Ich muss mich jedesmal wundern,mit welcher Ruhe diese Monteure an ihre Arbeit gehen.Egal was kaputt geht,sie bekommen alles wieder zum Laufen.Das wäre hier in Europa unvorstellbar.Hier werden nur noch Neuteile gegen Altteile getauscht.Reparieren hat man hier verlernt.Ich bewundere euch,klasse Arbeiter
@@udo5479 "... alles was Räder hat ohne Gnade überladen wird." Dafür gehen ja auch genügend Leute drauf bei Verkehrsunfällen in den Ländern da unten, aber das hört man hier bei uns nur, wenn mal wieder ein ganzer Zug in 'ne Schlucht gestürzt ist und es fünfhundert Tote auf einmal gibt. Aber selbst das interessiert bei der Geburtenrate in den Moslemländern nur wenige. Sind ja schnell ersetzt.
الباكستانيون لا يعجزهم شي ... ماشاء الله تبارك الله عمل وترهيم جبار فكيف لو طلب استيراد هذه القطعه من الوكاله سوف تكلف مبالغ كبيره جدا وهم يصنعونها بعشر ثمنها لو كانت من الوكاله ... اخوكم من السعوديه .
I don't know why they show how they make a part that is not for that model of tractor and then install the appropriate part that was clearly made in a true factory.
... some people do not understand the basics ... a tractor is supposed to pull the weight, not CARY it ... a single axis trailer ought not to be used as they are using it ... hence broken axels every time ...
Respekt for doing this urgent job at any time of the day or night. Here in the centre of Europe no one would do it - and if they would you could probably buy another tractor for the money they want ...
Yeah you always see it in places like this, it seems so dumb like obviously things are tougher economically for people in these places and yeah no doubt doing big loads makes more money per trip but wrecking your equipment would be a massive financial disaster for these guys, you'd think they'd be way more careful.
And in a few months they can do the job all over. Alloys of the metal and tempering has no control And marking the lug bolt holes as to drill by just eye balling the pattern. Not not using a mic
15:18 ЭЭЭЭЭ...... Тут другая деталь совсем!!!! Раз уж показываете процесс изготовления, то показывайте полностью с технологией закалки. А то, что на этом тайминге изображено, это совсем другая деталь, скорее всего завод, а не кустарщина!
Я думаю что на видео было просто показан типо производство там резба наружу как у т16 а у этого планетарный редуктор видимо решили видео увеличить просто ну понятно для чего😮
Great honest work...simplicity but amazing Just one niggle...when gear is press in, the entire weight is on the wheel hub studs. Definitely would be wiser to hsve a jig under where the studs sit into and the flat surfaces take the pressure pushing down.
Parabens aos trabalhadores e mecanicos muito dedicados em seu pais ...pena os usuarios das maquinas caregarem.demais as maquinas . .aqui sul do brasil terenoa muito mais tortuosos trabalhamos com respeito aos limites decas maquinas e temos tratores em operacao a 40 anos
They ignore the fact that a tractor is not a truck. They call a tractor "truck" but a tractor is not a truck. A TRACTOR IS NOT A TRUCK! A TRACTOR IS A TRACTOR! They are intended for fields works. I think they are just a little bit ignorants on that fact. I suggest them to buy an armored tank, so they can overload it very heavily without any problem.
the part they made isn't the part they put on this tractor they like to pretend they are making the parts, but the part isn't made in Pakistan massy Fergueson parts aren't made in a little shop in Pakistan and this isn't a copy of it either
they iinsist on overworking their equipment to the point of constantly breaking.is why there ALLWAYS repairing it.& why they will ALLWAYS own GARBAGE EQUIPMENT.
Dar asel milat tractor walon naa Massey Ferguson mee reet he buhat dale ha kisan bachara be keya kera jedher dil kera toot jata ha 50 sal purane technology khaber kachra Pakistani kisan ko beach raha ha yaa ba gherat Massey Ferguson wala allah pak gherk kera in ko aameen suma aameen
If this accident happen in Australian,shit would of hit the fan,work cover and all government agencies would had a field day,the list of thing you could pick up from video,make me laugh,in Australian most work place have half day school about safety,in Australian we have gone over board with safety,as no one want to take responsibility for there own actions.
Ich muss mich jedesmal wundern,mit welcher Ruhe diese Monteure an ihre Arbeit gehen.Egal was kaputt geht,sie bekommen alles wieder zum Laufen.Das wäre hier in Europa unvorstellbar.Hier werden nur noch Neuteile gegen Altteile getauscht.Reparieren hat man hier verlernt.Ich bewundere euch,klasse Arbeiter
Die haben auch immer gut zu tun,weil alles was Räder hat ohne Gnade überladen wird.
@@udo5479 "... alles was Räder hat ohne Gnade überladen wird."
Dafür gehen ja auch genügend Leute drauf bei Verkehrsunfällen in den Ländern da unten, aber das hört man hier bei uns nur, wenn mal wieder ein ganzer Zug in 'ne Schlucht gestürzt ist und es fünfhundert Tote auf einmal gibt. Aber selbst das interessiert bei der Geburtenrate in den Moslemländern nur wenige. Sind ja schnell ersetzt.
تسلم أياديكم على هذا العمل الجبار ابداع وإتقان بالعمل نتمنى لكم الموفقيه شكرا
الباكستانيون لا يعجزهم شي ... ماشاء الله تبارك الله عمل وترهيم جبار فكيف لو طلب استيراد هذه القطعه من الوكاله سوف تكلف مبالغ كبيره جدا وهم يصنعونها بعشر ثمنها لو كانت من الوكاله ... اخوكم من السعوديه .
These workers have an excellent work ethic and look!!! not a cell phone in sight!
I don't know why they show how they make a part that is not for that model of tractor and then install the appropriate part that was clearly made in a true factory.
Huh
@@Guillotines_For_Globalists the part in the lathe has a smooth face while the mounted part has stamped numbers
... some people do not understand the basics ... a tractor is supposed to pull the weight, not CARY it ... a single axis trailer ought not to be used as they are using it ... hence broken axels every time ...
Respekt for doing this urgent job at any time of the day or night. Here in the centre of Europe no one would do it - and if they would you could probably buy another tractor for the money they want ...
And with limited tools no advance tools this is Pakistan
Lol....in center europe we dont overload tractors like these...hah
And these is probably 500€ Max Job ...lol
ماشاءالله تبارك الله تحياتي لكم من برشلونة 🇲🇦🇲🇦🇪🇬
why do they insist on overloading vehicles?..
So they can fix them after they break job security
Probably get paid by the pound/kilo…..
Yeah you always see it in places like this, it seems so dumb like obviously things are tougher economically for people in these places and yeah no doubt doing big loads makes more money per trip but wrecking your equipment would be a massive financial disaster for these guys, you'd think they'd be way more careful.
It’s not overloaded. It is just full.😂
These aren't accidents. This is the inevitable result of severe overloading.
This video is very misleading. The part that they show being manufactured is not the same part that was installed on the tractor.
بسم الله ماشاء الله تبارك الرحمن☝🏻
جزاكم الله خير وبارك الله فيكم🤲🏻
Helo people!
Good job!
Congratulations from Brazil!
😂😂😅
her traktörun bir gücü var.1gr dahi akil olsa böyle kaza olmaz.
ماشاء اللہ تبارک اللہ ۔۔۔ دل خوش ہوگیا میرے بھائیوں کا ہنر دیکھ کر۔اللہ پاک سے دعا ہے کے خوب عطا کرے۔۔۔۔🌹🌷🌺👍💐🏵️💪👊🤲🤲🤲🤲
Parabéns pelo trabalho
السلام علیکم ماشاءاللہ اللہ آپ کو اور عمران خان صاحب کو سلامت رکھے علی حق ❤❤❤❤❤
An excellent job!
good job and quick getting this tractor back and working👍👍👍
And in a few months they can do the job all over.
Alloys of the metal and tempering has no control
And marking the lug bolt holes as to drill by just eye balling the pattern. Not not using a mic
Good 👍very good quality 👍
15:18 ЭЭЭЭЭ...... Тут другая деталь совсем!!!! Раз уж показываете процесс изготовления, то показывайте полностью с технологией закалки. А то, что на этом тайминге изображено, это совсем другая деталь, скорее всего завод, а не кустарщина!
oszukańce xD to co wytoczyli dłuższe było, robienie pojedynczo części zawsze wychodzi 10x drożej niż by w sklepie kupił
Я думаю что на видео было просто показан типо производство там резба наружу как у т16 а у этого планетарный редуктор видимо решили видео увеличить просто ну понятно для чего😮
Oczekujesz od muzułmanów prawdy?, to prawie jak od Putina.
@@wojtas-4 я думаю уже не совсем уместно вплетать в диалог лидера моей страны!.......
Se desvaran rapido
Tienen toda la maquinaria asu dispocision
Exelente.....👍🏾
A Pakistani tractor broke a rear axle shaft? Impossible, they always take such great care with them and never overload them....
Essa mesmo trator foi bastante vendido aqui no Brasil a mais de 30 anos atrás ,o que é diferente a gente vai na loja e compra ja pronto só amontar
Hand made the parts for tractors ?? There is not quality control, are pieces disposable
How much effort would it take to put a pan under that oil leak?
They give backt the oil where it is originally coming from.
EU GOSTO DE VER ESSES PORQUE SÃO UMAS PESSOAS QUE TRABALHA MUITO É SÃO MUITO INTELIGENTE E HUMILDE À SI O BRASILEIRO FOCE ASSIM
To dlaczego? dosłownie gdzie nie spojrzeć !, są zawaleni śmieciami, brudem, dziadostwem ... , CZŁOWIEKU NIE MASZ POJĘCIA JAK INNI MAJĄ I PRACUJĄ!
Hello i'm present and support for you ❤️🎉💖❤️🤔
They all look so happy. 😂
Amazing video
Great honest work...simplicity but amazing
Just one niggle...when gear is press in, the entire weight is on the wheel hub studs. Definitely would be wiser to hsve a jig under where the studs sit into and the flat surfaces take the pressure pushing down.
They supported it in the center, not by the studs. You missed that.
Parabens aos trabalhadores e mecanicos muito dedicados em seu pais ...pena os usuarios das maquinas caregarem.demais as maquinas . .aqui sul do brasil terenoa muito mais tortuosos trabalhamos com respeito aos limites decas maquinas e temos tratores em operacao a 40 anos
Siete molto bravi
Герметик старый даже не счистили с поверхности, халтурщики😂😂😂
Even big big Iron give up because of the overkill loads.
Overload, breakdown, happily repair, get money, that's how they earn their livelihood.
Obviously not caring how much wgt they can do. Beyond it's capacity
أللهم صل على محمد وعلى اله وصحبه وسلم
They ignore the fact that a tractor is not a truck.
They call a tractor "truck" but a tractor is not a truck.
A TRACTOR IS NOT A TRUCK!
A TRACTOR IS A TRACTOR!
They are intended for fields works.
I think they are just a little bit ignorants on that fact.
I suggest them to buy an armored tank, so they can overload it very heavily without any problem.
им и дали трактор и они его угрохали и так же точно они угрохают танк.
Allah Pak Hum Sab Ko Har Haadse Sey Bachye Ameen Allah Ap Ko Or Taraqi Yafta Karen Ameen
Maybe if they used common sense they wouldn't have to depend on Allah.
Respect, amazing work 👍
You must respect the authorized load so that no malfunction occurs
those men work hard.
That M.F. 385 was a nice tractor until the operator screwed it up.
The axle thay put in the housing wasnt the axle thay made the flang end wasn machined all the way across and it had writing on the center
Steering wheel was likely bent from before this accident.
The great thing is, tractors are repaired very quickly and you make your own spare parts 👍👍
the part they made isn't the part they put on this tractor they like to pretend they are making the parts, but the part isn't made in Pakistan massy Fergueson parts aren't made in a little shop in Pakistan and this isn't a copy of it either
How can a trailer load of sticks weigh so much, probably should move trailer axle forward a bit.......
In America if you left that load on the side of the road, you'd be robbed blind by both Government Officials and the thugs too.
they iinsist on overworking their equipment to the point of constantly breaking.is why there ALLWAYS repairing it.& why they will ALLWAYS own GARBAGE EQUIPMENT.
Pregunta , sale más barato volver a armar el camión 🚛 que llevar una carga en su camión 🚛 2;3;4 veces más pesado que el camión 🚛 que tiene ?🤔🤔🤔🤔🤔🤔🤔🤔
Parabéns aos irmãos ai.
السلام علیکم بھائی ماشاءاللہ بہت محنت کا کام ہے ویڈیو بنا نا اللہ تعالٰی آپ کے کام میں برکت عطا فرمائے آمین
... 2:23 Axle Oil at the grounds ... unbelievable 😐
Don't they have laws about weight limit in Pakistan?
To laugh or to cry 😅😮... what to realy say 🤔
they got themjob done, the tractor willl run and produce again.....so whats the issue your ilk was born to cry
They worked very well, but why are they so filthy?
I'd rather use a harbor freight jack stand then trust those bricks
Even a tatty old block of wood would be safer
Should not put weight on the tractor at all
That’s an active road with all that crap there?
whats the one thing that stays the same,,,,,,,,,, yes the black oil, the only time it's new is when it comes out of the factory.
Non vi fa male la schiena lavorare per terra
Living in a garbage dump!
Good thing they have no DOT cops over there
At least it’s Universal, one guy working three standing around thinking they look important
А масло в мост долить не надо?
يا صديق ما فيه زيادة حموله بعدين خرابيه ٥ طن بس
Así me gusta el aceite al suelo
انتم بشر غير طبيعين بتحملو احمال اكثر من المكرر للالي
Dar asel milat tractor walon naa Massey Ferguson mee reet he buhat dale ha kisan bachara be keya kera jedher dil kera toot jata ha 50 sal purane technology khaber kachra Pakistani kisan ko beach raha ha yaa ba gherat Massey Ferguson wala allah pak gherk kera in ko aameen suma aameen
Gupta shits his pants !
... excellent skills ... 😐
Scusate ma voi lavorate senza bancone?
no such thing, as overloading. every rupees count 👍
Синей изолентой надо было замотать
😂😂😂 se a roto porque lleva poco peso
y el aceite perdido?
I can't believe the amount of trash in the streets.
You’ll own nothing and you’ll be happy. Coming to your country.
70 t not yes 30 t respect machine
Бедная техника, сколько земли в редуктор попало
Here's to the hydraulic jacks that lift some gigantic weights.
❤❤❤❤❤
stupidity or greed
This filmed in 1978
Omala yazık size yazıktır traktöre yazık
Scary that guys hand inches away from.a huge press ,pounding away at hot metal....such small tongs used.
إذا حرام شغل زي كذى فين تروح حمله تحميل مزرعه مره واحده
Tôi đã thất vọng chiếc máy kéo này rất
Nó tệ quá
Nó tốt như tôi đã nghĩ
Trabalho meia boca , montarám o redutor do trator com muita terra , não é assim.
If this accident happen in Australian,shit would of hit the fan,work cover and all government agencies would had a field day,the list of thing you could pick up from video,make me laugh,in Australian most work place have half day school about safety,in Australian we have gone over board with safety,as no one want to take responsibility for there own actions.
Xu gi nghèo qa. Xe chút xíu keo cả đống. Mang nguoi như cỏ rác
That’s things happen when you put too much weight risk own life destroy tractor
мусор смел в средину и нормально
+
Dorabiali piastę koła , której ostatecznie nie założyli, KOLEINY FILM OSZUSTWO!
最后还是需要淬火,保证硬度
Im guessing thats a high wear item there
ทำไมไม่เอาน้ำหนักถ่วงด้านหน้ารถด้วยล่ะครับ
Все поломки автотранспорта из за вашей патологической жадности
В следующем видео, тот же самый дедушка-жадина опять сломал трактор))))
Bhai wts app nmbr send kijye ga