Diy projects Smart tool Hom made tools Life Hacks DIY projects How to make New and Awesome ideas Home made tools Tips and tricks Amazing home made invention lathe machine lathe workshop
Hopefully he had the earth of the welding machine at the other end of the rod he was welding on through the hollow tailstock. If not, the welding current passed through the lathe bearings. Not a good idea....
Wenn dies Probleme deiner Drehmaschine bereitet weil der Schlag aufs Lager zu groß ist, schmeiß den Hobel auf den Schrott. Nichts desto trotz, wenn einer auf meiner Weiler das schweißen anfängt ist er einen Kopf kürzer 😅
Selten so einen Schwachsinn gelesen. Auf einer Weiler oder VDF Boehringer oder jeden anderen ordentlichen deutschen Drehbank werden ganz andere unterbrochene Schnitte gedreht. Exzenterwellen, Flansch Bohrungen überdreht etc. Scheinbar haben Sie bisher noch an keiner vernünftigen Drehbank gestanden weil Ihnen bereits ein unterbrochener Schnitt bei einem Sechskant Sorgen bereitet.
Most amazing idea to damage a spindle bearing...
Hopefully he had the earth of the welding machine at the other end of the rod he was welding on through the hollow tailstock. If not, the welding current passed through the lathe bearings. Not a good idea....
😂😂😂😂 absolutely right
Another amazing idea: just buy a hex nut and don't waste a bunch of time
I am going to retire my almost new milling machine, now! 😮
Lol
Lol
Тем кто в токарный станок электродами тычет нужно руки отрывать сразу!
Так же как и тем, кто на таком вылете выкручивает болт сантиметров на 10 и долбит головкой по резцу.
Нахрена вообще эта конструкция.. можно было просто в патроне зажать через разрезную втулку из куска трубы
А как это безопасно.... Конечно безопасно, других то способов, более простых то нет....
Just cut it off a weld a nut on!
Một việc thừa, ở Viet Nam có câu thành ngữ " Thừa giấy vẽ voi", và vẽ rắn thêm chân " rất hợp, đúng là Ăn được bát cháo chạy ba quãng đồng..
Есть способ быстрее и проще
Should not weld on machine chuck
Tại sao không chế cho bàn xe dao và lắp mũi phay vào mâm tiện.
Ý tưởng là có thật.
Nhưng nó không phù hợp cho sản xuất
Очень нужный и полезный канал. Спасибо автору канала за его видео. Я лично уже применял на практике и все получилось. Продолжай в таком же духе
Endmill cutter in chuck ..mount tool post angle plate use chessing dial as deviding head ,..well this idea is also not bad..little bit jerk to spindle
Шпиндельным подшипникам пизец приходит, из-за прохда тока по ним. 😢
Ну если он массу на станину цеплял, то да
Complete guess work as to where the next flat is to be machined.
This is madness.
شكرا جزيلا لحضرتك
Apne acha dimag lagaya
What is it?
By a mill
Damm this channel is a gold mine for good ideas
Нафиг себе жизнь усложнять с таким успехом можно просто шляпку в патроне зажимать и получается тоже самое
Mất thời gian tôi dùng một chiếc máy mài với một nửa thời gian tôi đã làm xong
When u tooling like this it's make vibration
сварка на станине станка... +500 к мастерству
சூப்பர் 👏 எங்க டர்னர் (tarner) போலவே வாழ்த்துக்கள் 👏👍
Зачем так далеко болт выдвигать? Чтоб сильнее удар был?
Wenn dies Probleme deiner Drehmaschine bereitet weil der Schlag aufs Lager zu groß ist, schmeiß den Hobel auf den Schrott. Nichts desto trotz, wenn einer auf meiner Weiler das schweißen anfängt ist er einen Kopf kürzer 😅
Если вы так будете работать то вы вскорее выбросите станок на свалку. Можно было просто зажать в патрон
Selten so einen Schwachsinn gelesen. Auf einer Weiler oder VDF Boehringer oder jeden anderen ordentlichen deutschen Drehbank werden ganz andere unterbrochene Schnitte gedreht. Exzenterwellen, Flansch Bohrungen überdreht etc. Scheinbar haben Sie bisher noch an keiner vernünftigen Drehbank gestanden weil Ihnen bereits ein unterbrochener Schnitt bei einem Sechskant Sorgen bereitet.
Exelente idea 👏
No se para qué, es eso.
Бля вот ни как не подумал бы что этот экземпляр идею подкинет, я тут как раз на подобии думал над приспособой
This man has proved that lathe is the mother of all machines.
Number one if you're a real Machinist you never never never never never ever weld on a part in your lathe.
تسلم ايدك
А на ху...... я купил фрезерный?
Фрезерный это долго,токарный быстрее.Сам владелец обоих.
@@ruhisky682
Точность изготовления, таким методом, оставляет желать лучшего.
У меня у самого 2 токарных и фрезерный,
Мля... варить в патроне -- пипец коренным подшипникам.