So when I did the update on my dx5,I found out immediately that off road and wheelie mode are backwards. If you scroll down 1 screen you will c it say off road,street,and wheelie on the monitor screen.also,if you scroll down 1 more,that's your telemetry screen.go in there and you can set up all the telemetry. Motor and esc temp,rpm,mph,amp draw,battery voltage, all of it.other than the 2 modes being backwards, I like using my dx5 for the bike,for some reason,it feels more precise,plus the timer and telemetry is bonus.
@earlmoorhead5555 when I turn my radio on,it's set on off road first,the dx3 was always in the mode that you used last,and yes,I back flipped down the blacktop is when I figured that out! So I always check the mode first with the dx5.had to reprogram 8 models after that software update,but only my crawler was time consuming, all the rest are just 2 and 3 channel.
As a long time RC guy, I can sympathize with the wrong mode thing. It's easy to accidentally hit a switch, and in a lot of cases, the wrong mode screws the operator badly ( happened to me too many times ). That said, I would call it a successful test; 1/2 trigger is 70, there is room yet. Great job !!
Your running Good. I hate the hard feild work, but thats makes all the difference... Feel for you brother, have lots of days like this... Keep up the good work.
Does anyone make an extended swing arm for this bike yet? That may help keep the front tire down. Or maybe a wheelie bar set up? Extended swing arm would look better in my opinion.👍🤙💯
Your asking alot out out of a rc, that was capable of about 42mph. I'm sure the trans, pinion, drive train will take the 4s juice, if you pay attention to the slipper, and punch setting. In my opinion, put the supertune to tire/wheel balancing. Lower the front forks, heavy oil. (need to lower, reduce travel, and slow the reduced travel way down. Same with the rear monoshock. Lower the shock with a limiter inside, and limit the travel on the outside. Of course it won't be much good anywhere but the tarmac. Mine is set up for tarmac only too... sorry for the rant, but your data info is good. Thank you.
Damn Earl 70 with an electric brushless rc motorcycle holy shit !. My fastest rc car on four wheels was my Traxxas E-Revo mamba monster MXL-6S on 6S lipo 80.7 mph. For a dirt bike that’s been converted to an onroad setup isn’t bad at all !.
U can get steel gears from GPM .. the slipper clutch can either protect the plastic gears by slipping or simply tighten it way up and it will never slip
Nice job bro,been following your promoto build.. how is your front end holding up..are the forks getting sloppy compared to new..my forks are sloppy already. Feels like bushings are worn out already..keep on making good videos brother.. im just finishing editing a full Vitavon build series for the promoto. Great bikes!!👍👊😎
@@earlmoorhead5555 cool, I saw that you zip tied the servo saver. Good idea. I put the extra stock spring over the servo saver spring. It seemed to work good. I'll be installing the Vitavon servo saver and heavy-duty spring soon.
Real nice🎉 100mph earl is coming. 😂. Side note i use the dx5 pro for my bike the places of wheelie and off road had the wrong name on them i had to go in and swich the names around but on road is middle it seems
Not the knew jersey ….. at least it was just cosmetic damage ( which still sucks ) could of been worse those were pretty nasty crashes. Seems like it has plenty of power now it’s just a matter of it staying planted. I’m definitely impressed with what you’ve done with it so far
Like I said earlier there is a software glitch with the dx5 when it says wheelie mode its actually dirt so dirt mode is actually wheelie mode its backwards go down one screen it says what mode its in lol as soon s I hit enter you put it on the screen so you understand it now
@caperskyrc9278 help hold it straight ppl have ran no gyro with very little success but the control is way better with it on as the bike want to fall to the side no matter how fast you go
As u might recall E.... I'm always the one learning from you.... but I don't recall you using any weights on this model to keep its front wheel on the ground ..... especially with the speeds you're achieving..... just a thought ..... and as always...Thanx for sharing ......☮...I'm Out!!
@@earlmoorhead5555 Oh okay I didn't catch only being half trigger. So there's definitely more it there. And the traffic sucks. And it's a good thing that tumbly tumbly wobbly ride their didn't happen when the sheriff came by laughing my ass off. My daughter and I were laughing our asses off when that crash happened just crazy and then drove it back. Looking for the next vid 👍LMAOROTF
Hey on my smart ESC 150 I'm getting a green blinking light & ticking sound. Any thoughts... I did find a little rock down in where the wire goes into the ESC for the fan 🤔 & it will not go through the start up procedure the fan comes on but no throttle just steering
Un-plug fan see if it works if not rebind set end points during rebinding could be a shorted fan or lost binding end points also make sure throttle trim is zeroed out before turning radio and esc on
Here the video but rebinding is different on your esc you need to bind and calibrate esc and end points there’s many video on doing this as you have avc you need to bind calibrating all at once to complete it correctly
So when I did the update on my dx5,I found out immediately that off road and wheelie mode are backwards. If you scroll down
1 screen you will c it say off road,street,and wheelie on the monitor screen.also,if you scroll down 1 more,that's your telemetry screen.go in there and you can set up all the telemetry. Motor and esc temp,rpm,mph,amp draw,battery voltage, all of it.other than the 2 modes being backwards, I like using my dx5 for the bike,for some reason,it feels more precise,plus the timer and telemetry is bonus.
Yes a few had said something about it I just tested on 3s and it was good idk how it switched again
@earlmoorhead5555 when I turn my radio on,it's set on off road first,the dx3 was always in the mode that you used last,and yes,I back flipped down the blacktop is when I figured that out! So I always check the mode first with the dx5.had to reprogram 8 models after that software update,but only my crawler was time consuming, all the rest are just 2 and 3 channel.
You did a damn good job on that bike it looks like you just went in and just bought it out of the box right there🎉🎉🎉
Thanks 🙏
As a long time RC guy, I can sympathize with the wrong mode thing. It's easy to accidentally hit a switch, and in a lot of cases, the wrong mode screws the operator badly ( happened to me too many times ). That said, I would call it a successful test; 1/2 trigger is 70, there is room yet. Great job !!
Your running Good. I hate the hard feild work, but thats makes all the difference... Feel for you brother, have lots of days like this... Keep up the good work.
Thankfully I didn’t break it parts are still hard to find 😮
great job Earl your almost their
You are a beast dropping so many videos!!!
Definitely appreciate your support 💯🙏
Nice driving on that one lol, she rode a nose wheelie for a good while but you recovered like a pro. Keep it up im liking this.
Thanks
Heck of a build 💯💯💯 Nobody else can do it like you !!
Thanks 🙏
Wow that crash was crazy with the gyro trying to recover it.
Right had it flipping like a beached dolphin 🐬
Holy Chihuahua that was brutal. It took a beating & a good tumble. WOW
Does anyone make an extended swing arm for this bike yet? That may help keep the front tire down. Or maybe a wheelie bar set up? Extended swing arm would look better in my opinion.👍🤙💯
There's a couple 3d printed. Somebody made an aluminum one. Vitavon maybe
@@old-rcplane-phartyes vitavon made an aluminum one but I think it’s stock length, I’m sure if presented to vitavon they would make an extended one
Thanks for the joy Earl.Get that rider a beer on me.He took some Evel K Style falls on this run.✌️
Appreciate your support 💯🙏
Thanks! You are gonna need some more cash for those somersaults!
Love it, looking forward to more!
Appreciate your support 💯🙏
Thanks! Great video Earl
Appreciate your support 💯🙏
Great work so far! Awesome content. I’m thinking about joining you on the 100mph quest.
Appreciate your support 💯🙏
I'll give a credit my man, you've showed me just how much abuse the Losi MX. Outstanding Earl.
Thanks
Your asking alot out out of a rc, that was capable of about 42mph. I'm sure the trans, pinion, drive train will take the 4s juice, if you pay attention to the slipper, and punch setting. In my opinion, put the supertune to tire/wheel balancing. Lower the front forks, heavy oil. (need to lower, reduce travel, and slow the reduced travel way down. Same with the rear monoshock. Lower the shock with a limiter inside, and limit the travel on the outside. Of course it won't be much good anywhere but the tarmac. Mine is set up for tarmac only too... sorry for the rant, but your data info is good. Thank you.
Hey have anybody else noticed every time you play with RC the police show😅😮 you wouldn't believe how many time they happened to me 😞
Had that happen jumping the levie at the lake with my baja 5b!!! They kicked me out of the park Instantly!
Great stuff. Cant to see what's next.
Love the bike can't wait to see you break that speed barrier great job 🎉
I want to see a street bike version of this kit like a Ducati V4 etc
Damn Earl 70 with an electric brushless rc motorcycle holy shit !. My fastest rc car on four wheels was my Traxxas E-Revo mamba monster MXL-6S on 6S lipo 80.7 mph. For a dirt bike that’s been converted to an onroad setup isn’t bad at all !.
Thanks
U can get steel gears from GPM .. the slipper clutch can either protect the plastic gears by slipping or simply tighten it way up and it will never slip
Wow there’s plastic gears?
Still waiting on my order from June.
Yes I have another set just in case they strip
Oh man, this is getting wild! So fast!! 👍
Right will the aerodynamic hold in there to get that 100mph 🤷🏻♂️😯😜
GPM are making hardened steel gears ⚙️ for it good luck. I hope you can break 80. 🤞😎 🥃. thanks for the video & info
Nice job bro,been following your promoto build.. how is your front end holding up..are the forks getting sloppy compared to new..my forks are sloppy already. Feels like bushings are worn out already..keep on making good videos brother.. im just finishing editing a full Vitavon build series for the promoto. Great bikes!!👍👊😎
Just my servo saver got weak but a zip tie fixed that every thing else seems ok 👍
@@earlmoorhead5555 cool, I saw that you zip tied the servo saver. Good idea. I put the extra stock spring over the servo saver spring. It seemed to work good. I'll be installing the Vitavon servo saver and heavy-duty spring soon.
Thanks Bro, Loving the Speed Runs a lot 100 mph coming soon
Appreciate your support 💯🙏
Real nice🎉 100mph earl is coming. 😂. Side note i use the dx5 pro for my bike the places of wheelie and off road had the wrong name on them i had to go in and swich the names around but on road is middle it seems
Yes ppl been saying it in the comments 😮
Would be fun to get a group to set up a track around the Rose bowl parking lot and do some super moto racing. I see some of us are in socal. :)
Not the knew jersey ….. at least it was just cosmetic damage ( which still sucks ) could of been worse those were pretty nasty crashes. Seems like it has plenty of power now it’s just a matter of it staying planted. I’m definitely impressed with what you’ve done with it so far
Thanks
Str8 up NES excitebike crash right there! 😂😂😂
Watching now
Check your gyro I think it's fried it shouldn't take 3 minutes for the gyro to stop spinning
The drag brakes not set up on the new controller
Could having the guy on- going that fast or faster would make it lift more? Wind resistance/ drag/ its a difficult balancing act to achieve
Yes the urodynamics are a concern but I’m hopeful that like a real bike it’s stable from the sides like a knife cutting the wind 🤷🏻♂️
Like I said earlier there is a software glitch with the dx5 when it says wheelie mode its actually dirt so dirt mode is actually wheelie mode its backwards go down one screen it says what mode its in lol as soon s I hit enter you put it on the screen so you understand it now
If someone where to have parts that they would like to send your way, is there a P.O. Box or something else?
I will have a PO Box in a week 👍
Someone was speeding in that road, lol . 70 mph, I wonder how the sheriff would say about that lol
They’ve stopped and watched before
🍻
why didnt you order the metal gears?
gpm maks them.
Haven’t needed to and GPM didn’t call or tell me they had a slipper clutch ready yet 3 gears are plastic in there
GPM makes all 3 steel gears
Enjoying 🎉
You might have a chance by getting a front wheel motor pulling as much as it pushes in the back then maybe
Slow long pulls
Dude....kind of dangerous driving with traffic like that.....
Danger my middle name 💯
Thanks!
Appreciate your support on the video thanks 🙏 💯
is there a way to killswitch the gyro above I don't know 35/40mph
I can turn it off but it won’t slow down fast enough to stop takes over a min to stop
@@earlmoorhead5555 can you set drag brake on the gyro channel with your transmitter?
@@caperskyrc9278 yes but won’t stop fast enough in a run and slowing it down will cause a bad wiggle when running? Why?
@@earlmoorhead5555 I was thinking for speedrun in a straight line you don't necessarily need the gyro
@caperskyrc9278 help hold it straight ppl have ran no gyro with very little success but the control is way better with it on as the bike want to fall to the side no matter how fast you go
Wow alsome mate great video like the bike it's a nice one makes a change instead of rc cars all the time 😅😅😮😊
How bout a wheelie bar
If it needs one I will
😎💯💯💯
Wheelie bar and some construction cones to block the road off
Let'er Rip ✊️😁
As u might recall E.... I'm always the one learning from you.... but I don't recall you using any weights on this model to keep its front wheel on the ground ..... especially with the speeds you're achieving..... just a thought ..... and as always...Thanx for sharing ......☮...I'm Out!!
No weight just setting the gyro to cut on wheel lift
@@earlmoorhead5555 that’s why you’re Yoda and Im not..,..👍🏻
How Earl 😅 police come to whack the 4s running it might be popular 😅💯
Right lmao 🤣
Looking like October 15th for the UK bikes just heard
Nice
Earl Vitavon makes a stronger servo saver spring, just a FYI in case that would help you.
I think there's more in it I'd give it one more tooth on the pinion in my opinion.
I’m half trigger 🧐additional tooth on a pinion idk where it’s at now 🤷🏻♂️
@@earlmoorhead5555 Oh okay I didn't catch only being half trigger. So there's definitely more it there. And the traffic sucks. And it's a good thing that tumbly tumbly wobbly ride their didn't happen when the sheriff came by laughing my ass off. My daughter and I were laughing our asses off when that crash happened just crazy and then drove it back. Looking for the next vid 👍LMAOROTF
@glaanon4225 right the gyro had that thing flipping flopping all over the place lol 😂
@@earlmoorhead5555 yeah definitely a crazy ride LMAOROTF
Coming SOON: 6S!😊
Boom 🎉
70 on its arse isn't too bad.! 😉 😉
This is like trying to upgrade latrazzprerunner ain't happening ever
Was cringeing as it was flipping waiting for parts to cone flying off....yikes !
Appreciate your support 💯🙏
Ull never get eighty out of that toy
Lmfao
The scale isn't big enough doodooo
Seen this in your other videos no improvement t
Today was testing and the street tire never went 70 mph ? Battery low charge and half trigger no other video was this way?
Its a junk gimmick.
The factory Tx. worked good...
Hey on my smart ESC 150 I'm getting a green blinking light & ticking sound. Any thoughts... I did find a little rock down in where the wire goes into the ESC for the fan 🤔 & it will not go through the start up procedure the fan comes on but no throttle just steering
Un-plug fan see if it works if not rebind set end points during rebinding could be a shorted fan or lost binding end points also make sure throttle trim is zeroed out before turning radio and esc on
Got any ideas what up
I unplugged the fan & it still is blinking & making ticking sound & no start up
ruclips.net/video/i_EkU30vmB0/видео.htmlsi=tI112mEOmUag6k6T
Here the video but rebinding is different on your esc you need to bind and calibrate esc and end points there’s many video on doing this as you have avc you need to bind calibrating all at once to complete it correctly
Thanks!
Appreciate your support 🙏💯
Lmfao