I did this job on my 3.0 last month. I dropped the transmission and did it with the engine still on. I had the workshop manual which helped a lot but not as much as your video. Sir, you are a true master. Thank you so much!!!
Thank you so much brother you help me alot🙏 But my question is what can i use to lock camshaft and crankshaft position if i don't have timing tool set?
This engine timing chain is located at the back so you have to turn the harmonic balancer clockwise to check for timing marks is correct???? Well explained bro keep it up 👍👍👍
Hello Mr. Hanish, it is exactly how i did explain it in this video, when turning the engine from front at the fun's drive belt is located, turning to the right in the same time if looking to the back of the engine timing will be turning to the left and all chain tensionners are located to work with this engine to turn to the left because timing chain are located at the back of the engine, so when working on this engine to set the timing chain at the back of the engine you can not turn it to the Right from the Flywheel !!! put if you are turning the engine from the front of the engine at the harmonic balancer , you can turn the engine to the Right Because the timing chain at the back of the engine will be turning to the left and the tensionners are working in the Correct way and the chain will not Jump. i know you will Understand what i mean, Because you are a Smart Man, and i like your Comments.
I did use a Plastic cup that's came with a new water pump connected with cable to the engine for safety, and safety glasses must be used , this is my way to test engine compression.
If I’m just pulling the heads off can I bring the engine to TDC and put in the cam locks and the crank lock bolt before removing the cam pulleys? Is this the correct way
Thanks for the Nice Comment, i am from Australia , Thanks For Watching, & Have a Nice Day. You Can Watch part 1 of this Video its about how to remove timing chain for Audi Q7 V6 Supercharged Engine, its very important to watch before start working on engine like this one.
I did this job on my 3.0 last month. I dropped the transmission and did it with the engine still on. I had the workshop manual which helped a lot but not as much as your video. Sir, you are a true master. Thank you so much!!!
Thanks for the nice comment 👍
simple explanation, clear, and to the point, thank you for this!
Glad it was helpful!
Great video, so You have a step by step for audi q7 2013 engine timing chain procedure. Thank You!
You are very welcome to watch my mechanic videos on my RUclips channel.
Good job man (ما شاء الله) I live in Canada and drive a 2019 Q7 🇨🇦👌 nice work.
So cool! ما شاء الله جميل جدا .
شكرا
That compression test trick was awesome. Thank you
Glad you liked it!
SO CLEAR AND SIMPLE EXPLANATION
Thanks for that! 👍 ❤️ Thanks for watching and thanks for your comment.
Brother u help me a lot thank you so much ! Inshallah tomorrow I can do the job well and correctly thank you
Best of Luck inshaa Allah. Always Remember Safety First
You make it look so easy
Thanks for Watching , have a Nice Day.
Thank you so much brother you help me alot🙏
But my question is what can i use to lock camshaft and crankshaft position if i don't have timing tool set?
Thanks for watching.
Great work sir 👍👍👍👌
So nice of you, Thanks For Watching.
Very clear simple video
Glad you think so!
Brother you amazing 🙏
Thanks for the nice comment 👍
Great job brother. What are the special tools used for timing?
Engine timing Tool
Nice video brother Thankyou,
You are Very Welcome. You Can Watch My Videos on My Channel Any Time, Thanks For Watching. Have a Nice Weekend.
What timing kit you using?
MashAllah very nice brother! Good job. Keep up the good work.
Thanks for watching.
This engine timing chain is located at the back so you have to turn the harmonic balancer clockwise to check for timing marks is correct???? Well explained bro keep it up 👍👍👍
Hello Mr. Hanish, it is exactly how i did explain it in this video, when turning the engine from front at the fun's drive belt is located, turning to the right in the same time if looking to the back of the engine timing will be turning to the left and all chain tensionners are located to work with this engine to turn to the left because timing chain are located at the back of the engine, so when working on this engine to set the timing chain at the back of the engine you can not turn it to the Right from the Flywheel !!! put if you are turning the engine from the front of the engine at the harmonic balancer , you can turn the engine to the Right Because the timing chain at the back of the engine will be turning to the left and the tensionners are working in the Correct way and the chain will not Jump. i know you will Understand what i mean, Because you are a Smart Man, and i like your Comments.
@@HachemHActivity thank you Mr hachem you are the best mechanic 👌👍❤️
Hi Hachem, masyaAllah, tabarakallah.
Thanks for watching and thanks for your nice comment 👍❤️
Hello Hachem, is the timming mark same as 4.2 fsi
We are going to learn a lot from you.
Thanks For Your Super Nice Comment.
Hola, de casualidad me podrían facilitar los torques de culata de ese motor. Gracias
What tool set would you use for this?
Nice Video brother
Watch the video again. 🤔
I like uncle 💖💖
Thanks for watching.
Can you replace a head gasket without removing the motor on a 2017 Audi Q7 ?
not sure. 🤔
What did you use to plug the holes for the compression test?
I did use a Plastic cup that's came with a new water pump connected with cable to the engine for safety, and safety glasses must be used , this is my way to test engine compression.
Thanks very much!
You're welcome to Watch My Videos on My Channel, Enjoy & Learn and Have a Nice Day.
If I’m just pulling the heads off can I bring the engine to TDC and put in the cam locks and the crank lock bolt before removing the cam pulleys? Is this the correct way
Watch the videos again part: 1 and 2
Wish you were in New York 👍🏽
Thanks for Watching.
What would have if you accidentally turn the crankshaft counterclockwise?
If turning the engine to the wrong direction, engine timing may jump to wrong position
What did you use to check compression
Good boss 👍
Many many thanks.
Thanks for watching and thanks for your nice comment 👍❤️
impressed thank you
Glad you liked it!
من اي بلد عمي ماشاء الله عليك
Are those parts u used original or after market
Thanks for watching.
How much would this job cost on a 2012 A6 c7 3.0T?
Not sure.
Thanks for watching and thanks for your nice comment 👍❤️
what if the cams bar code doesnt face up when i have the timing tool on
Watch the video again. 🤔
Is piston 1 at TDC ?
Watch the video again. 🤔
Love you bro where are you from
Thanks for the Nice Comment, i am from Australia , Thanks For Watching, & Have a Nice Day. You Can Watch part 1 of this Video its about how to remove timing chain for Audi Q7 V6 Supercharged Engine,
its very important to watch before start working on engine like this one.
Thanks boss.
You are Very welcome, i am Very Happy That You Do visit My Channel To Watch My Videos and Enjoy Watching.
Thanks you mr
what year is this audi q7?
not sure. 🤔
I am a automobile mechanic
Good luck
I need job
Good luck