This was a fun stone to cut! Let me know in the comments below any suggestions for video content like more or less of the cutting process, types of stones you would like to see cut, etc.. I'm open to suggestions as I build my channel and try to keep the content interesting for you!
Yo Matt! Thanks for putting up a couple of decent videos on faceting! I’m new to faceting myself. Picked up an UltraTec V2 in the early days of Covid and finally got around to setting it up a couple days ago. It’s been rough going so far with limited watchable videos on RUclips. Stoked to see someone who can edit down a video to a watchable length with discernible audio, lol. Hope to see more from you!
Yeah, I didn't find a whole lot of videos on RUclips when I was learning. Akhavan's "Faceting 101" on RUclips is decent for covering the basics of faceting on an UltraTec. At some point, I plan on doing my own how to videos covering the way I do each step of faceting more in depth along with the tricks I've learned.
Hello from Oregon! Great job with that sunstone! I have one that has great red color. I love how you were able to orient the cutting to get all that color and schiller. Love the reds, golds, coppers, and peach coloring your cutting brought out. I’ve got a tanzanite round that has too many top facets and is too deep so it doesn’t bring out the color very well. I got it from Jewelry Television in the early 2000’s for less than $100. It’s not a big stone so it amazes me how they managed to cut so many facets in it.
Thanks! I really enjoy cutting the US locality gemstones. Especially ones I find myself, though I haven't been to any of the mines in Oregon yet to find any of the Oregon Sunstone. I can find little plain yellow pieces here in Utah, but they don't have any of the coloring and schiller like the pieces that can be found in Oregon.
I liked the way you present your self at the beginning of the Video! ...for futur clients : ) So, I just learned of Oregon Stone. And Yes, a Beautiful unusual color !
Just subscribed, been watching a few of your videos. I have some really strange glass material that would look awesome faceted but I'm not confident enough to cut it myself.
I have a peanut can full of feldspar (sun stones) that were given to me by the man that introduced me into the world of faceting 25 years ago. I will subscribe as long as you stop cutting door knobs!
You can have meet issues from the get go when using a center point when some of the facets that make up that center point aren't actually meeting at a point. I use a 40X loupe when cutting to get my meets in close. If any facets are over or under cut, they affect the meets of any subsequent facets that are based off that facet. When using meet point faceting where the crown cuts start based off the girdle facets, any rotation difference in the alignment of the stone compared to the pavilion facets will throw off the crown meets. Unless doing competition cutting, meets being off a little bit is just fine. There is a little flexibility in meets to where a stone can still look really good. And when using diagrams, some are a lot easier than others for getting the facets to meet properly. It is a lot easier to be off on designs that have facets that cut in not based on any sort of meet point to indicate that facet is cut in where it needs to be, but later meets depend on how accurate that facet was cut in compared to the design.
Amazing gemstone! I also cut with ultratec brand, RUclips just proposed to me this video. By the way, I am curious, which mineral material is this "sunstone"? Thanks again!
@@MattsCornerofGemCutting What in your opinion makes it better then the Batt. I love my Batt and am thinking of trying the BA5T. Thank you for taking the time to answer my questions.
I've only used my Batt lap for 3k pre-polish and my BA5T lap for final polishing with diamond. So I don't know how they compare as far as quality of polish and quickness, but the BA5T does seem to be a harder alloy and seems like it will last a lot longer than the Batt lap.@@glennhassig6668
Thanks! I use an Ultratech V5 Classic machine. They are nice and easy to use, but hard on the wallet if you want a new one. I found someone selling a used one. I haven't used another machine, but I think that Facetron and Poly-Metric mast machines are also high end but still not cheap. Some people prefer hand pieces over the mast machines. It just depends on preference. I think that the mast machines work great for diagram cutting. I would look around for someone selling their used equipment for beginning. Or if you happen to be near any faceters groups that you can try out some machines, that could help to.
Beautiful! I enjoyed watching you , but I think you need to elaborate on certain descriptions that you use, you say...schiller? What is that and what does it mean, same with your grinding discs, I hope you aren't offended by my comments, I just like to understand fully what I'm watching. I got kicked out of the ER whe my hubby needed stiches, I was so up in that, asking questons at every stage, I don't mean to be a pain in the ass, I'm just curious!! I think you have an amazing skill!
All good! Schiller in Oregon Sunstone is some bits of copper suspended in the stone that kind of looks like glitter. I use diamond grits for cutting. My 600 grit is a diamond plated topper lap which I use to cut in all the facets on the stone. I use 3000 diamond grit paste on a bat lap for pre-polish which gets the stone to a near polished look, and then I use chrome(chromium) oxide on a polishing lap for final polish to finish up the stone.
I used 60k Pandemonium Diamond Compound that comes in a tube. I had been using 50k diamond powder, but the Pandemonium compound has an agent that allows the diamonds to be dispersed using water instead of having to use oil, which I like. The pre-polish is done with the 3k grit of the same brand.
Thanks! That is weird, I think I had the right link to the listing of it, but maybe it changed after it sold. It should take you the the sold out listing now.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
This was a fun stone to cut! Let me know in the comments below any suggestions for video content like more or less of the cutting process, types of stones you would like to see cut, etc.. I'm open to suggestions as I build my channel and try to keep the content interesting for you!
Thank you so much for your help. 💝💝
Being an Oregonian I always appreciate when others appreciate our sunstones. Also being an Oregonian, I have buckets of em.
I had a whole quart jar, but I seem to have lost it. Some good Schillers too. Nothing super big though.
It's remarkable just how engaging and informative these videos are - bravo!
Hello Matt, thank you for sharing your cutting of a gem. Very nice outcome. looking forward to seeing other gems you cut.
Thank you! I will be doing more videos.
Great job! Schiller is why I love sunstone.
Yeah, i think that the schiller gives the stones more unique character.
I'm an Oregon Rockhound and go to the mines often. You did some nice work in this vid
I love your videos! I would love to see some close ups of the process-POV, for instance. Really interesting! I’m learning a lot!
Thank you!
I’m so intrigued by Oregon sunstones. Lovely work!
Yo Matt! Thanks for putting up a couple of decent videos on faceting!
I’m new to faceting myself. Picked up an UltraTec V2 in the early days of Covid and finally got around to setting it up a couple days ago. It’s been rough going so far with limited watchable videos on RUclips. Stoked to see someone who can edit down a video to a watchable length with discernible audio, lol.
Hope to see more from you!
Yeah, I didn't find a whole lot of videos on RUclips when I was learning. Akhavan's "Faceting 101" on RUclips is decent for covering the basics of faceting on an UltraTec. At some point, I plan on doing my own how to videos covering the way I do each step of faceting more in depth along with the tricks I've learned.
Hello from Oregon! Great job with that sunstone! I have one that has great red color. I love how you were able to orient the cutting to get all that color and schiller. Love the reds, golds, coppers, and peach coloring your cutting brought out. I’ve got a tanzanite round that has too many top facets and is too deep so it doesn’t bring out the color very well. I got it from Jewelry Television in the early 2000’s for less than $100. It’s not a big stone so it amazes me how they managed to cut so many facets in it.
Thanks! I really enjoy cutting the US locality gemstones. Especially ones I find myself, though I haven't been to any of the mines in Oregon yet to find any of the Oregon Sunstone. I can find little plain yellow pieces here in Utah, but they don't have any of the coloring and schiller like the pieces that can be found in Oregon.
I liked the way you present your self at the beginning of the Video! ...for futur clients : ) So, I just learned of Oregon Stone. And Yes, a Beautiful unusual color !
PRETTY SUNSTONE!
Beauty stone, love the color!
Thank you!
Love the color! Great videos!
Thanks!
Just subscribed, been watching a few of your videos. I have some really strange glass material that would look awesome faceted but I'm not confident enough to cut it myself.
I have a peanut can full of feldspar (sun stones) that were given to me by the man that introduced me into the world of faceting 25 years ago. I will subscribe as long as you stop cutting door knobs!
Great vid .thanks
Hello Matt, nice work, are you currently taking Oregon Sunstones for faceting? Al, Redding, CA
What type of Camera(s) do you use ? The camera to your left has an interesting mount/stand/extension (whatever it's called).
I love your vedios. I'm having trouble with my meets. You you have any suggestions for me? I'm a newbie. Thank you foe your help and vedios.❤
You can have meet issues from the get go when using a center point when some of the facets that make up that center point aren't actually meeting at a point. I use a 40X loupe when cutting to get my meets in close. If any facets are over or under cut, they affect the meets of any subsequent facets that are based off that facet. When using meet point faceting where the crown cuts start based off the girdle facets, any rotation difference in the alignment of the stone compared to the pavilion facets will throw off the crown meets.
Unless doing competition cutting, meets being off a little bit is just fine. There is a little flexibility in meets to where a stone can still look really good. And when using diagrams, some are a lot easier than others for getting the facets to meet properly. It is a lot easier to be off on designs that have facets that cut in not based on any sort of meet point to indicate that facet is cut in where it needs to be, but later meets depend on how accurate that facet was cut in compared to the design.
Cool channel I subbed you
Amazing gemstone! I also cut with ultratec brand, RUclips just proposed to me this video. By the way, I am curious, which mineral material is this "sunstone"? Thanks again!
Sunstone is in the Labradorite family. Oregon sunstone contains copper inclusions. Thanks! And good luck with your faceting!
@@MattsCornerofGemCutting thanks, u too!
Great video! What lap did you use for the final polish? Thank you for making these videos
That is the BA5T lap. Is the more expensive version of the BATT lap.
@@MattsCornerofGemCutting What in your opinion makes it better then the Batt. I love my Batt and am thinking of trying the BA5T. Thank you for taking the time to answer my questions.
I've only used my Batt lap for 3k pre-polish and my BA5T lap for final polishing with diamond. So I don't know how they compare as far as quality of polish and quickness, but the BA5T does seem to be a harder alloy and seems like it will last a lot longer than the Batt lap.@@glennhassig6668
What was the firat wheel grit you used?
Wonderful video! What brand of faceting machine do you use? What brand of machine would you advise for a beginner?
Thanks! I use an Ultratech V5 Classic machine. They are nice and easy to use, but hard on the wallet if you want a new one. I found someone selling a used one. I haven't used another machine, but I think that Facetron and Poly-Metric mast machines are also high end but still not cheap. Some people prefer hand pieces over the mast machines. It just depends on preference. I think that the mast machines work great for diagram cutting. I would look around for someone selling their used equipment for beginning. Or if you happen to be near any faceters groups that you can try out some machines, that could help to.
@@MattsCornerofGemCutting Thank you Matt
Beautiful! I enjoyed watching you , but I think you need to elaborate on certain descriptions that you use, you say...schiller? What is that and what does it mean, same with your grinding discs, I hope you aren't offended by my comments, I just like to understand fully what I'm watching. I got kicked out of the ER whe my hubby needed stiches, I was so up in that, asking questons at every stage, I don't mean to be a pain in the ass, I'm just curious!! I think you have an amazing skill!
All good! Schiller in Oregon Sunstone is some bits of copper suspended in the stone that kind of looks like glitter. I use diamond grits for cutting. My 600 grit is a diamond plated topper lap which I use to cut in all the facets on the stone. I use 3000 diamond grit paste on a bat lap for pre-polish which gets the stone to a near polished look, and then I use chrome(chromium) oxide on a polishing lap for final polish to finish up the stone.
Course material, my mind is eligible
When you do final polish, what grit do you using?
I used 60k Pandemonium Diamond Compound that comes in a tube. I had been using 50k diamond powder, but the Pandemonium compound has an agent that allows the diamonds to be dispersed using water instead of having to use oil, which I like. The pre-polish is done with the 3k grit of the same brand.
@@MattsCornerofGemCutting so where did you purchase them?
@@oregonaje4827 gearloose.co/shop/pandimonium-universal-base-diastik/
❤❤❤
Dear ,where buy this cutter angel mashine ,please tel me I am from srilanka ,how much this mashine ( angel mashine ) only ❤👍🙏
www.ultratec-facet.com/product/v5-analog/
Hi
Post more videos
I finally got another posted. Hopefully I can cut down the time between videos. I've been busy lately.
Привет ес у меня нада тебе
www.etsy.com/listing/1448897551/65x68mm-orange-oregon-sunstone-115-carat?show_sold_out_detail=1&ref=nla_listing_details
Thanks! That is weird, I think I had the right link to the listing of it, but maybe it changed after it sold. It should take you the the sold out listing now.
How much would that stone cost after finishing?