How To configure a used PCM on a 2017 Ford Escape With the Maxisys Ultra
HTML-код
- Опубликовано: 5 авг 2023
- "🔍 Dive deep with us as we unravel the intricacies of configuring a used PCM on a 2017 Ford Escape using the Maxisys Ultra. Whether you're a seasoned mechanic 🔧 or just starting out 🚀, this guide will provide invaluable insights and step-by-step instructions to ensure a smooth process. 📖 Don't miss out on this essential tutorial for all Ford enthusiasts 🚗 and professionals!
🔥 Want the best tool strategy and direct support? Head over to auteltech.co.za and book your diagnostic tool consultation today! 💼👨🔧"
thank you😍
Nice 👍
im608 can do that without FJDS...
I had to work with what the client had which was the Maxisys Ultra
❤
I need the dealership access 😅😅😅😅 how can I get one????
Do I need to download the fjds and will it cost money for any subscription or anything
Right now the subscription is 50 usd for 72 hours. When the subscription ends you will need to pay again. If you want I charge 200 USD for the installation with training and a free Ford Service information account to check the procedures.
Curtis, How can you tell if the Autel tool is made in USA ?
Hey Chris, I don't know because I only take responsibility for the tools I sell. All I can tell you if you want certainty I can sell it to you directly or if you want to take the risk you can find out after you purchase from your seller.
all devices from china in this world.
So how do I contact you when using my Autel ms-919 for help and what’s the cost for this ?
Hello. Usually what I do is do an initial consultation first to find out your inferences, Then ill give you a proposal that will solve those inefficiencies. You can book the diagnostic tool consultation at my website so I can assess you . Auteltech.co.za
Hi can we make this procedure with im 608??
It really depends on the system. The function will be there so you can give it try but if it doesnt work you need to use the FJDS with access credentials.
@@AutelConsultancy thanks for your answer
Hi Chris, I am in Canada so how do you get a locksmith license?
HI Chis, why do you need one? Alot of my clients dont have and they still get results.
@@AutelConsultancy Because you have said you cannot do it without a locksmith license. I don't have friends to give me the authority so I would have to get a license. I am a small independent. I often get people with key problems. I have a maxi Sys Ultra. Just last week a guys son lost the only key while they were at the gas station. It happens, a lot of people here only have one key. I advise everybody to get at least one more key. It is a big problem with modern cars.
@@akdenyer Hello, I understand. I dont know your situation in details as I would need to consult you to find out the vehicles you get in your shop that need key coding but even if you had a locksmith license , your tool is limited in its key coding functionality . Out of a scale of 1 to 5, I will give the key coding a 2.5 overall. If you just want to add keys to the system you can do this up to vehicle around 2014 but anything over you probably might no have that functionality and you wont be able to do any all keys lost. You could invest in a dedicated key coding tool from Autel as it will compliment your tool in the key coding coverage . And it doesnt require a locksmith license to use. On rare occasions like if you replace a BCM or Immo system on a ford and you need to gain security access you can book a diagnostic tool consultation with me for 97 usd and I can do it with you. If I sell you a tool and you need this services its 40 USD. Many of my clients who are in the auto repair business dont have locksmith licenses but since they have the right tool strategy and training they dont need to acquire one
@@AutelConsultancy Hi Chris, I can certainly buy the tool. I bought the maxi sys ultra through Napa here in Canada. I have two cars to do. A Dodge Journey 2011. And another car. I will get the details. But what is the problem in getting a license? I have a business and am a red seal licensed motor technician. The other car is a 2007 Ram Charger.
@@akdenyer Well there is 2 things. I have customers in Canada but I haven't investigated the process of getting a locksmith license in that region just because they never needed it to get the job done. Also it can be really expensive and alot of red tape you got to go through to get it with yearly fees. But again it depends on your local polices. What you can do is contact Napa with that information and see what they advise. Otherwise if you want a professional recommendation as well as my support you can book a diagnostic tool consultation on my website auteltech.co.za . Hope this helps
Hi, can I configure a used Mercedes PCM with Autel MaxiSYS Elite ll pro?
Unfortunately not. if you would like to show you how to do this you can book a diagnostic tool consultation with me and ill be able to give you the right tool strategy that will solve this problem and fit your budget. Go to autetech.co.za and book the dtc service
Thanks for your reply, the link is not working
Go to auteltech.co.za and click the diagnostic tool consultation
Good morning how are you I'm joining you I want to ask you about the I'm508 use this one to give this machine j2534
Curtis hardin How can i get a dealership Access and password to login,,, please help 🙏
book the j2534 training on website. Ill be able to assist you then. Thanks
Okay
Thanks So much
So we basically need to know someone to hook us up
Or you can just get a locksmith license. Then you can do it yourself
How can someone get a locksmith access to program the pcm
Where exactly is the pcm?
It varies on the year make and model
So the reason why you can’t do the reset because your not using an IM608 only the im608 can do immo like this I own the 608s2 and did a module 2017 ford f150
Please I need a dealership access,,, How can I get the password
Please how to register to Ford to gain passwords to login,,,, response needs