Will a 3D Printed Quarter Work in a Gumball Machine?
HTML-код
- Опубликовано: 19 авг 2024
- Will a 3d printed quarter work in a gumball machine? I do an experiment on my own gumball machines to see if it will work!
#gumballmachine #vendingmachine #experiment #shorts Развлечения
the last one has a weight spring keeping it from turning. just push down on the ‘quarter’ or use a slug. If you don’t know; a slug is the scrap metal leftover found at most metal work companies. They are often the exact size of a quarter and weigh the same. Will trick all quarter operating devices except 1990+ soda and arcade units that have magnets in the shoot to stop them. because real coins are not magnetic.
I tried a different kind of slug. Very messy!
Instructions unclear, the gumball machine is broken now and everyone is looking at me weird. 😂
@@robeaston4063 haha
Learning something new everyday...
You mean slag
$1000 in four minutes just to save $.25
Ya know some of us already have 3d printers for other things not just for this one specific application.
999.75 spent
BUT if used for actual spending, then he'd catch a charge for counterfeiting.
@@silvacadooYeah but the quarter is not gonna deplaete it.
Hey after 4,000 gumballs, it just free money.
Interesting experiment
We called them slug coins when I was putting them in arcade games in the 80"s
All you had to do was turn off the machine, and turn it back on, and it boots up with 2 or 3 free credits. Works on most games.
Called them slugs in the 90's as well.
Unc status
Yep. We used to use the hole punches from electrical boxes as slugs.
@@gir489returns2 lol, nice.
A felony for a gum ball
Yes if you was doing it on a public machine and not your own machine
Oh you're in for triple homicide? That's cool, I used a 3d printed quarter on a gumball machine
😅
Bro streaking a gumball 😂 a felony?
How is that a felony ? I do it too. Works on vending machines too.
@@theoverseerknowsall6619 it's counterfeiting if you try to use it
Plot twist, the 3D printed quarter costs .35 cents to make
Hey if it's only .35 cents that's less than a fiftieth the value of a quarter so it works out pretty well!
Only used like 3 cents of filament
@@Trashley652huh?
@@novanoob4849 If it was .35 dollars or 35 cents it would be more, but .35 cents is less
😂😂😂😂 right
So, you re-invented the wooden nickle
Much less effort required :D
But it's plastic lol
Lol I never knew that was a thing 😂
Mate when you're in the pub and desperate for a can of peanuts, you can just rip up a piece of coaster and it works fine.
Extra points for trimming it with scissors or a knife
I used to use a piece of folded cardboard as a kid works perfectly
No way pls explain
@@Ivannn252you fold a piece of cardboard behind the quarter then you get unlimited turns
@519sasuke that don't seem possible maybe in a SUPER og model but it would b way too thick I would think🤷🏼♀️
any video tutorial? im going somewhere where ther might be alot of gumball thingies
2 layers of Kleenex box glued together. Or so I’ve heard.
Once at Dollar Tree I found this flat piece of metal with a duck embossed in it that had fallen off of something. It was the perfect size, I put it in the machine and got the candy/gum (I forget which). I still wonder what the operstor must have thought when they saw that.
Probably like "damn another weird thing picked up off the ground that gives these kids a gumball..."
Sounds like you found one of our Canadian Loonies!
Your description fits perfectly!
This is so funny lol @@laurakruk4692
If I saw that I would be like "smart kid"
@@BloodmoonEDITZ Not me, if it was what I thought it was, I would have considered the conversion rate, and see if I could get a better deal for it elsewhere!
when a print from a 1000$ printer looks the same as a print from a 80$ one
I know right? Must have used a large layer size
The money you pay for more expensive printers is in reliability and customer service, not the functionality itself TBH.
@@moth.monster
>reliability
>customer service
*J. Jonah Jameson's laugh*
It's the speed that makes it so expensive. The ender 3 pro runs at 160mm/s and the Bambu Lab P1S runs at 1000mm/s and it comes fully preinstalled
An $80 printer would burn your house down + infinite migraines trying to get it to actually function
YES! Finally i can save my money by getting free gumballs, all it costs is a 3000 dollar machine i won't use for any other purpose except printing quarters
You just need to make 12,000 of them to pay it off (probably way more since I didn't put in the cost of the plastic)
Alternative title: how to steal things creatively
Thanks Mr moral
In the 80s, we used to use those plastic tabs that hold the loaf of bread closed.
That's brilliant! 😂
HaHa yup same here bub, worked every time. 👍🏻👍🏻😆
I Dftly miss the 80's 😎
I never thought to use an occlupanid!
Imagine finding one of these in a vending machine 😂
Or pressing the “return change” button and two of these pop out. 🤣🤣🤣
“When there’s no cops around, Anything’s legal!”
It's also legal when you own the gumball machines and they're in your own house.
Even murder
Fun fact: You can go to a local coin shop, look in the foreign junk box, and get foreign quarter-sized coins for 10 cents
Like a lot of them?
@@Loifey 10 cents each
So, you’re, in fact, creating counterfeit currency
Hope he likes the secret service
Don’t think this would count as counterfeit currency
@@ppsmaller1273 then what is it?
Unless you're purposely trying to pass it off as US currency, it's not counterfeit
@@anonymouspersonthefake a plastic chip it’s nothing like a real coin other than shape and size
Remember these are using mechanics rather than scanners, this wouldn't work in a vending machine
Seeing a youtuber you used to watch but stopped watching 8 years ago suddenly appear in your reels tab is a pretty surreal experience
Its an older machine but it checks out.
Return of the Jedi!
1983
Baldi: You did great come here to claim your prize a 3d printed quarter
bro has the ice cream scoop haircut
Spending 4000 quaters, just to save one? Sounds like a deal to me!
Stonks
I used to crush skittles to the size of a quarter and they worked pretty well
Its not about the ROI. Its about the candy eaten along the way.
How to go to jail in 5 mins for counterfeit coins.
So if I make coin shaped project is immediately counterfeit? Bullshit. He didn't do any crime. If he were to use this an actual public then yeah it would be a crime but this is his own home with his own machines and the coin he made doesn't work anything like an actual money coin that we use today.
Wear gloves when doing it then. No fingerprint makes it untraceable back to you
Props on the sprees hands down my favorite candy
...why?
Chewy Sprees are the best.
That last one just sounds like it doesnt work period 😂
Did he buy the vending machines with the candy already in them cause they look old af💀
Honestly I think so
I remember as a kid I saw a little cardboard circle about the size of a quarter sitting on the ground next to one of these candy machines. I put it in and it worked. My grandma was mad at me lol.
When I was a kid, I used to use pop can tabs in these machines. If you put it in there at the right angle, it will pass through.
Bro got the Enclave currency (fallout reference)
“It’s just a theory, a game theory” ahh voice☠️☠️☠️
11 days, 2 hours and 40 minutes to get your $1000 back 😂
Next try a 3D printed Chuck’E’Cheese token
Plot twist: those coins only get you 3D printed candy
Will the prosecutors listen to a cardboard cut out of saul goodman
I remember using plastic toy quarters to get candy from those candy machines as a kid 😂
Thank you Finally I can still gumballs😃😃😃
"how much for a gumball?"
"$1000."
Bro got that 2012 cut🤣💀
Single handedly collapsing the sticky hand and bouncy ball markets.
The amount of effort required to do this outweighs the 25¢ tenfold.
If you put any object that fits nicely it should work because the way a gumball machine works is there is a bendy piece of metal that pushes into the coin slot. If you put the coin on the metal gets pushed up by the coin amd the metal passes over the coin slot.
I heard from another commenter that it only lets certain weights in
I used to use the the toothbrush they gave us at the dentist to get an extra ball from the gum ball machines there 😂
It’s kind of ironic that your Dental Office ACTUALLY has a gum-ball machine!
Heck, I guess that’s ONE way to make you come back for more frequent appointments!
I used to visit an Orthodontist for my braces, and he was SO family friendly, that he ACTUALLY had a FULL SIZED unlimited play, pinball machine in his waiting room!
Ok, sometimes it was out of order so I couldn’t play! I mean, it was an older $.25 model! I think it was late eighties..?
However, sometimes when it was out of order, I STILL played!
The Receptionist and the Doctor himself would exceptionally let me, (depending on the issue) as long as I switched it off when I was done, and replaced the “Out of Order Sign” on top of the machine.
This way, the other patient (s) could NOT use it and make the issue worse!
"RUclipsr faces 30 year prison sentence after counterfeiting coins to steal from own gumball machine"
Seems like the last candy machine is the one you can trust lol
Coin
no not really. no coin
@@haidernaeemmalana8601:(
@@haidernaeemmalana8601 shot
yes coin
yes coin
I guess the question here is if you really save money 3D printing
You can save a lot, typically to print something this size, it is less than a penny so theoretically, you can print quarters and save several dollars on gumball machines for way less than $1
@@I_am_Dezwhat about the initial cost of the 3d printer
@@jarrenhackney5414well your not buying a 3dprinter just to do this
@@kilethekile1yes i am
Somebody call the secret service. 😂
Get 1000 of those, and you'll be swimming in free stuff.
The little cardboard circles that's left over from folding pizza boxes work also. The candy machines were removed from the pizza shop I worked at because of this
How much did it cost you to make the quarter?
Excellent question. How much did the first one cost and then how much will they cost once all the R&D is taken care of. Just simply the cost of material, and your time physically making... which hopefully includes a silver paint or something to alter the color so it is presumably useable in any situation.
Imagine going through all that trouble when a metal slug would work just fine.
It's more expensive to make 3d printed quarters in every way, but just pull a prank with a singular plastic quarter in the bunch of regular ones should be funny
Where a plastic coin fails, a gloved fist works perfectly.
I remember baiting an arcade machine at a skating rink by gently sliding in part of a tiny pink plastic ring I'd won there, before sliding it back out, and then in again. I got so many games off it, it was so funny
Lmao why did you really buy the bambu ? I really Hope not only for this 😂
yea hope he actually uses it, otherwise just get some cheap used ender. id love to be able to drop 1k for a bambu for beautiful prints.
Cheaper solution
Small pieces of metal
( knockout pieces of metal outlet boxes)
Back in the day my brother and i would go to the candy machine and there was a garden next to it and we figured out that if and made the woodchip the shape of a quarter we could use it for candy. Let me just say we had a bunch of candy
But it did work so 2/3? How does that work? You mean 3/3?
It didn't work on the third one, so 2/3. It only worked with a real quarter.
@@davester123 oh i thought he said it did
Not the sharpest tool are ya
@@kflive1 everyone makes mistakes?
Balls
That's wild. Won't be long until we seeing them in all kind of machines.
Back in the 90s, we would smash nickels with hammers into the size of a quarter and goto the arcade. Fun times
I admire your dedication to saving money.
That would be such an amazing parenting technique. Everytime they do something, like chores or something, you give them that instead of real money. Then let them save it or use it.
Love the BambuStudio part of this
We used to just use those old bottle cap liners with the ridge facing out. Worked like a charm
At our laundry mat when I was a kid, you could put just a penny in a gum machine and it'd work, it wasn't uncommon to find just a random penny laying around too, so it just made it better
Thanks for telling me how to steal 25 cents worth of gum from stores with those gumball machines!
I tried those plastic coins we used back in kindergarten to learn about currency, and it worked
You can make them pretty easy by sandwiching play dough between two quarters and trimming around them with a knife
When i was a kid, we cut pogs into the right size. They were a bit thicker, wouldn't fall out and could turn indefinitely
lol at the look of bewilderment on Mike's face as Walt continued talking and as for Gale, he's quirky and affable hence why he is so likeable but he's not a good guy and got involved in a dangerous game so his end was not totally uncalled for imo
Bro is starting his counterfeit bussiness
“Lock no gumball” my new attack name 😂
If I have kids I’m def using this as a reward system
When i was a kid i used to cut up cardboard with scizzors and while most of the time it just jammed the machine, one time it worked like magic!
my guy why are u admitting to fraud 😭
If you are an electrician. The 4 square knockouts used to work on soda machines.
Yes I use to take bendable key rings and put them in there and they would work just fine.
you did good on the 3D printer, having money, that's definitely one type i would've bought for myself... multi-material, fully automatic, enclosed, silent (hopefully) type...
The round circles that punch out of pizza boxes used to work.
Drake catching strays on a news report.
Brand new Gumball Machine have a Quarter Presser to test the coin to if its Real or not.
Always up to something
I forgot all about sprees. I freaking loved those as a kid
I remember in the movie Real Genius they took a bar of dry ice out of the freezer, cut a slice off of it with a wire, and used it in the vending machine.
Bro just committed counterfeiting
i could hear the gumball machine noises without hearing it
The majority of coin mechs test the material of the coin through magnetic properties
That’ll pay for itself in about 102 years😂
In the 80's we get the slugs out of electrical junction boxes. They were the same as the quarter.
Bruh you gonna make people became a villain
I used to fold peices of paper and put them in the machines to check free stuff
Why didn’t I think of 3D printing quarters for the toys machines 20 years ago when I was a kid??
I could’ve gotten so much cool stuff
I'd just pay .75 cents and move on with my day
I might have discovered that plastic chips used in BINGO used to work for dime gumball machines back in the 70's & 80's.
From wooden nickels to plastic quarters, the world keeps turning.
Best $1000 ever spent, you’re doing great kid
I literally use these machines as piggy banks. I fill them with my fav candy and then count the money every few months and put it in the bank.
bro just discovered the concept of counterfeiting.