Python and OpenCV Based Face Tracking System Using Arduino

[@sha20042]

This is what I'm searching for bro ... Amazing

[@arccoplayz9550]

Glad you like it!

[@avansahu6121]

brother..can you help me make it?

[@inkyspirets2460]

@@avansahu6121 bot?

[@Codification_]

I was looking for something with EXACTALLY the same hardware and bracket you used, this was such a helpfull tutorial, you really made my day a lot easier!

[@avansahu6121]

brother..can you help me make it?

[@jocelynbelinda5284]

Wow🤩 amazing technology...

[@dribons]

great video, very helpful, Greetings from México

[@Jirayu.Kaewprateep]

📺💬 For filters group, face tracing how can you do⁉ 🥺💬 Convolution layer you can input matrix that response sensitive for shape or ratios see sample of duck tracking.
📺💬 The code ... 🥺💬 You are correct and that is possible when the image is small and low framerates for no lacggy but you can area them into 6 or more part that CV also do the same that is good API.
📺💬 May be that is because fast computer 🥺💬 NO because only face detection you still not implement other codes , try with complete project. that is intersting.

[@abdlazizrzgar9800]

That’s may help me , thanks!

[@avansahu6121]

brother..can you help me make it?

[@emmanuelsheshi961]

nice

[@techandarduino6834]

Great Video, can i use my Laptop's webcam instead of external one?

[@arccoplayz9550]

If you can move your entire laptop i guess yes.

[@avansahu6121]

brother..can you help me make it?

[@skillway]

The link provided is actually not working

[@arccoplayz9550]

I just checked it is working try again

[@skillway]

Still it's been loading for a long time and it's not opening maybe it's mine only issue ...anyways thanku so much for the reply bro❤.. if possible give me any means to contact you

[@vedantnalat1800]

Can you provide the components needed for the project

[@guliyevshahriyar]

thx

[@vidhishah5796]

Which camera re you using in this module

[@arccoplayz9550]

its a standard usb camera stripped apart

[@Hardly_working.]

I keep getting an error which is stating it cannot read the .xml file. Do you have any ideas or solutions to this problem?

[@arccoplayz9550]

what xml file are you referring to? there is only a .py file for the python and the .ino file for arduino code

[@Hardly_working.]

@@arccoplayz9550 the .xml file that is used for the haarcascade it is used in the third line

[@avansahu6121]

brother..can you help me make it?

[@adhamallam8292]

i need your help , how can i reach you ?

[@haowo.c]

help when i run the code in python the video doesn’t pop up?

[@arccoplayz9550]

Just check if you have all the libraries installed and also check you have the correct camera source selected. Anyways what error is popping up when you run it?

[@haowo.c]

@@arccoplayz9550 there isn’t a error message python says it’s complete when i run it and nothing happens

[@arccoplayz9550]

Does it say 1 or 0 at the end of the message?

[@NaveenKumar-uj1ds]

Bro all I need is a detailed video on how to make connections.Please try to upload it it's my sincere request.

[@arccoplayz9550]

As soon as possible i will

[@NaveenKumar-uj1ds]

@@arccoplayz9550 do at earliest possible bro

[@arccoplayz9550]

Yes definitely. Actually i take apart my projects after filming and make something else with the parts. So i have to finish the project i am currently working on then i can rebuild and film this. I am sorry for the delay.

[@AW-xj4un]

The connections are very straightforward, really. As said, the Arduino is not powerful enough to drive the servo motors, so they need a constant 5v from good power supply. The red wire on the servo is the +5v, the green or grey is the negative and the yellow goes to the Arduino. Pins 9 and 10, not 5 and 6 as the IDE sketch says. The connection to the PC is via USB.

[@NaveenKumar-uj1ds]

Bro I have tried making as per circuit diagram bu the servos are moving toofast and it's not working properly.

[@arccoplayz9550]

You can change the speed in the arduino code

[@NaveenKumar-uj1ds]

@@arccoplayz9550 Bro all I need is a detailed video on how to make connections.Please try to upload it it's my sincere request.

[@avansahu6121]

brother..can you help me make it?

[@Amit-tn5xz]

​@@arccoplayz9550how to change the speed....can you help me with this pls?

[@galalahmed708]

Hello ,when i run the code, I recieve an error of AttributeError: module 'serial' has no attribute 'Serial'. How can i fix this please?

[@arccoplayz9550]

That error comes when you dont have proper pyserial installed. Try reinstalling the latest version.

[@galalahmed708]

@@arccoplayz9550 thank you sir

[@dimas-8288]

Same with me

[@dimas-8288]

@@arccoplayz9550 already installed bu still can't run

[@arccoplayz9550]

Hi try checking the version of pyserial. If it is outdated install the latest one. Also try using a IDE like pycharm and use the debug feature.

[@prajwalaradhya1173]

which arduino board is being used in this?

[@arccoplayz9550]

I am using the arduino uno but you can use any arduino

[@abbasmasri9614]

How many servo motor did you use

[@arccoplayz9550]

2 servos

[@inkyspirets2460]

bros dumb

[@alexfernandesportrai]

What camera is used in the project please?

[@arccoplayz9550]

It is a standard usb webcam stripped down to the bare board. I would recommend one of those cheap 360p webcams as they are single board and easy to take apart.

[@alexfernandesportrai]

@@arccoplayz9550 thanks.

[@AW-xj4un]

Hello...great video and thanks for the help. I getting a camera index out of range error when I run the python code. Any ideas?

[@arccoplayz9550]

Umm i have never seen anything like that before. I guess mabey reinstall the libraries?

[@AW-xj4un]

@@arccoplayz9550 Thanks for the reply. It seems that the camera is not being initialised. What camera are you using and how is it opening the port to the camera? I am using the Arducam OV2640. It’s working fine with the Arducam host, with the Arduino code for the 2640 uploaded to the UNO. If the python code can’t get the data from the camera, that’s the issue isn’t it?

[@arccoplayz9550]

I havent used a arducam before. I do think that the camera is not detected. I am using a simple usb webcam stripped down to the bare pcb and strapped to the servos. Nothing to do with the arduino.

[@AW-xj4un]

@@arccoplayz9550 OK…
Thanks. I’ll try a different camera.

[@AW-xj4un]

@@arccoplayz9550 Hello again...just for info, the Arduino code doesn't activate the SPI for the camera. That explains the range error.

[@user-ic6on5ck8j]

Bro can you send me the circuit diagram

[@user-ej3oe2cx6k]

Is it easy if I will do this with a drone

[@arccoplayz9550]

Umm well in theory.... No not really but actually doing it is probaby REALLLY hard, especially testing. Though i would suggest you to go ahead and try. Let me know how it goes.

[@user-ej3oe2cx6k]

@@arccoplayz9550
I think the hardest thing is when to connect the drone with the model and let be a real time processing especially if I'll make the drone from the beginning not buying it

[@arccoplayz9550]

@@user-ej3oe2cx6k Yes. Making a drone is complex as it is but making it autonomous is even harder

[@luckyvarma5726]

Component name?

[@arccoplayz9550]

Which component?