Gtek170R - 04 Regulator Maintenance
HTML-код
- Опубликовано: 15 сен 2024
- Regulator Maintenance
Jack Wood demonstrates how to maintain the Gtek170R inline regulator.
Don't forget to register your Planet Eclipse paintball marker(s) to validate it/them for warranty purposes at the following address:
planeteclipse....
For more support please visit the following link or contact us on the e-mails below:
Eclipse Manuals/ Product support:
planeteclipse....
Eclipse Service Centre:
planeteclipse....
Tech Support (USA, Canada, Latin America & Mexico)
supportusa@planeteclipse.com
Tech Support (Europe & Rest Of The World)
supportuk@planeteclipse.com
2605
i really love this marker, coming from a Dye, these are so easy to maintain and so reliable.
In the manual is calls for a #007 oring for the reg body.
I got my gtek 6 months ago with 25k shots or so. The gun shoots fine but shot velocity’s are very inconsistent. Would doing this help fix that?
btw Wera makes a nice set of pliers with nylon tip covers that work great for stuff like this
Is it possible to take apart the pops asa ? Because i just bought the gtek 170r i havent even took it to the field or shot paint threw it and it sounds like the asa is leaking
Did you fix it ? I had the same problem after 5 cases of paintballs I reassembled the solenoid and now it works fine weird because I didn’t do anything but take it apart and put it back together I tried the regulator at first and still was leaking then I did the solenoid put it back and now it’s good
I played a tournement yesterday and found that I had adjusted my 170 velocity to the max and was shooting on average 260-290 fps...gi5star, but had dimples on some balls. I was wondering if something might be wonky with my gun or not. I just feel adjusted all the way up it should be averaging around 300, possibly more...
I also had a PE soft tip bolt in as well.
if the paint isnt bore matched alot of air can slip past when the guns turned up
@@boppernostopper8598 ck oring #13
How can you access the 008 internal oring to change it out?
How often should I do this
Prolly every 5 cases
@@warpedspeed05 That seems a little excessive. Thats like two matches in NXL. I would say every 30-50 cases but honestly I only do it when I feel like the gun might need it.
The 14x2 NBR 70 doesnt fit on my regulator piston... Instead i had to use a #014 NBR70 ... is there a mistake in the 170R manual?
My O-ring is to big to and my manual says the 007NRB70 O-ring on the reg body shows that it's a large O-ring but in my parts kit it's a small O-ring.