I think that minifig looks perfect,but that wing while nice looking, I have two problems, there's these big light gray bricks, I mean that is not on the vulture's wings, at least not that color. Second, so the vultures wing are big, no doubt, but these are WAY too big, just look, he can't even reach the ground.
I think the vulture wings are actually quite good, I don't like that they used white for the main colour, but I also don't mind the helmet, a new mould would have been better, but it's ok.
I'm glad that they are keeping that Iron Man helmet for sets that are based off the movies! I thought I was going to be stuck with the new comic-book-style one forever! :D
Meh, I think his wings are fine. They're a little thick, but the size I think is alright. Only thing I don't like are all the grey Nexo Knights shields. EDIT: After watching the brand new trailer, I'd say the wings are actually too small.
I'm disappointed at the wings to. Even when you look at the compared Vultures, you thought they would put small, separate pieces for the wings, but they went too much into detail.
Ilike the use of the new helmet mold for vulture, if it were more accurate the price for the set would presumably scale to a more complex/unique mold, also plove these brick-built wings as opposed to a fixed mold a la comic book version vulture. Vultures wings are larger than Falcons wings so if they made a piece similar to falcon, I think it would be too risky, the modl may end up being too cumbersome and fragile considering the wings design and scale in relation to the minifig.
A Person Delta customs on instagram revealed info on the sets a few months ago (which were all accurate) and said that the shocker would be included in this set
A while ago, Marvel released concept art of Spiderman fighting Vulture and Lego tried to recreate it using the civil war Spidey, and they made a really quick Vulture with Brick-built wings that are different from this, so what I'm going to do if I get the Vulture set is I'm going to try to build the wings from the Lego concept art picture that they did and try both sets of wings on Vulture and see what I like better.
i do like the look of the wings for the vulture does look oversized and huge in the trailers only thing I'm not too thrilled with is not sure how I'm gonna display him with the rest of my Marvel Lego minifigs with that size of built wing.
I'm definitely picking both of these sets up. They look amazing and i see nothing wrong with them, not even Vulture. And i'm pretty sure that the new Iron Man suit is based on the armor from the Ultimate comics ;)
the fourth minifigure is Shocker, it's been known for a few months. I hate Vulture's helmet- he's meant to have a beak-like pointy helmet and now he's got a squashed flat Iron Man one.
Ok, fair, I see your opinion. I like the small set, since it is kind of decent, but why stress the BANK? Though, actually, Beware the Vulture, probably is the cooler one.
I'm going to get the Lego Spiderman Homecoming Beware The Vulture Set and the Lego Spiderman Homecoming ATM Heist Battle at once as my Christmas present.
Shocker isn't that big of a spoiler character wise, unless he is a big spoiler in the film, so as others have suggested, it is most likely the tinkerer-considering how he has yet to appear in any promo material. There were photos via the mattel(?) action figures showing an updated suit i.e the mk46 from civil war but repainted to look like iron man's suit from ultimate comics, there was also I believe a Hot toys figure photo showing the same new suit which was lablelled as the mk47. Considering how studios have previously edited film footage as to not give certain spoilers in the trailers(eg.Lego Batman Movie), its highly likely that in the film the shots we see of iron man in the trailers will be him in the updates suit in the final film-sorta how CG effects will change from trailer to trailer (some shots of iron man in the civil war trailers show this)
In the car were it opens there are two pieces on the side.If you add the two together it looks like the weapon which the hunter had in the bridge battel set from last year
in the part of the truck that opens why are the two halves of kravens staff on the pegs in the back. lego could have put the ol fire extinguisher in there but instead they put in two halves of kravens staff in the back. hmmm
no he's not. It's Vulture, Shocker, and a mysterious character. But thats probably least likely Kraven. It's more reasonable venom or carnage maybe even doc ock
Now that the trailer 2 for Spider-Man homecoming is out...I can see that the wings are in scale but should be in a darker color instead of using regular gray. And I had hopes they would make a new helmet piece. #budgetcuts
I love the wings but they are are a little too big. I would have made them brick built too but I would have made them smaller. It wouldn't be too hard with mixel joints :D
The fourth minifigure is the shocker, he was already confirmed to be in one of the sets, and since marvel hasn't released pictures of him yet it makes sense lego wouldn't either.
Have you noticed inside the truck on both sides,there are the 2 parts of kraven's rifle from last year bridge fight. He might just be the missing character.
Since Homecoming is set so soon after Civil War (Tony Stark's black eye from the fight has barely faded), I'm guessing that the Iron Man suit is a hastily repaired mark 46.
the wings are actually just massive in the movie too, the lego wings are not that bad
They are, but these are just too big.
holy crap you replied! and yeah I guess they are now that im getting a closer look at images, love your vids btw
I think the wings look fine, size wise
im just happy to get vulture
I think that minifig looks perfect,but that wing while nice looking, I have two problems, there's these big light gray bricks, I mean that is not on the vulture's wings, at least not that color. Second, so the vultures wing are big, no doubt, but these are WAY too big, just look, he can't even reach the ground.
The vulture looks badass. Those giant wings are so cool
it would be better if he could stand on his legs though, but the minifig very badass
I'm in love with the new improved spidey!
I think that the mystery figure is the shocker.
Like of you agree
I would like to see the 3rd set of spiderman homecoming alomg with hor ragnarok like what LEGO did to gotg vol.2
sorry i said along!
Barry jeffrey I think is doc oct but idc we all have opinions
If it's not I would be shocked
Hammy he's not in the movie
The missing figure is probably the Tinkerer or the Shoker
Florian Humer or star lord
Mzazz108 nah it's more likely to be Thor
Florian Humer nah Howard the duck
Florian Humer it's either gonna be culture without the suit, Peter Parker, aunt may,
Master Bricks Productions cause the cannons a playable feature
It looks like Vulture strapped some quinjet wings and jet engines onto his back.
Just call me Peter ^ This guy gets it.
Still, it's better than Groot.
I think the censored character is shocker, cause I'm pretty sure it was on the set description a few months ago.
I'll prolly take the vulture wings from the previous vulture in the ultimate spiderman set cuz his wings in this are ridiculous
JakTm Gamer yeah, shocker was also the only fig who wasn't revealed, even though he is officially going to be in the movie.
Please let there not be a Bruce Wayne/Loki or clone head under Vulture's mask please! I pray!
I hope they get a good representation of Michael Keaton, but it could just be angry clone lol
there probably is sorry to burst your bubble
I'm actually fine with them reusing the comics Vulture head, looks like Michael Keaton to me
Funnily enough, Michael Keaton _did_ play Bruce Wayne.
Gabriel Hill True true
I think the vulture wings are actually quite good, I don't like that they used white for the main colour, but I also don't mind the helmet, a new mould would have been better, but it's ok.
the_lego _arstist it's not white it's grey
It's not white is grey
I'm glad that they are keeping that Iron Man helmet for sets that are based off the movies! I thought I was going to be stuck with the new comic-book-style one forever! :D
Great I want to see the Thor ragnarok set
i'm wondering if they will make one because they didnt for the other movies but fingers crossed
JakTm Gamer they're making 2 ragnorak sets
JakTm Gamer
spoiler: the 4th minifig is the Tinkerer. he made the vultures wings
also, that "new" criminal torso was first used on Micheal Knight for Lego dimensions
Well it's still kind of new xD
wait, it isn't shocker? disappointing.
Bricknerd you don't know it's the tinkerer, that's the 4th minifig
It's the shocker. delta customs on instagram revealed details about the sets a few months ago and got everything correct
you should use yellow jacket's helmet for your custom vulture 👍
You know you're a boss when you can talk about two Lego sets for 12 minutes!
Meh, I think his wings are fine. They're a little thick, but the size I think is alright. Only thing I don't like are all the grey Nexo Knights shields.
EDIT: After watching the brand new trailer, I'd say the wings are actually too small.
It is obvious that this set is a direct reference in design to the classic Spider-man 2 set 4853 Spider-man's Street Chase!
Pretty sure it's shocker. I'm pretty hyped for that figure because I have the images that leaked and got taken down of shocker, and he looks sick.
*the movie version, not the minifigure
Thank You Man to bring to us the best video of "Sneak Peak"
8:05 that is the torso for Michael Knight from Knight Rider from Lego Dimensions
I expected something different for Vultures wings but I think the look cool
I'm disappointed at the wings to. Even when you look at the compared Vultures, you thought they would put small, separate pieces for the wings, but they went too much into detail.
this is a cool Spider-man homecoming sets can't wait
Also u do some of the best custom minifigs ever and deserve more subscribers
The wing span for vulture is actually on point. The wings from the movie look maybe even biggger
love how many videos you have done recently
Ilike the use of the new helmet mold for vulture, if it were more accurate the price for the set would presumably scale to a more complex/unique mold, also plove these brick-built wings as opposed to a fixed mold a la comic book version vulture.
Vultures wings are larger than Falcons wings so if they made a piece similar to falcon, I think it would be too risky, the modl may end up being too cumbersome and fragile considering the wings design and scale in relation to the minifig.
i agree the wings on vulture should definitely be a bit smaller, but as far as the mask goes i don't really have a problem with it
I want to see this on opening night. I probably can because this comes out over the summer.
will be unboxing it this upcoming week
They probably made the Vulture's wings that way to accommodate the action features and poseable joints.
I agree Vultures wings are the size of Tony Stark's Ego!🤣
the torso on the person in the captain America mask was used for Michael Knight in the knight rider set for Lego dimensions I believe
The covered figure is shocker
MattMovies but you don't *know* that,
YES WE DO!!!
A Person Delta customs on instagram revealed info on the sets a few months ago (which were all accurate) and said that the shocker would be included in this set
yes
according to Delta Customs' set description a few months ago, the mystery minifig should be Shocker
I hadn't even known we were getting these!
The figure is shocker it was leaked on Delta Customs on instagram from months ago. Just thought i would let you know.... Great Analyisis though...,
Quick Brix Gay
XL Drawings! No that was my old account lol and i gave it to a friend a couple of months ago
The torso on the guy with the captain america mask was used on nightrider from lego dimensions
to be honest, I love the wat the wings came out.
They are huge in the movie bro that concept is out of scale
A while ago, Marvel released concept art of Spiderman fighting Vulture and Lego tried to recreate it using the civil war Spidey, and they made a really quick Vulture with Brick-built wings that are different from this, so what I'm going to do if I get the Vulture set is I'm going to try to build the wings from the Lego concept art picture that they did and try both sets of wings on Vulture and see what I like better.
ZanyRyan Could you put a link to the concept art?
ZanyRyan The pic was fake. Look it up. It was by some reddit user.
champagnedaddy b Yeah i know i just wanted to see it but i have found it now
Sorry. I thought it was real. I'm still going to try to make those wings though
Can't wait for the new lego set to come out
The torso for one of the robbers is actually from the dimensions level pack with Knight Rider
I need one of these sets! (Beware the vulture obviously)
the body on the captain america robber is from the night rider lego dimensions :) (btw this is THE SEALNOON CUSTOMS from flickr)
The Spiderman homecoming trailers are awesome and in buying a lot of the set u know what im getting all of them in 1 day when they come out 😆😆😆
i do like the look of the wings for the vulture does look oversized and huge in the trailers only thing I'm not too thrilled with is not sure how I'm gonna display him with the rest of my Marvel Lego minifigs with that size of built wing.
I'm definitely picking both of these sets up. They look amazing and i see nothing wrong with them, not even Vulture.
And i'm pretty sure that the new Iron Man suit is based on the armor from the Ultimate comics ;)
NovaBlast Studios
Hey, I recognize you... :)
¯\_(ツ)_/¯ Most people usually do.
I can't wait till they come out
I'm doing a huge batman Gotham city and batcave so I will probably use the BANK for my Gotham city.
Howcome you don't say your signature "buy" at the end of your videos anymore?
the fourth minifigure is Shocker, it's been known for a few months. I hate Vulture's helmet- he's meant to have a beak-like pointy helmet and now he's got a squashed flat Iron Man one.
the torso for captain america (bank robber) is used for Michael Knight (lego dimetions)
Spider-man: MY GOD FINALLY!!!!!!!!!!!!!! THANK GOD!!!!!!!!! YES LEGO!! MY GOD THANK YOU
Mgf, if you're going to make a custom vulture, I think the yellow jacket helmet looks better than the one we got
vultures wings are actually fairly big, I don't like the use of those nexo knights shield pieces.
I like both but am only allowed to get one. Which one do you guys recommend?
I agree the secret figure is probably shocker!
BTW I love you videos
The wings are actually in scale. Yes, a bit too thick in the middle, but over all in scale.
Ok, fair, I see your opinion. I like the small set, since it is kind of decent, but why stress the BANK? Though, actually, Beware the Vulture, probably is the cooler one.
the bank set sould've came with the homemade suit
FINALLY Spidey gets his own lego sets for the first time based on the movie!!!
I think one of the robber's chest pieces is Knight Rider from LEGO Dimensions
I'm going to get the Lego Spiderman Homecoming Beware The Vulture Set and the Lego Spiderman Homecoming ATM Heist Battle at once as my Christmas present.
kinda surprising that Iron Man doesn't have the power blasts too. I actually love that new piece and it looks great in displays on Iron Man.
I actually really really like the vulture minifigure and its wings
old iron man is back!!!! YAY
Shocker isn't that big of a spoiler character wise, unless he is a big spoiler in the film, so as others have suggested, it is most likely the tinkerer-considering how he has yet to appear in any promo material.
There were photos via the mattel(?) action figures showing an updated suit i.e the mk46 from civil war but repainted to look like iron man's suit from ultimate comics, there was also I believe a Hot toys figure photo showing the same new suit which was lablelled as the mk47.
Considering how studios have previously edited film footage as to not give certain spoilers in the trailers(eg.Lego Batman Movie), its highly likely that in the film the shots we see of iron man in the trailers will be him in the updates suit in the final film-sorta how CG effects will change from trailer to trailer (some shots of iron man in the civil war trailers show this)
man im excited about the mystery miny fig and the iron man suit but tho i kind of hate it a bit the vulture tho just wow
In the car were it opens there are two pieces on the side.If you add the two together it looks like the weapon which the hunter had in the bridge battel set from last year
Hey Michael, would you be down to make some custom *IRON FIST* Minifigs for the release of it on Netflix
mgf u were right it is shocker. i just wanted the minifigures so i ordered them off bricklink.
The torso that the robber has is/was used in the Lego Dimensions Knight Rider set.
BANK!!!😂
so to become a avenger,are there like trails or a interview?😆
the clown prince of crime just don't do anything I would do and don't do anything you would do. There's this grey line and that's where you operate
😂 did Liz get a new top? no you've seen that before.never with that skirt.we should probably stop staring before it gets creepy though.yep.
the clown prince of crime TOO LATE!
You guys are losers
TOO BAD THAT THE ATM HEIST BATTLE SET DOES NOT INCLUDE THE IRONMAN & THOR IMPOSTORS JUST LIKE WHAT WE SAW IN THE TRAILER!
in the part of the truck that opens why are the two halves of kravens staff on the pegs in the back. lego could have put the ol fire extinguisher in there but instead they put in two halves of kravens staff in the back. hmmm
HOLY FUCK KRAVEN IS IN HOMECOMING
no he's not. It's Vulture, Shocker, and a mysterious character. But thats probably least likely Kraven. It's more reasonable venom or carnage maybe even doc ock
I want to know what you think
They should make a set with the costume for Spider-Man from the end of the trailer
The vulture wings are actually pretty accurate in size. It's just that there bulky
5:03 I like the wings, but I'm going to trade them out for the ones he had in the Doc Ock Tentacle Trap set.
Now that the trailer 2 for Spider-Man homecoming is out...I can see that the wings are in scale but should be in a darker color instead of using regular gray. And I had hopes they would make a new helmet piece. #budgetcuts
Great video keep up the good work
The wings are actually pretty big in the movie so I wouldn't use falcons wings when you make a custom
I love the wings but they are are a little too big. I would have made them brick built too but I would have made them smaller. It wouldn't be too hard with mixel joints :D
The Captain America criminal has Knight Rider's body.
IRON SPID3R Really? Cool,
IRON SPID3R YUP YOUR RIGHT MAN!
Now I wanna get the vulture set for Spider-Man and not the one from Civil War, but I want the new vision print of the new color of the infinity stone
they are so cool
The fourth minifigure is the shocker, he was already confirmed to be in one of the sets, and since marvel hasn't released pictures of him yet it makes sense lego wouldn't either.
Joshua Bryk There's actually concept art of the Shocker.
I was not expecting vultures wings to be so big😱
the wings are moveable so there really isnt a problem they have smaller versions of most of the pieces so they couldve used those
thank u for suuper good videos🙏🏻
Awesome!
this is awesome
spider-man homecoming sets are so RAD
I actually really like the wings.
I think the torso the Captain America bank robber is wearing is from the Knight Rider Dimensions minifig
That iron man suite has looked like that in photos for the figure and everything.
Have you noticed inside the truck on both sides,there are the 2 parts of kraven's rifle from last year bridge fight. He might just be the missing character.
the robber torso is the Knight Rider torso from the lego dimensions pack
Since Homecoming is set so soon after Civil War (Tony Stark's black eye from the fight has barely faded), I'm guessing that the Iron Man suit is a hastily repaired mark 46.
Jotham Smith good theory
vulture wings are lit, only problem is he'll just easily fall over
Please do the Thor, Justice League sets when they get revealed.
Vulture looks awsone