How To Install Carbon Miata Sequential Led Turn Signals On The NA

Поделиться
HTML-код
  • Опубликовано: 2 ноя 2024

Комментарии • 44

  • @ardscorner
    @ardscorner 2 года назад +4

    We're normally traditionalists....myself and Roy.....I said to Roy fitting LED lights to a car would make it look all ponsie....what did I say Roy.....make it look all ponsie. But then Carbore bought a pair with intergalatic delivery times and fitted them. I said to Roy....those LED lights he fitted have really surprised me with how good they look....what did I say Roy....she said they made her wetter than an over ripe melon.....I did not say that Roy you lying piece of s..t

    • @CarBore
      @CarBore  2 года назад

      😂😂😂 "I hope YOU crash" poor Roy not having Renee these days. I normally would agree with Renee as well I love the "OG look" when it comes to most things, I've yet to find a set of lights for the rear that look better than the standards, I won't change them either until something comes along that is an improvement on them or looks "right" but I wouldn't know anything about that sort of thing sir.

    • @ardscorner
      @ardscorner 2 года назад +1

      @@CarBore .....well Ted....the lights in the lower field need changing...maybe we could go and take a look if you are not too busy...

  • @chrisb8840
    @chrisb8840 2 года назад +3

    Love them mate they make Scarlet look younger and they tie in well with the headlamps 👌

    • @CarBore
      @CarBore  2 года назад

      Thanks Chris you’re spot on they do just set off the front of the car I think. 😁

  • @jacobfoster6773
    @jacobfoster6773 2 года назад +4

    Wow these really do look good and suit the halo eyes well.
    Assuming my project goes through it's MOT (barn find that hasn't run for 12 years!) I plan of treating it to a set of ilmotorsport low pros and a set of jass performance stealth led turn signal intakes, although they're bloody expensive for just a bit of mesh and led light bars, might go the DIY route instead.

    • @CarBore
      @CarBore  2 года назад +1

      I know the ones you mean I looked at them but just couldn’t justify the price for what they ones were, that said these ones ain’t cheap either 😂 if your looking at the diy route I think you can some 3D printed variants of them as well seen a few which look pretty nice on the forums…….
      Best of luck with the MOT 🤞😁

  • @callmejohn585
    @callmejohn585 2 года назад +1

    I'm usually a classic look kinda guy but honestly they look super

    • @CarBore
      @CarBore  2 года назад

      Hey! Thanks John glad you like them 😁

  • @Valhalla764
    @Valhalla764 2 года назад +2

    Looks great good job . I know I’m going to break your heart saying this but along from where I stay there’s a MX5 convertible with the roof down been parked up for about 10 years just abandoned such a shame to see it I look at it every time I drive past it it’s on a bit of waste land I will get some photos and send them to you 👍😎

    • @CarBore
      @CarBore  2 года назад +1

      No! That can’t be true 😱😢 that’ll be absolutely rotten if it’s been sat for years! Wonder if it’s the one I’ve seen a picture of before. Someone left on sitting on some grass land somewhere and it’s totally rotted. So sad to see that.

  • @frenchy1939
    @frenchy1939 Год назад +1

    i was looking for an instalation vide thanks!

    • @CarBore
      @CarBore  Год назад

      You’re welcome! Hope it helps with the install. They are easy enough I just make a meal of everything 😂

  • @davidevans3806
    @davidevans3806 2 года назад +1

    they look great

    • @CarBore
      @CarBore  2 года назад +1

      Thanks David 😁 glad you like!

  • @terminalconnection4641
    @terminalconnection4641 2 года назад +2

    I just checked out how much they were 🤯 nice but wow the price

    • @CarBore
      @CarBore  2 года назад +1

      Yeah they aren’t cheap 😂 we don’t talk about the price until we get to Christmas time lol

  • @gothicgman
    @gothicgman 2 года назад +1

    Love them look great 👍🚘

    • @CarBore
      @CarBore  2 года назад +1

      Thanks George glad you like em, I did have the thing in the back of my head saying hmmm it’s not very oem but I really love them now.

    • @gothicgman
      @gothicgman 2 года назад +1

      @@CarBore it’s what you like and after all it is your car 🚗 it makes you smile and that can only be a good thing do it your way 👍🚘

    • @CarBore
      @CarBore  2 года назад +1

      Very true, I might lose sight of that from time to time as odd as that might be to say 😂

  • @peterohs7079
    @peterohs7079 2 года назад +1

    Very nice I was going to buy from mx5parts but might get these instead.

    • @CarBore
      @CarBore  2 года назад +1

      Thanks Peter I do think they look way batter than the IL ones but I know it’s each to their own I just think they compliment the Halos better.

    • @peterohs7079
      @peterohs7079 2 года назад +1

      @@CarBore they do pal 👍

  • @carlieparong6357
    @carlieparong6357 6 месяцев назад +1

    did you have any problem with the lights being wobbly after screwing the 2 bolts in?

    • @CarBore
      @CarBore  6 месяцев назад

      Nah everything’s been fine, only issue I had was that one of the light failed, changed it and never had any issues since….. I feel like that’ll jinx it.

  • @Eduardo-fe9zx
    @Eduardo-fe9zx Год назад +1

    Quick question, i set these up and they were fine, but now the rings on my halo lights don’t light up but the hi-beam lights do, any suggestions/fixes?

    • @CarBore
      @CarBore  Год назад

      Sounds like there could be a short on the connection maybe? Is it both of them that are out? Could potentially be a fuse if that’s the case unusual for both of them to go.
      I’ve heard of one going but that was due to water ingress, never heard of both going. Are your TSIs still working? …… sorry to ask so many questions 😂 hate electrical faults always loads to rule out.

    • @Eduardo-fe9zx
      @Eduardo-fe9zx Год назад +1

      @@CarBore so uh, im a little dumb, im assuming its cause i just completely disconnected the halos and connected these 😂, i dont know how to wire but i’m gonna see what i can do😊

    • @CarBore
      @CarBore  Год назад

      That might be why they aren’t working right enough 😂 I did a video on changing over a faulty halo that includes how to wire them up. Might not be the greatest video in the world but does show kinda how to do it without having to solder etc.

  • @lorenzoorozco3416
    @lorenzoorozco3416 11 месяцев назад +1

    I set up the same way but only the turning signals light up when I put the hazards on.

    • @CarBore
      @CarBore  11 месяцев назад

      Hmm if the DRLs aren’t working I’d maybe check the connections first possibly an issue with the units if that’s all wired fine.

  • @slowboyz5791
    @slowboyz5791 Год назад +1

    Are those the clear one or the smoke one

  • @flappypaddleslyfe76
    @flappypaddleslyfe76 2 года назад +1

    Oooooo that's not very nice they don't suit the car get a set of OG lights back on it!!!! Jk they look awesome.

    • @CarBore
      @CarBore  2 года назад

      😂😂 lol Ty Flappy Paddles

  • @pawpatina
    @pawpatina Год назад +1

    there is no way you fit in a miata... unless the camera really does add 10 stone... lol

    • @CarBore
      @CarBore  Год назад +1

      Nah I added the 10 stone myself with years of dedication 😂

    • @pawpatina
      @pawpatina Год назад +1

      @@CarBore hahahh my best friend is your size and he HATES having to ride in my car... can see over the windshield...

    • @CarBore
      @CarBore  Год назад +1

      😂 that’s actually the only gripe I have any taller and I wouldn’t be able to see for the surround….. must admit I was shocked that I got myself when I went to view the car a few years ago. Couldn’t have been happier when I did!

    • @pawpatina
      @pawpatina Год назад

      @@CarBore Yea I have owned every car on my bucket list except super cars and I always come back to miata... putting an LS6 in one right now... couple more weeks and will be driving. check my vids. And have you changed the seat foam at all or aftermarket seat fixed it? my buddy is so big he likes it when the seat is out... haha

    • @CarBore
      @CarBore  Год назад +1

      Nah it's the standard seats in mine no padding removed or anything in mine. Only thing that I find is when driving for a long period my leg gets sore but I imagine thats just the the same for anyone when your chewing up the miles. When I get in from work I'll be all over it wanna see this build you've got going on 😂👍