Hot glue is not as strong as I would like for something like this I went with a plastic bonding epoxy and it’s built like a tank!! Thank you for sharing this!!
Just found this video, its very helpful thanks so much!! Can you tell me How wide the top of the bucket is , I need to order the plexiglass and make sure its the right width?
Hi luv .. I'm searching for all the materials to make one .. I seen you use rubber window seal as the gasket between the bucket and plexiglass .. do you happen to know which brand you bought ? I want to make sure I get the right one so it won't leak
Hi! Unfortunately I don’t remember the brand but either way you will have to finesse it a bit to make sure you cut it where it pushes together some but if not just put some sealant in between where the piece begins and ends if that makes sense
17 gallon Muck Bucket- I got from SmartPak online 1/8 inch thick 22inch diameter plexiglass-from amazon(you can buy a thicker glass but I wouldn’t go any thinner) 1/2 inch check valve but most suggest 3/4 metal check valve- Lowe’s (I’d say just get whatever will fit your vacuum better) I used a exacting knife to saw the extra plastic off my check valve so the vacuum would fit tightly 4 inch pvc COUPLING- Lowe’s I used a 5 inch hole saw for the hole in the plexiglass and the coupling fit in perfectly . I also used a hole say for the small hole the size of that would depend on the check valve you choose to buy. Hot glue to secure the pvc couple and check valve so that it wouldn’t move as well as no air escaping. And of course the hot glue to create grip for my balloon Vacmaster Vacuum-from Target
@@alexciasilvera9076 actually making it cost less than buying one online I looked up someone who makes one similar to this style and it’s like +400 making it is around 120ish
I made this and it worked great at first but now it won’t suck the balloon anymore :( any ideas as to why this Hapened ? It’s like the vacuum lost power or something
Depending on what you used to seal it it’s likely a sealant problem and not the vacuum …. Someone in the comments suggested using actual sealant instead of hot glue because the hot glue will give out over time
I’m no longer making them all the materials kept going up and price and really would have to charge what you could use to get an actual professional machine
You can use a balloon pump from the top yes! But what ever you use will need to completed seal the top while blowing the air inside the balloon from the top
@@balloonstunes2675 no the valve would still go in the same place with a balloon pump you are blowing ate in instead of pulling air out so with the balloon pump you would need to be able to attach your pump to like a hose connected to a disk that will cover the opening where the balloon is ….. if you Google balloon stuffing machine there are some that you can use a balloon pump with look up that kind to see the type of hose I’m talking about
@@balloonstunes2675 look at this link balloons.online/puff-n-stuff-balloon-stuffing-tool/?gclid=EAIaIQobChMIit_988Oc-QIVdhbUAR3OuAtmEAQYAyABEgKpKvD_BwE It will show the thing I’m talking about
@@KayyeAyyeKreAtions ok, I understand now 🥰 I thought that’s how it worked & someone commented on another video that I can’t use my pump because it blows air out instead of sucking it in and then I got super confused lol🤦🏻♀️😂
This is great !! I’m about to try building this.I was going to ask what seals between the plexiglass,but I seen answer in comments.Thank you for posting this.😀🎈🎈
Hi! The parts list isn’t in her description to answer your question cause like U i too wanted the parts list it ACTUALLY in her comments, which is totally different frm description. But thanks for the video & the information that was given was very much helpful. Great JOB!! kayye Ayye🥰thanks
Thanks for this. It's beautiful. I would love a video .
Hubby pretty creative… nice..
Best video I've watched!
Great video, 👍👌👍
Yes a video would be awesome! I’m making this one
Great!
Wow! This is great!
This is so helpful thanks im trying it
This is the best diy ever! Thank you so much. I have thrown so many buckets away trying to make this
Thanks so much glad to help
I ran to lowes and grabbed what I needed after watching this
Brilliant!!
Love this clear so i can see in it
Love this !!! I would like to try to make this. I would be so much fun.
Hot glue is not as strong as I would like for something like this I went with a plastic bonding epoxy and it’s built like a tank!! Thank you for sharing this!!
Thanks for the info
No problem 👍
This is the best
Thanks! Hope it helped!
Awesome What inch is your window seal?
Just found this video, its very helpful thanks so much!! Can you tell me How wide the top of the bucket is , I need to order the plexiglass and make sure its the right width?
The plexiglass I used was 22inch
This is actually a great design. What are you using as the gasket on the top of the bucket?
4 inch coupling
Looks like window sealer
Can you make a list of items needed for the DIY thanks
What's that you have around on top of bucket under pixie glass? do the pixie come up when you fill the balloon up?
Its window seal. If you over fill the balloon it can push it up
Plz share a complete video how u completely made this
what did you use to cut your plexiglass
Hi luv .. I'm searching for all the materials to make one .. I seen you use rubber window seal as the gasket between the bucket and plexiglass .. do you happen to know which brand you bought ? I want to make sure I get the right one so it won't leak
Hi! Unfortunately I don’t remember the brand but either way you will have to finesse it a bit to make sure you cut it where it pushes together some but if not just put some sealant in between where the piece begins and ends if that makes sense
What size ballon to be used?? And what material ballon please help
i’d love to see a video of how you made it!
I have another video to show the exact tools I used for this
Do you have to run the vacuum the entire time you are working on a balloon?
No once it’s expanded it should stay open if your machine is sealed properly
What is the white stuff around the rim of the bucket?
Oh it’s rubber window seal
I know this video is 2 years old but I just made mine and when I turn on the vacuum my balloon is not inflating.
Can you tell me the pro
per names of the items you used please? I want one that looks like yours cause you can see through the lid! 🙋🏼♀️
Proper 🤦🏼♀️
17 gallon Muck Bucket- I got from SmartPak online
1/8 inch thick 22inch diameter plexiglass-from amazon(you can buy a thicker glass but I wouldn’t go any thinner)
1/2 inch check valve but most suggest 3/4 metal check valve- Lowe’s (I’d say just get whatever will fit your vacuum better)
I used a exacting knife to saw the extra plastic off my check valve so the vacuum would fit tightly
4 inch pvc COUPLING- Lowe’s
I used a 5 inch hole saw for the hole in the plexiglass and the coupling fit in perfectly .
I also used a hole say for the small hole the size of that would depend on the check valve you choose to buy.
Hot glue to secure the pvc couple and check valve so that it wouldn’t move as well as no air escaping. And of course the hot glue to create grip for my balloon
Vacmaster Vacuum-from Target
But making this cost more than getting one offline..
@@alexciasilvera9076 actually making it cost less than buying one online I looked up someone who makes one similar to this style and it’s like +400 making it is around 120ish
@@alexciasilvera9076 the starting price for one on Amazon is $298 and go up to $600
Can you give me the sku# for the 4 inch pvc coupling
Could you explain how you put the window sealant on the bucket
It comes with adhesive on it already I just removed the covering and stuck it on
@@KayyeAyyeKreAtions thank you 😊
@@elliehelm2597 no problem!
I made this and it worked great at first but now it won’t suck the balloon anymore :( any ideas as to why this Hapened ? It’s like the vacuum lost power or something
Depending on what you used to seal it it’s likely a sealant problem and not the vacuum …. Someone in the comments suggested using actual sealant instead of hot glue because the hot glue will give out over time
What do you have around the rim on the bucket?
I made hot glue gun knotches around the rim to hold the balloon
Can you post the link to the acrylic? Did you cut the outer edge?
It’s from Amazon I can’t find the exact one but search 22 inch diameter circle acrylic
How did u make the hole in the plexiglass please?
If you look at my second video I show the exact tool 😁
Excusa me how did you make the circle in the plexiglass?
I show the exact tool in another video
Wheres the other video? Lol I'm using your video to make a balloon stuffing before I purchase one. Thanks@KayyeAyyeKreAtions
Katy where did you order your balloons and what sizes
Amazon
Us party co
La balloons 18 inch stuffing balloons
love i would love to see how you did it
What is the balloon size?
Where did you get the top the glass
I got the top glass off Amazon
Is this the 70qt bucket off their site?
Yep!
What’s that rubber thing under the plexiglass
Window seal
What goes in between the plexiglass and the bucket to keep it air tight?
I used Window seal
@@KayyeAyyeKreAtions ok thanks
Is it a certain one mine i tried this and it eomt hold air long need help plz
Sorry i made this following you but it wont hold air
How do you stretch the balloon to get it on the pvc? I’m using 18” balloons and they just keep ripping.
I made a new video to show how I get mine on hope it helps
How wide is the 1/8 plexiglass
22in
Where you stay at and how much you want to make it
I’m no longer making them all the materials kept going up and price and really would have to charge what you could use to get an actual professional machine
I would like the information please.
Hello, can I receive the video if you still have it please!
I’m trying to write the materials
Can you list them pretty please thank you
They are listed in the description of my second video
Thank you
Do I have to use a vacuum? Or can I use my electric balloon pump?
You can use a balloon pump from the top yes! But what ever you use will need to completed seal the top while blowing the air inside the balloon from the top
So, I would have to put my valve at the top for my electric pump? Instead of at the bottom? I think I said that right lol 😊
@@balloonstunes2675 no the valve would still go in the same place with a balloon pump you are blowing ate in instead of pulling air out so with the balloon pump you would need to be able to attach your pump to like a hose connected to a disk that will cover the opening where the balloon is ….. if you Google balloon stuffing machine there are some that you can use a balloon pump with look up that kind to see the type of hose I’m talking about
@@balloonstunes2675 look at this link balloons.online/puff-n-stuff-balloon-stuffing-tool/?gclid=EAIaIQobChMIit_988Oc-QIVdhbUAR3OuAtmEAQYAyABEgKpKvD_BwE
It will show the thing I’m talking about
@@KayyeAyyeKreAtions ok, I understand now 🥰 I thought that’s how it worked & someone commented on another video that I can’t use my pump because it blows air out instead of sucking it in and then I got super confused lol🤦🏻♀️😂
I want instructions please
For some reason my ballon not blowing up
😟 maybe a seal issue?
Yes video please
This is great !! I’m about to try building this.I was going to ask what seals between the plexiglass,but I seen answer in comments.Thank you for posting this.😀🎈🎈
Parts list
Should be in the description
Hi! The parts list isn’t in her description to answer your question cause like U i too wanted the parts list it ACTUALLY in her comments, which is totally different frm description. But thanks for the video & the information that was given was very much helpful. Great JOB!!
kayye Ayye🥰thanks
@@kurriarogers4098 my mistake it’s in the description of the video titled “diy stuffer and tools used” my mistake 😊