DIY 2SC5200 Amplifier 12v || Simple Powerfull Bass
HTML-код
- Опубликовано: 5 сен 2024
- Hi guys, in this video I Make an DIY 2SC5200 Amplifier 12v . Make it easy and simple circuit. This is home made
Components:
- Transistor 2SC5200
- Capasitor 1000 uf /35v
- Resistor 1K
- Potensio 50K
- Heatsink
#2SC5200
#2SC5200Amplifier
#MiniAmplifier
#DWTech
It's a good project for beginners in electronics, i would advise reduction of in put to 6v since 12v is overloading the transistor, after a longer use ,the whole amp will blow, thanks
lm using this circuit with 24V; it works, but it requires a large heatsink
Si parece bueno , ya veremos cómo suena, saludos desde Córdoba España
Nice circuit
ME ENCANTÓ ESA IDEA.QUERIA SABER ALGO SENCILLO PARA UN PARLANTE DE 18 PULGADAS Y QUE EXPLOTE EL SINIDO DE FUERTE.PIENSO QUE ESTE VIDEO ES PARA PARLANTE CHICO NO CREO QUE LE PUEDA METER UNO DE 18 PULGADAS PORQUE NO AGUANTARÍA PIENSO YO. TENES ALGÚN VIDEO QUE EXPLIQUE ESO MUCHÍSIMAS GRACIAS POR ESTA IDEA ESTA MUY BUENA👍👍👍👍👍
Esse tipo de circuito não completa o ciclo do áudio causando uma distorção muito alta, além de jogar uma tensão muito alta no falante. Perceba que o alto falante salta quando é conectado uma fonte de alimentação. O que esse circuito faz é amplificar apenas um dos semi-ciclos a depender do transistor NPN ou PNP. A bobina do alto falante tende a torrar em pouquíssimo tempo.
Obrigado por assistir,
Este circuito é apenas para fins experimentais e não é recomendado para uso a longo prazo
Qué duración de vida tendría este esperimento ?? Y que esperimento tendrías para uso prolongado??
Muy bueno el experimento
No quiero colocar en una moto
Terimakasih telah berbagi pengetahuan nya 👍
V
Vreau,sex
nice
Thanks
It would probably sound awesome in a box! Nice project!
😊😊😊😊
Legal gostei muito do seu trabalho
Montei este circuito, gostei da qualidade do som. Mas observei um aquecimento na bobina do auto falante. Deixei o circuito trabalhando por mas de duas horas e não ouve qualquer problema, quanto a potência ela fica em torno de 30 Watts, usei um auto falante de 6" /8 ohm. Com um twenter leson o famoso chupetinha.
@@mshariqkhan2297 yes
Use a series capacitor on speaker output, same as we used to do in 90s.
Very good share friend full time watching and stay connected ♥️
Thanks and sure
Fantastic, i like this ideas
Mantap bos apa boleh sy ikut berbagi pengalaman
God bless u
Wow nice
Thanks
Wow good
Very simple I ve learnt
Keep watching
Great you video
Muy buena enseñanza aprendizaje algo nuevo
Good work
I would NOT build this as is, there is no impedance matching or isolation for the input device. Good way to blow the output stage of you favorite music player. By drawing ALL the current thru the speaker, you risk blowing the speaker, and by feedback the source.
A few extra components and you can have a very viable audio power amp.
1) A transformer for the input AND output would provide some impedance matching AND assist in protecting the speaker by not having the current run thru the speaker to supply the amplifier.
2) Tmaximize
The speaker he used was maybe 40 watts so it isn’t going to blow but it might blow anything over 60 watts
Finaly someone with brains. De loudspeaker cone will also moves in one direction, only positive pulses , distortion by high power is garanteed, powerconsumption will increase when the transistor is heating up and will also heating up the voicecoil . If something happend with the transistor, it will damage your speaker. It's not possible to replace this ,,thing'' with a good quality amplifier. You better replace the speaker with a color lamp, for a good working lightorgan 😆
Nice video
Thanks
Mantapa gaessss
Good
Itu tansistor 2sc5200 nya kepanasan pada saat saya buka😅 tapi suaranya bagus dan bass nya nendang😊
Nice and good
Thanks
ACredita que fiz um e fucionou eu fiquei muito feliz da vida
Obrigado por assistir
@@dwtech6777 e continuo assistindo
Nice
Great brother I like
Thank you so much 😀
Me gusta mucho el vídeo cuando tengo tiempo me pongo a mirar quiere aprender
Very good 👍👍👍🙏
Gawol
Top
Very good man
no DC separasion from output to speaker... you will burn speaker with DC my Friend
need coil
Antap sip deh biaacari pengetahuan elektronic
Speaker langsung ke angkat kena teg plus...gak merusak speaker bos....
perlu ditambahkan coil, ini versi simplenya
many thanks brother!
Wow,good
Thank you for that sharing.
Tetu geti ni Jak wah ko cobaange ternyata berhasil suerene jeneng
Am I right in thinking there’s some negative feedback here stabilising the output because the base is biased from the speaker rather than direct from the positive rail, like in a class A common emitter?
Nice....
Thanks
What kind of transistor you've used is that 2N5551 or 2N5451?
Buendka un saludo del peru seria buenk tanbien un dhagra a
надо будет попробовать
Messa. Gostei. Legal. Parabéns.
Me escrevi no canal.
Obrigado por assistir
Good...
no entiendo xq utilizan ese transitor tan potente? acaso sera que le iran a sacar el maximo rendimiento? hay de menos potencia que se podria emplear
Maestro usted que es un genio, que potencia da 5000w RMS
Tiene que poner parlante en una caja
Parabens muito bom o projeto ! Posso usar um alto falante de 15wats 6 ohm neste amplificador fonte 12V ?
ভাই খুব ভালো
Olá ... Gostei da invenção mas dúvida é qual é a potência máxima que esse amplificador puxa, quanto de voltagem. Wolts
30w mas ele consome muito e gera muito calor recomendo um de classe AB
Distortion is all over the place
Mnttp broo' minta penjlasn nma'' alatny mklum orng awammm
Fiz um ficou bom, mas ficou chiando , tem como tirar esse chiado
El sonido es aceptable .Pero calienta demasiado el transistor..
Have you connected oscilliscooe to out put ?
Sure not ,the signal is squre wave
Saya mencoba kok suaranya kecil bgt kira2 apanya ya kak
oye también sirve con un transistor 13005L🤔
Cool merci
Adipoli super
Adorei muito
Obrigado por assistir
Bos kenapa suaranya bisa pecah. Barang yg sama.. Apa kurannya... Imformasinya... TQ
Me ha interesado el sistema, el chasis es especial o puedo construirlo en casa?.
Esta es la versión fácil, puedes probarla en casa. solo para experimentos no por mucho tiempo.
Gracias por ver
Exelente video, de cuantos w es el parlante
An amplifier needs at least 4 pins. This looks like a simple class A amplifier made with BJT NPN power transistor.
👍👍👍👍
Same procedure if i try to make stereo? side chanel is 1943?
This is cool
is konsa transfarmer use kiya hai
hello sir what is the wire? or name that u connect? what kind of wire?..
im studying for that content sir thank u🙏
Pake listrik ko pakai Aki nhi bang 🙏
Hi sir kasy ha sir ma chahta ho ap ak asi video bnay jis ma Bluetooth or simple amplifier bi ho or isi size ka speaker ho or osy input 12v splai dany par chaly or khas bat ya ky us ka simply sada circuit ho jo price ma bi kam ho thanks
Muito bom
simple amplifier...
yes bro
@@dwtech6777 you make 1 simple amplifier about 80w
This is not working
Puedo conectar una guitarra eléctrica ahi?
I think that you must indicate the 12v input in the circuit, we can't see it
tolong di tulis kembali klomponen utk amplifier 12V ok
Made same one. Definitely does not sound like this. It makes popping sound.
How is it work without... power???
Awesome❤️
C5296 ic tv se nikali kam kar jayegi ya nahin
How can I get a 3.5mm jack like yours?
online shop
On peut brancher ça sur courant alternatif? Comment alors?
❤❤❤❤jolie
sir I make your circuit at home but its not working
Buen video amigo necesito uno de mayor potencia
Dear, how many watts does it output? If I keep working in the same circuit, it outputs 50 watts... What is the appropriate transistor?
More like 18 watts the voltage in is 12 v, Power= v2/r r=8 which gives 18 watts. To produce 50 watts you need 20 Volt power voltage in.
It is possible to explain the PDF book making amplifier
Hello friend good video. When I connect the voltage I get a raised
That's good
यार स्पीकर में सैमसंग होम थिएटर का 500 वाट का स्पीकर लगाने पर स्पीकर गरम हो रहा है क्यों
क्योंकि यह सर्किट सिर्फ एक उदाहरण है, लंबी अवधि के लिए अच्छा नहीं है। अन्य एम्पलीफायर मॉडल का उपयोग करें
This kind of circuit can damage the speaker because the positive power is connected to it. The speaker becomes hot. I've tried this and my speaker gets smoked.
yes if it's too long, but you can add a resistor
@@dwtech6777 how to place the resistor sir
Se puede poner uno de 1000mf a 25v?
I am a strange person-is there a schematic of this? Why did you not use a breadboard for this and a little metal enclosure?
it is simple version
Can anyone explain how to prepare bigger version of amplifier like 10 inch woofer, speaker and tweeter?
Amigo si quiero añadir un vajo auna caja amplificada se puede ser eso como lo aria
Por favor, inténtalo
est ce que vous pouvez faire Une vidéo sur un baffle en plifier alimenté par une tension double de 9+9v
How would I wire it if I had no volume knob?
อยากได้วงจรคงจะดีกว่านี้
12 volts, how many amps?
Dose not matter
@@sajnapatel2288 noz
Bang saya rakit bgitu tapi volumenya nggk bisa di kecilin
Cuantos ohm es el parlante? Y que cantidad de Wath?
4ohm 15watt