#269
HTML-код
- Опубликовано: 17 сен 2024
- Remember to subscribe !
In this video I repair a damaged Uniden AX144 CB Radio.
Give this a Thumbs Up if you like it, it helps to grow the channel, also please share the video with your friends to help the channel to grow !
Test equipment appeal: • #84 Appeal For New or ...
To donate money to help fund items for the channel please use one of the methods below, cheers !
PayPal Donations: www.paypal.com...
Patreon: / thedefpom #ifixstuff #thedefpom #electronicsrepair
TheDefpom Merchandise: teespring.com/...
==========================================
Some Of My Electronics Tools (video and purchase links)
==========================================
Boonton
------
4220.
8210: defs.link/?u=e...
Fluke
------
8842A:
45: defs.link/?u=e...
343A: defs.link/?u=1...
5200A: defs.link/?u=a...
540B: defs.link/?u=0...
893A.
A90.
HP/Agilent/Keysight
------
4261A: defs.link/?u=0...
5005A.
5342A 18GHz: defs.link/?u=5...
6181B: defs.link/?u=b...
8012B: defs.link/?u=c...
8648B: defs.link/?u=d...
8901B: defs.link/?u=5...
DSOX1102G: defs.link/?u=a... defs.link/?u=1...
E3646A: defs.link/?u=1...
Marconi
------
2022D.
2955.
TF2103: defs.link/?u=6...
Rohde & Schwarz
------
SMY: defs.link/?u=9...
CMU200: defs.link/?u=8...
Polarad SPN: defs.link/?u=2...
Siglent
------
SDM3065X: defs.link/?u=1... defs.link/?u=1...
SDS2102 (hacked to 340MHz): defs.link/?u=1... defs.link/?u=1...
SPL-1008.
SDP1168X: defs.link/?u=1... defs.link/?u=1...
SDL1020X-E: defs.link/?u=a...
Other Equipment
------
KSGER T12 Soldering Iron: defs.link/?u=6... defs.link/?u=5c...
Quick 861DW: defs.link/?u=1... defs.link/?u=a...
S-993A: defs.link/?u=0... defs.link/?u=e...
EEVBlog BM235: defs.link/?u=1...
YR1030 Battery ESR: defs.link/?u=c...
Heathkit IT-12 Signal Tracer.
Racal Dana 1992: defs.link/?u=8...
Bird 43: defs.link/?u=4...
Sinadder 3: defs.link/?u=2...
Audio Control SA-3050A RTA: defs.link/?u=a...
Korad KA3305D: defs.link/?u=6...
PDVS2mini: defs.link/?u=8...
Valhalla 2703: defs.link/?u=0...
Feeltech FY6800: defs.link/?u=8... defs.link/?u=34...
Eakins Microscope: defs.link/?u=b... defs.link/?u=2...
Mustool G600: defs.link/?u=b... defs.link/?u=3...
Handheld Equipment
------
Uni-T UT210E: defs.link/?u=3... defs.link/?u=e...
DER DE-5000: defs.link/?u=0... defs.link/?u=1...
MK-328: defs.link/?u=0... defs.link/?u=7...
MESR-100: defs.link/?u=0... defs.link/?u=0...
ESR Meter: defs.link/?u=0...
HOPI: defs.link/?u=7...
PeakMeter PM6252: defs.link/?u=5...
HS1010: defs.link/?u=1...
Thermal Camera: defs.link/?u=2... defs.link/?u=4...
I really enjoyed your video. Thank you
Nice job
uPC1182 original audio-power IC can be replaced by uPC1242. Just one difference. The 1242 has two ground pins. The original 1182 has only one. Pins are in the same order, so long as you connect the two adjacent ground pins of the 1242 to the single ground pad.
73,
Chris at Nomad Radio
idle2600 - thanks, I hadn't worried about sitting down to compare pinouts as I had the right part, and I can get the right part if I didn't have it. if the correct part wasn't available I would of needed to look into it and do what you suggested.
The 1242 was all we could get after the 1182 was discontinued. Probably a moot difference this many years down the road.
Keep up the great work and 73!
Hello, I was wondering if you could share how you do the alignment of L16, 17 and 18. Per the instructions it calls for a frequency counter to be connected to TP3. When I try to do this I can’t seem to get the frequency counter to lock on the frequency. Please help. Thanks
Don't forget to clean and tighten the back pcb earthing screws, can cause hell on tx, sorry just my repair habits jumping in LOL :-D.
The case looks almost identical to the uniden 200 40ch uk rig.
All old unidens suffer from lazy rx needle syndrome, im sure uniden had a different s-meter standard, or they allways had a low i.f level to aid filtering, maybe lol.
Uniden schematics allways had a familiar feel, similar reused stages.
zx8401ztv - yes I always check the screws, 8 times out of 10 they are loose.
lol me too, yep allways loose.
loose screws, like most of the operators ;))
Throttle bottle, Ooow i was an operator too LOL :-D
c.b was a community hobby round my neck of the woods, great for older people that were disabled and just wanted a natter :-D
Nice JOB, you should meet TRX Bench from Germany and organize a CB repair GIG !!! That would be awesome.
👍👍👍👍👍👍
I have the President AX144 but it looks exactly like the Uniden AX144. Looking at the back of the radio and specifically the three power prongs sticking out from left to right what is the use of each prong? I don't have the power jack and must connect 12v to the radio differently and don't want to mix up positive and negative of course. Thanks
It’s the same radio, but a power cord from eBay or Amazon, they are cheap. Cobra is the same for instance,
on the meters screws stuck with thread locker/glue that wont turn, I heat a screwdriver and use it to heat/free it up
strange 1 that ic had a hole in it
What final is in the ax 144? I haven't cracked mine open yet
Probably the 2SC2312... but who knows if its been swapped out with something else after all these years.
Hi there, nice video, I have a snake 148 GTL here, it was modified for 26 and 27 mhz, I have put it back to just 27 mhz now, I have done a cap kit in it and aligned it using another receiver best I could but it seems to drift off frequency even after it has warmed up (1 hr later) from turning it on, would you be interested in aligning properly for me as I haven't got gear and can't find be bothered mucking with it any more, would it cost much to realign (ball park figure), I'm in the north island, Manawatu, cheers Bill.
Contact me through radiomods.co.nz and we can go from there.