Absolutely yes! You can also use rock salt (large crystals salt) and you can color them with inks before you mix them into the resin. Gives very interesting effect.
This is very nice idea n I even tried . They have come out really very well. But after drying also they are leaving moisture . Resin has set properly but there is watery layer on the top. Please suggest me something.
Many resins start to harden after 15 minutes when mixed. (It get thicker) so its harder to work with after this time. I don't wait, only good mixing than i work with it immediately. Hope that helped a little :)
Ah i saw this in the video with the harder resin. Maybe test it after a little while how the texture is. If its sticky you can use it like in the video i Think:D
Вижу эксперимент с солью удался) Это здорово) А в случае с кубиками, дай угадаю, не до конца соль смолой прописалась и получился эффект обломанного камня) Смотрится круто)
Ok, I will say, these are amazingly beautiful... BUT... I need to know, what happens to them, especially the best ones, the square ones, if they get wet? Have you tested this yet, since they're half made of salt..... Cheers
@@stargazer9798 Literally scolded my daughter for that recently when she was making these. Now I've seen this video I am buying a catering pack of salt for us haha. I can't believe I've never seen this method, the results are stunning I think. Can't wait to try. Let us all know if you try it :)
Я такое случайно заметила, когда ставила в соль трубочки для фиксации, а смола протекла на соль. Получился кусок соли как камень и текстуру видно и твёрдый, не осыпается
There are different types of epoxy where the ratio is best done using a scale, and others where doing it by volume is better. Your resin will usually say by which to do it.
It really depends on your brand of resin. Some are measured 1 to 1, some 2 to 1, I think there are even some that are 4 to 1. Some are by weight, others are by volume. The brand of resin you purchase should have instructions for that.
Absolutely yes! You can also use rock salt (large crystals salt) and you can color them with inks before you mix them into the resin. Gives very interesting effect.
The effect the salt gives it is so awesome! I love it!
Какие же классные идеи!!! Все украшения такие красивые, слов нет!!! Лучше твоих идей и видео нет на свете! У тебя просто золотые руки! Люблю тебя!
This comment is so sweet ❤️
please wear a mask and safety equipment (saw a video about epoxy fumes •even if it doesn’t a smell • causing lung damage)
💕 thank for all the ideas
Hello, I'm from Vietnamese.
I found it helpful to me when I watched this video .It is useful
buttiful wow thank you 😊
Are you using regular table salt or Epsom salt?
This is very nice idea n I even tried . They have come out really very well. But after drying also they are leaving moisture . Resin has set properly but there is watery layer on the top.
Please suggest me something.
i love your weighing scale! thank you for sharing this
I wish I could do that... 😅 I don't have materials to do it . But This is so Good.. And really wanna try it
Such an awesome idea 👏🏻👏🏻👏🏻
Lovely
Is it complesery to add hardener and will it dry in 24 hours
These are so cool. I wish I could make things like this 11/10
And is it complesery to use UAV light
Bonne idée bravo
They are awesome, thank you, Sveta Fresh.
Very nice!
Hey have a question, should I let my resin rest for some time after mixing the resin ans the hardner? If so, for how long
Many resins start to harden after 15 minutes when mixed. (It get thicker) so its harder to work with after this time. I don't wait, only good mixing than i work with it immediately. Hope that helped a little :)
Ah i saw this in the video with the harder resin. Maybe test it after a little while how the texture is. If its sticky you can use it like in the video i Think:D
I love your videos and i started to make some accessories thank you 😊
Amazing handmade resin jewelry !
Wow cariño k pasada es bellísimo divino espectacular me encanta un besazo y mi like cielo 😍 😍 😍 😍 😍
I have a question. The epoxy resin and hardener are written as A and B glue right. Is B glue the hardener?
Yes
Вижу эксперимент с солью удался)
Это здорово)
А в случае с кубиками, дай угадаю, не до конца соль смолой прописалась и получился эффект обломанного камня)
Смотрится круто)
Все верно 👍😊😂
Magic and wonderful of you to share your ideas. Thanks
Please, please tell me you are Selling some of these! They are so amazing! I cant believe you Can do This!
I want to khow if it get into
the hot water..
Because the resin is fully cured hot water will not do anything other than keep the jewellery clean
What are the hooks called that you stick on top of the sphere pendants and where can you get them from?
Hey sis what is the name of this song please replay
круто! всё думала, как сделать матовые кругляши !!! и сочетание соли и смолы не давало покоя )))
I am definitely makin one with this salt and epoxy resin hack!!
Thank you so much for showing this ❤️❤️❤️❤️❤️❤️👍👍👍👍👍😀😀😀🎊😊☺️
Ok, I will say, these are amazingly beautiful... BUT... I need to know, what happens to them, especially the best ones, the square ones, if they get wet? Have you tested this yet, since they're half made of salt..... Cheers
tested in water, everything is fine with them. The salt does not dissolve.
LOVE this technique!!! Love your vids too!!☺️😉🥰
Hah!!!!!!!
Early! yEs I have UV resin!!!!and omg
I have the sameee square mold at the beginning! Mine is 16mm
Did it work with uv resin?
Sarah Fields neeed to find time to do it, though
Sarah Fields and my mum will say stop wasting my fricking salt
@@stargazer9798 Literally scolded my daughter for that recently when she was making these. Now I've seen this video I am buying a catering pack of salt for us haha. I can't believe I've never seen this method, the results are stunning I think. Can't wait to try. Let us all know if you try it :)
What salt is used
Can i use UV resin?
Of course but only if you have the necessities required to cure it
Great idea! ThankU, very creative 😊
Hello everyone,,,does anyone know who sings these songs? Also beautiful items...I enjoy your videos..
Я такое случайно заметила, когда ставила в соль трубочки для фиксации, а смола протекла на соль. Получился кусок соли как камень и текстуру видно и твёрдый, не осыпается
Very great ideas, I really like
sparkly!
Yes I love your work but it would be nice to have the process explained along with indicating the items used and get rid of the music.
This isn’t supposed to be a tutorial
SO COOL!!!! ARE THESE CREATIONS TRIAL AND ERROR MIXTURES OR DO YOU HAVE A 'RECIPE' THAT YOU USE
I loved the video!
But how long does the epoxy need to set to make the putty you used in the second part?
You gave me an idea,,egg shell,whole,,,emptied out and shell used as mold
What are the pieces that you glue on top of the ball necklace called? I’m trying to find them!
Bead cap bails, here's an AliExpress link for the glue-on type:
a.aliexpress.com/_d9deW1R
And the screw-in type:
a.aliexpress.com/_BfZgu6wh
What kind of resin?
do you know how to figure out the measurements for the mixture without a scale? i can’t afford one! 🥺🥺
There are different types of epoxy where the ratio is best done using a scale, and others where doing it by volume is better. Your resin will usually say by which to do it.
You can order one online, some of them have free shipping, its going to take longer but its cheaper 💞
You can get scales way cheaper then most resins
Put it on your birthday and Christmas list
Hi, I tried this technique, but for some reason, the pieces 'sweat' they won't stop even after some days.
What went wrong?
Thanks.
Hi, yes I worked with Salt and I happened the same :(
@@MarianaBriceno8 shame, because they were so pretty!
what brand of resin do you use in your videos?
Can anybody tell me what kind of resin this is?
Very creative!
Thank you Nelly. ❤🌹❤🌹❤🌹
👏👏👏👏👏👏👏👏
I love this!!!!
why the colour of ur nail is changing?
They probably have thermal or UV changing nail polish, where the color changes with heat or UV light
Christina Polanco thanks 4 the helful info
How come the cubes turn out like that, I mean not plain...
how much add hardner in resin
It really depends on your brand of resin. Some are measured 1 to 1, some 2 to 1, I think there are even some that are 4 to 1. Some are by weight, others are by volume. The brand of resin you purchase should have instructions for that.
9.06 у меня такие же стаканы.
Hai, I am from India and I am your ------
What ? ...
Fan
@@pradeep.kumar966 😊😊
Her nails change color!!!
Tayla K hahahaha that's what I noticed too
Sure wish you would have told us what you were doing. As a beginner I didn't have a clue!
Um, this would be better if someone were explaining the process rather than the loud annoying music.
Nice....better when I mute irritating background noise.
Its salt and resin?????
????
You really should wear gloves when working with these toxic chemicals
You should WEAR GLOWS!!! Epoxy resin is an irritant!!!
Please we need to more vidioes without molds
Can you please name the songs you use?
Plz wear gloves/mask.
Не хвотает твоего голоса
buying natural beads is better for the environment and probably cheaper
Wear gloves please
@nerdecrafter