.338 Lapua is no joke. It's a definite reach out and touch rig. Good friend of mine has a Vortex scope on his. I cracked one off at a 1,200 yard gong and hit it. His personal best is a 1,600 yard. Truly impressive 160 yards shy of a mile. And I'm willing to bet it has enough horsepower to reach past a mile
WCTV yeah I was gonna say, there’s several that can ding a target at over a mile, they trouble would be being accurate enough of a shooter to hit it. I’d be lucky to hit 250 yards ha
@@swalther10 brother I appreciate the humble additude, but you would smoke 1 foot gongs at 300 yards all day with a lapua and a good scope. I can say that with confidence ;)
I went the 338 RUM full custom from CA in the early 2000's... most accurate custom I've ever had built! 250 grain Barnes is what it loves... .348" with a 5-shot string, it's my elk thumper... 1 and done! Fun to shoot...
I've got the Savage 111 Long Range Hunter in .338 Lapua. She shoots hand loaded 250gr Bergers into 1/4" groups at 100. If you shoot .338 Lapua, you really need to load .338 Lapua because factory ammo will cost you about $7 per shot. I used to load the Bergers for about .90c a shot, but it's over a dollar now... which is far better than $7 a pop for sure. With other bullets I'm still under a dollar each. That muzzle brake is highly effective though, the recoil is about like shooting 30.06 Sprg so it's not uncomfortable to shoot.
I've got the 110BA original. Absolutely love it. As for what I'd like to see: a lot more target work and more big game hunting. Also, some solutions about the high cost of ammo!
Reloading is the solution to the cost of the rounds. I have a 110BA as well. Reloads average out to about $1.10 a round using Lapua brass, H110, and Nosler bullets. That still works out to be my most expensive rounds. 1 pound of powder is almost exactly 100 rounds.
@@ChristopherKnN I checked prices online, and found Lapua 300 grain with Scenars for around $8.50 per round. They are less expensive than 250 grain rounds, maybe a demand thing. I bought 100 rounds a couple years back and they were half that. Any problem with powder or bullet availability?
@@Reach41 I primarily do long range target shooting with it, so I try to stick with a consistent recipe. It has been a challenge at times the last couple years to find components, but I am patient and won't pay the scalpers. Luckily, I have many more calibers to choose from for my addiction. The joys of reloading.
I also have the 110 BA. Did some ELR out west with it at 2,000 yards using Berger 300g. Shot great for factory barrel after you found out what it liked.
I wouldn’t worry about a suppressor on a 338LM the first shot puts enough heat into one you get a haze from there on out without serious cooling off time in between shots, stick to the brake and your barrel will last longer
Adding a suppressor will not affect barrel life. You will probably never burn a barrel on something like a 338 LM anyways as it would cost more than 10x what the rifle goes for new and who shoots 2k rounds of 338
@@Nick-sx6jm I've had mine 3 months and done 700 rounds already. It's only 7 trips to the range. Suppressors store heat that would normally exit the barrel and do add considerably to barrel wear. 338lm barrel life expectancy is around 1500rds.
@@ancientrenegade9243 If your sitting down and shooting a box of ammo through it quickly then maybe it would affect the muzzle end a bit more. Getting the barrel really hot is the worst thing you can do to a barrel though and if you shoot that it much then the best thing you can do it let it cool between shots. I have a 340 wby which is about identical with probably over 1k rounds on it and it still shoots as good as day 1. Apparently Finnish snipers get a rebarrel at around 4k rounds to keep military accuracy out to 1k yards so you should be fine putting 2k through it as long as its not abused.
Yeah, the 338LM hits like a sledgehammer, even at distance. Have mine going through my Ruger RPR and Vortex Strike Eagle (35mm tube) with Atlas bipod and Magpul monopod for a touch more adjustment. Has enough punch to knock holes in my 12-inch AR500 gong at 1k yards, using Hornaday HPBT precision match grade ammo too.
A quick way to adjust is once you shoot, move your lead sled until the cross hairs are on the the bullet hole. Then adjust the scope until the cross hairs are back on the bullseye. It's easy to do on a stable rest like a lead sled and you don't have to worry about counting clicks and going the wrong way. I've never shot one, but that Lapua looks like a thumper.
I found it easiest to bore sight the scope with the naked eye and then hold center, fire, then with the rifle stable, hold center again, then move the reticle to the impact.
Love .338 LM.. I used it “on work” at the time.. And it has remained my favorite for years .. I still love it even if now the best for me is the .375 CT .. however it remains a great beast😎
I love my 338 lapua. It's not a hunting set up I have a ruger precision. I'll tell you it's been shot by friends of mine and even a friend's 13 yr old. The recoil with my rifle is about a 6.5 creedmoor but the precision rifle is around 16lbs
So I did get mine it is a ruger precision. Ammo is expensive but I absolutely love shooting that rifle. I took it to the local outdoor range and it knocks the bowling pin targets right off the target stand. Even broke one of the target hangers
I had a Ruger # 1 re-barreled and reworked and chambered for 330 Dakota, The rifle would shoot lights out and I did hunt elk with it. In the end, it was just too heavy and too much recoil so when I paired down my collection, it went away and I kept a Sako 75 in 338 WM. I killed a bunch of moose with that rifle when I lived in Alaska. Oh, and 210 gr Barnes X bullets shot accurate and flat shooting. The same bullet shot well out of the Ruger # 1 too.
I have one! a custom one I had built ! I had a gunny ,Eric Behlke punch a chamber and marry up to a stainless action and then I set it in a composite stock pillar bedded and bedded with acra glass stee bedding and threw a Leupold vx3i and I love it .I reload for it and am glad I stocked up on supplies years ago . It loves retumbo and the old Speer deepcurls in 250 and 300 grain and loves accubond 300 grain out past 600
Hey man. Just wanted to stop in and say how happy and proud how much your channel has grown. I've been around since 100k and to see you at 400k is amazing. You're doing it right! Keep it up. Take care Love from Canada!
People! Clayton the Adventure Cowboy 🤠?! You can’t make that up ! Our intrepid rifle man went out into the thick and wild with a.338 Lappula rifle and came back alive ! ( I hear the recoil is a killer) Now on with the post !
One 250 grain hole looks like a three shot group already lol sure do love the way a 250 thumps a critter seen deer flip up sideways and can see the white belly also seen a few elk move three steps sideways to try and gain their fitting again 😁 and that's with a win mag 338
I can say this .....338 lapua boo lots are not cheap....I agree with that.....brother I love listening to your videos...."dont put a staple through your finger"....."It hurts pretty good"...being from the hills of Kentucky its good to hear understandable talk..lol-Going P dog hunting in September (2023) may take it with us if it comes in....who knows.
Love the videos. I bought my very 1st 338LM last week. Savage 110 elite precision. Still undecided on which optic to put yet, but I'll set it up soon. My price was $3000Cad for the rifle. American eagle 250gr was $120 N hornady match 250gr was $195 Pretty pricey. Lol so I'll be taking more time shooting. Your 338 videos were the reason I purchased one. Long story short lol. Keep it up love the videos coming from 🇨🇦
Right on. Awsome video. Lookin forward to tomorrow's video. The ol 338 lapua is a hot round. I was watching one of your what's the best deer hunting round videos and it helped me decide on a new Bing bang
I don’t know why but I always love your sighting on videos… not many out there show the whole process of sighting in and there is something so satisfying about watching you walk those bullet holes closer to the bullseye. 🕳 🎯 If possible could you do a video of the bore sighting process for us newbies? (I’ve only ever shot irons or pistol optic). Who tee whoooooooo!
Every time I watch you zero your scopes, I'm always talking to the screen, no that's too much, no turn it the other. I feel like I'm with buddies at the range. Even my wife was like, what? 😄
I really wish that .416 Lapua was a thing, but with about a 100mm overall length from 70mm long Sig Sauer Hybrid cases, like on the .277 Fury. Edit: or more obviously, like their .338 Norma hybrid brass, but with .338 Lapua, or maybe even longer, like 85mm, with a 127mm overall length. That really would be my dream heavy cartridge, but I want it chambered 8n an 1885 High Wall. 😳👍
I just bought the Ruger Percision .338 lapua. My scope only has 18 zooms though. I have only fired 4 rounds through it. I ordered bullets and a die set to reload for this caliber because as you said it’s crazy expensive. My local gun shop has some Federal ammo in stock for the low price of $150 for 20 rounds! The guy who sold me the gun gave me all the ammunition he had for the gun 40 rounds. I think I can reload it for around 40-50 dollars per 20 so I will be doing that for sure. Good shooting sir.
Yeah, we all hurt ourselves even if we don't tell! But get some liquid bandage and put on to keep from getting infected. I got a hang nail and it got infected and would not heal, so antibiotics for 10 days! Love the Savage BA!
Good video and shooting! I love the Savage 110. I have one in 7 MM Rem Mag. that also shoots under .5 in groups at 100 yds. I have several rifles and the Savage 110 is one of my favorites!
You should try longer shots. It is made for that . If you find the place , try 1600 and 2000 yards .I think you can do it easily with local farmers . Thanks and we wait that ....
I have the same set up with the Nikon 1000 black love Irgun is not the word and the savage breac really works great for control of the recoil great vid
Dang right it ain’t cheap (ammo) I have the Savage 110 in a HS Precision stock and lovvvvvvvvve it. ALMOST bought a 50 BMG instead but something about the 338 LM. Plus I can pack the 338 in the woods (still heavy though) Thank you for putting this video out. As stated, love the 338 Lapua. Mmm mmmmmm
That’s a nice rifle, I love the optic! I’ve gotten into crimson trace since seeing your videos as well. Like the video of the mule deer hunt I seen it back when you originally posted. Been thinking of getting 338 lapua in Ruger precision but they feel heavy. Was the 110 ok to carry in the mountains?
On the topics of 338's, and because I know you're also a big fan of the 338WM, I thought I would mention the new 338 that just got SAAMI approval. I was checking on the specs on a Weatherby Mark V Hunter in 280AI and saw that Weatherby has released the 338RPM. I know the 6.5RPM is a screamer, not as fast as the 6.5x300, but the 6.5 RPM has intrigued me for awhile. I always thought there's something to it if Weatherby was willing to get away from it's iconic cartridge design. I've heard the 338RPM the ballistic twin the the 338WM, but I'm going to check out the numbers myself. Honestly, I'm hoping your mystery gun you can't tell us about until June is, in fact, a 338RPM. Also, if you can get your hands on one, I'd love to see how this 338LM compares to the Norma Magnums.
Saludos mi hermano después de mucho tiempo sin conectarme 😁acabo de comprar un .300 winmag, beretta 96a1 y una pistola cz p10 en calibre .380. Pronto subiré el review de estas armas acá en mexico donde están demasiado restringidas. Pero como soy militar en retiro tengo acceso a la compra.
I have the Savage 110 FCP in .338 Lapua. I like it, she'll beat you though. I haven't shot it much, ammo is crazy expensive for it. I got an SWFA 3-15x42mm FFP mil. For a budget target scope, I'm liking those SWFA scopes. The only draw back to them is lack of zero stop.
I got nipped by a damn 23 gauge pin that went directly left of the box I was making and straight into my index finger. I know your pain, brother. Make sure you don't mess with and lemons or gas for a bit. I swear, the tiny holes like that hurt the most. 😆🤙🏾
I need a new rig. I was thinking of getting something on this end of the spectrum. I want to get something that is kinda a "standardized round". It looks like either 338 lapua or something in the 308 house for me, based on what ammo I can find on island.
Please 🙏 can U put the awesome statistics of the 30 Thompson which is basically a 308 creedmoor. It's not around cause they didn't bring up any good rifle's in that calibre.
![BIGTIME FAIL with This Cheap Gun...[SCARY]](http://i.ytimg.com/vi/JC3wkc7a2oM/mqdefault.jpg)
![BIGTIME FAIL with This Cheap Gun...[SCARY]](/img/tr.png)
.338 Lapua is no joke. It's a definite reach out and touch rig. Good friend of mine has a Vortex scope on his. I cracked one off at a 1,200 yard gong and hit it. His personal best is a 1,600 yard. Truly impressive 160 yards shy of a mile. And I'm willing to bet it has enough horsepower to reach past a mile
watch markandsam they reach out with this bad boy past 2 miles!
WCTV yeah I was gonna say, there’s several that can ding a target at over a mile, they trouble would be being accurate enough of a shooter to hit it. I’d be lucky to hit 250 yards ha
@@swalther10 brother I appreciate the humble additude, but you would smoke 1 foot gongs at 300 yards all day with a lapua and a good scope. I can say that with confidence ;)
The longest sniper kill was made by a 338 lapua, by a Canadian sniper. It can do a mile easy
I went the 338 RUM full custom from CA in the early 2000's... most accurate custom I've ever had built! 250 grain Barnes is what it loves... .348" with a 5-shot string, it's my elk thumper... 1 and done! Fun to shoot...
💪💪💪
338 RUM is a beast. I have a 700 BDL Remington one of the first they made. Awesome gun!!!
Which has more power, The 338rum or the lapua?
@@JonR35 The Lapua, but generally not by much.
If I remember right it's like 100-150 FPS faster... so not much of a gain
I've got the Savage 111 Long Range Hunter in .338 Lapua. She shoots hand loaded 250gr Bergers into 1/4" groups at 100. If you shoot .338 Lapua, you really need to load .338 Lapua because factory ammo will cost you about $7 per shot. I used to load the Bergers for about .90c a shot, but it's over a dollar now... which is far better than $7 a pop for sure. With other bullets I'm still under a dollar each. That muzzle brake is highly effective though, the recoil is about like shooting 30.06 Sprg so it's not uncomfortable to shoot.
One of my favorite platforms,, from older videos. This thing looks good and hits like a champion boxer. Thanks again WTW YA DA MAN 💪🏽🎥💯👍🙏🏻
Gotta love 338!!!
That group was phenomenal. Beautiful set up you got there. You could very well make your longest shot ever with that setup.
I've got the 110BA original. Absolutely love it. As for what I'd like to see: a lot more target work and more big game hunting. Also, some solutions about the high cost of ammo!
💪💪🦌🦌🦌
Reloading is the solution to the cost of the rounds. I have a 110BA as well. Reloads average out to about $1.10 a round using Lapua brass, H110, and Nosler bullets. That still works out to be my most expensive rounds. 1 pound of powder is almost exactly 100 rounds.
@@ChristopherKnN I checked prices online, and found Lapua 300 grain with Scenars for around $8.50 per round. They are less expensive than 250 grain rounds, maybe a demand thing. I bought 100 rounds a couple years back and they were half that. Any problem with powder or bullet availability?
@@Reach41 I primarily do long range target shooting with it, so I try to stick with a consistent recipe. It has been a challenge at times the last couple years to find components, but I am patient and won't pay the scalpers. Luckily, I have many more calibers to choose from for my addiction. The joys of reloading.
I also have the 110 BA. Did some ELR out west with it at 2,000 yards using Berger 300g. Shot great for factory barrel after you found out what it liked.
I wouldn’t worry about a suppressor on a 338LM the first shot puts enough heat into one you get a haze from there on out without serious cooling off time in between shots, stick to the brake and your barrel will last longer
Adding a suppressor will not affect barrel life. You will probably never burn a barrel on something like a 338 LM anyways as it would cost more than 10x what the rifle goes for new and who shoots 2k rounds of 338
@@Nick-sx6jm I've had mine 3 months and done 700 rounds already. It's only 7 trips to the range. Suppressors store heat that would normally exit the barrel and do add considerably to barrel wear. 338lm barrel life expectancy is around 1500rds.
@@ancientrenegade9243 If your sitting down and shooting a box of ammo through it quickly then maybe it would affect the muzzle end a bit more. Getting the barrel really hot is the worst thing you can do to a barrel though and if you shoot that it much then the best thing you can do it let it cool between shots. I have a 340 wby which is about identical with probably over 1k rounds on it and it still shoots as good as day 1. Apparently Finnish snipers get a rebarrel at around 4k rounds to keep military accuracy out to 1k yards so you should be fine putting 2k through it as long as its not abused.
@@Nick-sx6jm if you say so mate. I'm sure a 1.5moa gun is acceptable for some people.
@@ancientrenegade9243 That’s around $50,000 in ammo at today’s prices. Hope you have a sponsor.
Yeah, the 338LM hits like a sledgehammer, even at distance. Have mine going through my Ruger RPR and Vortex Strike Eagle (35mm tube) with Atlas bipod and Magpul monopod for a touch more adjustment. Has enough punch to knock holes in my 12-inch AR500 gong at 1k yards, using Hornaday HPBT precision match grade ammo too.
Amazing group! Every Savage I've ever owned shot great out of the box!
A quick way to adjust is once you shoot, move your lead sled until the cross hairs are on the the bullet hole. Then adjust the scope until the cross hairs are back on the bullseye. It's easy to do on a stable rest like a lead sled and you don't have to worry about counting clicks and going the wrong way.
I've never shot one, but that Lapua looks like a thumper.
I found it easiest to bore sight the scope with the naked eye and then hold center, fire, then with the rifle stable, hold center again, then move the reticle to the impact.
Yeah. Just make sure you turn your turrets in the opposite direction, hahaha!
Love .338 LM.. I used it “on work” at the time.. And it has remained my favorite for years .. I still love it even if now the best for me is the .375 CT .. however it remains a great beast😎
I love my 338 lapua. It's not a hunting set up I have a ruger precision. I'll tell you it's been shot by friends of mine and even a friend's 13 yr old. The recoil with my rifle is about a 6.5 creedmoor but the precision rifle is around 16lbs
So I did get mine it is a ruger precision. Ammo is expensive but I absolutely love shooting that rifle. I took it to the local outdoor range and it knocks the bowling pin targets right off the target stand. Even broke one of the target hangers
I had a Ruger # 1 re-barreled and reworked and chambered for 330 Dakota, The rifle would shoot lights out and I did hunt elk with it. In the end, it was just too heavy and too much recoil so when I paired down my collection, it went away and I kept a Sako 75 in 338 WM. I killed a bunch of moose with that rifle when I lived in Alaska. Oh, and 210 gr Barnes X bullets shot accurate and flat shooting. The same bullet shot well out of the Ruger # 1 too.
One of my favorite long range calibers, I'm so glad you brought it back out, nice shooting!
One of my favorite caliber I love reaching out and touching beer cans at really long ranges
Hands down my favorite rifle I own. Being in California outside of a Barrett .416 this is the largest round the establishment will allow us to own...
💪💪
I have one! a custom one I had built ! I had a gunny ,Eric Behlke punch a chamber and marry up to a stainless action and then I set it in a composite stock pillar bedded and bedded with acra glass stee bedding and threw a Leupold vx3i and I love it .I reload for it and am glad I stocked up on supplies years ago . It loves retumbo and the old Speer deepcurls in 250 and 300 grain and loves accubond 300 grain out past 600
Hey man. Just wanted to stop in and say how happy and proud how much your channel has grown. I've been around since 100k and to see you at 400k is amazing. You're doing it right! Keep it up.
Take care
Love from Canada!
Hey Mike! Appreciate you watching!
People!
Clayton the Adventure Cowboy 🤠?!
You can’t make that up ! Our intrepid rifle man went out into the thick and wild with a.338 Lappula rifle and came back alive ! ( I hear the recoil is a killer)
Now on with the post !
I always use 1/4" graph paper when sightin in. After 1st shot just count the squares, adjust and second shot is sighted in.
I know you've been wanting to revisit this beast. Good for you Adam. Thanks
I love it!
One 250 grain hole looks like a three shot group already lol sure do love the way a 250 thumps a critter seen deer flip up sideways and can see the white belly also seen a few elk move three steps sideways to try and gain their fitting again 😁 and that's with a win mag 338
I can say this .....338 lapua boo lots are not cheap....I agree with that.....brother I love listening to your videos...."dont put a staple through your finger"....."It hurts pretty good"...being from the hills of Kentucky its good to hear understandable talk..lol-Going P dog hunting in September (2023) may take it with us if it comes in....who knows.
East Tn here. Love this guy and his videos
I always wanted one but settled for my 6.5creed. :)
Thanks!!
Me too :) still fun! And sure is cheaper.
Love the videos. I bought my very 1st 338LM last week. Savage 110 elite precision. Still undecided on which optic to put yet, but I'll set it up soon.
My price was $3000Cad for the rifle.
American eagle 250gr was $120
N hornady match 250gr was $195
Pretty pricey.
Lol so I'll be taking more time shooting.
Your 338 videos were the reason I purchased one.
Long story short lol. Keep it up love the videos coming from 🇨🇦
Now, that's a real "reach out and touch something" rig if ever there was one!
Right on. Awsome video. Lookin forward to tomorrow's video. The ol 338 lapua is a hot round. I was watching one of your what's the best deer hunting round videos and it helped me decide on a new Bing bang
Always appreciate you watching
1 mile silhouette is what I’d love to see. This is also a goal of mine. I also have a .338 Lapua in a Ruger RPR. So far I’ve been out to 500 yards.
I don’t know why but I always love your sighting on videos… not many out there show the whole process of sighting in and there is something so satisfying about watching you walk those bullet holes closer to the bullseye. 🕳 🎯
If possible could you do a video of the bore sighting process for us newbies? (I’ve only ever shot irons or pistol optic).
Who tee whoooooooo!
Already filmed that ruclips.net/video/OC0bNuMbSeM/видео.html
Appreciate you watching
@@WHOTEEWHO thanks brother I’ll check it out 👍
I really wish i could have 338 lapua yeeting bing bang...
Every time I watch you zero your scopes, I'm always talking to the screen, no that's too much, no turn it the other. I feel like I'm with buddies at the range. Even my wife was like, what? 😄
Very nice set up i love the .338 caliber happy hunting
"You don't wanna mess around at all with the 338 lapua" well said.
That was an absolute awesome grouping.
Great caliber, great rifle. That Savage is sweet. With that sunshade on your scope I believe that you may just be able to see back in time!
As much as I like the .338, I still favor my .375. H& H in my Ruger No.1. Tropical
Always take the sight to the bullet. Thanks for the great content!!! Love the vids as always!!!
Am I the only one who got fired up when the turkey gobbles at the crow at 4:26
Yup. Had one real close
I really wish that .416 Lapua was a thing, but with about a 100mm overall length from 70mm long Sig Sauer Hybrid cases, like on the .277 Fury.
Edit: or more obviously, like their .338 Norma hybrid brass, but with .338 Lapua, or maybe even longer, like 85mm, with a 127mm overall length. That really would be my dream heavy cartridge, but I want it chambered 8n an 1885 High Wall. 😳👍
Now this is about to be a really fun video.
Lifetime warranty on those Crimsom Trace as well….nice $600 long range scope for sure. ….
I just bought the Ruger Percision .338 lapua. My scope only has 18 zooms though. I have only fired 4 rounds through it. I ordered bullets and a die set to reload for this caliber because as you said it’s crazy expensive. My local gun shop has some Federal ammo in stock for the low price of $150 for 20 rounds! The guy who sold me the gun gave me all the ammunition he had for the gun 40 rounds. I think I can reload it for around 40-50 dollars per 20 so I will be doing that for sure. Good shooting sir.
Awesome!!!
Nice shooting! It would be cool to see a drop test with the.338 Lapua!🇺🇲✝️
Someone let me borrow their .338 Lapua. It put 3 shots into less than 1/2” at 300 yards! Amazing rifle.
Wow great group with off the shelf ammo.
I love it
Yeah, we all hurt ourselves even if we don't tell! But get some liquid bandage and put on to keep from getting infected. I got a hang nail and it got infected and would not heal, so antibiotics for 10 days! Love the Savage BA!
One hole aaccuracy at 100 yds with 3 shots!! Great shooting WTW!!
Good video and shooting! I love the Savage 110. I have one in 7 MM Rem Mag. that also shoots under .5 in groups at 100 yds. I have several rifles and the Savage 110 is one of my favorites!
You should try longer shots. It is made for that . If you find the place , try 1600 and 2000 yards .I think you can do it easily with local farmers . Thanks and we wait that ....
I have the same set up with the Nikon 1000 black love Irgun is not the word and the savage breac really works great for control of the recoil great vid
Dang right it ain’t cheap (ammo)
I have the Savage 110 in a HS Precision stock and lovvvvvvvvve it. ALMOST bought a 50 BMG instead but something about the 338 LM.
Plus I can pack the 338 in the woods (still heavy though)
Thank you for putting this video out.
As stated, love the 338 Lapua. Mmm mmmmmm
Finely! The 338!!
Kinda funny that this cartridge got so popular when the 340 weatherby mag is actually a little more powerful and just as good
That’s a nice rifle, I love the optic! I’ve gotten into crimson trace since seeing your videos as well. Like the video of the mule deer hunt I seen it back when you originally posted. Been thinking of getting 338 lapua in Ruger precision but they feel heavy. Was the 110 ok to carry in the mountains?
Wasn't too bad to carry around
Like to see the 200 yard drop on that rig 👍🏼
Soon
Found some lapua brand the other day for $89 a box…. Love that rifle and you always do it justice appreciate you WTW
Wow good deal
I want to step up from my 110BA to the 110 elite precision to get the 30 inch barrel. Cheaper to swap rifles than to swap on a 30 inch barrel.
That is a nice one
Sweet looking rig, and it’s a shooter too.
Damn,, half inch group at 100 yards... That's .338 for you. I bet you can drive a tack with it.
Hey WTW, how about smackin' some clay blocks at 100yds???
WoW, nice set up. She's a thing of beauty. Great shooting. Take Care.
Well ye it is it's one of the best sniper rounds ever
I have the same Crimson Trace ,I believe they are made in the old Nikon factory in the Philippines.
Yes it is actually the scope he has on there is the same scope as the old nikon fx1000 just branded
That's my dream rifle.
Sweet I’m a huge fan of .338 lapua!
Me too!
Another cool video and a great caliber to hunt with
It’s an awesome cartridge, I want to take a long shot on an elk with this round.
Me too!
@@WHOTEEWHO will make an awesome video and an even better memory.
Get my Lapua RPR in one more week! Can't wait!
Sweeeeet
Good groups WTW I really like my .338 Lapua it will do some distance with a thump
On the topics of 338's, and because I know you're also a big fan of the 338WM, I thought I would mention the new 338 that just got SAAMI approval. I was checking on the specs on a Weatherby Mark V Hunter in 280AI and saw that Weatherby has released the 338RPM. I know the 6.5RPM is a screamer, not as fast as the 6.5x300, but the 6.5 RPM has intrigued me for awhile. I always thought there's something to it if Weatherby was willing to get away from it's iconic cartridge design. I've heard the 338RPM the ballistic twin the the 338WM, but I'm going to check out the numbers myself. Honestly, I'm hoping your mystery gun you can't tell us about until June is, in fact, a 338RPM. Also, if you can get your hands on one, I'd love to see how this 338LM compares to the Norma Magnums.
Excellent rig. Good stuff.
I love it
Had a 110 presicion hated it switched to 700 remington. And it shoots. 1 hole five shot groups at 200 yards with reloader 25 in 338 lapua
No it doesnt.
Saludos mi hermano después de mucho tiempo sin conectarme 😁acabo de comprar un .300 winmag, beretta 96a1 y una pistola cz p10 en calibre .380. Pronto subiré el review de estas armas acá en mexico donde están demasiado restringidas. Pero como soy militar en retiro tengo acceso a la compra.
Nice, Hog rifle.
Suggest that you do a 338lm in ballistic gel, 200 yards. That would be fun!
Love the video. Thanks man
I love the 338 Lapua
Me too
Savage Rifles shoot with the best out there.
I have the Savage 110 FCP in .338 Lapua. I like it, she'll beat you though. I haven't shot it much, ammo is crazy expensive for it. I got an SWFA 3-15x42mm FFP mil. For a budget target scope, I'm liking those SWFA scopes. The only draw back to them is lack of zero stop.
Love the SWFA scopes I have a fixed 10x. I made plastic shims on my lathe that go inside the turret that act as a zero stop, works great.
Chatanooga was great! I have 5 savage bolt guns and enjoy them all.
With total rifle support like you have couldn't you put your cross hair back on center after 1st shot then adjust scope to point of impact?
love it, its not just me who turns the scope the wrong way haha
I love my crimson trace for my ar 15 in 350 legend.
💪💪
That is sweet! I really want to try a long one like that.
Love to see you take it out to 1250 yards or beyond
👍👍
I got nipped by a damn 23 gauge pin that went directly left of the box I was making and straight into my index finger. I know your pain, brother. Make sure you don't mess with and lemons or gas for a bit. I swear, the tiny holes like that hurt the most. 😆🤙🏾
I really love your videos man 👌
Good Luck.
Thanks for watching!
I need a new rig. I was thinking of getting something on this end of the spectrum. I want to get something that is kinda a "standardized round". It looks like either 338 lapua or something in the 308 house for me, based on what ammo I can find on island.
Acredito que seja caça legalizada.mas é de cortar o coração essa imagem.
Went back to work, hate I missed the chat. Don't know how many I will catch but I'm gonna try.
Ok u got a sled shoot one the put cross hairs back on target then turn scope dials to the hole pretty much good to go
👍😊🎯 that’s sweet ammunition in it .
Very nice rig.
What a beast.
.338 is a beast!!!
I had to show my wife this video and try to explain to her I need one, then she heard you say it’s the most exspensive ammo you got haha
😝😝😝
Yay 🤩
Please 🙏 can U put the awesome statistics of the 30 Thompson which is basically a 308 creedmoor. It's not around cause they didn't bring up any good rifle's in that calibre.
reloading the 338