NS 200 Slipper Clutch Long-Term Review: Do You Really Need It? Unveiling the Truth! | Vlog #03:Uncut

Поделиться
HTML-код
  • Опубликовано: 5 янв 2025

Комментарии • 86

  • @rezlatech4486
    @rezlatech4486 11 месяцев назад +11

    Was eagerly waiting for this video….i have ordered the slipper clutch unit and the 200ns hub yesterday and was worried if something might go wrong….but now im free of such thoughts….thanx a lot bud

    • @adarshbhuskat
      @adarshbhuskat 11 месяцев назад +1

      From where did you order plz specify or give a link

    • @KunchiKiran
      @KunchiKiran 10 месяцев назад

      ​@@adarshbhuskat99rpm

    • @Arabmallu_yt
      @Arabmallu_yt 8 месяцев назад +1

      N250 clutch assembly you buys.??

    • @rezlatech4486
      @rezlatech4486 7 месяцев назад

      @@Arabmallu_yt yes

    • @mahinm6475
      @mahinm6475 5 месяцев назад +1

      Hi bro..
      Is your bike bs4 model?
      Did you feel any below difference in gear shifting after installing the slipper clutch?
      1- slickness in gear engagement?
      2- delay in gear engagement?
      3- throttling delay after rolling movement to throttling?
      4- Loose clutch cables after installation?

  • @Dashport-ih7ww
    @Dashport-ih7ww 8 месяцев назад +3

    Not all hero's wear cape !
    Thanks for the video

  • @KayBee1064
    @KayBee1064 10 месяцев назад +4

    In a 150 cc bike can the stock 5-gear set be replaced by a 6-gear assembly for smoother top end speed ?
    I'ld highly appreciate if you could pls throw some light on this modification.
    Thanks

  • @anuragmaity6572
    @anuragmaity6572 11 месяцев назад +1

    My dear ….
    Can we install judder plate or named as master plate install in n250 slipper clutch if ….we install there will 5 clutch plate instead of 4 …is this help judder plate …or if we install judder there will any issue ??? Plz rply 🙏🙏🙏

  • @pks_phenix
    @pks_phenix 6 месяцев назад +2

    Hi Brother I wanted to inform that I've been using n250 slipper clutch on my rs200 for few months. Now the the problem is the its slipping at higher rev range. So am moving back to 6 plates stock clutch assembly.

    • @asarahmaf9771
      @asarahmaf9771 Месяц назад +1

      You sure about this that slippers clutch is causing you the problem ?

  • @mahinm6475
    @mahinm6475 5 месяцев назад +1

    Hi bro..
    Did you feel any below difference in gear shifting after installing the slipper clutch?
    1- slickness in gear engagement?
    2- delay in gear engagement?
    3- throttling delay after rolling movement to throttling?
    4- Loose clutch cables after installation?

  • @gnrhkyfj
    @gnrhkyfj 11 месяцев назад

    thanks for making long term use of slippper clutch

  • @foodsfor_thought
    @foodsfor_thought 10 месяцев назад

    How about the wear and tear? Is it more than the stock or the same?

  • @akashdixit17
    @akashdixit17 11 месяцев назад

    Nice bro....very informative 💯

  • @jeshwamera1783
    @jeshwamera1783 3 месяца назад

    Can u give the link for anti jutter plates or its part number bro?

  • @NS_Rider_9646
    @NS_Rider_9646 11 месяцев назад +1

    Nice video, Bro please make detailed video on parts like clutch case and availability ❤

  • @shahriarfaisal69
    @shahriarfaisal69 2 месяца назад

    can i put n250's slipper clutch in N160?

  • @nikhildhurve4278
    @nikhildhurve4278 11 месяцев назад

    Bro I’m staying at Bommanahalli, I want to change my swing arm on my ns200 .
    Do you know any one can help me for changing it ?
    Please help. 🙏

  • @RSourav_Dey_SINCE_1998
    @RSourav_Dey_SINCE_1998 11 месяцев назад

    🙄 Brother how to import video's in HDR is there any software? Because in your videos even 144p showing HDR and Quality was soo good in 360p HDR like normal 480p

  • @ranger4770
    @ranger4770 10 месяцев назад

    what is the product name of that gear indicator

  • @govindbishnoi5051
    @govindbishnoi5051 11 месяцев назад +1

    Bro a complete video on ns 200 carboreter tunning details video

  • @Snazees
    @Snazees 11 месяцев назад

    Bro, can we install n250 clutch unit in n160? Is it going to be direct fit?

  • @abhiee4574
    @abhiee4574 4 месяца назад

    Bro what about engine braking?

  • @Ultimateajit
    @Ultimateajit 11 месяцев назад

    Your video is very much helpfull thanks

  • @samarpoudel9499
    @samarpoudel9499 11 месяцев назад

    ARKIONX Brother can we add duke 200 bs4 ehxust muffer on ns 200 is it possible . After adding can we get the sound like duke on ns .

  • @idrisquadri
    @idrisquadri 11 месяцев назад +1

    Hey brother,loved your videos,is it compatible with 200ns Bs3?

  • @niranjanrc6736
    @niranjanrc6736 11 месяцев назад

    What happened to the dominar mirrors?

  • @D1PAYAN
    @D1PAYAN 11 месяцев назад

    Ns200 BS3 light switch on ns200 BS4. Would love a video on this.

  • @DCBVlogs-ll7hf
    @DCBVlogs-ll7hf 11 месяцев назад

    What is the price of sleeper clutch and from where I can buy it.

  • @Ultimateajit
    @Ultimateajit 11 месяцев назад

    You and me are same location can i know where i can change normal to slipper clutch for my Rs200 give mechanics shop or details please

  • @sivakondiparthy2074
    @sivakondiparthy2074 11 месяцев назад

    Bro from where did you sourced allen bolts and nuts for duke handle bar

    • @ARKIONX
      @ARKIONX  11 месяцев назад +1

      From Bajaj bro, part number : LAC00111

    • @sivakondiparthy2074
      @sivakondiparthy2074 11 месяцев назад

      @@ARKIONX thanks man

  • @kartikdhandhukiya6570
    @kartikdhandhukiya6570 11 месяцев назад +1

    carb tuning vedio plz

  • @siddharthashrestha4599
    @siddharthashrestha4599 11 месяцев назад

    Hi brother can we use N250 slipper clutch on N160? Will there be any fitting issue?

    • @ARKIONX
      @ARKIONX  11 месяцев назад

      Hi bro!
      Unfortunately you cannot install in N160.

    • @sivaramareddyk
      @sivaramareddyk 11 месяцев назад

      Same question and why bro?​@@ARKIONX

    • @ninjax5397
      @ninjax5397 11 месяцев назад

      ​@@sivaramareddykmaybe because of different housing, both engine are too different

  • @Brahmangamer_
    @Brahmangamer_ 11 месяцев назад +1

    Sleeper clutch bike is push to start like battery issue

  • @amodrayamajhi1081
    @amodrayamajhi1081 11 месяцев назад

    I have the new NS200 BS7, It's been just 7.5K KMs. Eventually, when the time comes, I'm going to follow your instructions.
    But IDK if I would be able to buy it without the basket as you instructed in your previous video.

    • @rezlatech4486
      @rezlatech4486 11 месяцев назад

      You don’t need the basket since its a new bike…

    • @amodrayamajhi1081
      @amodrayamajhi1081 11 месяцев назад

      yes, honestly I don't need anything right now LOL. And I wouldn't need the basket too in the future if I install the slipper clutch. But everything else except the N250 basket would be required. @@rezlatech4486

  • @pyscho6868
    @pyscho6868 11 месяцев назад

    Hii bro ,my 2023 ns 200 completed 2nd service yesterday...the showroom service didn't reset the service remainder km...I don't know how to reset the km...there is no vdo for 2023 ns in RUclips...pls reply

    • @rezlatech4486
      @rezlatech4486 11 месяцев назад +1

      Hold the mode button when bike is off and turn on the key/switch….wait till the spanner icon disappears

    • @pyscho6868
      @pyscho6868 11 месяцев назад

      @@rezlatech4486 tried it brw... The km changes to 45000 and then I don't know how to set it.. tried different methods it is not changing

  • @h1z1survivor
    @h1z1survivor 11 месяцев назад

    Bro, the tachometer of my ns200 shakes a lot after 7k RPM? I've taken it to SVC, they were like 'it has vibrations, and it can't be fixed… doesn't matter even if you get it changed'. Do you have any solution about this? 😶

    • @rezlatech4486
      @rezlatech4486 11 месяцев назад

      Use rubber washers where the headlight assembly is mounted on the bike chassis….this will solve the issue

    • @h1z1survivor
      @h1z1survivor 11 месяцев назад

      @@rezlatech4486 Alright! I'll try this out. Thanks

    • @movieshubtop5301
      @movieshubtop5301 11 месяцев назад

      ​@@h1z1survivorCan you please update after you try bro ?

    • @h1z1survivor
      @h1z1survivor 11 месяцев назад

      @@movieshubtop5301 I'll make sure to make an update here. 😄

  • @python885
    @python885 8 месяцев назад

    Mene or mere frnd ne apke video ko dekhkar NS200 me n250 ka clutch install kiya or me bas ye bata raha hu clutch bohot zada smooth ho gaya hai

  • @infamousrider_vr46
    @infamousrider_vr46 11 месяцев назад

    Hey. Can you let me know which clutch & break levers you are using???

  • @soumalyadas5556
    @soumalyadas5556 7 месяцев назад

    Do you need to change the clutch cable?

    • @ARKIONX
      @ARKIONX  7 месяцев назад

      Not necessary if it’s in good shape.

  • @pavan6520
    @pavan6520 8 месяцев назад

    Does this fit in AS200 pulsar bs3?

  • @namanucscan3455
    @namanucscan3455 10 месяцев назад

    Can i use this on my duke 200 bs6 model?

    • @ARKIONX
      @ARKIONX  10 месяцев назад +1

      Yes 🙌🏻

  • @rijubhowmick2438
    @rijubhowmick2438 11 месяцев назад

    Can I install slipper clutch in pulsar 220

  • @Koushi.B
    @Koushi.B 11 месяцев назад

    Can i do install slipper clutch Ns 200 BS6 Bike ?

  • @pavan6520
    @pavan6520 8 месяцев назад

    People say 20w40 for liquid cooled and oil cooled engine bcoz it's thinner and these engines have less oil flow spaces.... While 20w50 is for air cooled engines which is more viscous and thick made for engines that allow bigger space for the oil flow.........So can I used 20w50 after installing slipper clutch in bs3 ns200?

    • @bossheth420
      @bossheth420 7 месяцев назад

      i have a carbureted ns200,ive been using 20-50,when i used 20-40 engine seems to be hotter than im used to and its kind of scary hot

    • @pavan6520
      @pavan6520 7 месяцев назад

      @@bossheth420 Did you install slipper clutch?

  • @Avgeek4nine
    @Avgeek4nine 11 месяцев назад +1

    I say you should also do daily observation videos😅❤

  • @DirectorBalaji
    @DirectorBalaji 11 месяцев назад +1

    Installation of dominar headlight in ns 200 video bro

  • @Ultimateajit
    @Ultimateajit 11 месяцев назад

    Bro i found one thing end of video your taking chandapura bridge left side its my apartment Nisarga is there. what a co incident

  • @AdityaEnergySolutions
    @AdityaEnergySolutions 9 месяцев назад

    Avenger 220 me lag jaayegi kya?

  • @Weekend_rider_1
    @Weekend_rider_1 11 месяцев назад

    Is it compatible for bs6 NS200?

    • @ARKIONX
      @ARKIONX  11 месяцев назад

      Yes bro , it is compatible

  • @sudipdas8066
    @sudipdas8066 5 месяцев назад

    Bro make a video on usd modification on Ns200

  • @Heisenberg8307
    @Heisenberg8307 9 месяцев назад +1

    I bought NS200 bs6 phase 1 in 2021, done 14000km. The power is insane for a 199cc bike, it's explosive power delivery is addictive, even gixxer 250 couldn't gap me in winding hilly roads. My brother now bought this new ns200 2024, when i test drove, even after riding aggressively, it lacks the explosiveness of ns200 2021. Now i realize i will not sell my NS200 and i want to install slipper clutch in it. Will it bring down the explosive power delivery of my NS200?

    • @ARKIONX
      @ARKIONX  9 месяцев назад +2

      Hey 👋🏻,
      Installing slipper clutch will not have any difference in terms of performance of your bike.

    • @Heisenberg8307
      @Heisenberg8307 9 месяцев назад

      @@ARKIONX thank you. Appreciate it.

  • @varunmurali6367
    @varunmurali6367 8 месяцев назад

    The current bs6 model has slipper clutch.

  • @rajanraja813
    @rajanraja813 11 месяцев назад

    Bro Bs7 ns160 😔😔😔

  • @ityo8718
    @ityo8718 11 месяцев назад

    Can we install it on normal pulsar engins? Like 150-180-200-125 etc

    • @ARKIONX
      @ARKIONX  11 месяцев назад

      Unfortunately no bro

  • @Kyroz220
    @Kyroz220 3 месяца назад

    This