I really like your design. I'm sure it will fly wonderfully. I have only one concern. I'm not sure that you used a large enough fuel filter. Perhaps you can find a larger one to install.
Iya,.soal nya saya pernah ngalamin sinyal servo keganggu,om..trus magnet saya ganti yg kecil,koil sama spul nya..smpe sekarang aman walau jarak nya agak dekat..
I have no plan sir, just build with my own feelings. If you have question feel free to ask me. 😊 What kind of the balanced issue sir? Is it center of gravity?
It's a weed eater engine sir, in my country type model engine is BG3288. Probably that's code of 2stroke 32cc gasoline engine. U can use any similar type weed eater engine and then convert it to powered rc plane. 😊
Klo buatnya dari nol mungkin seharga motor matic second mas 😁 tapi saya pake remote dan servo, lipo battery dan yg lain2nya dari pesawat yg lama. Jd hrg nya bisa diteken di bwh 5jtan
Thank's for watching sir, propeller size 17x8 inch. I use homemade propeller adapter to conected. you can see others video on my channel how to build propeller adapter.
@@JenalAbidin-kk7gt ya harus bener dulu semua control nya om. Control standard.. rudder, elevator, aileron. Center of gravity jg harus pas, trs thrust nya dapet brp om ?
*_wao is awesome friend, congratulations a greetings_*
Thank you my friend, greetings 🤝
keren sampai antena yagi pun jadi korban demi proyek yang lebih besar lagi, semangat bro lanjutkan ...
Wkwkwkwk.. yoi bro, makasih ya support nya.
Mantap gan, moga sukses terus.
Makasi om, jgn lupa subrek ya 😁
mantap hasilnya...
Heheh.. makasih bro 😊
Itu pakai baling baling ukuran brp bang...
Ukuran propellernya 18x8 bang
Good
Thank you 😊
Very gooood Nice work
Thank you for watching sir 😊
keren mas, kalo bikin perahu bisa juga kali ya
Hahah.. blm kepikiran kesana gan, coba nanti klo byk yg request aku bikinin RC boat. 😁
Rasanya lebih mudah rc boat dibanding rc plane... Salute bro... Salam dari Borneo Malaysia.. We share same hobby
good job
Thank you 👍
I really like your design. I'm sure it will fly wonderfully. I have only one concern. I'm not sure that you used a large enough fuel filter. Perhaps you can find a larger one to install.
Thank you sir 😊
Servo throtle nggk keganggu radiasi pengapian yah,om..
Engga, agak jauh servo nya sekitar 70cm dari engine. Deket jg ga keganggu sih, cuma ngeri aja takut servonya trouble klo terlalu dkt.
Iya,.soal nya saya pernah ngalamin sinyal servo keganggu,om..trus magnet saya ganti yg kecil,koil sama spul nya..smpe sekarang aman walau jarak nya agak dekat..
Harus rajin di kontrol aja om,soal nya klo keganggu bakal ribet pas lg di atas 😅😅
@@firmansyahssfc tamat udah klo servo trouble 😂
Kasih part 2 aja,biar penonton nggk kecewa 😂😂😂
WHat kind of engine is it? Make and model, please. Thank you.
It's grass cutter engine sir, thank you for watching my video. Best regards
Om hanis brpa buat pesawat udh ama remot nya
Abis banyak om, udah ga keitung lagi deh. Dapet motor bebek satu kali om 😂
Did you connect the servo motor battery directly or did you use an ubec
I use an ubec bro 👍
@@MasboyRC
What is the amperage and voltage of U bec?
Bro😀
@@wmss8581 i use Hobbywing 5Amp ubec
ESC yg berapa itu mas
Pake UBEC om, klo mau pake ESC bisa yg 40 ampere
Very good
Thank you sir 😊
Mantap👍
Makasih gan 😊
Kapan bisa Maiden lagi om?
Sebentar lg, dsni ujan mulu. Landasan becek ga ada ojek 😂
@@MasboyRC ooh
Saya juga pengen Maiden om .tapi cuaca kurang bagus .anginnya kenceng
Iya, crosswind bisa ambyarrr
Hello Do you have the plans ? I have isues getting the plane balanced
I have no plan sir, just build with my own feelings. If you have question feel free to ask me. 😊
What kind of the balanced issue sir? Is it center of gravity?
Udh bisa terbang gk bos q???
Blm sempet gan, ujan mulu 😁
С большим удовольствием посмотрел как рождается самолёт!😊
спасибо за просмотр, надеюсь вам понравится. 😊
permisi suhu
Can i use 18×10 propeller for this plane
This engine suitable for 17" to 19" propeller size 👍
Can i use piper cub structure for this plane
Yes, sure. This structure can use for similar rc trainer plane.
Which of these two propellers is most suitable for this aircraft? 17x10 or 18x10
18 to 19 very suitable for this aircraft engine, but i'm prefered to use 18x10 prop. And also 17" still okay but need long runway to takeoff.
The wing and the tail alinement is quit a bit off I would be amazed if it flew that way.
Parabéns amigo, grupo MDR
Obrigado amigo
how much does the engine weigh?
This engine weight round 3kg sir
How many kilograms you can carry ?
Thrust 5,5kg but can carry 7kg to 8kg of weight, cause there is wingspan wide can give more lift. 😊
Mantap
Masih belum bisa terbang ini ma keliatan aja udah pda tau blum ckup stabil dri wing nya. Usaha lagi mas broo
And flight ?
Sure 😊
Does it really fly?
Plz tell mee 🙏🙏
Yes, sure. But crashed on maiden flight due to crosswind 😁
@@MasboyRC
😢🙄😂
Pesen sayap nya bsa gk bng?
Bisa tapi ribet ngirimnya bang, takut patah 😂
@@MasboyRC klo mesin adaa yg di jual bng?
@@MasboyRC klobikin model bongkar pasang bsa bng?
From what diaphragm carburator did you use?
I use walbro carburetor bro, i guess that's from chainsaw carburetor.
Berapa meter panjang sayap om.
2.2 meter om
@@MasboyRC pajang badan om,total berat berapa.
Panjang dari depan ke belakang 1.5m , total beratnya 5.5kg bensin full tank.
Banyak LG om,lebar sayap.mau belajar ne om.
Lebar sayap mksd nya chord nya ya gan? Klo chord nya 30cm. Hahah.. tonton aja videonya gan, ada keterangan nya disitu. 😂
Nice build! You would like to see my homemade 1/5 49cc RC Car!!
Thanks 😊
Wow, great job !
Thank you sir 😊
What is the wing length, propeller size, and engine size?
Wingspan length 2 meters, propeller size 18x8 and 2stroke 32cc engine.
How much is 18 x 8? What is the unit?
@@iraqi1447 propeller length 18 inchi, and the pitch is 8°
What a beautiful job!
Thank you sir 😊
Deu cg? Por que o trem de Pouso tão na frente ?
O CG está cerca de 30% da frewnte (leading edge), para evitar que o avião tombe durante o pouso. 😁
Buat ngatur gasnya pake apaan gan?
Pake servo gan, disambungin ke receiver.
Good job,what is the model of the engine?
It's a weed eater engine sir, in my country type model engine is BG3288. Probably that's code of 2stroke 32cc gasoline engine. U can use any similar type weed eater engine and then convert it to powered rc plane. 😊
@@MasboyRC Thank you,brother.I see.
You're welcome brother 👍
good job! this is just perfect!
Thank you sir, dont forget to subscribe 😊
Do you have diy step by step instruction(for newbies)?
Klw saya mau pesan... Brp an ya maz
Wah gak tau deh gan, habisnya byk soalnya. Mana bikin nya lama pula 😂
Yg udah2 sih sekitar 3-4jt an blm trmsk remot nya.
Bang coba dari mesin sengsor pemotong kayu yg gede bang
Oke bang, jgn lupa subrek ya 👍
@@MasboyRCapa subscribe, insya allah itumah gampang bang😀👍
Makasi byk bang 😁
suhu itu servo penarik tali gas apa namanya yh?? 🙏🙏,makasih sukses selalu 🙏
Itu servo MG996R gan, yg dipake buat narik tuas gasnya. Makasih juga, sukses selalu 😊
Plz make a video of flying this aircraft waiting so long
Go corona go 😖😷🙏🏻😖😷🙏🏻
Go healthy and stay safe bro 😁
How much did u spend on materials?
Arround $20 or something
@@MasboyRC awesome
Thank you my friend 😊
Where is the flying video...(it was fail)
Wait for the next time
@@MasboyRC Bullshit
Remote controler sama servo receiver nya berapa gan harga nya
Lupa gan, soalnya udah lama belinya. Heheh.. Klo ga salah sejutaan atau 1.2jt kyk nya gan. Klo skrng mungkin dah turun.
Olá! Projeto diferente! Gostei! Qual será o dia do vôo? Não deixe de registrar pra nós este momento, boa sorte!
Olá! Obrigado amigo. ainda compensa as muitas falhas nesse avião 😁
How many cubic meters does that engine have?😁
32cc m² engine sir 😊
Jesus atleast leave the clutch on it so you don't cut your hand off
mas boy klo lengkap berapa harganya bang,,saya dari jember
Klo buatnya dari nol mungkin seharga motor matic second mas 😁 tapi saya pake remote dan servo, lipo battery dan yg lain2nya dari pesawat yg lama. Jd hrg nya bisa diteken di bwh 5jtan
mas boy,ini nomer wa saya mas boy,salam kenal dari jember
Mas boy,ini nomer wa saya bisa,
Mesin nya 4 tak y bang
Bukan bang, ini 2tak 😊
Good work! What is the diameter of the prop and it's width? And how did you connect it?
Thank's for watching sir, propeller size 17x8 inch.
I use homemade propeller adapter to conected. you can see others video on my channel how to build propeller adapter.
@@MasboyRC Thank you! I saw your other videos. You say in comments you use 17x10 for 26cc engine. Why do you use smaller prop here?
@@alexanderarefev4744 oops.. sorry, i mean 17x10 inch. 😁
@@MasboyRC May I ask what the wing load is? Kg/m^2. Or what is the total weight and wing area?
@@alexanderarefev4744 wing span 2.2 meters and wing chord 30cm. I dunno how much exactly that wing load, maybe arround 500 to 700 grams.
Want to see this fly.....👍🏻
Keep stay tuned 😊
Assalamualaikum.itu panjang ama lebar berpa mas
Waalaikum salam. Itu panjang nya 1.4m trs lebarnya 2m. Gitu 😁
@@MasboyRC kalo propeller.a ukuran berapa mas
@@JenalAbidin-kk7gt propeller 17x10 kadang pake 18x10
@@MasboyRC mas.kalo mau kasi terbang.a gimana.saya udh tes bayak kali tapi gk mau naikpegaruh apyah kira"😀
@@JenalAbidin-kk7gt ya harus bener dulu semua control nya om. Control standard.. rudder, elevator, aileron. Center of gravity jg harus pas, trs thrust nya dapet brp om ?
Ukuran propeler brp mas
Propeller di mesin ini saya pake 18x8 bang
@@MasboyRC harga berapaan ya..
@@sitimakmuroh2100 propellernya aja 200rb an gan
🤗🤗
It did everything except fkying
Ws nya berapa om?
WS nya 2.2M om
Chord nya 30cm 😊
Karbu nya di ganti jadi karbu punya apa om?
@@diditcahyadwi pake karbu walbro punya chainsaw om.
Emang karbu bawaan nya kenapa om?
@@diditcahyadwi karbu bawaan nya model floating, ga bisa nyedot bensin klo posisi tangkinya lebih rendah dari karbu.
🤗
Unable to fly
Good build but it will not fly.
Thank's
Please till us why not.
ما هاذا المحرك
هذه جزازة العشب 😊
Fail
Never fail until you stop trying 😊
Then why you didn't try to fly the plane in open area
Very nice
Thank you my friend, don't forget to subscribe 😊
very nice
Thank you 😊