I wish you had the part, taking off the plastic behind the seat. Ive only seen one video and the guy broke those clips so im still not sure how to do it 😂
I don’t know how it is with cbr’s but if you get your bike flashed it could cause a low rpm stutter if you leave the servo buddy connected as it did with my zx10r 2023
🤔 ok good to know thanks 👍 I plan on getting it flashed and dyno tuned at the end of April I will keep that in mind. Did it go away after you unplugged it?
@@321maxtorque yes and it was driving me crazy I Dynoed and the low rpm stutter was still there erased the Dyno and reverted to stock and flashed still their then simply removed the servo buddy and the stutter left
@@2025.yamaha.R1 wow that is nuts!! I’m glad you found out what it was 👍 it is stuff like that is good to know it can save people so much time and stress lol thanks again!
And if you just take the wires out and leave the servo in there you don't need a buddy I left mine in so the bike still thinks it's doing its job I see alot of the tt race guys using the exhaust that you have very nice
Great choice 👌 sc it's good but I went with something different too and my zx10r sounds amazing for $600 sounds just as good as my buddies $1200 exhaust
@@xaviermorman3830 yes they are to clips that I used a small pick tool to slide up on the flat side it will pop up mine fell and I had to go hunt for it lol then when I put it back on I used a flat head screwdriver with tape on it and pressed it into place I’m sure there has got to be an easier way but that is how I did it.. hope that helps 👍
Well I think that any sportbike is not going to be great for long rides, that being said this bike is more aggressive than most so I wouldn’t recommend it for long rides. I would go with a hayabusa if I wanted to do a long ride personally.
No it does not. It is only a slip on, getting a tune is ideal but I wanted the “noise” now lol!!! I plan on going to Chris Moore at the end of April for a full dyno 👍
Thanks! Seating is aggressive, but I wouldn’t say uncomfortable. Compared to my 1000RR you notice the difference when going from bike to bike. It is something that is easy to get used to in my opinion. 👍
Sir my question is a bought a full Akra Evo for my RRR it cost around $2,500. I’m sorta regretting not getting the full Arrow Evo system. Do you think if I just swapped out the cans it wouldn’t make a difference? I can’t justify paying another 2k for the full Evo system.
I believe you could switch out the can.. but I have not heard the akro in person to know if there would be a difference my guess is the tone may be different but I’m not sure. The slip on arrow is about $700
@@321maxtorque Okay thanks for the reply I guess I’m worried the Akra won’t be loud enough, I’ll definitely wait until I install it to give my opinion on it. I’m a fan of my bikes being a bit on the louder side.
@@321maxtorqueApparently Arrow doesn’t make Titanium Headers for our bike which is disappointing. Do you think it matter going with Stainless instead of Ti headers? Still have the full Akra system waiting to be installed but I bought the same Arrow slip on you have in meantime.
To put a slipon a Honda triple R You don’t have to remove fenders..i’m going to repeat myself to the slow people in the back of the class when you buy a slip on for a Honda triple r , you do not have to remove any fenders And when you go to Motomillion they have the servo, buddy…… when I order it last year, it toke three day's
No it is a separate purchase unfortunately about $60 but I recommend getting it if you put an exhaust on any bike to keep from throwing codes unless you have it flashed then they can program the fault code out 👍
Damn that thing is a BEAST! I currently ride a 600rr and I love my bike but the pirate bike is my dream machine. Ride safe brother
great job man
Sounds nice ride safe
I wish you had the part, taking off the plastic behind the seat. Ive only seen one video and the guy broke those clips so im still not sure how to do it 😂
Very nice man 👌🏼
best Exhaust
Dope ❤ Arrow exhaust
My dreambike.. fireblade
I don’t know how it is with cbr’s but if you get your bike flashed it could cause a low rpm stutter if you leave the servo buddy connected as it did with my zx10r 2023
🤔 ok good to know thanks 👍 I plan on getting it flashed and dyno tuned at the end of April I will keep that in mind. Did it go away after you unplugged it?
@@321maxtorque yes and it was driving me crazy I Dynoed and the low rpm stutter was still there erased the Dyno and reverted to stock and flashed still their then simply removed the servo buddy and the stutter left
@@2025.yamaha.R1 wow that is nuts!! I’m glad you found out what it was 👍 it is stuff like that is good to know it can save people so much time and stress lol thanks again!
And if you just take the wires out and leave the servo in there you don't need a buddy I left mine in so the bike still thinks it's doing its job I see alot of the tt race guys using the exhaust that you have very nice
Dream bike
Great choice 👌 sc it's good but I went with something different too and my zx10r sounds amazing for $600 sounds just as good as my buddies $1200 exhaust
Akrapovic Exhaust From WSBK, is the Best Exhaust for Honda CBR 1000 RR-R FIREBLADE SP.
No. The evolution or racing line is enough. To use the wsbk exhaust u need the wsbk headwork done or the air volume isn't enough to utilise it
Bad ass bike too
Hey man how’d you get that middle white fairing off? The piece where you enter the key part? I seem to be stuck on those 2 black pieces
@@xaviermorman3830 yes they are to clips that I used a small pick tool to slide up on the flat side it will pop up mine fell and I had to go hunt for it lol then when I put it back on I used a flat head screwdriver with tape on it and pressed it into place I’m sure there has got to be an easier way but that is how I did it.. hope that helps 👍
What about its ergonomics,is it ok to drive it for long rides or not that comfortable?
And which super sport is comfortable for long rides?
Well I think that any sportbike is not going to be great for long rides, that being said this bike is more aggressive than most so I wouldn’t recommend it for long rides. I would go with a hayabusa if I wanted to do a long ride personally.
So this doesn't require ECU remapping of any sort right??
sounds amazing..
I was always fan of Yoshi but Arrow rocks
No it does not. It is only a slip on, getting a tune is ideal but I wanted the “noise” now lol!!! I plan on going to Chris Moore at the end of April for a full dyno 👍
She sounds awesome. Hows the seating posture. I hear Honda are just about as comfortable as the gsxr. It sportbike terms i'm talking!
Thanks! Seating is aggressive, but I wouldn’t say uncomfortable. Compared to my 1000RR you notice the difference when going from bike to bike. It is something that is easy to get used to in my opinion. 👍
@@321maxtorque -Yes i sat on a 1000rr and it wasn't bad at all. So basically the RR is a little more comfortable than the RR-R?
@@antownemercer7552 yes! The foot pegs are a little higher on the RR-R
Sounds good!!!
Where did you order it from?
I can’t find it anywhere
A local shop called GP bikes in Melbourne Florida 👍
Any more videos of pipe sound?
How you liking it so far?
Thanks man
@@luisdorantes5549 I absolutely love this exhaust and I am going to make a video this week I will put some more exhaust clips in it 👍
@@321maxtorque I can't decide between the Arrow or SC....Thanks
@@luisdorantes5549 you can’t really go wrong with either. 👍
Sir my question is a bought a full Akra Evo for my RRR it cost around $2,500. I’m sorta regretting not getting the full Arrow Evo system. Do you think if I just swapped out the cans it wouldn’t make a difference? I can’t justify paying another 2k for the full Evo system.
I believe you could switch out the can.. but I have not heard the akro in person to know if there would be a difference my guess is the tone may be different but I’m not sure. The slip on arrow is about $700
@@321maxtorque Okay thanks for the reply I guess I’m worried the Akra won’t be loud enough, I’ll definitely wait until I install it to give my opinion on it. I’m a fan of my bikes being a bit on the louder side.
@@coltonconroy1384 I think it will be good 👍 but I would like to hear your opinion after your install.
@@321maxtorqueApparently Arrow doesn’t make Titanium Headers for our bike which is disappointing. Do you think it matter going with Stainless instead of Ti headers? Still have the full Akra system waiting to be installed but I bought the same Arrow slip on you have in meantime.
@@coltonconroy1384 I believe they do make a full titanium system check out this link www.arrow.it/en/assembled/1712/Honda-CBR-1000-RR-R-2020
Do you plan on getting a tune?
Sure do!! Plan on taking it to Chris Moore to have it dyno tuned.. soon hopefully
@321maxtorque that's great can't wait to see that video. Beautiful bike.
What camera is this??
This is the DJI Osmo pocket 3 with no color grading! I actually love this camera lol
Do you get any trouble with the servo ? Can you ride without anything going wrong with the bike ?
No trouble at all!! Also no codes have been thrown. Works perfect 👍
Awesome 😊, I have the 2021 cbr1000rr-r in red still with stock exhaust, but now I'm gonna get same exhaust as yours 😊, thanks for your videos
To put a slipon a Honda triple R You don’t have to remove fenders..i’m going to repeat myself to the slow people in the back of the class when you buy a slip on for a Honda triple r , you do not have to remove any fenders
And when you go to Motomillion they have the servo, buddy…… when I order it last year, it toke three day's
Did you have to buy the servo get around plug in unit (no idea what it's called) or did it come in the kit from Arrow??
No it is a separate purchase unfortunately about $60 but I recommend getting it if you put an exhaust on any bike to keep from throwing codes unless you have it flashed then they can program the fault code out 👍
@@321maxtorque oh OK thanks, would you mind letting me know here you got it from?
@@scottdean1563 I got it from a shop local to me in Melbourne Florida they can get everything!! (321) 253-0334