Exercise 66: How to make a 'Honeycomb Dome' in Solidworks 2018
HTML-код
- Опубликовано: 23 июн 2023
- Attend a free SOLIDWORKS workshop right here ➜
easycadsolutions--learnsolidw...
------------------------------------------------------------------------------------------------------------------------------------------------------------
@Easy CAD Solutions
In Exercise 66, you will learn how to create this beautiful-looking 'Honeycomb Dome' in Solidworks. After following this step-by-step video tutorial you will learn how to make uniform patterns on custom surfaces by using surfacing and feature commands in Solidworks.
And, also learned how to use the Wrap tool to project patterns on custom surfaces in order to achieve desirable results.
Important Commands Used:
-Fit Spline
-Revolve Boss/ Base
-Shell
-Move /Copy Body
-Split Line
-Offset Surface
-Thicken
-Fillet
-Chamfer
-Surface Flatten
-Fill Pattern
-Wrap
-Combine
-Extrude Cut
-Change Appearance
CAD File Link: grabcad.com/library/honeycomb...
Contact Info:(For My Freelance Service)
WhatsApp: +919793662583
Email ID: nishant13071992@gmail.com
LinkedIn: / nishant-gautam-86253a100
I love your channel. I'm a big fan. I also admire your attitude of sharing your knowledge. lending his time and affection to those who watch. Thank you very much. I wish you endless success🥲👉🤎
Thank you so much 😊
I am glad to hear this from my subscribers🤗
Wtf you really put the “easy” in easy cad solutions. Thank you so much!!!
Welcome 🤗
Very nice this lecture sir
Thank you, I try very hard for your lessons and they are pleasant and understandable to me, even if I don’t know your language (
Welcome 😊
I enjoy watchin your videos❤
Thank you 👍
your videos are very great and inspiring - could you divide the videos into chapters so that you can watch individual steps directly again without having to search for a long time.
Just a suggestion, maybe others will find it helpful too.
Thanks for your suggestion 👍
thank you very helpfull
Welcome 🤗
thanks AD
Welcome 🤗
Thanks
Welcome 🤗
Very weldon sir
Thanks 👍
Keren....trima kasih
Welcome 🤗
warping produce quite a big distortion at the base of the circle. if you aim for such result it is ok. If not, then I would just use one dome as a base, and cut out holes (honeycomb) in one circle pattern, along Z axis and pattern the cut along the Y axis. this would make the cuts same size. Of course the step gap has to be calculated (could be formula dependent on the radius).
Okay, I understand your point but it's not possible to make a honeycomb sphere or hemisphere with the same size of hexagons only, we also need some pentagons to adjust all the hexagons on a spherical surface
This is one of the best examples in a tutorial section, but certainly not the best in the solution. I am surprised that there is no feature in SW as to pattern points of the complex surface and Cut/Extrude Normal to surface a shape.. I mean you can do that while patterning along curve, but not along surface.
Sir , You are "The Master Of Un - Orthodox Design"
Thanks 👍
So I’m assuming this would work with your own custom sketches and splines on the surface if you wanted to rather than using a full pattern? Thanks for posted. I was singing to the piano music too
Yes, You can use any custom sketches with Wrap Tool in Solidworks
👍👍👍👍
🙏
Hello. I really like your channel and thank you for sharing. I'm also trying to learn Solidworks. I want to use Solidworks to draw a tent. But I don't know where to begin. Can you make a video sharing how to draw a tent in Solidworks? Please help me. Thank you so much!
I am glad to hear this
I will make a model for you
Kindly WhatsApp me at +919793662583
@@EasyCADSolutions I'm sorry but I can not register whatsapp. Do you use any other social networks? Skype, or hellotalk, or facebook?
Damn. Not possible with my ver 2015. It could not do the Convert Entities operation. I hate when this happens.
Yes, choosing an internal sketch option is not available in Solidworks 2015
I cannot do surface flatten, the command is greyed out!, any suggestions?
I think you are using Solidworks Professional
In the professional version some of the commands are greryed out
@@EasyCADSolutions Yes, I read the help and that's why.
Anyway I created a surface by calculating the area of the hemisphere, and drew a circle with that area and completed the model, problem solved, for now :) thank you.
On 8:00 a big question appears. We converted entities, and we exited the Sketch. And somehow on 8:04 we immediatelly appear with opened Wrap tool! Maybe you cut the video in this way, that you cut out moment when you press Wrap tool. I ask because this tool is problematic for me, it works when it wants, not when I want to use it, sometimes when I press wrap tool it does not even work. Very unusual one
No, I didn't cut this part of the video
I use wrap here as shown in the video
For more queries and suggestions contact me via WhatsApp +919793662583
We not gonna talk about the entire reflection of his house on the model??
What you want to say please elaborate?
@@EasyCADSolutions Your resolutions is so high you can see your house in the back??
The glare on the part shows windows and stuff, like a living room. Whose house is it?
Bro... can you PLEASE respond to me, seriously... I'm being nice rn
You can contact me via WhatsApp +919793662583
It's a reflection of the scene in Solidworks, it shows because i turn on the real view graphics