Nahi aap dusre internet pe connected pc ko ping nahi kar sakte, ek hi condition me ye possible hai agar aap dono jagah MPLS connection use kar rahe ho to aap wanha connected local network devices ko ping kar sakte ho.
@@TECHNETWORXX toh fir ye kaise possible hota hai k main ek domain server administrator kr rha hu ek location pe aur mera office different cities me hai to main chahta hu k mere office me jitne v client pc hai wo saare merr domain se connect ho jaye Ky aisa kr sakte hai
Hi Vegad Dharmesh, During a ping test, tells that the ping request from our computer cannot find the route to the destination IP address. It means the packet sent from your computer reached the destination network successfully but the remote gateway failed to find the destination host. So the remote gateway sends an Echo message “Destination host unreachable“.
Check your cable connectivity, check IP address on both network device, disable firewall, ping the correct IP, jyadatar inhi karan se ye error aate hai.
Hi, i hope this will help you to understand better.."TTL is a mechanism to avoid L3 loops, basically it would set the value of the number of hops the ip packet would go through the network path before being dropped. Each router along the path would decrements TTL value by one and sends it towards the next hop router, instead if the TTL value is zero the router will dropped it and it will send an ICMP message back to the original ip address informing that the packet has expired in the transit, and at that point the packet would be removed from the network. The decrementing would also happen if a router is forced to store the ip packet in its memory for a period of time more than one second, in that case for each one second the router would decrement the TTL value by one, I've never verified that theory in practice. In the back days the TTL value was measuring by time not by hops, as the name Time To Live implies, it was the maximum number of seconds that the ip packet was allowed to remain on the network, but with the evolution of today's routers, it would very less likely that a packet would last more than one second before being forwarded, so the rule had changed against the original one"
Very nice explain sir 🙏🙏🙏
Very Informative
Thanks for sharing!
Very informative video brother keep it up👍
Thank you
host a to host b ka ping high aa rha hai to kya kare ?
giga switch also installed
Thanks sir
Mai nay Kai bar DNS Change kea. ab DNS Lookup Bahot time Lay raha.
Bhai TTL LOOP, Khatam ho nay may kitna Time Lag ta hai ???
good
Thank you for upload this video
Your welcome
@@TECHNETWORXX bhai apse mujhe bat krni h call par kuch kya ap kar sakte ho
You can ask me your query here also.
excellent information sir. thank you.
Very important must be to a video. thanks.
Glad you think so!
Smart pss software add ip address or switch connetevity pls tell me
Please explain your query properly. Based on that i can try to help you.
agar hume IP Address pata na ho hume kaise pata chalega ki us System ka IP Address yeah hai
Open command window and type ipconfig
Isse aapko system ki IP pata chal jayegi.
Ky hum ek jagah se baith k kisi doosre city me internet se connecTed pc ki IP ko ping kr sakte hai? Agar ha toh please explain
Nahi aap dusre internet pe connected pc ko ping nahi kar sakte, ek hi condition me ye possible hai agar aap dono jagah MPLS connection use kar rahe ho to aap wanha connected local network devices ko ping kar sakte ho.
@@TECHNETWORXX toh fir ye kaise possible hota hai k main ek domain server administrator kr rha hu ek location pe aur mera office different cities me hai to main chahta hu k mere office me jitne v client pc hai wo saare merr domain se connect ho jaye
Ky aisa kr sakte hai
Aapko dono office me MPLS connection lagwana hoga.
@@TECHNETWORXX koi doosra rasta like VPN or something else?
Agar aapke user stable hai to MPLS is best, VPN is used for continue relocating users. VPN case me aapko firewall purchase to karna hi padega.
appreciated
Or samjha tha
Aapne ye nahi bataya ki agar humara computer Wi-Fi se connected hai Fir bhi net nahi Chal raha hai to ping kaise kare
Aap computer WiFi se connect ho ya LAN se ping ka concept har jagah same hi rahega.
Destination net unreachable ka kya matlab he?
Hi Vegad Dharmesh,
During a ping test, tells that the ping request from our computer cannot find the route to the destination IP address.
It means the packet sent from your computer reached the destination network successfully but the remote gateway failed to find the destination host. So the remote gateway sends an Echo message “Destination host unreachable“.
@@TECHNETWORXX ok Thank you
@@TECHNETWORXX Another point of this is that the IP address you have entered is not available or not feed in any host device.
.
mujhe IR3225 se Scan Karna hai
Nahi ho pa raha hai samajh nahi aa raha hai
PING: transmit failed. General failure. what is meaning of this error
Ap kaha se ho bhai
Delhi
Copy ke time kitna ping hona chahiya
I hope you are talking about copy data from one PC to other PC. Thats depends upon traffic on network. If traffic is high ping will be high also.
@@TECHNETWORXX yes, ping getting 100ms 300ms when i copy data between 2 pc(direct connected)
Please help...🙏🙏
IP ping hote time last me TTL-64 & TTL-128 show krta h..?
iss dono me kya mtlab h jabki same PC me ping krte h..!
TTL stands for Time To Live, the maximum number of seconds that a packet is allowed to be on the Internet before it is destroyed as undeliverable.
Not ping cmd problam please solution
What is the problem plz explain?
un reachable or time out error ko solve kaise kare
Check your cable connectivity, check IP address on both network device, disable firewall, ping the correct IP, jyadatar inhi karan se ye error aate hai.
Expired in transit ye kya hai
Ping Kay hota hai
Not clear TTL
Time to live (TTL) refers to the amount of time or hops that a packet is set to exist inside a network before being discarded by a router.
Hi
Hello
Are u explaining in respect to linux
Windows, but other than small change in syntax everything remain same.
TTL is not explained well
Hi, i hope this will help you to understand better.."TTL is a mechanism to avoid L3 loops, basically it would set the value of the number of hops the ip packet would go through the network path before being dropped. Each router along the path would decrements TTL value by one and sends it towards the next hop router, instead if the TTL value is zero the router will dropped it and it will send an ICMP message back to the original ip address informing that the packet has expired in the transit, and at that point the packet would be removed from the network. The decrementing would also happen if a router is forced to store the ip packet in its memory for a period of time more than one second, in that case for each one second the router would decrement the TTL value by one, I've never verified that theory in practice. In the back days the TTL value was measuring by time not by hops, as the name Time To Live implies, it was the maximum number of seconds that the ip packet was allowed to remain on the network, but with the evolution of today's routers, it would very less likely that a packet would last more than one second before being forwarded, so the rule had changed against the original one"
@@TECHNETWORXX thanks for the reply
@@Albin143able Always welcome
If we send 10000 bytes
Like ping -l 10000 192.168.1.1 -t
Now what is the speed in network
You are increasing load on network, definitely network speed will reduce.
Now speed will depends upon you network structure 10/100, 10/100/1000
sorry bro wrong info
You can share correct info, so that i can upload in next video
Very important must be to a video. thanks.
Glad you think so!