for your creativity and effort!🏈😘🌔
Looking back Trent, nothing will be as classic as that FJB ignition cover 🔥 turns out they lit him up... And he'$ toast.... Make stunts great again
Refreshingly honest hard-working Americans! You guys have a great eye for these modern rides. Also giving credit where credit is due to others! Really enjoy watching you guys! Went back and watched a couple older videos… spooning a tire on in front of a tire machine 🤣 love it! “Tinkering with Trent” freakin riot! Read a few older comments of yours and I have to agree! Your honest real time hard work is the way to go gives us home builders inspiration knowing the struggle is real! Thanks for not editing the hard stuff/mishaps out! Can’t say enough great things about y’all!!! Thanks!
Thank you very much, we appreciate the support.
“Maybe we should talk to Tommy more” 🤣 Tommy, keep up the good work buddy!
The Fat Bob is looking awesome Trent. I prefer the look of the fb over st. Your bike gonna be unique and stand out in the crowd. My favorite build so far this year, good job.
Thank you very much, we love this model of motorcycle. It’s going to be pretty awesome.
Wow those saddle bags even replicate the delightfully asymmetrical sizing that Harley came up with for the Sport Glide. You know, because even though everybody loves to complain about the lopsided look, since the motor company did it, that is the way everybody else should do it. Ryan, make sure Trent stays with the low exhaust with the big gap under the right bag, because that is the way. For the record, the Fat Bob fender is the best fender Harley has ever made.
This was a fuckin hilarious episode! The fact that you guys didnt know the bike was discontinued was gold 😂😂
😂😂 we had no idea
Tinkering with Trent is the shit
we love ya dan. thank you for the sacrifices you've made to keep us entertained and to share your story with us. we'll always have your back and we can't wait to see the hero car 💪🏼
The vlog of you guys going out to Texas on a road trip gonna be rad been waiting for that you guys put in so much work and never get the time to take these out on the open road !! “Hell ya brother “!!
Who are you kidding that bike will be really cool looking I bet there’s not another like it. Great job guys love the videos keep them coming
Watching Trent work on this bike is exactly how everything goes when I go to work or install something on mine 😂
It's always a little more complicated than you think it's going to be.
Every fucking time lol.
I like the goofy ass rear fender with the bags, gives it a unique rocket bike look 🚀
Bruuuhhhh!! The comedy is just right 🤣😂🤣
So the actual AdvanBlack ST fairing is cut larger (trim ring removed) than the oem st fairing and made to fit the Baja LP6 and Shark Demon which means no cutting the fairing for the recessed look. The Harley factory OEM St fairing needs to be cut if you want it to be recessed. Advan Black also tells you that you still need to purchase the aftermarket A10 Moto (formerly Cali Raised) or Amazon Knockoff LP6 recessed bracket seperately. The Advan Black ST bracket is not made for the LP6 or Shark Demon. Like Ryan said, read the instructions, actually the website 😂. You guys are fabricators so no problem and it looks great. Keep up the great content guys!!!
It sure would be awesome if y’all would produce the saddle bag bracket!!
For your dime bags for the Fat Bob!!
Trent if for whatever reason you decide you can't live with the look of that fender with the bags I'll even stevens swap you with the fender and struts from my street bob. Bikes looking great so far man
Just ordered my stunt tail shirt!!! Hope it comes with my new stunt tail 🤘 love your channel you have me wanting to get a nightster with your build
The bags look great!! Don't overthink it! Tough look!
I'm glad you're coming across the fall backs of some of these products. I'm holding my tongue on somethings, until you encounter it for yourselves. The headlight fitment for the Advanblack streetbob fairing also takes some re-imagining. I avoid buying Chinese, period.
Trent, if you really want touring bags, you all should look into the Nasty Hogs rebel chopped quick detach bags. The same mounting as the ST bags but not the clamshell style. they open from the top and in my opinion look way better than the ST bags.
They do look way better because they ripped them off completely from our touring saddlebags.🖕🏼
Fully customized light bracket! LOL! The reality that is how it goes with all of us.
Haha awesome, I am doing the opposite but same thing to mine.. I started with an ST and swapped out a fatbob tail section to help my short ass!
If you’re gonna run a 2-1 exhaust anyways try to get a right hand saddlebag from the sport glide. Those are both the full size bags. The lowrider st had the smaller right because it wouldn’t clear the exhaust
Looks good Trent, like Thomas said follows the plate. You guys did a great job on my st. Those bags are going to shake like crazy, I put a kibble white cross bracket , stabilizes both sides.
Thank you, glad you like it. I built brackets for the side a little extra tight should hold it pretty good hopefully
Sharpie makes silver markers that work awesome on darker color paints. Just a heads up.
I know they’re the pumpkin spice latte of the motorcycle world but leatherpros are the only bags that’ll look good with the fatbob fender. Also Ryan’s buffalo Bill voice is on point 😂
Hey I’m making my Softail into a mini touring too lol. Was debating getting this or a batwing failing like the street glide
The gimble dying makes me think about the blasting couch episode when the camera was all over the place
Yahll should bring back the blasting couch
That’s some vintage stuff right there
Also, the actual spacing of the rails is different from the st to the fat bob, so that is probably why it was a bit of a hassle to mock up at first.
Shame they didn't make right hand pannier same size as left. There's gotta be a market for one, supprised no one has done it yet.
Batman gone 1% on this Fatbob,she looks awesome
You can always run an edward ritchie sissy bar that he can custom make to mount inside or out of the fender struts. It adds like a quarter inch. Non removable but looks bad ass
Looks great. Motorcycles use to stick out of a crowd of cars as motorcycles lights were on vs cars. As more cars adopted DRL’s motorcycles headlights do not stick out as much. I prefer yellow running lights as more visible out of sea of white DRL’s just saying.
Very nice
I've learned that you should never say "This should be easy!"
Every time i see that street glide in the background without bags and sitting up like it is, i want to sell my Dyna and build one. But as with most things, i lack the funds.
Make more money
Like the look from the back
Okay - what would it take to get one of those M8 derby covers in anodized purple?
Keep up the awesome content!
We only make them for the 2018 and under Softail
www.kruesioriginals.com/products/kruesi-originals-derby-covers?_pos=1&_sid=5dce51a83&_ss=r
What mid controls did you guys install? I want those on my LRS! Are they stock ergonomics?
Looks great from the back, all tire like a dragster ... With boxes for the s*** you want on the road 🛣️
Lets get Trent on Tren!
They sell the shark demon bracket for the st fairing
Lol
Which one is better st fairing or fxrt fairing
ST all day
@ why st?
Can I use Vance n Hines fuel pac 3 to control my rev limiter to build a stunt bike
Need make this bracket and put on website.
silly question why are the bags different sizes
The most unorganized Harley RUclips channel but the funnest to watch 😂
They should put a sport glide tank on it so you can get more range
Correct me if I’m wrong, but that rear tire is on in the wrong direction.
You guys still gonna run different wheels?
Definitely
😂😊lol love these videos. Ryan need help with my 24 street glide need bars I’m short dude 5’7” lol
6” risers
www.kruesioriginals.com/products/archetype-signature-adjustable-riser?_pos=1&_sid=3dc3eb534&_ss=r
HANDLE BARSwww.kruesioriginals.com/products/odi-v-twin-moto-handlebar?_pos=1&_sid=5c5abdcfb&_ss=r
And you will need a 2 inch pullback plate
I just can’t get on board with the asymmetrical bags! Just looks like the bike had a stroke to me. I get it it’s not my bike
I need that derby cover for my 2021 M8 softail please
Brandon is soon to be a Non Issue. U.S.A is on the comeback track, and I am positioned to capitalize on it.
Kuryaken collab please!?
🤙
Nooooo, call the diewerkz or dieworks guys. They make symmetrical st bags that are a little bigger.
Use the Viking bags they are not as long
No definitely not a fan of the fat Bob fender tail. You're so good but I definitely would take that chintzy plastic / license plate holder off and remount that license plate on the side. Or somewhere else or somewhere better... Kool bike 🤟
I don't know if I got the right install kit.... So I grinded and cut up a bunch of shit and now it's EXTREMELY TIGHT... So we'll see.
LMFAO I'm too high for this.
❤🤙
Hard
The bracket is probably for an lp4
It’s for an LP six they are more shallow than the shark demon so it would fit one of those perfectly
@ makes sense 👍🏻
I hate the two sized bags drives me crazy.
😅 That's one custom custom custom fatbob 🐓
I’m confused as hell,,,,,, you buy a fat bob then turn it into a wanta-be ST, bags and all, even going to change the tires. So the thought comes to mind & I have to ask, so, yea, why didn’t you just buy an ST & you would have saved a bunch of time?, your bike, you do you, I’m just asking
You’re an idiot
Seriously
I thought I heard them explaining that the geometry of the fat Bob frame is different; position of the seat is closer to the tank and height of the seat are different on a Fat Bob and is tailored for a shorter rider..?
Yeah what he said when he bought it was he liked the feel of the fatbob and got that bike a lot cheaper than you could get an ST
St prices still high, popularity issue😂. Seating is a little better for trent. If you go back to the start of the series, it is explained
Whos becca
To get this deep into a build thinking you're gonna push another new popular lame bike and then realize it's been discontinued is hilarious. Trent already wants to sell it
Yes, that is hilarious, definitely not the reason we bought the bike. The fat Bob is the best set up softail there is.
@kruesioriginals I didn't ask
whis becca? lol
I cant stand the different size ST bags .
The factory bags arent even good ST bags lol. Thats shit is trash.
Why would you say that? What do you have?
@ ive got a road glide and my brother has the low rider ST. Ive put abt 1000 miles on it. The bags are just flimsy junk with crappy gaskets that fall off.
Now I know Kruesi is carrying HD because I hated the Fatbob but I mean seeing Trent fuck with it……I could dabble I could dabble boys🔥🔥🫡
Also commenting until I get Trent’s hair conditioner routine
This is the third fatBob that we’ve built on our RUclips, you should check out the others. They’re pretty sick.